Browse all bids
eProcureOpenWorks

Construction of shed for SPART/BWN at BWN along with maintenance pit, pathway and service building

Ministry of Railways

Office of the Sr. Divl. Engineer/Co-ordn/HWH Eastern Railway Howrah Howrah

Delivers to

Kolkata

Overview

22 facts from the tender

Ministry of Railways published this works tender on eProcure on 6 Oct 2026, for Kolkata. The estimated value is ₹4.7 Cr and the EMD is ₹9.3 L. It closes on 27 Oct 2026, 2:00 pm IST. Tender ID 92324508 · Ref 234_2026-27.

Timeline

  1. Published6 Oct 2026 · 1:33 pm
  2. Closes27 Oct 2026 · 2:00 pm

Bidding

Bid type
Open/Advertised
Contract type
Works - General · Expenditure
Tender type
Open
Tendering section
OA/2
Bidding system
Single Packet System
Bidding style
Single Rate for Tender
Validity of offer
60 days
Completion period
12 Months
Tender document cost
None
JV / consortium
Not allowed
Ranking order
Lowest to Highest
Expenditure type
Capital (Works)
Pre-bid meeting
None

Buyer

Inviting authority
HOWRAH DIVISION-ENGG/EASTERN RLY
Organisation type
Central Govt. Ministry/Department
Product category
Railway related Products
Location
Kolkata
Portal
eProcure
Inviting officer
DRM/HWH/ERHOWRAH DIVISION-ENGG/EASTERN RLY

Important dates

Published
6 Oct 2026, 1:33 pm IST
Bidding starts
13 Oct 2026
Closes
27 Oct 2026, 2:00 pm IST

Declarations by the buyer

  • Complies with the Public Procurement (Make in India) Order 2017
  • The tender inviting authority confirms this tender does not violate the GFR rules on procurement through GeM
  • Bidders from a country sharing a land border with India must be registered with the competent authority

Schedule of work

86 items
ItemQuantityRailways’ estimated rateAmount
Schedule A · Non Schedule Items (in/c GST)
1Drilling holes for sinking of 350mm dia x 200mm dia tube well by direct hydraulic rotary method or by rivers circulation as per IS:2800(Pt, 1-1991) in any kind os soil accept rock drilling of bore is to done in stages i.e. 500mm, 1st stage followed by enlarging the same to 600 mm dia as per direct of Engineer at site for housing the casing pipe. the rate includes supply of all tools & plants, labour, machine, compressor etc. for lowering and extracting the driving equipment complete in all respect.137 Metre₹1,867.77₹2,55,884.49
2Supplying, laying & jointing ERW MS 350 mm dia plain ended pipe as per IS : 3589- 1981 having minimum wall thickness of 6.35 mm end welding at site with two coats painting with anti-corrosive bituminus paint.52 Metre₹5,677.64₹2,95,237.28
3Supplying, laying & jointing ERW MS 200 mm dia plain ended pipe as per IS : 3589- 1981 having minimum wall thickness of 6.35 mm end welding at site with two coats painting with anti-corrosive bituminus paint.41 Metre₹2,743.34₹1,12,476.94
4Supplying & laying 200 mm nominal dia fiber glass reinforced epoxy resin strainer of 6mm thick wall thickness confirming to IS : 8110-1985.41 Metre₹5,760.09₹2,36,163.69
5Supply, fitting & fixing reducing socket, top cap, bottom plug, ball plug, centre guide etc.1 Set₹12,361.52₹12,361.52
66mm thick gravel packing in the annular space in between the bore hole and the T/Well assembling including supplying of washed pea sized gravel shold conform to IS : 4097-106751 cum₹1,742.24₹88,854.24
7Development of T/Well by heavy duty turbine pump or compressor with 7 days operation at least 8 hrs. per day including cleaning of all bentonite and complete in all respect.1 Job₹54,900.92₹54,900.92
8Test boring with 40mm dia pipe up to the depth as per instruction of Engineer at site complete.1 Job₹33,539.31₹33,539.31
9Supplying, fitting, fixing and erecting New P.S. Tank plate of 6mm th. In position upto ht. of 25m including supply of standard size bolts & nuts washer rubber insulating pad etc. after using 2 coats of bituminous paints of ISI brand in side of tank etc82 Sqm₹10,445.21₹8,56,507.22
10Supplying, fitting, fixing & erection water level indicator including 4" dia Niddle wheel flot valve for remove flaxible wire water gauge complete in all respects.9 Each₹13,387.02₹1,20,483.18
Schedule B · CPWD DSR 2023 Items (in/c GST)
1EARTH WORK // General // Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. // All kinds of soil.Escalation -10%850 cum₹260.30₹1,99,129.50
2EARTH WORK // General // Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. // All kinds of soilEscalation -10%900 Sqm₹34.15₹27,661.50
3EARTH WORK // General // Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.Escalation -10%640 cum₹2,123.75₹12,23,280
4CONCRETE WORK // CEMENT CONCRETE (CAST IN SITU) // Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing. // 1:1 1/2:3 (1 Cement: 1 1/2 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)Escalation -10%301 cum₹8,340.85₹22,59,536.27
5CONCRETE WORK // CEMENT CONCRETE (CAST IN SITU) // Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : // 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)Escalation -10%110 cum₹7,178.75₹7,10,696.25
6REINFORCEMENT CEMENT CONCRETE // STEEL REINFORCEMENT // Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. // Thermo-Mechanically Treated bars of grade Fe-500D or more.Escalation -10%25,845 Kg₹107.85₹25,08,644.92
7REINFORCEMENT CEMENT CONCRETE // STEEL REINFORCEMENT // Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. // Thermo-Mechanically Treated bars of grade Fe-500D or more.Escalation -10%21,937.85 Kg₹107.85₹21,29,397.41
8REINFORCEMENT CEMENT CONCRETE // DESIGN MIX CONCRETE // Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: // All works upto plinth level // Concrete of M25 grade with minimum cement content of 330 kg /cumEscalation -10%175 cum₹9,504.75₹14,96,998.13
9REINFORCEMENT CEMENT CONCRETE // DESIGN MIX CONCRETE // Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: // All works above plinth level upto floor V level // Concrete of M25 grade with minimum cement content of 330 kg /cumEscalation -10%190 cum₹9,860.40₹16,86,128.40
10REINFORCEMENT CEMENT CONCRETE // PRE-CAST RCC // Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).Escalation -10%50 cum₹10,585.90₹4,76,365.50
11REINFORCEMENT CEMENT CONCRETE // FORM WORK // Centering and shuttering including strutting, propping etc. and removal of form for // Foundations, footings, bases of columns, etc. for mass concreteEscalation -10%500 Sqm₹392.15₹1,76,467.50
12REINFORCEMENT CEMENT CONCRETE // FORM WORK // Centering and shuttering including strutting, propping etc. and removal of form for // Suspended floors, roofs, landings, balconies and access platformEscalation -10%440 Sqm₹927.25₹3,67,191
13REINFORCEMENT CEMENT CONCRETE // CAST IN SITU // Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : // 1:1.5:3 (1 cement : 1.5 coarse sand (zone- III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)Escalation -10%143 cum₹9,045.75₹11,64,188.02
14REINFORCEMENT CEMENT CONCRETE // CAST IN SITU // Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : // 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)Escalation -10%52 cum₹10,852.95₹5,07,918.06
15CONCRETE WORK // DAMP-PROOF COURSE // Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources)Escalation -10%129 Sqm₹410.85₹47,699.68
16MASONRY WORK // General // Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: // Cement mortar 1:6 (1 cement : 6 coarse sand)Escalation -10%41 cum₹7,132.25₹2,63,180.03
17MASONRY WORK // General // Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : // Cement mortar 1:6 (1 cement : 6 coarse sand)Escalation -10%352 cum₹9,105.95₹28,84,764.96
18WOOD AND P.V.C. WORK // MISCELLANEOUS-WOOD WORK // Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. // Fixed to openings /wooden frames with rawl plugs screws etc.Escalation -10%4,666 Kg₹238.35₹10,00,926.99
19STEEL WORK // General // Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Escalation -10%45,980 Kg₹133.70₹55,32,773.40
20STEEL WORK // General // Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Escalation -10%2,300 Kg₹117.35₹2,42,914.50
21FLOORING // VITRIFIED FLOOR TILES // Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. // Size of Tile 600x600 mmEscalation -10%147 Sqm₹1,553.45₹2,05,521.43
22FLOORING // TILE FLOORING // Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). // Dark shade pigment using ordinary cementEscalation -10%175 Sqm₹1,119.50₹1,76,321.25
23FLOORING // KOTA STONE FLOORING // Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : // 25 mm thickEscalation -10%411 Sqm₹1,948.25₹7,20,657.68
24FLOORING // CERAMIC GLAZED TILES // Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.Escalation -10%22 Sqm₹1,096.55₹21,711.69
25CLADDING WORK // STONE WORK DRY CLADDING // Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.Escalation -10%118 Sqm₹1,267.95₹1,34,656.29
26ROOFING // RAIN WATER SPOUT AND PIPE // Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. // 110 mm diameterEscalation -10%74 Metre₹377.40₹25,134.84
27ROOFING // RAIN WATER SPOUT AND PIPE // Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. // Bend 87.5 degree // 110 mm bendEscalation -10%26 Each₹150.35₹3,518.19
28ROOFING // SHEET ROOFING // Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. // 0.80 mm thick with zinc coating not less than 275 gm/m2Escalation -10%1,500 Sqm₹1,257.55₹16,97,692.50
29ROOFING // RAIN WATER SPOUT AND PIPE // Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : // 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)Escalation -10%96 Sqm₹1,355.80₹1,17,141.12
30FINISHING // CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT // 12 mm cement plaster finished with a floating coat of neat cement of mix : // 1:4 (1 cement: 4 fine sand)Escalation -10%1,268 Sqm₹425.55₹4,85,637.66
31FINISHING // EXTERIOR FINISHING // Finishing walls with textured exterior paint of required shade : // New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqmEscalation -10%2,445 Sqm₹223.60₹4,92,031.80
32FINISHING // 6 mm CEMENT PLASTER // 6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams.Escalation -10%221 Sqm₹396.65₹78,893.68
33FINISHING // EXTERIOR FINISHING // Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.Escalation -10%639 Sqm₹156.05₹89,744.35
34FINISHING // CEMENT PLASTER (IN FINE SAND) // 12 mm cement plaster of mix : // 1:6 (1 cement: 6 fine sand)Escalation -10%1,150 Sqm₹333.35₹3,45,017.25
35FINISHING // EXTERIOR FINISHING // Applying priming coat: // With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel worksEscalation -10%3,243 Sqm₹67.40₹1,96,720.38
36FINISHING // EXTERIOR FINISHING // Applying priming coat: // With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat)Escalation -10%687 Sqm₹36.10₹22,320.63
37WATER SUPPLY // PTMT FITTINGS // Providing and fixing PTMT bib cock of approved quality and colour. // 15 mm nominal bore, 86 mm long, weighing not less than 88 gmsEscalation -10%8 Each₹125.60₹904.32
38WATER SUPPLY // BRASS FITTINGS // Providing and fixing uplasticised PVC connection pipe with brass unions : // 30 cm length // 15 mm nominal boreEscalation -10%8 Each₹85₹612
39WATER SUPPLY // BRASS FITTINGS // Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : // 25 mm nominal boreEscalation -10%4 Each₹464.05₹1,670.58
40WATER SUPPLY // C.I. SLUICE VALVES/ FIRE HYDRANTS & FIXTURES // Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Escalation -10%10,000 Per Litre₹11₹99,000
41WATER SUPPLY // AIR VALVE & WATER METER (BULK TYPE) // Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gmsEscalation -10%3 Each₹156.90₹423.63
42STEEL WORK // General // Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. // Hot finished welded type tubesEscalation -10%6,750 Kg₹194.40₹11,80,980
43STEEL WORK // General // Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete.Escalation -10%16 Each₹226₹3,254.40
44STEEL WORK // General // Providing and fixing bolts including nuts and washers complete.Escalation -10%1,466 Kg₹159.35₹2,10,246.39
45STEEL WORK // General // Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. // In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all completeEscalation -10%748 Kg₹123.60₹83,207.52
46ROOFING // RAIN WATER SPOUT AND PIPE // Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.Escalation -10%750 Sqm₹738.65₹4,98,588.75
47ROOFING // RAIN WATER SPOUT AND PIPE // Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : // Ridges plain (500 - 600mm)Escalation -10%105 Metre₹532.35₹50,307.07
48ROOFING // RAIN WATER SPOUT AND PIPE // Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8 mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovings incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. // 2 mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6" ) as specifiedEscalation -10%340 Sqm₹1,401.35₹4,28,813.10
49SANITARY INSTALLATIONS // General // Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231,with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: // White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot restsEscalation -10%2 Each₹6,767.40₹12,181.32
50SANITARY INSTALLATIONS // General // Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: // White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar tapsEscalation -10%4 Each₹2,648.85₹9,535.86
51SANITARY INSTALLATIONS // General // Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.Escalation -10%4 Each₹1,683.35₹6,060.06
52SANITARY INSTALLATIONS // General // Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required : // Single squatting plate with 5 litre P.V.C. automatic flushing cisternEscalation -10%2 Each₹9,256.45₹16,661.61
53ROOFING // RAIN WATER SPOUT AND PIPE // Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : // Gutter (600 mm over all girth)Escalation -10%221 Metre₹1,313.70₹2,61,294.93
54WATER SUPPLY // C.P.V.C. PIPES // Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work // 40 mm dia nominal boreEscalation -10%550 Metre₹617.05₹3,05,439.75
55WATER SUPPLY // C.P.V.C. PIPES // Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work // 25 mm dia nominal boreEscalation -10%786 Metre₹467.75₹3,30,886.35
56WATER SUPPLY // C.P.V.C. PIPES // Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work // 15 mm dia nominal boreEscalation -10%1,200 Metre₹322.15₹3,47,922
57WATER SUPPLY // C.P.V.C. PIPES // Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work // 80 mm dia nominal boreEscalation -10%436 Metre₹1,041.70₹4,08,763.08
58FINISHING // EXTERIOR FINISHING // Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : // Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqmEscalation -10%3,432 Sqm₹193.70₹5,98,300.56
59WATER SUPPLY // PP-R PIPES // Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge. External work // PN - 10 Pipe, 90 mm OD (SDR-11)Escalation -10%1,248 Metre₹975.30₹10,95,456.96
60WATER SUPPLY // PP-R PIPES // Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge. External work // PN - 10 Pipe, 110 mm OD (SDR-11)Escalation -10%675 Metre₹1,301.35₹7,90,570.13
61FINISHING // EXTERIOR FINISHING // Painting with aluminium paint of approved brand and manufacture to give an even shade . // Two or more coats on new workEscalation -10%5,460 Sqm₹146.80₹7,21,375.20
62CLADDING WORK // STONE WORK DRY CLADDING // Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including:(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metallic colour of approved shades made out of 4 mm thick aluminium composite panel material consisting of 3 mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5 mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF /Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminium Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.Escalation -10%535 Sqm₹5,015.05₹24,14,746.58
63NEW TECHNOLOGIES AND MATERIALS // General // Providing and fixing 15 mm thick false ceiling tiles at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level on the existing frame work consisting of T-sections and Lsections suitably fixed according to tile size as per direction of Engineer-in-charge.Escalation -10%400 Sqm₹1,781.20₹6,41,232
64REPAIRS TO BUILDING // ROUTINE MAINTENANCE WORK // Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.Escalation -10%10 Each₹429.10₹3,861.90
65REPAIRS TO BUILDING // General // Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface including disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge. // For door/ window/ clerestory windowEscalation -10%32 Sqm₹1,264.35₹36,413.28
66CONCRETE WORK // MISCELLANEOUS // Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. // All works upto plinth level : // Concrete of M20 grade with minimum cement content of 270 kg /cumEscalation -10%100 cum₹9,212.60₹8,29,134
67DISMANTLING AND DEMOLISHING // General // Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. // Nominal concrete 1:3:6 or richer mix (including equivalent design mix)Escalation -10%75 cum₹2,434.25₹1,64,311.88
68DISMANTLING AND DEMOLISHING // General // Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. // In cement mortarEscalation -10%50 cum₹2,060.20₹92,709
69DISMANTLING AND DEMOLISHING // General // Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.Escalation -10%4,993.05 Kg₹5.65₹25,389.66
70DISMANTLING AND DEMOLISHING // General // Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.Escalation -10%50 cum₹3,551.25₹1,59,806.25
71ROAD WORK // MISCELLANEOUS // Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately).Escalation -10%110 cum₹9,823.80₹9,72,556.20
72ALUMINIUM WORK // General // Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : // For fixed portion // Powder coated aluminium (minimum thickness of powder coating 50 micron)Escalation -10%350 Kg₹530.90₹1,67,233.50
73ALUMINIUM WORK // General // Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): // With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)Escalation -10%50 Sqm₹1,505.25₹67,736.25
Schedule C · USSOR 2021 Items (in/c GST)
1Supply, fabrication and erection of steel members to replace existing corroded members of built up section made up of MS plate, angles, channels of different thickness and sizes including painting with one coat of ready mix paint Zinc Chromate priming to IS:104 followed by one coat of ready mix paint red-oxide Zinc Chrome priming paint to IS:2074. Structural steel should conform to IS:2062 E250- Grade'B0'. Fabrication and erection to be as per existing design initially by bolts and nuts and finally by rivetting during the sanctioned traffic block. Rate includes cutting of new steel work, removal of rivets by drilling, dismantling of any existing members required for inserting fabricated members, fixing of new fabricated built up members with all tools, plants, labour, consumables, machinery and accessories etc. Work will be executed as per IRS:B 1- 2001.Note: Painting shall be paid extra under relevant item.10 MT₹1,78,540.61₹17,85,406.10
2Hiring of machinery for minor miscellaneous works for short duration including operator/driver, fuel, lubricants and consumable. The contractor shall arrange all statutory permits as required by rules and regulations prevailing in the area of work. Payment shall be made for actual working hours at site. JCB Backhoe Loaders 3DX Plus or similar with minimum 1.10 cum bucket capacity24 Hour₹808.64₹19,407.36
3Hiring of machinery for minor miscellaneous works for short duration including operator/driver, fuel, lubricants and consumable. The contractor shall arrange all statutory permits as required by rules and regulations prevailing in the area of work. Payment shall be made for actual working hours at site. Hydra or similar tyre mounted Pick-n-Carry crane of 12T capacity for misc. works of handling of material24 Hour₹940.74₹22,577.76
Total₹4,66,49,968.84

The total matches the advertised value.

Documents

21 files

Documents to submit

Commercial-Compliance

  • Demand for the Financial Criteria, Association of Railway Officers, List of Arbitration cases, Court cases and Mandate for NEFT are to be uploaded with a scanned copy duly filled in and signed as per annexure no. IV, V, VI, VII, VIII respectively. These Annexures are available in View Document menu at Home page and is downloadable. The details of the uploaded documents should be produced whenever demanded for verification on written request at any point of time of the tender and contract within 7 days.

    Document required

  • Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

    Document optional

Technical-Compliances

  • Demand for the credential criteria both Technical and Similar nature of work and other technical details are to be uploaded with a scanned copy duly filled in and signed as per annexure no. I, II, III. These Annexures are available in View Document menu at Home page and are downloadable. The details of the uploaded documents should be produced whenever demanded for verification on written request at any point of time of the tender and contract within 7 days.

    Document required

Custom

  • Scanned copy of any other letters/documents etc. If agency intends to submit .

    Document optional

  • Format for certificate to be uploaded by Tenderer Along with the tender documents (Annexure-IX)

    Document required

  • As per 2nd amendment of GCC-2022 in case of other than company/ Proprietary Firm , Annexure-IX -A shall also be submitted by each member of a partnership firm, Joint Venture (JV) / Hindu Undivided Family (HUH / Limited Liability Partnership (LLP) etc. Non-submission of properly filled certificate in the prescribed format shall summarily be rejected of offer.

    Document required

  • Format for certificate of Bid Capacity Declaration to be uploaded by Tenderer Along with the tender documents (Annexure-XII)

    Document optional

  • Standard format of the Annual Contractual Turnover Data for the Previous 3/4 Years (Contractual Payment only) Declaration to be submitted mandatorily by the bidder is enclosed as Annexure 'XIV'. ( In case of tender value above 50 lakhs.)

    Document optional

Eligibility

Standard Financial Criteria

  • Financial Eligibility Criteria Advance Correction Slip No. 1) Ref: 2022/ce- i/ct/gcc-2022/policy dated- 14.07.2022) A. Para 10.2., Part I of GCC shall be read as under: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover under: Financial Eligibility Criteria: Advance Correction Slip No. 1) Ref: 2022/ce-i/ct/gcc-2022/policy dated- 14.07.2022) A. Para 10.2., Part I of GCC shall be read as under: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover under: The tenderers shall submit requisite information as per Annexure-XIV (as per tender document & NIT), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.

    Document required

Special Technical Criteria

  • Similar Nature of work "Any civil engineering work comprising of structural steel fabrication work"

    Document required

Standard Technical Criteria

  • ELIGIBILITY CRITERIA (FOR TENDERS OF VALUE ABOVE RS. 50 LAKHS) :

    1. The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender.
    2. In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for (b)
      1. Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components (b)
      2. In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b)
      3. To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 the Standard General Conditions of Contract or through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfillment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.
    Document required

  • Note for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirement as per clause 7 of the Standard GCC with prior approval of Chief Engg. in writing.

  • Note for Item 10.1 of GCC 2022: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.

    Document required

Partnership firm/Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.

  • Please submit a certificate in the prescribed format (please download the format from the link given below). Non submission of the certificate, or submission of certificate either not properly filled in, or in a format other than the prescribed format shall lead to summary rejection of your offer. ( Click here to download the Format of Self Certification)

Check each criterion against the tender notice before you bid.

Commercial conditions

EMD
₹933,000
Tender fee
None

Terms & conditions

5 conditions

Check Lst

  • A . Documents to be uploaded only in the website by the Tenderer Following Annexures duly filled and signed are to be uploaded online only prior to Closing of Tender. Original copy of all the documents to be submitted to office within 7 days whenever demanded by the Railway. Annexures are available at Upload/View Document menu in Home Page of IREPS portal for works tender.

    1. The details of the works completed by the tenderer during the last Seven years to be filled in Annexure-I.
    2. The details of Plants and Machinery with the tenderer to be filled in Annexure- II.
    3. Details of Personnel and Organization of the Tenderer to be filled in Annexure-III.
    4. Details of Works presently on hand of the Tenderer to be filled in Annexure- IV.
    5. The details regarding Association of Railway Officer s with the tenderer to be filled in Annexure- V.
    6. List of the Arbitration cases of the Tenderer during last Five years to be filled in Annexure-VI.
    7. List of the Court cases of the Tenderer during last Five years to be filled in Annexure- VII.
    8. NEFT MANDATE FORM. All Payments to the agency including the refund of the Earnest Money of the unsuccessful bidder preferably will be remitted through NEFT. The Tenderer is required to submit Bank details and A/C No. etc. in Annexure-VIII.
    9. Format for Certificate to be uploaded by Tenderer Along with the tender documents Annexure-IX and IX-A (As per GCC-2022 Annexure-V and V-A).
    10. GST COMPLAINT INVOICE Annexure-X
    11. LETTER OF CREDIT Annexure-XI,
    12. Bid Capacity Declaration Annexure-XII.
    13. Bid Security declaration Annexure-XIII and
    14. Annual Contractual Turnover Data Declaration Annexure-XIV (As per GCC-2022 Annexure-VI-B).

  • B . T h e tender offer complete in a l l respect and with all documents is t o b e submitted online by e-tendering process through the website www.ireps.gov.in before the closing time/date of this tender as mentioned in the NIT (Notice Inviting Tender). Tenderer can revise the bids any number of times till the closing time/date of the tender. No manual offers shall be accepted.

General Instructions

  • Tenderers are requested to go through the following documents which are available in upload/View Documents in Home page of IREPS portal for works tenders before submitting the e-tender.

    1. INSTRUCTIONS TO TENDERERS For e-Tenders-Chapter- I
    2. SPECIAL CONDITIONS OF CONTRACT-GENERAL - Chapter-II

  • Opening of e-tender 1 . The e-tenders will be opened online using the IREPS portal anytime after closing of the schedule date and time. No representative is required to be present for opening of e-tender and taking notes of rates quoted and ranking as the complete details of rates etc. of all the bidders shall be available to the bidders in the website after the opening of the tender. Note: For more details refer to Cl: 4 of General Instruction- Chapter-I for Submission of EMD.

  • In case the date of closing mentioned in the Notice Inviting Tender is declared a holiday/bandh/strike on any account, the date of closing tender online will not be changed as the application in the website of IREPS does not permit submission of any offer after closing date and time of the tender. However, opening of tenders online will be done next working day.

Bidder declarations (13)

Undertakings

  • I/ We have visited the works site and I / We am / are aware of the site conditions.

  • 1.0 WHEREAS the President of India acting through the Eastern Railway administration and their authorised officers has invited e-tenders for the above-mentioned work vide tender notice mentioned in the NIT Notice Inviting Tender published in the website. 2 . 0 AND WHEREAS I/We, have read the above NIT Notice Inviting Tender for e-tender, General instructions, Special Conditions-General, all special conditions and have purchased this e-tender document, have carefully read and understood the same, have visited the site and have satisfied myself/ourselves as to the nature of the work and site conditions before filling this e-tender. 3 . 0 AND WHEREAS my/our address for all communications hereinafter shall be considered as official and shall be made in the address, email Id and Mobile phone and other phone nos. given in the portal of IREPS while registering as tenderer for e-tender. In case of any change in this concerned officer of railway will be informed. 4.0 AND WHEREAS I/We state that in the event of this e-tender being unsuccessful, the aforesaid earnest money deposited by me/us may be refunded to me/us through NEFT. 5.0 AND WHEREAS I/We hereby sign this e-tender document digitally by virtue of the legal authorities vested with me/us to enter into commitment on behalf of the tenderer, documentary support whereof is enclosed herewith. 6.0 AND WHEREAS I/We have read and understood this e-tender document and agree to abide by the various terms and conditions contained therein. I/We also agree to keep the offer open for acceptance for a period of 45 days from the date fixed for closing of the same and in default hereof, I/We will be liable for forfeiture of my/our earnest money.

  • 7.0 Now, therefore I/We hereby submit this e-tender and offer to do the work for the Eastern Railway at the rates quoted in the schedule through online and hereby bind myself/ourselves to complete the work in all respects within the stipulated period of completion from the date of issue of the letter of acceptance of this tender. 8 . 0 And I/We agree to abide by the General Conditions of Contract 2022 editions and the Unified Standard Schedule of Rates Labour Materials of 2011 edition issued by the Eastern Railway, read with all correction slips issued thereto from time to time, and to carry out the works according to the special conditions and specifications of materials and works as laid hereunder in various chapters of this e-tender document. 9.0 And I/We have understood and accept the stipulation that full value of the earnest money shall stand forfeited without prejudice to any other right or remedies if: 1 . I/We do not execute the contract documents, in case my/our tender is accepted, within seven days after receipt of notice issued by the Railway that such documents are ready, o r 2 . I/we do not commence the work, in case my/our e-tender is accepted, within fifteen days after receipt of orders to that effect. 10.0 And until a formal agreement is executed, acceptance of this tender shall constitute a binding contract between us subject to modifications as may be mutually agreed between us and indicated in the letter of acceptance of my/our offer for this work. 11.0 And I/We agree to produce the details of the uploaded documents whenever demanded for verification on written request at any point of time of the tender and contract within 7 days.

Certifications

  • I/we the tenderer (s) am/are signing this document after carefully reading the contents.

  • I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.

  • I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.

  • I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.

  • I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.

  • I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.

  • I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.

  • I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.

  • I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.

  • I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)

Similar open tenders

Soonest first

Search similar in the explorerFind this tender in the explorer

Tender notice (PDF)