Browse all bids
eProcureOpenGoods

Maharashtra › Ministry of Railways

Ultrasonic thickness measuring gauge as

Ministry of RailwaysWaldhuni, Kalyan KALYAN

Mumbai CST

EMD Not required · Closes 28 Oct 2026, 11:30 am

Tender notice (PDF)

Ministry of Railways published this goods tender on eProcure on 7 Oct 2026, for Mumbai CST. no EMD is required. It closes on 28 Oct 2026, 11:30 am IST. Tender ID 107204581 · Ref 86265316.

Timeline

  1. Published7 Oct 2026
    10:43 am

Key figures

Estimated valueNot published

EMDNot required

Closing date28 Oct 202611:30 am IST

Key facts

Contract type
Goods · Expenditure
Tender type
Open - Indigenous
Tendering section
86
Bidding system
Single Packet
Evaluation
Itemwise/Consigneewise
Validity of offer
60 days
Tender document cost
None
Ranking order
Lowest to Highest
Pre-bid meeting
None
Inspection agency
CONSIGNEE
Approved sources
Not restricted
MSE reservation
Not reserved
Make in India
MII policy is not applicable for cases with Estimated Value is less than 5 Lacs
MSE purchase preference
25% of the quantity, within 15% of the lowest price
Inviting officer
ADMM/ELS/KYNELS/KALYAN/CENTRAL RLY
F.O.R
Destination

  • The tenderers in their bid shall indicate the details of their GST Jurisdictional Assessing Officers (Designation, Address & email id). In case of a contract award, a copy of Purchase Order shall be immediately forwarded by Purchaser to the GST Jurisdictional assessing officer mentioned in Tenderer's bid

  • Complies with the Public Procurement (Make in India) Order 2017

  • The tender inviting authority confirms this tender does not violate the GFR rules on procurement through GeM

About this tender

For complete description and other details, please refer to tender

Reference
86265316
Tender ID
107204581
Bid type
Open/Advertised
Product category
Railway related Products
Organisation type
Central Govt. Ministry/Department
Location
Mumbai CST
Portal
eProcure
Inviting authority
ELS/KALYAN/CENTRAL RLY

Items & delivery

Delivery schedule

Applies to
For all items
Completion
Within 45 Days

Item 1 PL 431002240029

Ultrasonic thickness measuring gauge as per annexure along with calibration certificate.

Total quantity2Numbers
Warranty
30 Months after the date of delivery
Stock category
Non Stock
Inspection agency
CONSIGNEE

Delivery destination

Sr. Section Engineer (TRS)INSP. KALYAN, CRMaharashtra

Documents

Documents to submit

Commercial-Compliance

  • Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

    Document optional

Eligibility

Special Eligibility Criteria

  • As per standard terms and condition of tender.

Terms & conditions

Payment Terms

  • 100% payment against receipt, inspection and acceptance of material by the consignee at destination.

Statutory Variation Clause

  • Statutory Variation in taxes and duties, or fresh imposition of taxes and duties by State/ Central Governments in respect of the items stipulated in the contract (and not the raw materials thereof), within the original delivery period stipulated in the contract, or last unconditionally extended delivery period shall be to Railways' account. Only such variation shall be admissible which takes place after the submission of bid. No claim on account of statutory variation in respect of existing tax/duty will be accepted unless the tenderer has clearly indicated in his offer the rate of tax/duty considered in his quoted rate. No claim on account of statutory variation shall be admissible on account of misclassification by the supplier/ contractor.

Standard Governing Conditions

  • IRS Conditions of Contract The contract shall be governed by latest version (along with all correction slips) of IRS conditions of contract, and all other terms and conditions incorporated in the tender documents.

  • General Conditions of Contract The contract shall be governed by latest version (along with all correction slips) of General Conditions of Contract, and all other terms and conditions incorporated in the tender documents.

General Instructions

  • OTHER TERMS AND CONDITIONS AS PER IMPORTANT TERMS AND CONDITIONS OF TENDER - LATEST UPDATED COPY IS ATTACHED. 5. OFFER VALIDITY: MUST BE VALID FOR MINIMUM 60 DAYS, FAILING WHICH THE OFFER SHALL BE TREATED AS COMMERCIALLY IRRESPONSIVE AND IS LIABLE TO BE IGNORED. 6. CONTRACT MAY BE PLACED ON A HIGHER TENDERER IN PREFERENCE TO THE LOWEST ACCEPTABLE OFFER, IN CONSIDERATION OF OFFER OF EARLIER DELIVERY. IN CASE OF FAILURE TO COMPLETE SUPPLIES IN TERMS OF SUCH CONTRACT WITHIN THE DATE OF DELIVERY SPECIFIED IN THE TENDER AND INCORPORATED IN THE CONTRACT, THE CONTRACTOR WILL BE LIABLE TO PAY TO THE GOVERNMENT THE DIFFERENCE BETWEEN THE CONTRACT RATE AND THAT OF THE LOWEST ACCEPTABLE TENDERER ON THE BASIS OF FINAL PRICE, F. O. R. DESTINATION ALL INCLUSIVE. 7. BIDDERS TO INDICATE THE HSN CODE OF THE TENDERED ITEM ALONG WITH THEIR GST REGISTRATION NUMBER IN THE REMARKS COLUMN. THE OFFER SHALL BE EVALUATED BASED ON THE GST RATE AS QUOTED BY EACH BIDDER AND SAME WILL BE USED FOR DETERMINING THE INTER SE RANKING. WHILE SUBMITTING OFFER IT SHALL BE THE RESPONSIBILITY OF THE BIDDER TO ENSURE THAT THEY QUOTE CORRECT GST RATE AND HSN NUMBER.PURCHASER SHALL NOT BE RESPONSIBLE FOR MISCLASSIFICATION OF HSN NUMBER OR INCORRECT GST RATE IF QUOTED BY THE BUILDER. WHEREVER THE SUCCESSFUL BIDDER INVOICES THE GOODS AT GST RATE OR HSN NUMBER WHICH IS DIFFERENT FROM THAT INCORPORATED IN THE PURCHASE ORDER, PAYMENT SHALL BE MADE AS PER GST RATE WHICH IS LOWER OFTHE GST RATE INCORPORATED IN THE PURCHASE ORDER OR BILLED. VENDOR IS INFORMED THAT HE/SHE WOULD BE REQUIRED TO ADJUST HIS/HER BASIC PRICE TO THE EXTENT REQUIRED BY HIGHER TAX BILL AS PER INVOICE TO MATCH ALL INCLUSIVE PRICE AS MENTIONED IN THE PURCHASE ORDER. ANY AMENDMENT TO GST RATE OR HSN NUMBER IN THE CONTRACT SHALL BE AS PER THE CONTRACTUAL OBLIGATIONS AND STATUTORY AMENDMENTS IN THE QUOTED GST RATE AND HSN NUMBER UNDER SVC.

Other Conditions

  • Consignee inspection against testing certificate and Guarantee / Warranty as per IRS Terms and Condition considerable on merit of case and pre-inspection by third party i.e RDSO/RITES/TPI for value more than Rs.5 LAKH(Rupees Five lakh ) compulsory.

    1. OFFER OF THE FIRMS HAVING POOR PAST PERFORMANCE WITH INDIAN RAILWAYS CAN BE PASSED OVER.
    2. BIDDERS HAVING PAST PERFORMANCE OUTSIDE CENTRAL RAILWAY MUST PROVIDE A COPY OF PURCHASE ORDER ALONG WITH ITS RECEIPT NOTE/ CERTIFIED CHALLAN, ELSE OFFER WILL BE PASSED OVER. PO COPY WITHOUT RECEIPT NOTE/CERTIFIED CHALLAN WILL NOT BE CONSIDERED AS A VALID PROOF OF PAST PERFORMANCE.
    3. OFFER CAN BE PASSOVER FOR BETTER DP.
    4. IN CASES WHERE SAMPLE NEEDS TO BE APPROVED BEFORE BULK SUPPLIES, IF THE FIRM FAILS TO SUPPLY THE SAMPLE WITHIN STIPULATED TIME OR IN CASE OF REJECTION OF SAMPLE, PO IS LIABLE TO BE CANCELLED.
    5. BIDDER AGREES TO PROVIDE THE REQUIRED SERVICE and REPLACEMENT DURING THE WARRANTY/GUARANTEE PERIOD OF THE MATERIAL SUPPLIED, FAILING WHICH RECOVERY OF THE PAYMENT WILL BE DONE. WARRANTY PERIOD TO BE INDICATED IN THE REMARKS COLUMN.
    6. MATERIAL TO BE SUPPLIED IN ORIGINAL MANUFACTURERS PACKING, MATERIAL WITHOUT ORIGINAL PACKING TAMPERED PACKING WILL BE REJECTED

  • Note Request for the Tender enquiry to be consider on email IdSmmd.elskyn@gmail.com

Special Conditions

  • 1.The offer shall be evaluated based on the GST rate as quoted by each bidder and same will be used for determining the inter-se ranking. While submitting offer, it shall be the responsibility of the bidder to ensure that they quote correct GST rate and HSN number. 2 It shall be the responsibility of the bidders to quote correct HSN number and corresponding GST rate. The Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST rate, if quoted by the bidder. 3. Wherever, the successful bidder invoices the goods at GST rate or HSN number which is different from that incorporated in the Purchase order, payment shall be made as per GST rate which is lower of the GST rate incorporated in the Purchase order or billed. 4. Vendor is informed that she/he would be required to adjust her/his basic price to the extent required by higher tax bill as per invoice to match the All Inclusive Price as mentioned in the Purchase Order. 5 . Any amendment to GST rate or HSN number in the contract r, under SVC. 6. shall be as per the contractual conditions and statutory amendments in the quoted GST rate and HSN number

Technical-Compliances

  • 1. Wherever SD has been exempted, for any reason, and the supplier fails to supply goods as per conditions of contract, as amended from time to time, Purchaser shall have right to levy damages from the supplier for failing to comply with the contractual conditions, not by way of penalty, an amount equal to SD amount, as would have been applicable if the contract was with a non- exempted vendor, These damages shall be treated as recoveries outstanding against the vendor and dealt with accordingly. Apart from claiming damages from vendors (as detailed below), in case of failure to comply with the contractual obligations, Railways shall record poor performance of the vendors for taking suitable penal action as per extant instructions

Bidder declarations (1)

Check List

    1. FOR TENDERS HAVING A PARTICULAR BRAND / MAKE RESTRICTION BIDDERS MUST EXPLICITLY MENTION THE NAME OF THEIR OFFERED BRAND / MAKE IN THE REMARKS COLUMN AND MUST ALSO ATTACH THE CATALOGUE HAVING TECHNICAL DETAILS AND SPECIFICATIONS. BIDS HAVING NO MENTION OF A PARTICULAR BRAND / MAKE WILL BE CONSIDERED AS INCOMPLETE AND ARE LIABLE TO BE IGNORED.
    2. FOR PURCHASE ORDER VALUE MORE THAN Rs.5 LAKH INSPECTION WILL BE DONE BY RITES/RDSO/TPI AT MANUFACTURERS PREMISES ONLY. BIDDERS MUST MENTION NAME & COMPLETE ADDRESS OF THE MANUFACTURER WORKS IN THE REMARKS COLUMN. BIDS HAVING NO SUCH MENTION ARE LIABLE TO BE IGNORED. ANY DEVIATION FROM THIS CONDITION MAY BE BROUGHT OUT CLEARLY IN THE REMARKS COLUMN.
    3. TENDERERS MAY NOTE THAT THEIR OFFERS MAY LIKELY BE IGNORED OR MAY NOT BE CONSIDERED FOR PLACEMENT OF ORDER IF THEIR OFFERED DELIVERY PERIOD IS IN VARIATION FROM THE DELIVERY PERIOD AS SPECIFIED IN THE TENDER SCHEDULE. OFFERED DELIVERY SCHEDULE SHOULD CLEARLY INDICATE THE STARTING TIME, QUARTERLY RATE OF SUPPLY AND FINISHING TIME. OFFERS WITH DELIVERIES NOT AS PER THIS CLAUSE MAY NOT BE CONSIDERED FOR PLACEMENT OF ORDER. FOR OFFERS WITH VAGUE DELIVERY SCHEDULE LIKE - AS PER YOUR REQUIREMENTS- OR INDEFINITE LIKE -02 TO 12 MONTHS- OR LIKE -06 TO 08 MONTHS-, DP SHALL BE GIVEN AS PER THE REQUIREMENT BEST SUITED TO THIS OFFICE WITHIN THE QUOTED RANGE. NO FURTHER CLAIM BY THE BIDDER SHALL BE ADMISSIBLE IN SUCH CASES.

Preferences & relaxations

Fees & money

EMD
Not required
Tender fee
None

Important dates

Published
7 Oct 2026, 10:43 am IST
Closes
28 Oct 2026, 11:30 am IST

Similar open tenders

Search similar in the explorerFind this tender in the explorer