Browse all bids
eProcureOpenWorks

i) Sealdah-Provision of Stabling Lines at Wood Gola Siding of Sealdah Coaching Yard.ii) Electrical work in connection with SDAH-provision of 750Volt supply by Compact Substation, 01 no for NCC, 02 no…

Ministry of Railways

CONTROL BUILDING-1st Floor, DRM OFFICE, KAIZER STREET KOLKATA, SEALDAH Kolkata

Delivers to

Kolkata

Overview

22 facts from the tender

Ministry of Railways published this works tender on eProcure on 8 Oct 2026, for Kolkata. The estimated value is ₹6.1 Cr and the EMD is ₹12.3 L. It closes on 30 Oct 2026, 4:00 pm IST. Tender ID 90191426 · Ref ELEG-OT-1340-2026-27.

Timeline

  1. Published8 Oct 2026 · 3:44 pm
  2. Closes30 Oct 2026 · 4:00 pm

Bidding

Bid type
Open/Advertised
Contract type
Works - General · Expenditure
Tender type
Open
Tendering section
ELE/G/SDAH
Bidding system
Single Packet System
Bidding style
Single Rate for Each Schedule
Validity of offer
60 days
Completion period
18 Months
Tender document cost
None
JV / consortium
Not allowed
Ranking order
Lowest to Highest
Expenditure type
Capital (Works)
Pre-bid meeting
None

Buyer

Inviting authority
SEALDAH DIVISION-ELECTRICAL/EASTERN RLY
Organisation type
Central Govt. Ministry/Department
Product category
Railway related Products
Location
Kolkata
Portal
eProcure
Inviting officer
Sr.DEE/G/SDAHSEALDAH DIVISION-ELECTRICAL/EASTERN RLY

Important dates

Published
8 Oct 2026, 3:44 pm IST
Bidding starts
16 Oct 2026
Closes
30 Oct 2026, 4:00 pm IST

Declarations by the buyer

  • Complies with the Public Procurement (Make in India) Order 2017
  • The tender inviting authority confirms this tender does not violate the GFR rules on procurement through GeM
  • Bidders from a country sharing a land border with India must be registered with the competent authority

Schedule of work

100 items
ItemQuantityRailways’ estimated rateAmount
Schedule I · NS Schedule - (Cabling & Wiring Works)
1Supply o f H T XLPE insulated aluminium cable armoured of size 3 x 120mm2, 11KV grade.(Cable Make: Havells/Gloster/Polycab/RR Kabel/KEI/ Mescab/ Fort Gloster)400 Metre₹1,319₹5,27,600
2Cable trenching, laying, refilling with bricks & sand, rising, jointing, socketing where necessary as per General Specification. (The cable trench should be of minimum 1000 mm depth) (L.T.Cable will be supplied by railway)550 Metre₹125₹68,750
3Cable laying through 2" dia. GI Pipe along with supply of GI Pipe as per General Specification. (G.I. Pipe Make: TATA/ Jindal / Bansal ) (L.T.Cable will be supplied by railway)125 Metre₹312₹39,000
4Cable laying through 3" dia. GI Pipe along with supply of GI Pipe as per General Specification. (G.I. Pipe Make: TATA/ Jindal / Bansal ) (L.T.Cable will be supplied by railway)75 Metre₹454₹34,050
5Cable laying through 4" dia. GI Pipe along with supply of GI Pipe as per General Specification. (G.I. Pipe Make: TATA/ Jindal / Bansal ) (L.T.Cable will be supplied by railway)50 Metre₹1,280₹64,000
6Drawing of L.T. cable through PF wall / Structure by cleating / clamping etc as per General Specification. (L.T.Cable will be supplied by railway)205 Metre₹41₹8,405
7Drawing of LT cable in Concealed way through PF wall / structure / building wall etc. as per General specification. 'L' hook should be provided at approx. every half meter length.(L.T.Cable will be supplied by railway)155 Metre₹70₹10,850
8Cable laying through pucca duct and refilling with sand and covering the duct.(L.T.Cable will be supplied by railway)200 Metre₹77₹15,400
9Construction of driving and reception pits to laying of 160mm dia HDPE pipes (PE80,PN6,IS:4984-1995)(with supply of HDPE pipe) by Micro-tunneling method under the road, foothpath, rail track etc. As per required depth to laying and inserting LT/HT XLPE cable of suitable size through HDPE pipes.(HDPE Pipe Make: Skipper/ Capital Polyplast/ Chaika Polymers/ Utkarsh/Ashirvad/Arpan/Ori Plast) (L.T.Cable will be supplied by railway)1,000 Metre₹1,516₹15,16,000
10Butt welded joint for micro tunneling work with laying of 160 mm dia HDPE pipes.(one joint for every six mtr length)167 Numbers₹669₹1,11,723
11Construction of driving and reception pits to laying of 110mm dia HDPE pipes (PE80,PN8,IS:4984-1995)(with supply of HDPE pipe) by Micro- tunneling method under the road, footpath, rail track etc. As per required depth to laying and inserting of LT/HT XLPE cable through HDPE pipes.(HDPE Pipe Make: Skipper/ Capital Polyplast/ Chaika Polymers/ Utkarsh/Ashirvad/Arpan/Ori Plast) (L.T.Cable will be supplied by railway)2,100 Metre₹1,492₹31,33,200
12Butt welded joint for micro tunneling work with laying of 110 mm dia HDPE pipes.(one joint for every six mtr length)350 Numbers₹444₹1,55,400
13Trenching and laying of LT cable(4-core, 50 mm² to 120 mm², 1100V grade) underground by soil cutting through 75 mm dia HDPE pipe along with supply of HDPE pipe (PE100, PN10, IS:4984), without sand and bricks including refilling of trench by excavated soil and make good of surface as its original condition, (The cable trench should be of minimum 1000 mm depth).(HDPE Pipe Make: Skipper/ Capital Polyplast/ Chaika Polymers/ Utkarsh/Ashirvad/Arpan/OriPlast) (L.T.Cable will be supplied by railway)1,250 Metre₹310₹3,87,500
14Trenching and laying of LT cable(4-core, 16 mm² to 35 mm², 1100V grade) underground by soil cutting through 50 mm dia HDPE pipe along with supply of HDPE pipe (PE100, PN10, IS:4984), without sand and bricks including refilling of trench by excavated soil and make good of surface as its original condition, (The cable trench should be of minimum 1000 mm depth).(HDPE Pipe Make: Skipper/ Capital Polyplast/ Chaika Polymers/ Utkarsh/Ashirvad/Arpan/Ori Plast) (L.T.Cable will be supplied by railway)1,250 Metre₹200₹2,50,000
15Drawing of LT cable through inside of GI octagonal/tubular pole for loop in & loop out.240 Metre₹18₹4,320
16Supply of HDPE Role Pipe of 50mm dia (PE80,PN8,IS:4984-1995) and laying the same pipe under pathway before construction work of Pathway.(HDPE Pipe Make: Skipper/ Capital Polyplast/ Chaika Polymers/ Utkarsh/Ashirvad/Arpan/OriPlast)1,000 Metre₹63.34₹63,340
17Supply of HDPE Role Pipe of 75mm dia (PE80,PN8,IS:4984-1995) and laying the same pipe under pathway before construction work of Pathway.(HDPE Pipe Make: Skipper/ Capital Polyplast/ Chaika Polymers/ Utkarsh/Ashirvad/Arpan/Ori Plast)5,100 Metre₹115.81₹5,90,631
18Drawing of LT cable through inside of above HDPE pipe of different size.(L.T.Cable will be supplied by railway)6,100 Metre₹18₹1,09,800
19Supply,installation,testing and commissioning of indoor end jointing kit(heat shrinkable) suitable for HT XLPE insulated Al Conductor cable of size 3core, 240sq.mm, 11kV/6.6kV grade complete with all accessories along with jointing of the H.T. Cable by License holder Cable Jointer only.(Kit Make: Raychem RPG/Yamuna Densons/ 3M / Polycab)2 Numbers₹14,499₹28,998
20Supply, installation, testing and commissioningof straight through cable jointing kit (heatshrinkable) suitable for HT XLPE insulated AlConductor cable of size3core,240sq.mm,11kV/6.6kV grade completewith all accessories along with jointing of theH.T. Cable by License holder Cable Jointer only.(Kit Make: Raychem RPG/Yamuna Densons/ 3M / Polycab)1 Numbers₹37,735₹37,735
21Supply of heat shrinkable type indoor end jointing kit suitable for XLPE insulated stranded Al. Conductor cable of size 3 core x 120mm2 11000V grade complete with all accessories along with jointing of the HT cable by License holder cable jointer only. (Kit Make: Raychem RPG/Yamuna Densons/ 3M / Polycab)20 Numbers₹16,297₹3,25,940
22Supply of Heat shrinkable type straight through cable jointing kit suitable for XLPE insulated, stranded Al, conductor cable of size 3 x 120 mm2, 11 KV / 6.6 KV grade complete with all accessories along with Jointing of the H.T. Cable by License holder Cable Jointer only.(Kit Make: Raychem RPG/Yamuna Densons/ 3M / Polycab)2 Numbers₹22,566₹45,132
23Jointing of LT XLPE insulated cable (4 core 240mm2 to 4 core x 300mm2, 1100V grade) using indoor/outdoor LT heat shrink end termination kit,including supply of kits complete with all accessories and execution of jointing work by a certified and licensed cable jointer.(Kit Make: Raychem RPG/Yamuna Densons/ 3M / Polycab)56 Numbers₹3,917₹2,19,352
24Jointing of LT XLPE insulated cable (4 core x 240 to 4 core x 300mm2, 1100V grade) using LT heat shrinkable straight through jointing kit,including supply of kits complete with all accessories and execution of jointing work by a certified and licensed cable jointer.(Kit Make: Raychem RPG/Yamuna Densons/ 3M / Polycab)5 Numbers₹8,264₹41,320
25Jointing of LT XLPE insulated cable (4 core 150mm2 to 4 core x 185mm2, 1100V grade) using indoor/outdoor LT heat shrink end termination kit,including supply of kits complete with all accessories and execution of jointing work by a certified and licensed cable jointer.(Kit Make: Raychem RPG/Yamuna Densons/ 3M / Polycab)40 Numbers₹2,880₹1,15,200
26Jointing of LT XLPE insulated cable (4 core 150mm2 to 4 core x 185mm2, 1100V grade) using LT heat shrinkable straight through jointing kit,including supply of kits complete with all accessories and execution of jointing work by a certified and licensed cable jointer.(Kit Make: Raychem RPG/Yamuna Densons/ 3M / Polycab)4 Numbers₹5,408₹21,632
27Jointing of LT XLPE insulated cable (4 core 70mm2 to 4 core x 120mm2, 1100V grade) using indoor/outdoor LT heat shrink end termination kit,including supply of kits complete with all accessories and execution of jointing work by a certified and licensed cable jointer.(Kit Make: Raychem RPG/Yamuna Densons/ 3M / Polycab)160 Numbers₹2,742₹4,38,720
28Jointing of LT XLPE insulated cable (4 core 70 to 4 core x 120mm2, 1100V grade) using LT heat shrinkable straight through jointing kit,including supply of kits complete with all accessories and execution of jointing work by a certified and licensed cable jointer.(Kit Make: Raychem RPG/Yamuna Densons/ 3M / Polycab)4 Numbers₹3,691₹14,764
29Jointing of LT XLPE insulated cable (4-core, 25mm² to 50mm², 1100V grade) using LT heat shrinkable straight-through jointing kits, including supply of kits complete with all accessories and execution of jointing work by a certified and licensed cable jointer.(Kit Make: Raychem RPG/Yamuna Densons/ 3M / Polycab)5 Numbers₹2,993₹14,965
30Jointing of LT XLPE insulated cable (4 core 25mm2 to 4 core x 50mm2, 1100V grade) using indoor/outdoor LT heat shrink end termination kit,including supply of kits complete with all accessories and execution of jointing work by a certified and licensed cable jointer.(Kit Make: Raychem RPG/Yamuna Densons/ 3M / Polycab)236 Numbers₹2,565₹6,05,340
31Wiring of light point with 1.5 sq.mm PVC copper wire FRLSH through PVC conduit pipefrom inside JB withporcelain fuse kit-kat / MCB of rating 16 A to top of G.I Octagonal pole 4 mt. longalong with copper ECC of size 1.5mm2 as per General specification of IE Rule. (PVC WireMake:Havells/ Gloster/ Polycab/ RR Kabel/ KEI/Mescab/Fort Gloster)192 Numbers₹229₹43,968
32Wiring of Light and Fan points with 1.5 sq.mm., PVC insulated 1100V grade FRLSH singlecore,M/Strand copper wire through suitable size (ISI marked) PVC conduitpipe/casing/concealed way along with ECC of 1no. 1.5 sq.mm. , PVC insulated single core, M/StrandFRLSH copper wire as per General specification of IE Rule. (PVC wire Make:Havells/Gloster/Polycab/RR Kabel/KEI/Mescab/Fort Gloster) (Switch & Plug Socket Make: Panasonic/ Anchor/GMModular/ Legrand/Crabtree/ Havells/Hager)105 Numbers₹412₹43,260
33Wiring of 6 Amp plug board consisting with one 6A plug socket and one 6 ampswitchby 2 nos. single core FRLSH grade, PVC insulated, copper conductor wire of size 1.5 mm2,1100V grade for phase and neutral alongwith 1 no. single core FRLSH grade, PVC insulated,copperconductor wire of size 1.5 mm2, 1100V grade for Earth Continuty Conductor (ECC) throughsuitablesize (ISI marked) PVC conduit pipe/casing/ concealed way as per General Specification of I.E.Rule.(PVC Wire Make: Havells/ Gloster/ Polycab/ RR Kabel/ KEI/Mescab/ Fort Gloster) (Switch & Plug SocketMake:Panasonic/ Anchor/ GM Modular/ Legrand/Crabtree/ Havells/Hager)12 Numbers₹183₹2,196
34Wiring of 16 Amp./ 6 pin plug board consisting with one 16A plug socket and one16amp switch by 2 nos. single core FRLSH grade, PVC insulated, copper conductor wire of size 4mm2,1100V grade for phase and neutral alongwith 1 no. single core FRLSH grade, PVC insulated,copperconductor wire of size 2.5 mm2, 1100V grade for Earth Continuty Conductor (ECC) throughsuitablesize (ISI marked) PVC conduit pipe/casing/ concealed way as per General Specification of I.E.Rule.(PVC Wire Make: Havells/ Gloster/ Polycab/ RR Kabel/ KEI/Mescab/Fort Gloster) (Switch & Plug SocketMake:Panasonic/ Anchor/ GM Modular/ Legrand/Crabtree/ Havells/Hager)8 Numbers₹512₹4,096
35Supply, laying, and termination of sub-main wiring comprising 2 run of 4mm² singlecorecopper conductor PVC FRLSH insulated wires, along with one run of 2.5mm² copper EarthContinuity Conductor (ECC), through suitable size (ISI marked) PVC conduit pipe/casing/ concealedway as per General Specification of I.E. Rule.(PVC Wire Make: Havells/Gloster/ Polycab/ RR Kabel/KEI/Mescab/Fort Gloster)300 Metre₹160₹48,000
36Supply, laying, and termination of main/sub-main wiring comprising 2 run of 6mm² multi-stranded single- core copper conductor PVC FRLSH insulated wires, along with one run of 2.5mm² copper Earth Continuity Conductor (ECC), through suitable size (ISI marked) PVC conduit pipe/casing/ concealed way as per General Specification of I.E. Rule.(PVC Wire Make: Havells/Gloster/ Polycab/ RR Kabel/KEI/Mescab/Fort Gloster)50 Metre₹163₹8,150
Schedule II · NS Schedule - (LED Luminaires) (LED luminaries should cover awarranty of 60(sixty)months from the date of commissioning.)
1Designing of mounting layout, Supply, installation, connection and commissioning of integrated LED TUBE LIGHT 4ft. luminaires 1 X 20W (approx.) (Extruded Aluminium LED Batten) (IP:20) (indoor type) as per General Specification, including fixing with G. I. clamps made of G. I. Flat of suitable size & G. I. Nut, bolts etc.(Make - Bajaj/ Philips/ Havells/ Crompton/Panasonic/ Orient/Signify/Ecolink)27 Numbers₹542₹14,634
2Designing of mounting layout, Supply, installation, connection and commissioning ofLED luminaire 4ft., 2X18W or above (min. IP:20, indoor type) including batten complete with allaccessories as oer General Specification, including fixing with G. I. clamps made of G. I. Flat ofsuitable size & G. I. Nut, bolts etc.(Make - Bajaj/ Philips/ Havells/ Crompton/Panasonic/ Orient/Signify/Ecolink)21 Numbers₹995₹20,895
3Design of mounting layout ,Supply, installation for LED street light luminaires of approximately 90W rating, having a minimum system efficacy of 120lm/W. The luminaires shall be housed in pressure die-cast aluminium enclosures and conform to minimum IP65 protection rating or higher as per General Specification. Installation/fixing of street light fitting should be made with existing/supplied arm bracket of G.I. pole / Rail pole.(Make - Bajaj/ Philips/ Havells/ Crompton/Panasonic/ Orient/Signify/Ecolink)10 Numbers₹6,600₹66,000
4Design of mounting layout ,Supply, installation for LED street light luminaires of approximately 90W rating, having a minimum system efficacy of 120lm/W. The luminaires shall be housed in pressure die-cast aluminium enclosures and conform to minimum IP65 protection rating or higher as per General Specification. Installation/fixing of street light fitting should be made with suitable dia. G. I. bend pipe with G. I. clamps made of G. I. Flat of suitable size & G. I. Nut, bolts etc.(Make - Bajaj/ Philips/ Havells/ Crompton/Panasonic/ Orient/Signify/Ecolink)18 Numbers₹6,741₹1,21,338
5Designing of mounting layout ,Supply, installation using suitable GI arrangement, of LED Flood Light Luminaire 60W (approx) with high pressure die cast housing complete with all accessories as per General Specification.(LED luminaires should conform to min IP:65) (for fixing at octagonal pole)(Make - Bajaj/ Philips/ Havells/ Crompton/Panasonic/ Orient/Signify/Ecolink)192 Numbers₹6,469₹12,42,048
6Designing of mounting layout ,Supply, installation of LED Flood light Luminaire 300W(approx), system efficacy>= 120lm/W with high pressure die cast housing complete with all accessories and conform to minimum IP66 protection rating or higher as per General Specification. Installation/fixing should be made by suitable GI clamping arrangement etc.(Make - Bajaj/ Philips/ Havells/ Crompton/Panasonic/ Orient/Signify/Ecolink)95 Numbers₹13,335₹12,66,825
7Designing of mounting layout, Supply, installation, connection and commissioning of Dual Colour LED Acrylic Name Sign Board (Indication Light, Colour: Red & Green) bi-lingual ,230VAC complete with hanging arrangement. (Size:12"x24") including fixing with G. I. clamps made of G. I. Flat of suitable size & G. I. Nut, bolts etc.1 Numbers₹4,087₹4,087
8Supply, installation, testing & Commissioning of energy efficient, maintenance free Diamond Boards with imported translucent Fibre material 3mm acrylic outdoor material 28 gauge GI sheet with spray print LED fittings, ACP sheet 3mm, 1""X 1"" MS pipe with red oxide complete square Signage with all accessories.(ACP Sheet make:Aludecor/Alstone/Eurobond)44 Square Foot₹2,360₹1,03,840
Schedule III · NS Schedule - (General Electrical Works)
1Supply, concrete foundation & erection of GI Octagonal Pole 4mtr. Pole section bottom dia 130mm, top dia 70mm, pole thickness-3mm with Flange OD 200x200x12mm with 4nos. foundation bolts having 20mm dia & without arm bracket Galvanized Coating Thk:65 micron including inbuilt Junction Box as per Sr.DEE/G/SDAH's drawing no.: SDAH/G/7/2024 Dt.04/11/2024 and as per General Specification. Concrete foundation, erection & commissioning of G.I Octagonal Pole should be grouted by supplied 04 Nos. foundation bolts. Construction grade M-20(1:2:4).(Make-B. P. Projects/Transrail/Crompton/ Bajaj/Utkarsh)96 Numbers₹9,638₹9,25,248
2Supply, fixing, testing and commissioning of star rated BLDC Ceiling fan, 1200mm sweep, 3 blade (Blade material :High grade Aluminium alloy),Service value:Minimum 7.5, 230V, 50 c/s, and all other accessories (Without Remote) as per General Specification including fixing of ceiling fan with suitable clamping arrangement &'S' hook etc.(Make: Havells/ Usha/ Anchor/Orient/Crompton/ Bajaj/Atomberg)9 Numbers₹2,991₹26,919
3Supply, Fixing, connection & commissioning of A.C. Exhaust Fan, 300 mm sweep, 230V, 50 c/s complete with all accessories including fixing with G. I. clamps made of G. I. flat of suitable size & G. I. Nut, Bolts alongwith necessary Masonry works.(Make: Havells/ Usha/ Anchor/Orient/Crompton/ Bajaj)10 Numbers₹1,262₹12,620
4Supply, Fixing, connection & commissioning of A.C. Metallic Exhaust Fan, 225 mm sweep, 50 c/s complete with all accessories including fixing with G. I. clamps made of G. I. flat of suitable size & G. I. Nut, Bolts alongwith necessary Masonry works.(Make: Havells/ Usha/ Anchor/Orient/Crompton/ Bajaj)4 Numbers₹1,257₹5,028
5Supply, Fixing with suitable G.I clamping arrangement, connection and commissioning of Wall Mounting Air Circulator Fan, 3 blades, 600 mm sweep, 230 V, 50 c/s complete with all accessories.(Make: Havells/ Usha/ Anchor/Orient/Crompton/ Bajaj)6 Numbers₹7,839₹47,034
6Supply of pedestal fan 450mm sweep, 1 Ph,complete with all accessories.(Make: Havells/ Usha/ Anchor/Orient/Crompton/ Bajaj)2 Numbers₹3,223₹6,446
7Supply, installation, testing, and commissioning of single-phase 8-way MCB distribution board (surface/concealed mounting type), comprising the following components:a) 1 No. Double Pole MCB, 32A, 10kA breaking capacity (incoming)b) 6 Nos. Single Pole MCB, 10A, 10kA breaking capacity (outgoing)Work shall include complete incoming and outgoing wiring terminations, provision of all necessary mounting hardware, accessories, and interconnections, executed as per site conditions and in compliance with IS/IEC standards.(Switchgear Make: Siemens/ ABB/ Schneider/ Lauritz Knudsen/C&S/Havells/Legrand/ Hager)2 Set₹2,299₹4,598
8Supply, installation, testing, and commissioning of 3-phase, 4-way TP&N vertical type distribution board (metal double door enclosure, IP:43 rated), comprising the following components:a) 1 No. MCCB, 4-pole, 50-63A, breaking capacity 25kAb) 12 Nos. MCB, single-pole, 16-32A, breaking capacity 10kAThe distribution board shall be fixed using suitable ISI-marked G.I. fixtures and accessories, complete in all respects as per site conditions and conforming to relevant IS/IEC standards.(Switchgear Make: Siemens/ ABB/ Schneider/ Lauritz Knudsen/C&S/Havells/Legrand/ Hager)3 Set₹14,696₹44,088
9Supply and fixing of Mobile Charging points with hylam sheet cover consisting of a)Plug Socket 5Pin/6Amp. - 3 nos. b) Piano Switch 6 Amp - 3 nos. c) MCB SP 6Amp, B/cap10KA. - 1 no.d) LED indication lamp - 1no, including wiring with 2.5 mm2 single core, multi strand, PVC FRLSH Cuwire through suitable size (ISI marked) PVC conduit pipe/ casing/ concealed way and along withcopper ECC of size 1.5 mm2 as per general specification of IE Rule.(PVC Wire Make: Havells/ Gloster/Polycab/RR Kabel/ KEI/Mescab/Fort Gloster) (Switch & Plug Socket Make: Panasonic/ Anchor/ GMModular/Legrand/Crabtree/Havells/Hager) (Switchgear Make: Siemens/ ABB/ Schneider/ LauritzKnudsen/C&S/ Havells/Legrand/ Hager)3 Numbers₹902₹2,706
10Supply and fixing of multi-plug board for Computer power points with hylam sheetcover consisting of a) Plug Socket 5Pin/6Amp. - 3 nos. b) Piano Switch 6 Amp - 3 nos.c) Plug Socket 6Pin /16 Amp. - 1 no. d) Piano Switch, 16 Amp - 1 no. e) MCB SP 16Amp,B/cap:10KA. - 1 no. f) LEDindication lamp - 1no. including wiring with 2.5 mm2 single core, multi strand, PVC FRLSH Cu wirethrough suitable size (ISI marked) PVC conduit pipe/ casing/ concealed way and along with copperECC of size 1.5mm2 as per general specification of IE Rule.(PVC Wire Make: Havells/ Gloster/Polycab/RR Kabel/ KEI/Mescab/Fort Gloster) (Switch & Plug Socket Make: Panasonic/ Anchor/ GMModular/Legrand/Crabtree/Havells/Hager) (Switchgear Make: Siemens/ ABB/ Schneider/ LauritzKnudsen/C&S/ Havells/Legrand/ Hager)2 Numbers₹977₹1,954
11Dismantling of old transformers, LT switchgears, LT panel Boards, Bus-bars etc. and handed over the same to the consignee Store along with transportation.3 Job₹1,00,300₹3,00,900
12Dismantling of existing damaged Rail Pole/Tubular Pole. Rail Pole/Tubular Pole to becut by Gas cutter from the least bottom level. Released Rail Pole to be stacked in an isolated areaapart from platform. Released Tubular Pole to be deposited to the custody of concerned Sr. SEE (G)by the Firm. Exposed Cables to be cleared or buried in to the ground14 Numbers₹717₹10,038
13Supply, fixing, testing & commissioning of wall mounted copper busbar chamber of capacity 200A, 4 way, complete with all accessories.(Switchgear Make: Siemens/ ABB/ Schneider/ LauritzKnudsen/C&S/ Havells/Legrand/ Hager)10 Set₹14,285₹1,42,850
14Dismantling/release of different size LT / HT cable from sub-station and shed and deposit to Consignee store.Exposed cables to be cleared or buried into the ground .250 Metre₹38₹9,500
15Dismantaling and Transportation of existing transformer, including loading and unloading from Sub-station to Store as and when required basis.2 Job₹53,559₹1,07,118
16Dismantling of HT panel(4 panel) of new Sickline Substation including transportation loading unloading & necessary masonry works etc and handing over to consignee store.1 Set₹70,800₹70,800
17Dismantling, shifting, repairing and reinstallation of defective High Mast Tower of 20 Mtr.height with all complete accessories i.e. all integral power tool, control panel, flood light fittings with lantern Carriage of High Mast Tower Including design and construction of RCC foundation depending upon the height, wind speed and terrains Including erection, testing and commissioning of above High Mast Tower including foundation accessories alongwith Earthing with 2 nos. of 50mm dia, 3 Mtrs. long heavy gauge Gl pipe with construction of earth pit and necessary earth connection from pit to tower by two separate 40mm x 6mm GI flat with GI nuts & bolts.4 Numbers₹81,480₹3,25,920
18Supply of Compact Secondary Sub- station withTransformer of rating 1000KVA, ratio 6KV/750VDry type including loading, unloading and transportation of CSS as per General Specification.5 Set₹43,87,033₹2,19,35,165
19Installation, Testing and Commissioning of above CSS with RCC foundation (L=3300mm, W=2400 mm & H=2500mm) including pucca duct (L=13.3 ft, W=1 ft., Depth=2 ft.) along with construction of iron shed structure with transparent sheet top cover and MS grill structure duty painted at four sides of CSS.5 Set₹4,91,544₹24,57,720
20Supply of out door type FEEDER PILLAR BOX for 750V LT supply system outdoor type IEC 61439-1&2 compliant fully type tested LT MS Feeder pillar box with comprising of the following;i) MCCB 750V, 630A, 4 pole, 36 KA microprocessor based release for O/L, S/CProtection - 2 nos. ii) Digital Multifunction meter suitable for operation in 750V system- 02 nos. iii) Supply and fixing of CT suitable foroperation in 750V system - 06 nos. iv) LED Indication Lamp - 06 Nos. (3ph), and internal connection of the above multifunction meter.,Indication Lamp etc. along with (provision of suitable holes for Z/S Coupler in Feeder Pillar) (Weight of coupler - 15 kgs & hole dia= 20 cm) and internal wiring of Z/S Coupler (ZS coupler willbe supplied by Rly.) by single core 95 mm2 multistrand insulated FRLSH Cu wire 1.1 KV grade.(Make: Siemens/ ABB/ Schneider/ Lauritz Knudsen/ C&S/Havells/ Legrand/Hager)10 Set₹1,30,123₹13,01,230
21Fixing, Testing and Commissioning of indoor/outdoor Feeder Pillar along with Incoming and Outgoing connection, necessary masonry works for fixing of the feeder pillar etc.10 Set₹14,459₹1,44,590
22Supply of energy efficient submersible pump set of capacity 10000 GPH, at 180ft.(approx) head with suitable motor of capacity 15 HP,3 Ph.,50 Hz, 415 V complete with all accessories including flat copper conductor cable of 2 x 3 core x 4sq. mm. of length 30 m. (Motor to starter panel for connection)(Pump Make: Kirloskar Brothers/ Crompton/ M&P/ KSB/ Beacon)2 Set₹90,137₹1,80,274
23Supply of uPVC column pipe 3" diameter 3 meter length, thickness 10.00 mm - 11.24 mm at ends, safe allowable hydrostatic pressure upto 26 kgf/cm2 and one socket.14 Numbers₹7,316₹1,02,424
24Supply of SS super heavy bottom adapter of 3 inch dia along with 3" dia uPVC small piece, SS flange and guard SS rod of similar make.4 Numbers₹4,520₹18,080
25Supply of SS super heavy top adapter of 3" dia2 Numbers₹4,520₹9,040
26Supply & fitment of 3 inch dia CIDF Sluice Valve of reputed make having ISI mark for discharge pipeline.1 Numbers₹7,997₹7,997
27Supply and fitment of suitable size wellcover, 2 x 30 mts. Poly-propylene ropes and two pair of heavy duty suitable size pump resting clamps and motor body clamp (MS) for above submersible pump motor set.1 Job₹13,298₹13,298
28Installation, commissioning and testing of all above pump-motor set etc. including transportation charges.1 Set₹10,551₹10,551
29Supply and fitment of 3" dia. Heavy 'T' with flange and short piece.1 Numbers₹1,600₹1,600
30Supply and fitment of pressure gauge with cock of any ISI mark.1 Numbers₹632₹632
31Reconditioning of 500KVA 6kV/415V or 250 KVA 6kV/415V transformer with the following works: (supplied by Rly.)i)Dismantling of transformer i.e. Transformer oil is to be drained completely and then top cover is to be removed and lifting of the Core & coil assembly. ii) Perform all the testing of the transformer as per IS-2026 and check. If it is OK, then the transformer assembly is put into the Baking Chamber for two to three days to be heated up to 80°C due to raise the IR value up to the desired level.iii) All Gaskets are needed to be replaced iv) The heated transformer is needed to bebox up in a clean tank. v)The filling up of transformer oil after proper filtrationvi)Transportation from Railway premises toworkshop and return to site.2 Job₹1,05,600₹2,11,200
32Installation, commissioning and testing of 500KVA/ 250 kVA indoor transformer including necessary masonry work.2 Job₹35,200₹70,400
33Supply and fixing of industrial wall plug socket of cap 16/20A single phase (conforms to IS:13032 & IS 8623) on the metallic frame, 2 pole and earth, provision of 20A DP MCB.(Switchgear Make: Siemens/ ABB/ Schneider/ LauritzKnudsen/C&S/ Havells/Legrand/ Hager)12 Numbers₹1,671₹20,052
34Supply of 75KVAR Automatic power factor correction panel( LT APFC Panel Board) 415V 3 Ph system complete with all accessories.(Make: Siemens/ ABB/ Schneider/ LauritzKnudsen/C&S/ Havells/Legrand/ Hager)2 Set₹2,27,620₹4,55,240
35Installation, commissioning and testing of above APFC Panel by necessary fixtures.2 Set₹39,939₹79,878
36Supply of HT Megger, 2500V, 5000 Mega Ohm.((Make: Shanti/Rishabh/or Similar)1 Numbers₹7,821₹7,821
37Supply, installation, testing and commissioning of 10 panel HT VCB 6KV, 800A, 26.3kA indoor type floor mounted with suitable CT ratio type DNED with VCB type VS 11/25 and motor operated spring controlled mechanism including measuring instrument selector switch, Cu. busbar etc. complete with all accessories as per General Specification including transportation charges.(2 incoming + 07 outgoing including 01 buscoupler) (Make: Siemens/ ABB/ Schneider/ LauritzKnudsen/ Havells/Legrand/ Hager)1 Set₹98,76,000₹98,76,000
38Supply, installation & commissioning of fire fighting equipment & personel protective equipment consisting of the following : i) Arc Flash Suits - Level -4 , Arc Flash Kits 40 cal/cm², Coverall Style type of size XL/XXL as per general specification - 01 Setii) Safety Footware As per IS: 15298 ( Part- 2) : 2011, Suitable for 11kV Grade, of size/ 08/09/10 as per general specification - 02 Pairiii) HT Hand Gloves - Class 2 Gloves as per IS: 4770-1991, Size- 360 mm (Aprox.) suitable for operating 11KV switchgears as per general specification - 02 Pairiv) Fire Ball Extinguisher (Auto Fire Off or Similar), 1.25 kg, for Fire Class - 'C' as per general specification - 10 Nos. v) HT Insulating Mat- B Class Mat as per IS: 15652 : 2006, Size- 10 Mtr. (Length) X 1 Mtr. ( Wide) X 2.5 mm (Thickness) as per general specification - 04 Set.vi) G.I FIRE Bucket12 Ltr. capacity round bottom duly painted filled with dry sand as per general specification - 10 Nos.vii) Necessary M.S angle structure for hanging of the Fire Bucket ( 02 Bucket in each Stand) as per general specification - 05 setviii) Shock treatment chart duly laminated and framed as per general specification - 2 set. ix) Layout circuit diagram painted on hylem sheet of supply distribution system as per general specification - 2 Nos.x) Fire fighting chart duly laminated and framed as per general specification - 2 set.xi) Insulated, Single Phase, Telescopic Earth/Discharge Rod (11-33KV Grade) - 02 setxii) GI Trunk Box of size: 36'' X 22'' X 16'' - 02 Nos.xiii) Supply & Fixing of First Aid Box - 02 Nos.1 Set₹1,27,523₹1,27,523
39Design, Supply, Installation, testing and commissioning of MS fabricated, hinged type cubicle panel board made of (14 SWG) MS sheet duly powder coated, comprising with the following :- a)MCCB 500-630A,4 pole B/Cap-50kA-2 nos.b)MCCB 320-400A 4 pole B/Cap-36kA-4 nos.c)MCCB 200-250A, 4 Pole,B/Cap:36kA - 4 nos., Copper Busbar 4 bar type, 1000A - 1 set. Digital multifunction meter-02 nos,Digital ammeter-08 nos,including internal electrical connection with suitable size of wire / bar with modular LED indicators etc. along with transportation charges. (Switchgear Make:Siemens/ ABB/ Schneider/ Lauritz Knudsen/ Havells/Legrand/ Hager/C&S) (Meter Make: Selec/Secure/Lauritz Knudsen/HPL/Schneider)2 Set₹5,11,065₹10,22,130
40Design, Supply, Installation, testing and commissioning of MS fabricated,painted LT cubicle Panel(14SWG) comprising of:a) LT ACB 1250A, 4 Pole, MDO, TM, B/Cap:50KA-3nos.(1 bus coupler)b) LT ACB 800A, 4 pole, B/cap - 50kA -2 nos. c) LT ACB 630A, 4 pole, B/cap - 50kA-8 nos d) Copper busbar 4 bar type 2000A - 1 set,e) Digital Multifunction energy meter,3Ph complete-13nos, including internal connection with copper wire / bar with proper Copper socketting and ,selector switches and Modular LED indicators etc. alongwith transportation charges. (Switchgear Make:Siemens/ ABB/ Schneider/ Lauritz Knudsen/ Havells/Legrand/ Hager/C&S) (Meter Make: Selec/Secure/Lauritz Knudsen/HPL/Schneider)1 Set₹36,62,105₹36,62,105
41Supply Installation testing & connection of MCCB 80-100 Amp, 4 pole B/Cap 25kA,415V in a suitable wall mounted 2 outdoor type Glass Fiber reinforced Polyester Enclosure including locking arrangements and provision of power cable loop in and loop outarrangement with proper rated groomets(Switchgear Make:Siemens/ ABB/ Schneider/ Lauritz Knudsen/ Havells/Legrand/ Hager/C&S)2 Set₹27,486₹54,972
42Supply Installation testing & connection of MCCB 160-200 Amp, 4 pole B/Cap 35kA,415V in a suitable wall mounted 2 outdoor type Glass Fiber reinforced Polyester Enclosure including locking arrangements and provision of power cable loop in and loop out arrangement with proper rated groomets.(Switchgear Make:Siemens/ ABB/ Schneider/ Lauritz Knudsen/ Havells/Legrand/ Hager/C&S)2 Set₹39,898₹79,796
43Design, Supply, Installation, testing and commissioning of MS fabricated, wall/floor mounted hinged type cubicle panel board made of (14 SWG) MS sheet duly powder coated, comprising with the following :- a)MCCB 500-630A,4 pole B/Cap-50kA-2 nos.b)MCCB 200-250A, 4 Pole,B/Cap:36kA - 6 nos.,c)MCCB 100-125A, 4 pole, b/cap. 36 KA - 4 nos.Copper Busbar 4 bar type, 1000A - 1 set.including internal electrical connections with suitable size of wire / bar and provision of digital type LT CT operated multifunction energy meter,3 ph,4 wire: 2 nos. ; digital Ammeters with CT and modular LED indicators etc.along with transportation charges.(Switchgear Make:Siemens/ ABB/ Schneider/ Lauritz Knudsen/ Havells/Legrand/ Hager/C&S) (Meter Make: Selec/Secure/Lauritz Knudsen/HPL/Schneider)2 Set₹4,66,770₹9,33,540
44Supply, fabrication, installation, commissioning and testing of wall mounted outdoor type Glass Fiber Reinforced polyester Enclosure including locking arrangements for providing power supply to Welding Machine, Battery Charging Machine etc. consisting with the following (1)63A, 5-pin, 3-phase, 50Hz industrial plug socket assembly - 01 set (2) 20A, 3-pin, 1-phase, 50Hz. industrial plug socket assembly -01 Set (3) MCCB 100/80A, 4-pole, B/Cap-25KA-01 No. (4) MCB DP 20A- 01 No. (5) Copper Bus bar 4 Bar type 100A Capacity-01 SetIndustrial Plug Socket Assembly made of PA 6 material confirming to IS/IEC 60309 1 & 2, IP Rating: IP 44 and IP 67. Along with internal connection by suitable size of copper wire, socketing etc. and provision of power Cable loop in and loop out arrangement with proper rated grommets.(Switchgear Make:Siemens/ ABB/ Schneider/ Lauritz Knudsen/ Havells/Legrand/ Hager/C&S)(Enclosure Make:CAPE/Hensel/Legrand/Grasp/Sintex)81 Set₹42,572₹34,48,332
45Supply & fixing of L Shape Hot dipped GI angle 50 X 50 X 6 mm with wall structure etc. including necessary fabrication works for fixing of glass fiber enclosure.(Enclosure Make:CAPE/Hensel/Legrand/Grasp/Sintex)650 Metre₹93₹60,450
46Design, Supply, Installation, testing and commissioning of MS(14 SWG) fabricated, duly powder coating painted, hinged type Cubicle Panel Board comprising of the following- a) MCCB 63A, 4 pole, B/Cap-25 kA, 415 V, 50 Hz- 1 No., b) MCCB 32 A, 4 pole, B/Cap-25 kA, 415 V,50 Hz - 1 No., c) MCB SPN 16 A, B/Cap-10 kA -1 No.,d) FASD Starter in sheet steel enclosure - 1 No., e) Current sensing Phase failure with dry run O/Lprotection - 1 no., f) Automatic Time Switch (Daily Dial type) - 1 No., g) Copper Bus-Bar (3Ph., 4 bar type) with braiding ofsuitable size according to load along with Analog/Digital type Voltmeter (1 no.), Ammeter (1 no.) with CTs and Selector switches including Phase indicator with LED lamps & ON/OFF indicator lamps (02 Nos.) etc. along with transportation charges.(Switchgear Make:Siemens/ ABB/ Schneider/ Lauritz Knudsen/ Havells/Legrand/ Hager/C&S) (Meter Make: Selec/Secure/Lauritz Knudsen/HPL/Schneider)1 Set₹59,550₹59,550
47Supply,fixing,testing and commissioning of light control panel with contactor and electro mechanical timer comprising of the following -1) MCB 32A, Three pole,10KA,415V,50Hz - 1 No.,2) Timer switch- 2 Nos.,3) Power Contactor,3pole,32A - 2 Nos.,4) Toggle switch 6A - 2 Nos.,5) LED Indicators, Indication R,Y,B - 5 Nos.6) Enclosure made of 14SWG GI sheet fabrication, Panel paint powder coated colour siemens gray and internal wiring with suitable size copper wire etc. (As per Sr.DEE/G/SDAH's drawing number, SDAH/G/1/2024 Dt. 26.02.2024).Fixing should be done by necessary GI fixture and connection with 70%,30% lighting circuit.(Switchgear Make:Siemens/ ABB/ Schneider/ Lauritz Knudsen/ Havells/Legrand/ Hager/C&S)6 Set₹9,598₹57,588
48Supply of 110 V Battery charging points suitable for operation on 150 volts DC supply system including erection on MS channel, foundation etc. complete.16 Numbers₹5,414.33₹86,629.28
49Installation, testing,commissioning and connection of 110Volt Batery Charging points with suitable support/ clamps etc.16 Numbers₹541.69₹8,667.04
50Supply of Battery Charger Unit suitable for charging of battery complete with silicon rectifier unit, naturally air cooled suitable for outdoor use including ammeters for Input AC and AC and output DC, selector switches, LED Indication output DC and voltmeters for input lamp for input and output supply, and other protective device of capacity- AC input: 415V, 3Ph, 50Hz and DC output: 110V-140V, 200A1 Numbers₹4,24,026.53₹4,24,026.53
51Installation, testing,commissioning and connection of 110Volt Batery Charger unit1 Numbers₹42,401.49₹42,401.49
52Supply and installation of GI Standard Earth pipe, 40 mm dia, 2000 mm long, medium gauge complete with provision of Earth pit and there connection with 4 SWG GI wire complete with testing and commissioning, strictly in accordance with relevant IS codes, electrical safety standards.as per Sr. DEE(G)/SDAH's Drg. No. SDAH/G/MISC/47 dt.21.11.2008(Alt-1).(G.I. Pipe Make: TATA/ Jindal / Bansal )96 Numbers₹837₹80,352
53Supply and installation of medium duty GI Earth Pipe of 50 mm dia., 3 Mtr. long, including proper connection with 8 SWG GI wire using suitable clamps and fasteners etc., complete with testing, commissioning, and in conformity with relevant IS codes, electrical safety standards.(G.I. Pipe Make: TATA/ Jindal / Bansal )17 Numbers₹1,007₹17,119
54Supply, erection, testing & commissioning of Earthing System with provision of 03 nos. GI standard Earth pipe of heavy gauge 2 inch dia, 2500 mm long complete with 01 no. earth pit, masonry work for Earth pit, pit cover, clamping connection of earth spikes as per Sr. DEE(G)/SDAH's Drg. no. SDAH/G/SS/113 dt. 06.03.09.(G.I. Pipe Make: TATA/ Jindal / Bansal )26 Set₹6,732₹1,75,032
55Supply and installation of G.I. strip of size 40 mm x 6 mm (thick), fixed along walls by grouting suitable size bolts with nuts at 450 mm intervals for earthing, including provision of necessary connections. The G.I. strip shall be separated from the wall using suitable size insulators with the bolts. The work shall be completed with testing and commissioning, strictly in accordance with relevant IS codes, electrical safety standards.490 Metre₹288₹1,41,120
56Supply and installation of G.I. strip of size 25 mm x 3 mm (thick), fixed along walls by grouting suitable size bolts with nuts at 450 mm intervals for earthing, including provision of necessary connections. The G.I. strip shall be separated from the wall using suitable size insulators with the bolts. The work shall be completed with testing and commissioning, strictly in accordance with relevant IS codes, electrical safety standards.280 Metre₹120₹33,600
Total₹6,14,50,296.34

Bids quote a percentage above, below or at par with these rates · The total matches the advertised value.

Documents

11 files

Documents to submit

Commercial-Compliance

  • Upload scanned copy, in PDF format, of the complete address of the firm, contact no. pan no., etc. in a format to which all the correspondences shall be made by the Railway.

    Document optional
  • The power of attorney in the name of the person authorized to do all correspondence related to work along with resolution passed by the board of Director, affidavit stating that the tenderer is the sole proprietor of the said firm in case of proprietor firm. Copy of POA (Power of Attorney) may be attached.

    Document optional
  • Upload scanned copy, in PDF format, of any other letters/documents etc., the agency intends to submit.

    Document optional
  • Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

    Document optional

Technical-Compliances

  • Tenderer must submit valid Electrical Contractor license as per Indian Electricity Rules/CEA Regulations for the respective category of works along with Supervisory competency certificate (SCC) for the respective category of works issued by Government Electrical Licence Board on or before closing date of tender, otherwise tender will be summarily rejected.

    Document required

Eligibility

Standard Financial Criteria

  • The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. Please follow GCC-April-2022 for Annexure-VIB. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. [NOTE: Failing of submission of Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet shall be liable for rejection.] [NOTE: Client certificate from other than Govt Organization should be duly supported by Form 16A/26AS generated] through TRACES of Income Tax Department of India.]

    Document required

Standard Technical Criteria

  • The tenderer must have successfully completed or substantially completed any of the following during last 07(seven) years, ending last day of month previous to the one in which tender is invited: - Three similar works each costing not less than the amount equal to 30% of advertised value of the tender OR two similar works each costing not less than the amount equal to 40% of advertised value of the tender OR- One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (NOTE: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/ registered at least 5 years prior to the date of opening of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.) [NOTE: Failing to submit of appropriate document against the defined Similar Nature of Work issued by the competent authority shall be liable for rejection.] For details of substantially completed works IR- GCC-April-2022 or latest with all correction slips upto the date of closing of tender will be followed.

    Document required
  • Defination of Similar Work Execution, commissioning, operation and maintenance of HT (from 6 KV up to 11 KV) equipment for Central Government/ State Government/ SEB's/ PSU's. OR Operation, maintenance of 6 KV/11 KV, 11KV/415 Volt, 6KV/415 Volt Substation.

Partnership firm/Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.

  • Please submit a certificate in the prescribed format (please download the format from the link given below). Non submission of the certificate, or submission of certificate either not properly filled in, or in a format other than the prescribed format shall lead to summary rejection of your offer. ( Click here to download the Format of Self Certification)

Check each criterion against the tender notice before you bid.

Commercial conditions

EMD
₹1,229,000
Tender fee
None

Terms & conditions

24 conditions

Commercial-Compliance

  • Bidder must follow Public Procurement Policy (Make in India) Order 2017, dated 15/06/2017, issued by Department of Industrial Promotion and Policy, Ministry of Commerce, circulated vide Railway Board letter no. 2015/RS(G)/779/5 dated 03/08/2017 and 27/12/2017. The definition and calculation of local content in accordance with the Make in India policy as approved by PCEE/ER is 50% of Minimum Local Content (MLC).

General Instructions

  • In case the office remains closed on the date of opening day of tender due to any unforeseen circumstances like bandh, strike, natural calamities, riot and civil commotion etc. The tender will be opened on the next working day at same time and place.

  • This Tender conforms to guidelines in GCC April 2022 and will be in conformity with amendment as made time to time thereafter.For any matters not specifically mentioned in this Tender Paper, the provision of General Condition of Contract (G.C.C. April 2022 or latest) for works as amended from time to time ,will govern this contract mutates mutandis.

  • Standard format for Guarantee Bond for security deposit is uploaded in document as ''GUARANTEE BOND FORSECURITY DEPOSIT''.

  • All rates of the items in the Schedules are inclusive of GST (GST Considered as 18%).The GST Act and Rules will be applicable.

  • For other terms and conditions with additional information, "Open E-Tender Document" uploaded herewith is to be referred.

  • Electrical works guideline in details will be as per "LT & HT Electrical Booklet" which has been uploaded in document separately.

  • LED Luminaries Specification in details will be as per "LED luminaries Specifications" which has been uploaded in document separately.

  • Deviations from the contract or the technical specifications if any, Railway Reserves Right to accept or reject the deviations or the offer if not acceptable without assigning any reason.

  • Location of Work Wood Gola Siding of Sealdah Coaching Yard and Calcutta Goods Yard.

Show all 24
  • Sr. SEE/G/SDAH-I (IC) is the overall supervision in-charge of the work. Day to day work will be looked after by concerned sectional Sr. SEE/G or JEE/G.

  • This contract includes site cleaning during the time of execution of the work by the successful bidder. Noncompliance of cleaning items after the work done to a satisfactory level, Railway will impose a penalty of maximum 0.05% of the contract value apart from holding up of payments for items pertaining to cleaning of works, which will be decided by Railway authority.

  • Any typographical error shall not be construed to be befitting of the Contractor. In such cases the interpretation and decision of Sr. DEE/ G/ SDAH shall be final and binding up on the tenderer.

  • The contractor shall strictly adhere to the 'Contract Execution Timeline and Deliverables' specified under Clause 34 of the Open E-Tender Document.

Special Conditions

  • Railways may however call for the originals of the credentials (if applicable)or submitted documents for verification or any clarifications/confirmations on the contents of the documents submitted.

    1. The Railway reserves the right of not to invite tenders for any of Railway work or works or to invite open or limited tenders and when tenders are called to accept a tender in whole or in part or reject any tender or all tenders without assigning reasons for any such action. In case if tender is accepted in part by Railway administration, Letter of Acceptance shall be issued as counter offer to the Tenderer, which shall be subject to acceptance by the Tenderer.
    2. Tenderer/s have to submit their technical and financial capabilities along with the tender, failing which their tender shall be liable for rejection.
    3. Tenderers are required to quote their Permanent Account Number.
  • As per clause 6, Part-I of Indian Railways Standard General Conditions of Contract, April, 2022, Care in Submission of Tenders: to be taken as under :-

  • Before submitting a tender, the tenderer will be deemed to have satisfied himself by actual inspection of the site and locality of the works, that all conditions liable to be encountered during the execution of the works are taken into account and that the rates he enters in the tender forms are adequate and all inclusive to accord with the provisions in Clause-37 of the Standard General Conditions of Contract for the completion of works to the entire satisfaction of the Engineer.

  • Tenderers will examine the various provisions of The Central Goods and Services Tax Act, 2017(CGST)/ Integrated Goods and Services Tax Act, 2017(IGST)/ Union Territory Goods and Services Tax Act, 2017(UTGST)/ respective state's State Goods and Services Tax Act (SGST) also, as notified by Central/State Govt.& as amended from time to time and applicable taxes before bidding. Tenderers will ensure that full benefit of Input Tax Credit (ITC) likely to be availed by them is duly considered while quoting rates.

  • The successful tenderer who is liable to be registered under CGST/IGST/UTGST/SGST Act shall submit GSTIN along with other details required under CGST/IGST/UTGST/SGST Act to railway immediately after the award of contract, without which no payment shall be released to the Contractor. The Contractor shall be responsible for deposition of applicable GST to the concerned authority.

    1. In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/ SGST Act, the railway shall deduct the applicable GST from his/their bills under reverse charge mechanism (RCM) and deposit the same to the concerned authority.
    2. When work is tendered for by a firm or company, the tender shall be signed by the individual legally authorized to enter into commitments on their behalf.
    3. The Railway will not be bound by any power of attorney granted by the tenderer or by changes in the composition of the firm made subsequent to the execution of the contract. It may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the Contractor.
  • As per clause 11 (vi) of Indian Railways Standard General Conditions of Contract, April, 2022;

    1. In case of any information submitted by tenderer is found to be false, forged or incorrect at any time during process for evaluation of tenders, it shall lead to forfeiture of the tender Bid Security besides banning of business for a period of upto five years.
    2. In case of any information submitted by tenderer is found to be false, forged or incorrect after the award of contract, the contract shall be terminated. Bid Security, Performance Guarantee and Security Deposit available with the railway shall be forfeited. In addition, other dues of the contractor, if any, under this contract shall be forfeited and agency shall be banned for doing business for a period of upto five years.
  • The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the Railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the Railway there under.

Custom

  • PRICE AND PAYMENT

    1. The unit prices quoted by the Tenderer and accepted by the Railways shall hold good till completion of the work and no additional individual claim will be admissible on account of fluctuation in market rates etc.
    2. All unit prices shall be in rupees .Unit measurement shall be in unit specified in scope. Contractor must carefully note.
  • VALIDITY OF OFFER The Tenderers shall keep the offer open for a minimum period of 63 days from the date of opening of the tender (i.e. from the closing of tender submission time) or for such extended period as may be mutually agreed upon and the Tenderer shall not be entitled during the aforesaid period or such extended period to withdraw his offer or revoke or cancel his tender or vary the tender or any terms thereof without the written consent of Sr. Divisional Electrical Engineer E. Rly. Sealdah.

Bidder declarations (18)

Undertakings

  • I/We have read the various conditions attached/referred to in this tender document and agree to abide by the said conditions.

  • I/We offer to do the work for Eastern Railway at the rates quoted in the attached schedule and hereby bind myself/ourselves to complete the work in all respect within the period of completion stipulated in the tender document from the date of issue of letter of acceptance of the tender.

  • Until a formal agreement is prepared and executed, acceptance of this tender shall constitute a binding contract between us subject to modifications, as may be mutually agreed to between us and indicated in the letter of acceptance of my/our offer for this work.

  • The amount as stipulated in tender document(if any) is herewith forwarded as Earnest Money/Bid Security shall stand forfeited without prejudice if :-to any other right or remedies in case my/our Tender is accepted and if :

    1. I/We do not submit the Performance Guarantee within the time specified in the Tender document;
    2. I/We do not execute the contract documents within seven days after receipt of notice issued by the Railway that such documents are ready; and
    3. I/We do not commence the work within fifteen days after receipt of orders to that effect.
  • I/we hereby confirm that I/we have satisfied myself/ourselves by actual inspection of the site and locality of the works, that all conditions liable to be encountered during the execution of the works are taken into account and that the rates he enters in the tender forms are adequate and all inclusive to accord with the provisions in Clause-37 of the Standard General Conditions of Contract 2022 for the completion of works to the entire satisfaction of the Engineer.

  • I /We hereby agree to abide the electrical safety measures in the working p l a c e

    1. Before servicing of electrical equipment make ensure the disconnecting of power source.
    2. Following PPE(personal protection equipment)must use if needed during working
      1. Insulated Gloves
      2. Insulated Matting
      3. Insulated ladder
      4. Rescue rods
      5. Voltage detectors with proper rating.
  • I/We also hereby agree to abide by the Indian Railways Standard General Conditions of Contract,April 2022 with all correction slips up-to-date and to carry out the work according to the Special Conditions of Contract and Specifications of materials and works as laid down by Railway in the annexed Special Conditions/ Specifications, Standard Schedule of Rates (SSOR) with all correction slips up-to-date for the present contract.

  • I/we understand that if the contents of the certificate submitted by us are found to be forged/false or incorrect at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security besides banning of business for a period of upto five year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.

Certifications

  • I/we the tenderer (s) am/are signing this document after carefully reading the contents.

  • I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.

  • I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.

  • I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.

  • I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.

  • I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.

  • I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.

  • I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.

  • I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.

  • I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)

Similar open tenders

Soonest first

Search similar in the explorerFind this tender in the explorer

Tender notice (PDF)