Signalling work in Connection with Provision of TTR (FSTWSWCMSC) -155 sets in Passenger running loop lines in Rewari-Madar Section of Jaipur Division.
Ministry of Railways
Office of the Sr.DSTE, DRM Building, N.W.R POWER HOUSE ROAD , BANIPARK Jaipur
Delivers to
Jaipur
Overview
22 facts from the tenderMinistry of Railways published this works tender on eProcure on 8 Oct 2026, for Jaipur. The estimated value is ₹3.4 Cr and the EMD is ₹6.9 L. It closes on 30 Oct 2026, 3:00 pm IST. Tender ID 92561522 · Ref SNT-JP-11R-2026-27.
Timeline
- Published8 Oct 2026 · 6:08 pm
- Bidding startsin 5d 16h16 Oct 2026
- Closes30 Oct 2026 · 3:00 pm
Bidding
- Bid type
- Open/Advertised
- Contract type
- Works - General · Expenditure
- Tender type
- Open
- Tendering section
- SIG WORKS
- Bidding system
- Single Packet System
- Bidding style
- Single Rate for Tender
- Validity of offer
- 60 days
- Completion period
- 12 Months
- Tender document cost
- None
- JV / consortium
- Not allowed
- Ranking order
- Lowest to Highest
- Expenditure type
- Combined (Revenue + Capital Works)
- Pre-bid meeting
- None
Buyer
- Inviting authority
- JAIPUR DIVISION-S AND T/NORTH WESTERN RLY
- Organisation type
- Central Govt. Ministry/Department
- Product category
- Railway related Products
- Location
- Jaipur
- Portal
- eProcure
- Inviting officer
- DRM/ S and TJAIPUR DIVISION-S AND T/NORTH WESTERN RLY
Important dates
- Published
- 8 Oct 2026, 6:08 pm IST
- Bidding starts
- 16 Oct 2026
- Closes
- 30 Oct 2026, 3:00 pm IST
Declarations by the buyer
- Complies with the Public Procurement (Make in India) Order 2017
- The tender inviting authority confirms this tender does not violate the GFR rules on procurement through GeM
- Bidders from a country sharing a land border with India must be registered with the competent authority
Schedule of work
39 items| Item | Quantity | Railways’ estimated rate | Amount |
|---|---|---|---|
| Schedule A · SOR SNT 2026 | |||
| 01Q-Series Magnetically Latched Neutral Line Relay (QL1 Type), 11F/4B,24V DC complete with plug board (base plate), connectors and retaining clips and conforming to BRS-935A and RDSO Specn.No.IRS:S-34 & S-23 or latest. The interlocking code for this unit shall be "ABDEG". Inspection: - RDSO Inspection charges: - Borne by Railways Payment Terms: - 100% after supply. | 25 Numbers | ₹6,861.70 | ₹1,71,542.50 |
| 02Contactor Unit (QBCA1 Type), 24 V DC, 2HF/4B complete with plug board (base plate), connectors, retaining clips etc and conforming to BRS- 943 and RDSO Specn.No.IRS:S-34 & S- 23 or latest. The interlocking code for this unit shall be "BCEJK". Inspection: - RDSO Inspection charges: - Borne by Railways Payment Terms: - 100% after supply. | 25 Numbers | ₹8,520.78 | ₹2,13,019.50 |
| 03Q-Series Neutral Line Relay (QN1 Type), 12F/4B, 24V DC complete with plug board (base plate), connectors and retaining clips etc and conforming to BRS- 930 and RDSO Specn.No.IRS:S-34 & S-23 or latest. The interlocking code for this unit shall be "ABCDE". Inspection: - RDSO Inspection charges: - Borne by Railways Payment Terms: - 100% after supply. | 25 Numbers | ₹4,746.07 | ₹1,18,651.75 |
| 04Q-Series Neutral Line Relay (QN1 Type), 8F/8B, 24V DC complete with plug board (base plate), connectors and retaining clips etc and conforming to BRS- 930 and RDSO Specn.No.IRS:S-34 & S-23 or latest. The interlocking code for this unit shall be "ABCDF". Inspection: - RDSO Inspection charges: - Borne by Railways Payment Terms: - 100% after supply. | 25 Numbers | ₹4,560.51 | ₹1,14,012.75 |
| 05Q-Series Twin Neutral Line Relay (QNN1 Type), 6F/2B, 24V DC complete with plug board (base plate), connectors and retaining clips etc and conforming to BRS-960 and RDSO Specn.No.IRS:S-34 & S-23 or latest. The interlocking code for this unit shall be "ACDEK". Inspection: - RDSO Inspection charges: - Borne by Railways Payment Terms: - 100% after supply. | 25 Numbers | ₹5,999.85 | ₹1,49,996.25 |
| 06Supply of ARA Terminal Block (M-6) made of PBT/Poly Carbonate as per RDSO Specn.No.IRS:S-75/2006 (Rev.2) or latest and RDSO Drg. No. SA-23741A (Alt. 4) or latest. Inspection: RDSO. Inspection Charges: Borne by Railways. Payment Terms: 100% on supply. | 1,500 Numbers | ₹105.20 | ₹1,57,800 |
| 07Termination of Outdoor Cables (Main Cables /tail cables) at both ends in location boxes, cable termination rack in relay room, station building, generator room etc. The item includes dressing of cables and wires with dressing threads as per standard practice. All material required for this item will be supplied by contractor. The outdoor cable shall be terminated in Relay Room, DG Room, ASM Room etc under supervision and instructions issued by Engr. incharge of the work. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after execution | 1,500 Per Conductor | ₹10.18 | ₹15,270 |
| 08Supply of Electric Point Machine, Non Trailable, Internal Locking, 220Mm Throw with IP 67 Motor, Minimum AC Immunity 400V AC With Tools and Complete Accessories Including Complete Ground Connection and all Insulation, Crank Handle and Along with Clamp Point Lock 60Kg, TWS As Per Drg.No. RDSO/S/11000 As Per RDSO Spn. IRS:S-24/2002 With Amd.01 Or Latest. IRS Type. Inspection: RDSO Inspection Charges: Borne by Railways Payment Terms: 100% after Supply. | 160 Numbers | ₹1,20,528.49 | ₹1,92,84,558.40 |
| 09Fixing of Electrical high thrust (220mm) point machine on the extended sleepers at thick web point as per standard railway practice as per RDSO Drg. No. S 3454 Alt 'A' or latest as per section of rails used. Item included fixing of switch extension bracket, fixing of switch extension bracket, fixing ground connection, adjusting opening of the switches and adjusting of the point machine with crank handle. The item also includes (i) Complete material for installation of point machine and fixing of ground connection/ switches extension bracket like point insulator materials, S pipe, wiring materials various fixing nuts & bolts including casting nuts, spring washers, etc. (ii) All smithy & fitting works required at site for complete installation. (iii) Installation of gauge tie plate & providing insulation for gauge tie plate. (iv) Wiring inside the point machine, insertion and termination of tail cable in point machine and junction boxes/ location box /cable hut as per extent practice on NWR and the instruction of Railway Engineer at site. (v) Supply and fixing of suitable size GI pipes with flange for taking cable into point machine. Note: Electrical Point Machine and M-6/ Screw less terminals will be supplied by Railways /covered in Schedule separately. Inspection: Consignee Inspection charges: Borne by Railways Payment terms: 90% after Installation & 10% after commissioning. | 155 Numbers | ₹19,712.57 | ₹30,55,448.35 |
| 10Supply of Track Lead Junction Box (TLJB) as per Drg.No.RST-11509 or latest made from FRP material including brass bolts and hylam board sheet with terminals etc. The technical specifications are as follows: (a) TLJB complete with cover to be in black/red having approximate weight of 4.0 Kg with L-262mm W-212mm and H 90 mm and all the holes required for mounting on FRP stump (vertical two for each FRP angle) HDPE pipe, cable etc. (b) Each TLJB shall have two Bakelite terminal block fitted horizontally: each Bakelite terminal block shall have two nickel chrome plate M10 brass terminal, 50mm long. Along with each TLJB, nickel chrome plated brass links (two nos.0f adequate strength for vertical linking of the terminals to be supplied. (c) HDPE pipe of size 32/35mm, 380 mm long alongwith two nuts for fixing on the TLJB hole. (d) The FRP stump for mounting the TLJB to be made of one-meter long 30mm X30mmX 4mm angle (2 nos.) and 300mm long 30mm X30mmX 4mm angle (1 no.) fixed at 50 mm from the bottom using galvanised nuts and bolts. The TLJB and the angles for stump should come alongwith holes on them for fixing using galvanised nuts and bolts of adequate strength to be supplied alongwith TLJB drawing no. 11509. Inspection: (i) RITES if value of item in work more than 5 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board. Inspection Charges: (i)Borne by Railways (ii) None Payment Terms: 100% on Supply | 50 Numbers | ₹2,140.30 | ₹1,07,015 |
| 11Erection, Fitting and Rail connection of Track Lead Junction Box on two supports (FRP stumps) with contractor's fixing material. This will include drilling of holes for track lead/side connections on rail. The work shall be done as per instructions of Rly engineer at site. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after execution. | 50 Numbers | ₹1,583.37 | ₹79,168.50 |
| 12Supply of Channel Pins MS (Galvanized) single groove, 7 mm suitable for 4mm Dia bonding wire as per spec No IRS S 17 & RDSO Drg No. S-69/M. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after Supply. | 1,500 Numbers | ₹6.85 | ₹10,275 |
| 13Supply of GI wire 8 SWG (4mm Dia) suitable for track circuit rail bonding. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after Supply. | 200 Kg | ₹79.44 | ₹15,888 |
| 14Supply of Apparatus Case Single (Large) NE Rly Type as per Drg. No. CSTE/6088 fitted with two nos of E Type lock (ward No will be specified by Engineer-in Charge) as per RDSO Drg. No. SA 3376 and Key to Drg. No. 3377 as per RDSO drawing No. RDSO/S-11500. Note: This item includes the supply of 2 Nos E Type Lock fitted on both doors, along with two Keys. Inspection: (i) RITES if value of item in work more than 10 lakhs or as per extant instructions by Railway Board. (ii) Consignee if value of whole item in work less than 10 lakhs or as per extant instructions by Railway Board. Inspection Charges:(i) Borne by Railways (ii) None Payment Terms: 100% after Supply. | 16 Numbers | ₹17,986.94 | ₹2,87,791.04 |
| 15Installation of Apparatus Cases Single (Large) with 'E' type lock on CC foundation. This includes filling of location foundations with river bed sand and plastering on top of the sand. Supply of 'E' Type lock has been covered in supply of Apparatus case separately. It covers fixing of lamp holder, switch and lamp etc. in Apparatus Case. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after installation. | 16 Numbers | ₹1,250.54 | ₹20,008.64 |
| 16Excavation and Casting of Apparatus Case foundation in ratio 1:3:6 with contractor's own materials including cement and galvanized anchor bolts of standard size. The required scaffolding Ferma etc for Casting of foundation will have to be brought by the contractor at his own cost. The item also includes additional masonry work as well as earthwork if required on bank where there will be possibilities of foundation sinked, fallen or tilted. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after installation. Single (Large) Case Apparatus case / SS location box as per Drg No. CSTE/5074 | 16 Numbers | ₹8,290.81 | ₹1,32,652.96 |
| 17Supply of Phenolic laminated Sheet, grade P3 in standard size of 1220 X 1220 x 12 mm as per spec. No IS 2036 of 1995 or latest. Test report of manufacture to be supplied. Inspection: (i) RITES if value of item in work more than 10 lakhs or as per extant instructions by Railway Board. (ii) Consignee Inspection Charges:(i) Borne by Railways (ii) None Payment Terms: 100% after Supply. | 10 Numbers | ₹5,843.15 | ₹58,431.50 |
| 18Fabrication and fixing of phenolic laminated sheet of size 10/12/20 mm thick in location box by providing all fixtures as per Railway Drawing including fixing of PVC coated string rods at the back side for cable support with contractor's own materials. The work shall be done as per instructions of Rly engineer at site. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after installation. Single Case (Large Case) | 16 Numbers | ₹2,821.59 | ₹45,145.44 |
| 19Fixing of ARA(M-6) Terminals /Screw less connectors / modular disconnect terminal blocks and fuse blocks on phenolic laminated sheets and fixing by stainless steel/brass nuts & bolts. This includes provision of two additional holes on the board on either side for cable conductor entry. (Supply of all above terminals have been covered separately in Chapter 4 of SOR) Inspection: Consignee Inspection Charges: None Payment Terms: 100% after installation. | 1,500 Numbers | ₹15.07 | ₹22,605 |
| 20Horizontal direction drilling/boring without damage of surface road /track using Auger Machine (HDD machine) or by Closed trench Method. The bore shall be upto 200 mm Dia & shall be done at the depth of minimum 1200 mm from the ground level. The ground level shall be considered ignoring the bank height of the bank of the road. The length of the bore shall be minimum 4 Mtrs long. This includes insertion of different Dia DWC-HDPE pipe/ GI pipes coupling etc. as per direction of Engineer In charge. Note: - Pipe Supply is not covered under this item. Contactor shall provide all material required for boring and adequate nos. of labours for proper laying of cables into the bore. Cable shall be laid cautiously so that it should not get damage due to rough handling & pressure on cable. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Execution | 1,000 Metre | ₹1,447.77 | ₹14,47,770 |
| 21Excavation of cable trench as per cable route plan, 1.2 Mtr. deep and of 0.3 Mtr. to 0.6 Mtr. wide at bottom as per RDSO sketch No. SDO/CABLE LAYING/003 or latest alongside the track in normal (all type) soil/strata, conforming to distances as per cable route plan and refilling. This work includes clearing of route from bushes etc, covering of cable laid in trench by loose soil for a layer of 50mm thickness approximately before covering by bricks. The work shall be done as per the extant practice on North Western Railway and instructions of Railway Engineer at site. In case 1.2m depth of trench is not achievable due to site conditions, specific approval of JA grade officer will be required for each site where trench depth of 1.2m is not possible. Without the approval of JA Grade officer, no payment for trenching will be made for trench depth less than 1.2m. (cum is Cubic Meter) Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Execution | 5,000 cum | ₹330.10 | ₹16,50,500 |
| 22Laying of S&T Cables of various cores/ pairs/ quads in trenches/ GI pipes/ RCC pipes/ DWC pipes/ Trunking. This also includes laying of cables in track crossings & road crossings. Item includes provision of labels of coloured plastic adhesive tapes or any other identifiable material on each cable to give the cable number at each Gantry Post/hectometer post. (Cables will be meggered before and after its laying by contractor under supervision of Railway Representative and he will submit the meggering report of each testing). Length of the cable laid includes the length of the cable coiled for termination purposes. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Execution | 16,000 Running Metre | ₹10.95 | ₹1,75,200 |
| 23Supplying and placing of one layer of standard size of 'B' grade quality bricks of the local make spreading on cables laid. (minimum size of brick 200mm X 100mm X 70mm) Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Installation. Length wise (up to 2 cables). | 15,000 Running Metre | ₹17.81 | ₹2,67,150 |
| 24Supply of Failure Analysis System (FAS) as per Technical Specifications. The specification of FAS should be got approved from the Engineer in charge before supply. Note: The Specification of FAS shall be as per technical specification given in contract Agreement or higher version as approved by Engineer In-Charge. (Technical specification shall be provided in tender documents.) Inspection: Consignee Inspection charges: Borne by Railways Payment terms:100% after supply | 2 Numbers | ₹1,97,325.10 | ₹3,94,650.20 |
| 25Installation, testing and commissioning of Failure Analysis System (FAS) as per Technical Specifications. The specification of FAS should be got approved from the Engineer in charge before supply. Note: The Specification of FAS shall be as per technical specification given in contract Agreement or higher version as approved by Engineer In-Charge. (Technical specification shall be provided in tender documents.) Inspection: Consignee, Inspection charges: None Payment terms:100% after commissioning | 2 Numbers | ₹49,331.27 | ₹98,662.54 |
| 26Supply and Installation of earth electrode including MS flat for signalling equipments on lever frame, apparatus cases, signal, relay racks, cable termination rack, block instrument etc. (supply & installation of earth electrode as per drawing no. RE/S&T/DRG/Tender/SK/398/94 for apparatus cases, signal post & other equipments as per instruction on earthing of S&T equipment. Laying of earth lead mild steel flat of size 35mmx6mm and fixing of lead MS flat to earth electrode and lever frame, signal post & apparatus cases as per Drg. No. CORE/S&T/ALD/SK/591/2008, 592/2008 and 593/2008 respectively and instructions on earthing at S&T equipment and providing cement enclosure for earth electrode as per drawing no. RE/S&T/Sig./Tender/SK/13/85 Alt. A) Note: This item requires for earthing of all the A/Cases & Signal as per RE standard. Inspection: Consignee Inspection charges: None Payment terms: 70% after supply, 20% after installation & 10% after commissioning | 160 Numbers | ₹8,199.86 | ₹13,11,977.60 |
| 27Supply of High-Density Polyethylene Pipes (HDPE) of 110 mm Outer Dia, 10 mm Wall Thickness, along with one coupler for every 6 Meters as per latest specification No. IS 4984: 2016 with latest amendments and Material Grade: PE 80. Inspection: (i) RDSO/RITES if value of item in work more than 10 lakhs or as per extant policy (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 10 lakhs or as per extant policy Inspection Charges: (i)Borne by Railways (ii) None Payment Terms: 100% after Supply | 1,000 Metre | ₹763 | ₹7,63,000 |
| 28Providing Services of helping hand man power to carry out miscellaneous/sundry works in the office/field between 08.00 hrs and 20.00 hrs of the day and accompanying Railway staff with all expenses of transportation, accommodation, food, consumables etc., with all ascents/descents, taxes, octroi, cess, fess, duties, with contractors tools and plants, materials, consumables, labour, crew, machineries with all lead and lift etc., complete as per special conditions, specification, regulation and as directed by Railway Engineer-in-charge. | 465 Man-Days | ₹674 | ₹3,13,410 |
| 29Point insulation Complete set as per RDSO/SPN/168/2005 for 1. Switch bracket 'D' bracket insulation for IRS point machine - One set comprises of (a) Side plate LH to Drg. No. S-3266 - 1 No. (b) Side plate RH to Drg. No. S-3265 - 1 No. (c) Insulating bush to Drg. No. S-3199 - 4 Nos. (d) Insulating washer to Drg. No. S-8640 - 4 Nos., 2. Split-Stretcher bar 2.1 Insulation for Leading stretcher bars (BG) each set comprising of (a) Insulating plate for leading insulated stretcher bars BG as per RDSO Drg. No. T-10384 - 2 Nos. (b) Insulating bushing for leading insulated stretcher bars for BG as per RDSO Drg. No. T-10535- 4 Nos. (c) Insulating Washer for insulated stretcher bar BG as per RDSO Drg. No. T-10371 - 6 Nos. 2.2 Insulation for following stretcher bars BG. Each set comprising of: (a) Insulating side plate for insulated stretcher bars BG as per RDSO Drg. No. T-10367 - 3 No. (b) Insulating bushing for insulated stretcher bars BG as per RDSO Drg. No. T-10368 - 6 Nos. (c)Insulating washer for insulated stretcher bars BG as per RDSO Drg. No. T10371 - 12 Nos 3. Gauge tie plates (52 Kg/60Kg as per site requirement) Insulation for (BG) complete with insulating bush and washereach set comprising of: (a) Insulating plate for insulated tie plate BG as per RDSO Drg. No. T- 10372-1 No. (b) Insulating bushing for insulated stretcher bar BG as per RDSO Drg. No. T10368 - 3 Nos. (c) Insulating Washer for insulated stretcher bar BG to IRS 40/84 as per RDSO Drg. No. T-10371 - 6 Nos. Inspection: (i) RDSO/RITES if value of item in work more than 10 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 10 lakhs as per extant instructions by Railway Board. Inspection Charges: (i)Borne by Railways (ii) None Payment Terms: 100% on Supply | 50 Set | ₹1,553.25 | ₹77,662.50 |
| 30Supply of complete set of ground connections for high thrust 220 mm stroke point machine along with insulation as per Drg. No RDSO/S3454 Alt.B dt 25-01-2023 or latest along with insulation. Inspection: (i) RDSO/RITES if value of item in work more than 10 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 10 lakhs as per extant instructions by Railway Board. Inspection Charges: (i)Borne by Railways (ii) None Payment Terms: 100% on Supply | 20 Set | ₹58,410 | ₹11,68,200 |
| 31Ground connections, complete set suitable for IRS type / approved point Machine for ordinary turnout with tongue attachment insulation and other insulation as per RDSO Drg. S/3361@ 47>47@ 63 (for IRS type point machine) or RDSO Drg No.SA-9151/52 (for Siemens point machine) with latest amendments. However, the ground connection shall be procured only after confirmation from Railway engineer as per site condition /type of machine/turnout.Inspection: (i) RDSO/RITES if value of item in work more than 10 lakhs(ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 10 lakhs as per extant instructions by Railway Board.Inspection Charges: (i)Borne by Railways (ii) NonePayment Terms: 100% on Supply | 20 Set | ₹8,219.59 | ₹1,64,391.80 |
| Schedule B · NS-A | |||
| 01Supply of 9/32'' drill bit make TATA/Jindal/JK. Inspection:Consignee. | 500 Numbers | ₹158.19 | ₹79,095 |
| 02Shifting/Re-locating/Lifting, fixing, wiring, testing & commissioning of existing MSDAC DP as per direction of site engineer of railway. This includes excavation of trenches for fixing of Tx/Rx cable, foundation if required and re-erection of same DP.Inspection:Consignee. | 25 Per Detection Point (DP) | ₹14,212.42 | ₹3,55,310.50 |
| 03Supply of Retro-reflective Tape of TYPE- IV,ASTM-D-4956-01 make,Color- Black/Red. Inspection:Consignee. | 100 Sqm | ₹1,105.18 | ₹1,10,518 |
| 04Horizontal Drilling by using manual pushing method at minimum depth of 1.5 meter below the formation level of earth as per decision of Engineer in charge .Pipe Supply is not covered under this item Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Execution | 1,000 Metre | ₹131.52 | ₹1,31,520 |
| 05Switch Plate lubricant - Cenolube 100or better NLGI 00 GRADE Blackcolored which should be non asphaltic Non bituminous blend of very heavy oils, inert thickeners and lubricating solids coupled with molybdenumdisulfide and graphite with no traces of chlorinated solvent such as 1,1,1trichloroethane which are flammableand harmful to the environment.Should have a blend of select highviscosity index solvent refinedseverely hydrofinished paraffin baseoils and synthetic base fluids. Itshould incorporate solid lubricants & organo molybdenum disulphide to fill& lubricate micronized asperities toprovide & form many films on thecontact surfaces to prevent metal-to-metal contact. It shall be designed tobe hand applied providing a toughadherent Lubricant film with Tackysemi-dry finish reducing contaminantadhesion. The grease Should Notform a difficult to remove thick DRYfilm which requires scrapping &solvent cleaning of Switch Platespecially before reapplication Thegrease should Not need Cleaning orscrapping before Reapplication.The Grease should be formulated fortropical climates and should notcontain pour point depressants and should Not be too thin. The grease shall be Resistant to water wash off &dilution, water insoluble, non- meltand chemically resistant to exposedenvironment. The grease shall beformulated with Extreme Pressureadditives, rust and corrosioninhibitors, anti-wear additives toprotect external surfaces against theharsh elements in severe climates,thus reducing rust binding andadhesive wear on switch plates FourBall Weld LOAD (ASTM- D2596) >600Kg, Copper corrosion 24 hrs @ 100c(ASTM D 4048) 1a -2e packing Size20 kg/25kg Drum.'(InspectionAgency- Consignee) | 180 Kg | ₹5,335.21 | ₹9,60,337.80 |
| 06Supply of Electric track drilling machine equipment consisting of Heavy duty electrictrack drilling machine works on 110V 50 HzAC with suitable interchangeable track mounting stand with depth adjusting facility. Make of heavy duty electric drilling machine is of Rallies or Wolf or Bosch or Superior. Inspection:Consignee. | 2 Numbers | ₹23,519.72 | ₹47,039.44 |
| 07Supply of Protection cover assembly set for Switch arrangenment. Extension bracket (RH and LH) of Point machinc as per Drg, No. NER001 date 15.05.2025 or latest to achieve anti-theft List of material lo be supplicd in onc set: - (a) Protection Cover LH- 1 No's. (b) Protection Cover RH- I No's. (c) 4 Pin round head Nut - 4 No's. (d) 2 Pin round head Bolt 4 No's. (e) Spacer 4 No's. (Inspection Agency-Consignce) | 160 Set | ₹5,626.83 | ₹9,00,292.80 |
| 08Supply of Spanner/ socket handle for closing and opening of Nut and Bolt. (Inspection Agency-Consignee) | 20 Numbers | ₹436.30 | ₹8,726 |
| Total | ₹3,44,84,694.76 | ||
The total matches the advertised value.
Documents
8 files- PDFNotice inviting tenderviewNitPdf_5574840.pdf (opens in a new tab)
- PDFTelecom Circular09TelecomCircularNo.09_1.pdfNo direct link in the notice; see the notice, page 13
- PDFMake in India PolicyMakeInIndiaPolicy2017.pdfNo direct link in the notice; see the notice, page 13
- PDFGCC and 10 Nos Correction SlipGCC202210NosCorrectionSlipsofGCC_compressed.pdfNo direct link in the notice; see the notice, page 13
- PDFTender DocumentTenderDocumentofTenderNoSNT-JP-11R-2026-27.pdfNo direct link in the notice; see the notice, page 13
- PDFGCC Corection Slip No 12ACSNo12ofIndianRailwayStandardGCCApril- 2022issuedon12-08-2026.pdfNo direct link in the notice; see the notice, page 13
- PDFGCCCorectionSlip 11GCCACS-11dated13.03.26_compressed.pdfNo direct link in the notice; see the notice, page 13
- PDFAnnexure-V(A)Annexure-V(A).pdf (opens in a new tab)
Documents to submit
Commercial-Compliance
- Document optional
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Technical-Compliances
- Document required
The tenderer shall submit the Firms's detail as per Annexure I. (Mandatory for all firms).
- Document optional
List of works on hand, existing commitments and balance amount of ongoing works as per format given in 'Annexure-II' duly verified by Chartered Accountant to evaluate bid capacity of the tenderer (Mandatory for tender value more than Rs. 20 crores)
- Document optional
Details of work of similar nature successfully completed during last seven years, ending last day of month previous to the one in which tender invited and detailed in Annexure III ( bifurcated as per components of tender schedule) to be submitted by tenderer along with Annexure-III in case of tender having composite nature of work , having distinct components and having separate schedule for each component having value more than two crore(Annexure-III(A) Mandatory in case of tender for composite nature of work.
- Document optional
List of similar nature of works physically completed in all respects during last 7 years, ending last day of month previous to one in which tender is invited shall be submitted as per Performa given in Annexure-III/III(B), for works
- directly awarded by Govt./Semi Govt./Public sector undertaking / Autonomous bodies /Municipal bodies/ Railways Siding owners /
- Public listed company having average annual turnover of Rs. 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of opening of tender Note- Works under item (iii) are to be submitted only for tenders costing Rs.50.00 Cr. and above.
- Document required
Attested copy of Completion Certificate of works mentioned in para (c) above from the Organizations with whom they worked as per proforma given in Annexure-IV(A) or IV(B)or IV(C)as applicable. (Mandatory)
Show all 48
- Document required
The tenderers shall submit a copy of certificate stating that all their statements/documents submitted alongwith bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-V
- Document optional
In addition to Annexure-V, in case of other than Company/Proprietary firm. Annexure -V(A) shall also be submitted by the each member of a Partnership Firm / Joint Venture (JV) / Hindu Undivided Family (HUH / Limited Liability Partnership (LLP) etc, as tlre case may be. Non submission of above certificate(s) by the bidder shall result in summarily rejection of their bid.
- Document optional
List of plants & Machinery available on hand (own) and proposed to be inducted (own and hired to be given separately) for the subject work in Annexure-VI.
- Document required
Tenderer must submit details of Annual Contractual Turnover Data for the Previous 3/4 Years (Contractual Payment only) etc. for fulfilling financial criteria as per GCC 2022 and latest amendments to it in Annexure VI(B).
- Document optional
List of Personnel, Organization available on hand and proposed to be engaged for the subject work in Annexure -VII.
- Document optional
Tenderer should submit list of deviations in offer (if any) from Tender conditions only in prescribed proforma vide Annexure VIII.
- Document optional
For Sole Proprietorship firm (a) Affidavit as per proforma given of Annexure IX (duly executed on stamp paper and notarized).
- Document optional
In case one or more members of JV is/are Proprietary Firm or HUF (Hindu Undivided Family) the following documents shall be Uploaded/Submitted (a) A copy of notarized affidavit on Stamp Paper declaring that he who is signing the affidavit on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF (Annexure-IX(A)).
- Document optional
For JV firm b) Memorandum of Understanding of JV as per pro forma given in Annex. X (duly executed on stamp paper and notarized).
- Document optional
For JV firm c) Power of Attorney/authorization duly Notarised by all JV constituents, in favour of the individual under whose digital signature key the tender document shall be uploaded on behalf of JV for signing the tender document on behalf of the JV (Standard Performa as per Annexure-X(A)
- Document optional
In case one or more of the members of the JV is/are partnership firm(s), following documents shall be submitted: (a) A notorized copy of Partnership Deed(notarized prior to date of tender opening as per the Indian Partnership Act.).
- Document optional
In case one or more of the members of the JV is/are partnership firm(s), following documents shall be submitted: (b) A copy of consent of all the Partners or individual authorized by partnership firm to enter into JV Agreement as per pro forma given in Annexure-XI(duly executed on stamp paper).
- Document optional
In case one or more members of JV is/are Proprietary Firm or HUF (Hindu Undivided Family) the following documents shall be Uploaded/Submitted: (b) A copy of Special Power of Attorney to be submitted by Sole Proprietor or HUF participating as member of JV firm as per proforma given in AnnexureXII (duly registered with the Registrar or notarized).
- Document optional
In case one or more members of the JV is/are companies, the following documents shall be submitted: d) A copy of Authorization/copy of Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender, , sign MOU/JV Agreement on behalf of the company and create liability against the company, as per proforma given in Annexure-XII(duly registered with the Registrar or notarized).
- Document optional
For Partnership firm (b) Special Power of attorney to be submitted by Partnership firm in favour of the individual to sign the tender on behalf of the firm and create liability against the firm as per proforma given in Annexure-XIII (duly registered with the Registrar or notarized).
- Document optional
For Partnership firm (a) A copy of Partnership Deed (notarized prior to date of tender opening as per the Indian Partnership Act.)
- Document optional
For Sole Proprietorship firm b) Special power of Attorney to be submitted by sole proprietor firm as per proforma given in Annexure XIV(duly registered with the Registrar or notarized). (Not required if tender documents are submitted by proprietor himself as per (a) above)
- Document optional
For Company registered under Companies Act 2013: (a)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company.
- Document optional
For Company registered under Companies Act 2013: (b) A copy of Certificate of Incorporation
- Document optional
For Company registered under Companies Act 2013: (c)A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company.as per proforma given in Annexure- XV&XV(A)(duly registered with the Registrar or notarized).
- Document optional
In case one or more members of the JV is/are companies, the following documents shall be submitted: a) A Copy of Memorandum & Articles of Association of Company.
- Document optional
In case one or more members of the JV is/are companies, the following documents shall be submitted: b) A Copy of resolution passed by Board of Directors of the company, permitting the company to enter into a JV agreement to be submitted as per Annexure-XVII.
- Document optional
In case one or more members of the JV is/are companies, the following documents shall be submitted: c) A copy of Certificate of Incorporation.
- Document optional
In case one or more of the members of the JV is/are partnership firm(s), following documents shall be submitted: (c) Special Power of attorney to be submitted by Partnership firm in favour of the individual to sign the MOU/JV agreement on behalf of the Partnership Firm and to create liability against the firm as per proforma given in Annexure-XVIII (duly registered with the Registrar or notarized).
- Document optional
Contractual payment received in last three years -in support of Bid Capacity(Mandatorily for tender value more than Rs.20 crore) Annexure- XIX if contractual payments received are based on Audited Balance Sheets duly certified by Chartered Accountant. OR Annexure- XIX(A), if contractual payments received from concerned Department / Client based on Form 26AS/16A from IT TRACES duly certified by Chartered Accountant.
- Document optional
For LLP (Limited Liability Partnership) Firm Registered under LLP Act 2008: d) Special Power of Attorney/ Authorization issued by LLP firm in favour of the individual to sign the tender on behalf of the LLP firm and create liabilities against the LPas per proforma given in Annexure-XX(duly registered with the Registrar or notarized).
- Document optional
For LLP (Limited Liability Partnership) Firm Registered under LLP Act 2008: (a)A copy of LLP Agreement.
- Document optional
For LLP (Limited Liability Partnership) Firm Registered under LLP Act 2008: (b)A copy of certificate of Incorporation
- Document optional
For LLP (Limited Liability Partnership) Firm Registered under LLP Act 2008: c) A copy of resolution passed by partner of LLP firm for submitting tender by LLP firm and to deal with tender on behalf of the firm as per proforma given in Annexure-XXI.
- Document optional
For Registered Society & Registered Trust (a) A copy of the certificate of registration.
- Document optional
For Registered Society & Registered Trust (b) A copy of Deed of Formation.
- Document optional
For Registered Society & Registered Trust (c) A copy of Special Power of Attorney in favour of the individual to sign the tender documents and create liabilities against the Registered Society/ Trust as per proforma given in Annexure-XXII (duly registered with the Registrar or notarized).
- Document optional
In case one or more members of JV is/are LLP firm, the following documents shall be submitted/uploaded: (a) A notarised copy of certificate of incorporation and LLP agreement.
- Document optional
In case one or more members of JV is/are LLP firm, the following documents shall be submitted/uploaded: (b) A notarised copy of resolution of the partners of LLP, permitting the LLP to enter into a JV agreement, authorising one of the partners of LLP to sign JV MOU/agreement and such other documents required to be signed on behalf of the LLP and to create liability against the LLP and/or to do any other act on behalf of LLP (Standard proforma as per Annexure-XXIV)
- Document optional
In case one or more members of JV is/are LLP firm, the following documents shall be submitted/uploaded: (c) A copy of authorisation/copy of power of attorney issued by the LLP (backed by resolution of partners) in favour of individual to sign the tender, sign MOU/JV agreement on behalf of the LLP and create liability against the LLP (Standard proforma as per Annexure XXV)
- Document optional
For Partnership firm (C)Document(s) in support of Registration of firm with Registrar of firms which includes Certificate of registration and Register of firm (Form No. may vary from State to State) (as applicable) etc. issued by Registrar of firms.
- Document optional
For partnership firm (d)If tender is submitted by Existing or newly formed Partnership Firm, relevant Annexure XXVI and XXVII as declaration to be submitted by the tenderer along with tender document.
- Document optional
For JV firm (a) All the Members of JV shall certify that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders/contract on the date of opening of bids either in their individual capacity or as a member of the JV in which they were/are members.
- Document optional
For HUF (a) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' oHindu Undivided Family (HUF) and he has the authority, power and consengiven by other members to act on behalf of HUF. (Standard proforma as pe Annexure XXVIII).
- Document optional
A Power of Attorney executed and issued overseas, the document will also have to be legalised by Indian Embassy and notarized in the Jurisdiction where power of attorney is being issued. However, the POA provided by the bidders of the country who have signed the Hague legislation convention 1961 are not required to be legalised by the Indian Embassy if it carries a conforming Appostille certificate. (As per correction slip in GCC 2022.
- Document optional
The tenderer shall submit the self attested copy of the PERMANENT ACCOUNT NO. issued by the Income Tax Department.
- Document required
Mandatory undertaking Regarding Employment/ Partnership of Retired Railway Employees as per Annexure XXIII
Eligibility
Special Financial Criteria
- Document required
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less, where: V= Advertised value of the tender in crores of Rupees N=Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of 'total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet As per Clause No. 10.2 of Tender Form (second Sheet) of Annex. I of Part-I of GCC- 2022,with up to date correction slip.
Special Technical Criteria
- Document required
The tenderer must have successfully completed or substantially completed any of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:
- Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or
- Two similar works each costing not less than the amount equal to 40% of the advertised value of the tender, or
- One similar work each costing not less than the amount equal to 60% of the advertised value of the tender Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange,incorporated/registered at least 5 years prior to the date of closing of tender,shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. As per Clause No. 10.1 of Tender Form second Sheet of Annex. I of Part-I of GCC 2022, with up-to-date correction slip.
- Document required
Definition of similar work "Any Signalling Work "
Partnership firm/Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.
Please submit a certificate in the prescribed format (please download the format from the link given below). Non submission of the certificate, or submission of certificate either not properly filled in, or in a format other than the prescribed format shall lead to summary rejection of your offer. ( Click here to download the Format of Self Certification)
Check each criterion against the tender notice before you bid.
Commercial conditions
- EMD
- ₹689,700
- Tender fee
- None
Terms & conditions
4 conditionsGeneral Instructions
Tenderer should note that tender will be dealt as per GCC 2022 and latest amendments to it.
Rates in the schedule items of work are inclusive of all taxes as per clause 37 of GCC-2022
Wherever there is any ambiguity in SOR Item Description, that particular item description in latest RDSO Specification to be considered as FINAL.
Telecom Circular No. 09/2023 (copy attached) shall be religiously followed for undertaking digging work in the vicinity of Signalling, Electrical and Telecommunication Cables. Zonal Railways issued local instructions/JPO for protection of cables while undertaking works in the vicinity of Railway Tracks in line with Telecom Circular 09/2023.
Bidder declarations (20)
Undertakings
I/We have visited the works site and I/We am/are aware of the site conditions.
I/We have read the various conditions to tender attached here to and agree to abide by the said conditions. I/We also agree to keep this tender open for acceptance for a period as mentioned in NIT header from the date fixed for opening the same and in default thereof, I/We will be liable for forfeiture of my/our "Earnest Money". I/We offer to do the work for North Western Railway, at the rates quoted in the attached schedule and hereby bind myself/ourselves to complete the work in all respects within time period as mentioned in the NIT Header from the date of issue of letter of acceptance of the tender.
Until a formal agreement is prepared and executed, acceptance of this tender shall constitute a binding contract between us subject to modifications, as may be mutually agreed to between us and indicated in the letter of acceptance of my/our offer for this work.
The tenderer shall comply with the provisions of the Contract Labour (Regulation and Abolition) Act 1970 and the Contract Labour (Regulation and Abolition) Central Rules 1971 as modifed from time to time, wherever applicable and shall also indemnify the Railway from and against any claims under the aforesaid Act and Rules.
The successful tenderer after award of the contract shall register himself on website www.shramikkalyan.indianrailways.gov.in and will comply the provisions of the Para 39 of the Special Conditions (General) of Standard Tender Document.
Certify that neither I /We (name of the sole Proprietor firm/ Partnership Firm/Limited Company/ LLP/Registered Society/Trust / JV firm) nor any of the partner or partnership firm/ LLP /Member of Registered Society/ Trust / Constituent of JV firm including partner of partnership firm in JV has/ have been black listed or debarred by Railway or any other Ministry /Department/ Public Sector Undertaking of the Government of India/ any State from participation in tenders/contract on the date of opening of bids either in our individual capacity or in any firm in which we are partners.
An undertaking that he is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which he was / is a partner/member.
For LLP (Limited Liability Partnership) Firm Registered under LLP Act 2008: An undertaking that the LLP is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of JV in which the LLP was / is a member.
For HUF An undertaking that the HUF is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which HUF was / is a partner/member. Concealment / wrong information in regard to above shall
The tenderer shall submit the original copies of the documents as per Annexure II, IX, IX(A), X, X(A), XI, XII, XIII, XIV, XV, XV(A), XVII, XVIII, XX, XXI, XXII, XXIII,XXIV, XXV, XXVI and XXVII, XXVIII as applicable for Sole Proprietor/Partnership firm/LLP/Registered Society & Trust /Limited Company/JV Firms as and when required by the Railway for the verification. If the required documents are not submitted by the tenderer or any discrepancy between the scanned uploaded documents and original documents then the offer of the tenderer will be summary rejected and the action will be taken as per the various provisions of Affidavit to be submitted by the tenderer as per Annexure-II.
Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.
Certifications
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
Similar open tenders
Soonest first- 6 daysleftA.OHE work in connection with Sitamarhi(SMI)-Raxaul(RXL) Section- ADX Yd.-TRR(P) in passe…Ministry of Railways · Closes 16 Oct 2026
- 6 daysleft1) Bortalao-Kachewani-TTR (FS/TWS/ECMS) - 10 Sets & TTR (DS)-01 Sets. 2) Durg-Nagpur-Thro…Ministry of Railways · Closes 16 Oct 2026
- 6 daysleft1. S&T work in connection with provision of Track Renewal Jabalpur division of West Centr…Ministry of Railways · Closes 16 Oct 2026
- 13 daysleftSignaling work in connection with TTR, Installation of TWS 70 Sets in the section of SSE/…Ministry of Railways · Closes 23 Oct 2026
- 16 daysleftExecution of Signaling & Telecommunication work in connection with: (1) Raipur Division…Ministry of Railways · Closes 26 Oct 2026
- 19 daysleftRail bonding work in connection with track renewal in BLY-BDC-SKG-TTR 30 Sets(60 kg 1 in…Ministry of Railways · Closes 29 Oct 2026
- 20 daysleftSignalling work in c/w (i) Ambala Division -TTR(TWSCMSC) -40 sets, TTR(FSTWSWCMSC)-13 set…Ministry of Railways · Closes 30 Oct 2026
- 23 daysleftSignalling work in Connection with Provision of TWS-290 sets in Passenger running loop li…Ministry of Railways · Closes 2 Nov 2026
Search similar in the explorerFind this tender in the explorer