General Power Supply work for Electrification of Service Buildings, Goods Shed, Circulating Area in c/w Roza - Upgradation/ Modernization of infrastructure at Roza line no. 05 & 06 proposed for goods…
Ministry of Railways
Office of the Dy. Chief Electrical Engineer, Const., Moradabad Near DRM office Moradabad
Delivers to
Moradabad, Uttar Pradesh
Overview
23 facts from the tenderMinistry of Railways published this works tender on eProcure on 13 Oct 2026, for Moradabad, Uttar Pradesh. The estimated value is ₹2.1 Cr and the EMD is ₹4.2 L. It closes on 3 Nov 2026, 3:00 pm IST. Tender ID 92728386 · Ref 17-ELECT-C-T-GPS-MB-65-A.
Timeline
- Published13 Oct 2026 · 2:54 pm
- Bidding startsin 4d 5h20 Oct 2026
- Closes3 Nov 2026 · 3:00 pm
Bidding
- Bid type
- Open/Advertised
- Contract type
- Works - General · Expenditure
- Tender type
- Open
- Tendering section
- WORKS
- Bidding system
- Single Packet System
- Bidding style
- Single Rate for Each Schedule Item
- Validity of offer
- 60 days
- Completion period
- 12 Months
- Tender document cost
- None
- JV / consortium
- Not allowed
- Ranking order
- Lowest to Highest
- Expenditure type
- Capital (Works)
- Pre-bid meeting
- None
Buyer
- Inviting authority
- DYCEE-C-UMB-ELECTRICAL/NORTHERN RLY
- Organisation type
- Central Govt. Ministry/Department
- Product category
- Railway related Products
- Location
- Moradabad, Uttar Pradesh · the inviting office's place
- Portal location
- New Delhi · as listed on eProcure
- Portal
- eProcure
- Inviting officer
- DY.CEE/C/MBDYCEE-C-UMB-ELECTRICAL/NORTHERN RLY
Important dates
- Published
- 13 Oct 2026, 2:54 pm IST
- Bidding starts
- 20 Oct 2026
- Closes
- 3 Nov 2026, 3:00 pm IST
Declarations by the buyer
- Complies with the Public Procurement (Make in India) Order 2017
- The tender inviting authority confirms this tender does not violate the GFR rules on procurement through GeM
- Bidders from a country sharing a land border with India must be registered with the competent authority
Schedule of work
68 items| Item | Quantity | Railways’ estimated rate | Amount |
|---|---|---|---|
| Schedule A · SOR Items | |||
| 1Supply and recessing/fixing of M.S./PVC conduit pipe with accessories, junction box, etc including making chase, plastering/clamping etc as per technical specifications. PVC Conduit pipe conforming to IS 9537/Part III/1983 (Latest version) 25 mm (Medium)Bids quote a percentage above, below or at par with these ratesEscalation 166.23% | 7,200 Metre | ₹31 | ₹5,94,225.36 |
| 2Supply of Batten/Angle Holder/Ceiling rose & installation on the Junction Box of laid conduit including connections, Testing & commissioning as per Tech. Specification a) Bakelite batten/Angle HolderBids quote a percentage above, below or at par with these ratesEscalation 166.23% | 50 Numbers | ₹10 | ₹1,331.15 |
| 3Supply of Batten/Angle Holder/Ceiling rose & installation on the Junction Box of laid conduit including connections, Testing & commissioning as per Tech. Specification b) Bakelite ceiling rose 3 plateBids quote a percentage above, below or at par with these ratesEscalation 166.23% | 270 Numbers | ₹11 | ₹7,907.03 |
| 4Fabrication of weather proof distribution board as per drawing approved by Railway with 2mm thick CRCA sheet, duly painted, suitable for operation on single phase 230 Volts AC supply system complete with 6 No./4 No.-32 Amps. Porcelain Kit-kat Fuse, Neutral link, earthing, inter connections, supply, recessing, testing & commissioning as per tech. Specification Approx. size 400x250x135mm. b) Comprising with 4 nos. 32 Amps. Porcelain kit-kat fuse & neutral link.Bids quote a percentage above, below or at par with these ratesEscalation 166.23% | 10 Numbers | ₹375 | ₹9,983.63 |
| 5Earthing with 40 mm dia GI pipe class 'B', 3 meter long earth electrode as per IS:3043 (Latest Version) to achieve earth resistances less than 5 ohms including construction of masonry enclosures with hinged cover plate of cast iron with locking arrangement (approx. size 400mmx400mm) on top, provision of earth plate, connections from earth electrode to switch gear/pole as per drawingBids quote a percentage above, below or at par with these ratesEscalation 166.23% | 105 Job | ₹883 | ₹2,46,835.14 |
| 6Laying, underground/road/Railway track, recessing in platform /wall along with Rly. Track/in laid RCC/GI pipe as required 1.1 KV grade LT XLPE insulated armoured, aluminium conductor cable including making chase & plastering after laying of cable/digging of cable trench, sand cushioning, protective covering with second class bricks, provision of cable route marker as per Tech. Specfn. including end terminations with Alu. Crimping socket/lugs, testing and commissioning of following sizes :- Note: Cable will be supplied from the store of SSE/E/C/MB and SSE/E/C/UMB a) Up to 25 Sq. mm.Bids quote a percentage above, below or at par with these ratesEscalation 166.23% | 3,500 Metre | ₹30 | ₹2,79,541.50 |
| 7Laying, underground/road/Railway track, recessing in platform /wall along with Rly. Track/in laid RCC/GI pipe as required 1.1 KV grade LT XLPE insulated armoured, aluminium conductor cable including making chase & plastering after laying of cable/digging of cable trench, sand cushioning, protective covering with second class bricks, provision of cable route marker as per Tech. Specfn. including end terminations with Alu. Crimping socket/lugs, testing and commissioning of following sizes :- Note: Cable will be supplied from the store of SSE/E/C/MB and SSE/E/C/UMB b) Above 25 sq mm to 120 sq mmBids quote a percentage above, below or at par with these ratesEscalation 166.23% | 10,500 Metre | ₹31 | ₹8,66,578.65 |
| 8Laying, underground/road/Railway track, recessing in platform /wall along with Rly. Track/in laid RCC/GI pipe as required 1.1 KV grade LT XLPE insulated armoured, aluminium conductor cable including making chase & plastering after laying of cable/digging of cable trench, sand cushioning, protective covering with second class bricks, provision of cable route marker as per Tech. Specfn. including end terminations with Alu. Crimping socket/lugs, testing and commissioning of following sizes :- Note: Cable will be supplied from the store of SSE/E/C/MB and SSE/E/C/UMB a) Above 120 Sq. mm.Bids quote a percentage above, below or at par with these ratesEscalation 166.23% | 4,000 Metre | ₹31 | ₹3,30,125.20 |
| 9Supply and laying of G.I pipes class B , ISI marked under road/clamping with erecting pole or wall as per technical specifications and drawing for passing cable of following sizes:- (a) 50 mm diaBids quote a percentage above, below or at par with these ratesEscalation 166.23% | 120 Metre | ₹126 | ₹40,253.98 |
| 10Supply and laying of G.I pipes class B , ISI marked under road/clamping with erecting pole or wall as per technical specifications and drawing for passing cable of following sizes:- (c) 100 mm diaBids quote a percentage above, below or at par with these ratesEscalation 166.23% | 120 Metre | ₹291 | ₹92,967.52 |
| 11Earthing with 600x600x3mm thick copper plate earth electrode as per IS 3043 (Latest version), to achieve earth resistance less than one ohm, including construction of masonry enclosure with hinged cover plate of cast iron with locking arrangement (Approx. size 600x600mm) on top, watering pipe, connections from earth plate to top with 40x6mm copper strip in 50mm dia GI pipe class 'B' provision of earth plate as per drawing and technical specification.Bids quote a percentage above, below or at par with these ratesEscalation 166.23% | 2 Job | ₹3,606 | ₹19,200.51 |
| 12Connections with 40x6 mm copper strip in 50mm dia G.I. pipe class-B, 300 mm deep in ground/recessing in floor from earth electrode strip to neutral of transformer/alternator as per drawing and technical specification.including supply of material.Bids quote a percentage above, below or at par with these ratesEscalation 166.23% | 30 Metre | ₹371 | ₹29,631.40 |
| 13Earthing with 600x600x6mm thick GI plate earth electrode as per IS 3043 (Latest Version) to achieve earth resistance less than one ohm including construction of masonry enclosure with hinged cover plate of cast iron with locking arrangement (Approx. size 600x600mm) on top, watering pipe, connections from earth plate to top with 40x10mm GI strip in 50mm dia GI pipe class 'B', provision of earth plate as per drawingand technical specification.Bids quote a percentage above, below or at par with these ratesEscalation 166.23% | 2 Job | ₹1,974 | ₹10,510.76 |
| 14Connection with GI strip 300mm deep in ground/recessing in floor/clamping in Trenches of sub station by grouting clamps manufacture with MS sheet 14 SWG, from earth electrode strip to HT panel/LT panel/AMF panel/Transformer/DG set etc. as per approved drawing and technical specification.including supply of material, of size: (ii) 40x10 mmBids quote a percentage above, below or at par with these ratesEscalation 166.23% | 30 Metre | ₹117 | ₹9,344.67 |
| 15Supply and recessing/ fixing on surface 6 SWG, GI wire for loop earthing as required as per technical specification.Bids quote a percentage above, below or at par with these ratesEscalation 166.23% | 2,300 Metre | ₹5 | ₹30,616.45 |
| Schedule B · Non-SOR Items | |||
| 1One Job consists of dismantling of one Rail pole / Tubular pole by digging / cutting from the ground level (min 450 MM) including removing of over head conductor, bracket, insulators, earth wire, guard wire etc. and transport the same from site to the store of SSE(E)/C/MB. Note:- (dismantling will be done in the presence of site supervisor with proper safety arrangement.) | 15 Numbers | ₹1,345 | ₹20,175 |
| 2Supply and erection of 5 m high hot dip galvanized octagonal pole with top 70 mm around face bottom 130 mm around face made of 3 mm thick base plate size 200x 200x12 mm complete with appropriate sleeve at the top of the pole for mounting single arm bracket 300 mm long suitable for 45-50 watt LED street light fitting including casting, muffing with cement concrete foundation(1:2:4) painting, earthing and foundation GI Nut bolt of suitable length with washer and smart pack, junction box with single pole MCB & terminal and as per explanatory note. a) Single Arm | 10 Numbers | ₹10,823 | ₹1,08,230 |
| 3Supply and erection of 5 m high hot dip galvanized octagonal pole with top 70 mm around face bottom 130 mm around face made of 3 mm thick base plate size 200x 200x12 mm complete with appropriate sleeve at the top of the pole for mounting single arm bracket 300 mm long suitable for 45-50 watt LED street light fitting including casting, muffing with cement concrete foundation(1:2:4) painting, earthing and foundation GI Nut bolt of suitable length with washer and smart pack, junction box with single pole MCB & terminal and as per explanatory note. b) Double Arm | 50 Numbers | ₹12,217 | ₹6,10,850 |
| 4Supply & fixing of complete 18-20 Watt LED tube light fitting 1200 mm integrated with aluminium Extrusion base with LED & driver, decorative pin type caps & copper contacts with diffuser made of transparent polycarbonate with tube light, operating voltage single phase 230 Volt AC, 50Hz conforming to CEE/NR specification no. PCEE/NR/121-Elect/PS/2019 (REV.-'4'), dt:04.11.2019 (Attached) or latest | 230 Numbers | ₹693 | ₹1,59,390 |
| 5Supply, fixing, testing & commissioning of complete 40-45 Watt LED street light fitting luminaires operating voltage single phase 230 Volt AC, 50 Hz with suitable pressure die cast aluminium housing and LED driver conforming to CEE/NR specification no. PCEE/NR/121- Elect/PS/2019 (REV.-'4'), dt:04.11.2019 (Attached) or latest | 125 Numbers | ₹4,128 | ₹5,16,000 |
| 6Supply, erection, fixing, testing & commissioning of industrial type fresh air Fan size 380 mm 220V olt.AC.50 Hz ISI marked approved make complete in all respect as per tech. specification/site requirement. | 30 Numbers | ₹3,679 | ₹1,10,370 |
| 7Supply, fixing, testing & commissioning of 7 Watt LED lamp as required as per specification no. PCEE/NR/121-Elect/PS/2019 (REV.-'4'), dt:04.11.2019 (Attached) or latest. | 50 Numbers | ₹163 | ₹8,150 |
| 8Supply, making, testing and commissioning of LT straight through joint (Jointing kit) up to the size of 400 sq. mm. 2/3.5/4 core LT XLPE cable as required as per site and as per direction of site engineer | 8 Numbers | ₹5,437 | ₹43,496 |
| 9Design, fabrication, supply, testing, commissioning of Feeder pillar(size- 0.4mx0.4mx0.5m) made of angle iron size-40x40x6 mm covered from all sides with MS sheet 20 SWG Including door with hinge, locking arrangement, nut & bolts, Aluminium bus bar (size- 35x05x400 mm),Bakelite gutka, cable glands, Earthing points, cement, sand, interconnections etc. and painting with two coats of enamel gray paint over a coat of red oxide primer for antirust complete in all respect & as per site requirement. | 28 Numbers | ₹5,223 | ₹1,46,244 |
| 10Design, manufacture supply, erection, testing & commissioning of double door Wall Mounted LT Switch Board suitable for 3 phase 4 wire 415 Volt AC supply system comprising with: (i) Incoming MCCB 4 Pole 250 A 35 KA B/C-1No., (ii) Outgoing MCCB 125 Amps 35 KA B/C-2 Nos. (iii) Outgoing MCCB 63 Amps 35 KA B/C-6 Nos. The Panel shall be complete with 250 Amps. Copper bus bars for Phases and 125 Amp. for Neutral, 3 phase 4 wire 415 Volt as per drawing approved by Railways and explanatory note, voltmeter on incoming panel, digital amperes meter with selector switch and electronic energy meter on each O/G panels and as per explanatory note. | 1 Numbers | ₹2,23,334 | ₹2,23,334 |
| 11Design, Manufacture, supply, erection, testing & commissioning of LT switch board suitable for 3 Phase, 4 wire 415 Volts, AC supply system comprising with: (I) Incoming 400 Amp 4 P 35 KA B/C MCCB = 1 NO (ii) Outgoing 250 Amp 4 P 35 KA B/C MCCB = 3 NOS (iii) Outgoing 125 Amp 4 P 35 KA B/C MCCB = 3 NOS (ii) Outgoing 63 Amp 4 P 35 KA B/C MCCB = 3 NOS The panel shall be complete with 400 Amp Copper Bus Bars for Phases and 200 Amp for Neutral 3 phase 4 wire 415 volt, voltmeter on incoming panel, digital amperes meter with selector switch and electronic energy meter on each O/G panels and as per explanatory Note. | 1 Numbers | ₹2,89,373 | ₹2,89,373 |
| 12Supply, fixing, testing and commissioning of TPN distribution board 4 way complete with TPN MCCB 63/100 Amps. (FP) adjustable type 01 no. (35 KA) and MCB SP 6-32 Amps. 12 Nos. (10 KA) complete in all respect as per site requirement/IE rule & technical specification. | 10 Numbers | ₹10,663 | ₹1,06,630 |
| 13Design & manufacture, supply, installation, fixing, testing & commissioning of 8 way MCB distribution board, dust & vermin proof, 3 phase, 4 wire 415 Volt, AC supply system. The switch board shall be complete with inter connections, instrument connections with copper conductor cable as per IS 13032, phosphatised & painted with epoxy polyster based powder paints. Three phase double door sheet steel enclosure detachable gland plates, flush/surface mounting for MCB's fitted with busbars, earth bars & neutral links etc. of suitable capacity, comprising of following i.e double door 8 way distribution board 1 no.1x40 A.MCB DP 10 KA,240/415V., 50 Hz & 6x6-32 A. MCB SP 10 KA, 240/415 V, 50 Hz complete in all respect as per site requirement/IE rule & tech. specification | 21 Numbers | ₹3,507 | ₹73,647 |
| 14Supply and drawing of the following Sizes FRLS PVC insulated multi-stranded copper conductor single core flexible cable conforming to IS 694 (latest version) in laid (recessed/Surface) MS/PVC/HDG Conduit pipe for wiring of point wiring/circuit wining/Sub main/Main as required & as per explanatory note including drawing, connection testing and commissioning a) 1.5 sq. mm. | 12,000 Metre | ₹18 | ₹2,16,000 |
| 15Supply and drawing of the following Sizes FRLS PVC insulated multi-stranded copper conductor single core flexible cable conforming to IS 694 (latest version) in laid (recessed/Surface) MS/PVC/HDG Conduit pipe for wiring of point wiring/circuit wining/Sub main/Main as required & as per explanatory note including drawing, connection testing and commissioning b) 2.5 Sq. mm | 7,500 Metre | ₹32 | ₹2,40,000 |
| 16Supply and drawing of the following Sizes FRLS PVC insulated multi-stranded copper conductor single core flexible cable conforming to IS 694 (latest version) in laid (recessed/Surface) MS/PVC/HDG Conduit pipe for wiring of point wiring/circuit wining/Sub main/Main as required & as per explanatory note including drawing, connection testing and commissioning c) 4 Sq. mm | 3,500 Metre | ₹45 | ₹1,57,500 |
| 17Supply and drawing of the following Sizes FRLS PVC insulated multi-stranded copper conductor single core flexible cable conforming to IS 694 (latest version) in laid (recessed/Surface) MS/PVC/HDG Conduit pipe for wiring of point wiring/circuit wining/Sub main/Main as required & as per explanatory note including drawing, connection testing and commissioning d) 6 Sq. mm | 1,800 Metre | ₹65 | ₹1,17,000 |
| 18Supply and drawing of the following Sizes FRLS PVC insulated multi-stranded copper conductor single core flexible cable conforming to IS 694 (latest version) in laid (recessed/Surface) MS/PVC/HDG Conduit pipe for wiring of point wiring/circuit wining/Sub main/Main as required & as per explanatory note including drawing, connection testing and commissioning e) 10 Sq. mm | 1,100 Metre | ₹86 | ₹94,600 |
| 19Supply & fixing of bracket on pillar or as required made out of one meter length 40 mm dia GI pipe class "B" ISI mark of approved make & shape and bracket shall be fixed with double clamps made out of GI strip of size 40x5 mm with help of suitable size GI nut, bolts & washers and as per explanatory note. | 15 Numbers | ₹641 | ₹9,615 |
| 20Supply and providing maintenance free earthing with primary MS pipe 40 mm dia 3000 mm long and Secondary MS pipe 80 mm dia 3000 mm long class B ISI mark conforming to IS 1239 including digging pit of size 5ftx5ftx10ft and using enhancement chemical compound minimum 75 kg suitable for 40 kA current capacity as per RDSO specification no. RDSO/PE/SPEC/PS/0/09 (Rev 0-2008) | 4 Numbers | ₹19,365 | ₹77,460 |
| 21Supply and recessing/fixing of 40 mm dia Medium Rigid PVC conduit pipe conforming to IS 9537 Part-III/1983 (Latest Version) with accessories, junction box, bend etc including making chase, plastering/clamping as approved by Railway and as per explanatory note | 450 Metre | ₹84 | ₹37,800 |
| 22Supply and laying of GI Strip of size 25x5 mm (galvanized) conforming to relevant IS below 300 mm deep in ground/recessing in floor as required and as per explanatory note including connection with earth electrode to equipment. | 520 Metre | ₹95 | ₹49,400 |
| 23Installation, testing and commissioning of 2.0 Split AC as per explanatory note. Note: AC shall be supplied from the store of SSE/E/C/UMB and SSE/E/C/MB. | 8 Numbers | ₹2,061 | ₹16,488 |
| 24Supply, installation and commissioning of light, wall mounted voltage stabilizer conforming to IS: 8448 suitable with torroidal case transformer having capacity 5 kVA , input voltage 130-300 V and output voltage 220-240 V, MCB 32 A, time delay relay (2-4 mins) with soft touch type instant and start switch, under voltage and over voltage cut off with indicators, Digital voltmeter and ammeter with soft type selector switch for measuring input and output voltage, indicator for power ON and timer ON, IS:8448 Latest version with RDSO/ISO/BIS equivalent certification. | 11 Numbers | ₹7,129 | ₹78,419 |
| 25Supply of modular snap type switches/bell push/flush type socket outlet and installation on the recessed modular box, connection, testing and commissioning as per Tech. Specification. a) Snap switches 6 A single pole | 550 Numbers | ₹128 | ₹70,400 |
| 26Supply of modular snap type switches/bell push/flush type socket outlet and installation on the recessed modular box, connection, testing and commissioning as per Tech. Specification. b) Snap switches 16 A single pole | 80 Numbers | ₹167 | ₹13,360 |
| 27Supply of modular snap type switches/bell push/flush type socket outlet and installation on the recessed modular box, connection, testing and commissioning as per Tech. Specification. c) 10 A Sockets with safety shutter | 90 Numbers | ₹159 | ₹14,310 |
| 28Supply of modular snap type switches/bell push/flush type socket outlet and installation on the recessed modular box, connection, testing and commissioning as per Tech. Specification. d) Power sockets with safety shutter 16 A | 80 Numbers | ₹271 | ₹21,680 |
| 29Supply of modular snap type switches/bell push/flush type socket outlet and installation on the recessed modular box, connection, testing and commissioning as per Tech. Specification. e) Bell push with neon | 5 Numbers | ₹149 | ₹745 |
| 30Supply of modular snap type switches/bell push/flush type socket outlet and installation on the recessed modular box, connection, testing and commissioning as per Tech. Specification. f) Fan step regulator 230 V | 140 Numbers | ₹366 | ₹51,240 |
| 31Supply of modular snap type switches/bell push/flush type socket outlet and installation on the recessed modular box, connection, testing and commissioning as per Tech. Specification. g) Blank plate single | 20 Numbers | ₹53 | ₹1,060 |
| 32Supply and fixing of the following sizes of modular metal boxes concealed boards with white finish single mounting plate and fixing of switches/plug, sockets, fan regulators and connection to wiring, metal boxes boards are to be concealed in the walls of following sizes a) 4 module | 100 Numbers | ₹186 | ₹18,600 |
| 33Supply and fixing of the following sizes of modular metal boxes concealed boards with white finish single mounting plate and fixing of switches/plug, sockets, fan regulators and connection to wiring, metal boxes boards are to be concealed in the walls of following sizes b) 6 module | 60 Numbers | ₹280 | ₹16,800 |
| 34Supply and fixing of the following sizes of modular metal boxes concealed boards with white finish single mounting plate and fixing of switches/plug, sockets, fan regulators and connection to wiring, metal boxes boards are to be concealed in the walls of following sizes c) 8 Module | 60 Numbers | ₹369 | ₹22,140 |
| 35Supply and fixing of the following sizes of modular metal boxes concealed boards with white finish single mounting plate and fixing of switches/plug, sockets, fan regulators and connection to wiring, metal boxes boards are to be concealed in the walls of following sizes (d) 12 Module | 50 Numbers | ₹461 | ₹23,050 |
| 36Supply and laying of HDPE pipe with outer dia 160 mm and inner dia 140 mm as per relevant IS and explanatory note. | 1,000 Metre | ₹1,531 | ₹15,31,000 |
| 37Design, supply, erection, testing and commissioning of sheet enclosure mad out of 16 SWG MS sheet hylem sheet,locking arrangement consisting of 1x32 DP MCB power coated paint and other connected accessories etc. | 11 Numbers | ₹1,651 | ₹18,161 |
| 38Transportation of Material from Railway store to site by Truck | 7 Per Trip | ₹16,313 | ₹1,14,191 |
| 39Supply of 16 meter height mast lighting system complete with raising lowering arrangement and suitable Lantern Carriage for 9x150/120 watt LED. Light luminaries and control gear including accessories like lighting conductor, aviation neon light, integral drum winch compensating disc head frame, power tool, manual tool, double frame with foundation bolts etc.including casting of RCC foundation as recommended by manufacturer and as per explanatory note including erection, testing and commissioning. | 18 Numbers | ₹3,07,400 | ₹55,33,200 |
| 40Design, manufacture supply, installation, testing & commissioning of double door timer control panel suitable to operate 3 phase 4 wire 415 Volt AC supply system for automatic switching OFF & ON of all luminaries as per technical specification with following accessories:- MCB (TPN) 63 A, B/C 10 KA-01 No Timer with CM 40 contactor chargeable cells/battery-1 No. Toggle switch-1 No. | 18 Numbers | ₹22,670 | ₹4,08,060 |
| 41Fabrication, supply and erection of Fencing around the high mast in square shape size 2MX2M and height 1.5 M from ground level fabricated from MS angle size 40x40x6 mm, MS flat size 40x6 mm AND WIRE MESH MADE OF 8 SWG wire and 1M wide hinged type lockable door as per drawing approved by Railway including grouting, CC platform around the high mast above 0.30 M above ground level and painting etc.and as per technical specification. | 18 Numbers | ₹7,227 | ₹1,30,086 |
| 42Supply of 150 watt LED based Flood light fitting with all accessories including testing, commissioning and earthing including connections with 2x2.5 sq.mm PVC insulated multi-stranded ISI marked copper conductor cable from Junction Box to fitting as per PCEE/NR/121-Elect/PS/2019 (REV.-'4'), dt:04.11.2019 (Attached) or latest and as per explanatory note. | 54 Numbers | ₹19,954 | ₹10,77,516 |
| 43Supply of 120 watt LED based Flood light fitting with all accessories including testing, commissioning and earthing including connections with 2x2.5 sq.mm PVC insulated multi-stranded ISI marked copper conductor cable from Junction Box to fitting as per PCEE/NR/121-Elect/PS/2019 (REV.-'4'), dt:04.11.2019 (Attached) or latest and as per explanatory note. | 108 Numbers | ₹11,284 | ₹12,18,672 |
| 44Supply, Erection testing and commissioning of automatic colour lighting signalling control and distribution panel as per RDSO drg. No.ETI/PSI/35-04 & specification no. TI/SPC/PSI/GLS/023 from Core/RDSO approved sources. (a) 10 KVA, 63 Amp | 1 Numbers | ₹53,791 | ₹53,791 |
| 45Supply and fixing of rain proof MS box of suitable size of housing MCCB with hinged and lockable door on AT mast with suitable MS clamp should be painted and powdered coated: MCCB 63 Amp, 3 Pole | 1 Numbers | ₹3,678 | ₹3,678 |
| 46Supply, Installation, Testing and Commissioning of 1200 mm/1400 mm sweep energy efficient ceiling fan complete in all respect as per PCEE/NR's spec no. CEE/NR/123-Elect/PS/2018 dt. 15.10.2023 complete with capacitor, double ball bearing, shackle, canopy with regulator as per site requirement | 50 Numbers | ₹2,634 | ₹1,31,700 |
| 47Supply, erection, fixing, testing & commissioning of BLDC Ceiling Fan of sweep 1200 mm, Air delivery range from 210 cubic metre per minute to 220 cubic metre per minute and input power consumption range from 26 W to 35 W (Star Rating- 5 Star, Service Value - 6 & above cubic metre per minute per watt ) with remote for speed control of fan suitable for operation on 1 Ph, 50 Hz, 240 V power supply system (conform to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ) | 90 Numbers | ₹2,917 | ₹2,62,530 |
| 48Laying of 400 Sq mm Single core Unarmoured LT XLPE insulated aluminium conductor cable 1.1 KV grade conforming to IS 7098 Pt.(Latest Version) in trench of sub station including holding of cable with approved cleats, filling of trench with dry ordinary sand, holding of cable on panels with frames manufacture with MS angle 50x50x6 mm and & MS Flat 50x6 mm as per drawing approved by railway and explanatory note including end termination in LT Panels/AMF Panels with aluminium crimping socket, Testing and commissioning. Note- Cable will be supplied from the store of SSE/E/C/MB & SSE/E/C/UMB. | 300 Metre | ₹39 | ₹11,700 |
| 49Design, supply, testing & commissioning of On-Grid connected Solar Photo Voltaic (PV) Plant without battery backup complete with the following items : a) Mono PERC half cut type (PV Module), b) Solar Grid Connected String Inverter consisting of Maximum Power Point Tracker (MPPT) along with Data Logger with provision for data transferring (RS-485, Wifi, GPRS, RF) to remote service platform for data storage and analysis displayed in various visual and graphical formats on Web-App & big screen display. Item should conform to relevant IS and should be of approved make as per explanatory note and technical specification. | 85 KWp | ₹43,857 | ₹37,27,845 |
| 50Supply, installation, testing and commissioning of 1400 VA sinewave inverter with following features of make Sukam, Luminous or Microtek with supply of tubular plate 150 AH batteries of make Exide Model IT500 or similar. The complete inverter unit with batteries should be housed in MS/Plastic portable trolley duly paint finished. (i) Input DC voltage 24 Volts DC (ii) Input AC Voltage 135-275 Volts (iii) Output voltage 220 Volt + 8% (iv) Output wave form Sine wave (v) Output 1400 VA or above (vi) LED display main ON, Inverter ON, LOW Battery, Over Charge, Mains Low and High input voltage (vii) Protections over load, short circuit, Low Battery, Over Charge, Mains Low and High input voltage | 5 Numbers | ₹41,410 | ₹2,07,050 |
| 51Supply, fixing, testing & commissioning of LED light luminaries 595 X 595 mm size, Tile type, having system wattage 36-45 Watt , CRCA body powder coated , high efficiency milky white PMMA diffuser with no bright spot visible, complete with all mounting arrangement accessories conforming to CEE/NR specification no. CEE/NR/121- Elect/PS/2018 (REV-3), dt. 28.06.2018 & PCEE/NR/121-Elect/PS/2019 (REV.-'4'), dt: 04.11.2019 (Attached) or latest. | 40 Numbers | ₹4,832 | ₹1,93,280 |
| 52Supply and fixing of RCCB 2P 25 A 30 mA with metal enclosure. RCCB and metal enclosure should be of same make of reputed manufacturer and as per specification and explanatory note. | 15 Numbers | ₹2,514 | ₹37,710 |
| 53Supply, installation, testing and commissioning of 63 Amp 4P- RCCB 100 mA, 50 Hz in TPN DB. As per specification and explanatory note | 3 Numbers | ₹3,671 | ₹11,013 |
| Total | ₹2,10,03,791.95 | ||
Bids quote a rate in rupees for each item · The total matches the advertised value.
Documents
3 files- PDFNotice inviting tenderviewNitPdf_5583772.pdf (opens in a new tab)
- PDFTender Document T 65 A1TenderT65A.pdfNo direct link in the notice; see the notice, page 12
- PDFAnnexure-V(A)Annexure-V(A).pdf (opens in a new tab)
Documents to submit
Commercial-Compliance
- Document required
Requisite Bid Security, A . (ONLINE mode-CASH ) (No Documentary Proof required) B. ONLINE MODE-BG (BG Scanned copy to be uploaded with Tender Documents) Note for B :- The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days of deadline of submission of bids.
- Document required
Upload your bank details i.e. Name of the Bank along with Bank Branch Code, Account Number, IFSC Code as per Form-14 (Real Time Gross Saving (RTGS)/ National Electronic Fund Transfer (NEFT) (Model Mandate Form)) of tender document.
- Document required
Tenderers are required to fill up/upload requisite details in prescribed proforma of Annexure-L(COMPLETION CERTIFICATE) of tender document, without which the offer is liable to be rejected.
- Document required
Tenderers are compulsorily required to upload undertaking as per Annexure-Q as stipulated in 2.2.12 of "Special Tender Conditions and instruction to tenderers". If annexure-Q is not submitted/uploaded at the time of tendering then the same shall be submitted after issue of LOA and before signing of the Contract Agreement.
- Document required
The tenderers shall upload a certificate stating that they are not liable to be disqualified and all their statements/documents submitted along with bid are true and factual. Standard format of the certificate to be submitted by the bidder is enclosed as M (A), as the case may be, non-submission of a certificate by the bidder shall result in summarily rejection of his/their bid and it shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self- attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document. It will not be obligatory on the part of Tender Committee to scrutinize beyond the submitted document of tenderer as far as his qualification for the tender is concerned, as stipulated in 2.2.6 of "Special tender Conditions and instructions to tenderers" without which the offer will be considered incomplete and will be rejected similarly.
- Document required
Tenderer must compulsorily upload ANNEXURE-K-3 and ANNEXURE-K-4 If tender submitted on behalf of Partnership Firm, relevant Annexures K-3 and K-4 as Declaration to be submitted by the tenderer along with tender document.
Show all 16
- Document required
Tenderer shall certify that they are not black listed or debarred by Railways or any other Ministry/ Department/PSU (Public Sector undertaking) of the Govt. of India/State Govt. from participation in tenders/contract on the date of opening of bids either in their individual capacity or as a member of the JV firm in which they were/are members.
- Document optional
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Technical-Compliances
- Document required
Electrical Contractor's Licence The contractor shall submit a valid Class 'A' Electrical contractor's Licence as applicable from the concerned statutory authority before signing of Contract Agreement. OR In case of subletting of Contract, The contractor shall make a formal Agreement with suitable sub-contractor, for executing Electrical Portion of Work with sub-contractor, holding a valid Class 'A' Electrical Contractor's licence as applicable. The contractor shall submit a formal agreement duly notarized, legally enforceable in the Court of Law, between main contractor and sub-contractor for the Electrical component of work proposed to be executed by the sub-contractor prior to signing of the contract agreement. Note:- In case the contractor is a partnership firm, the Electrical contractor License shall be either in the name of partnership firm or in the name of any of the constituent partners of such partnership firm. In case the contractor is a JV, the electrical contractor's License shall be either in the name of the JV or in the name of any constituent partners of such JV. In case one of the constituent of JV firm is a partnership firm, the Electrical contractor Licence shall be either in the name of partnership firm or in the name of any of the constituent partners of such partnership firm.
- Document required
Tenderers are required to upload requisite details in prescribed Performa given in Annexure-F (LIST OF ENGINEERS/PERSONNEL ALREADY AVAILABLE/ PROPOSED TO BE EMPLOYED FOR DEPLOYMENT ON THIS WORK)of tender document without which the offer is liable to be rejected
- Document required
Tenderers are required to upload requisite details in prescribed Performa given in Annexure-E (Details of Plant and Machinery already available with the firm)of tender document without which the offer is liable to be rejected.
Custom
- Document required
Mandatory details to be filled and uploaded by Tenderer while submitting their offer as per ANNEXURE-D (Constitution of firm) of tender document.
- Document required
Constitution of the Firm/concern - Sole Proprietorship/Partnership Firm/ Company/ JV/Society (upload as applicable) as per clause No 2.4.1 of tender document.
- Document required
Copy of PAN No. (card)
- Document required
Special attention of tenderers is drawn to clause 2.3 (Credentials Of Tenderer) of "Spl tender condition & instruction to tenderers", as per which they should submit the requisite documents along with tender pertaining to their technical & financial eligibility.
- Document optional
All the mandatory documents given in Tender documents to be uploaded without which the offer will be considered incomplete and will be rejected summarily
Eligibility
Special Financial Criteria
- Document required
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-I, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Special Technical Criteria
- Document required
Technical Eligibility Criteria (Applicable for Tender value more than 50 Lakhs): The tenderer must have successfully completed or substantially completed any of the following (by any Government organizations) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender.
- Document required
(b)
- In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for (b)(i): Separate completed works of minimum required values shall also be considered for fulfilment of technical eligibility criteria for different components. (b)
- In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. Any work or set of works shall be considered to be a separate component, only when cost of the component is more than 2 crore each. (b)
- To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 2.3.3(a) (ii) of the Tender Document or through subcontractor fulfilling the requirements as per clause 2.3.3 of the Tender Document or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. Among the components of composite tender stipulated for evaluation of technical eligibility, tenderer can execute one or more specified components by engaging sub-contractor. The component(s) of work as stipulated in the tender document have to be mandatorily executed by the tenderer and others component(s) as stipulated in the tender document can be executed by the tenderer himself or by engaging sub-contractor. The components which are permitted to be executed by sub-contractor will be further classified in the tender document into those which will be considered towards technical eligibility and the remaining which will not be considered towards technical eligibility. For the component(s) which are to be mandatorily executed by the tenderer, the technical eligibility shall be assessed as per clause 2.3.2 (A) (v) (b) (i) of the tender document. In case of tenderer is JV, the Technical eligibility for the component proposed to be executed by the tenderer shall be fulfilled as per clause 2.3.2 (A) (xii) and Annexure-K. The technical eligibility for such stipulated components of work for which engagement of sub-contractor is permitted shall be evaluated as per clause 2.3.3 (a) (ii) of the tender document whether it is executed by tenderer or sub-contractor.
- Document required
Note for Technical Eligibility Criteria Work experience certificate from private individual shall not bec onsidered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turn over of Rs.500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered atleast 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits credentials issued by public listed company, the tenderer shall also submit alongwith the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid bycompany shall be enclosed in support of above. Completion Certificate/Experience Certificate issued by Competent Authority in favour of tenderer duly stating Name & Final cost of the Work, Date of Completion etc. as per Annexure -L must be uploaded along with the offer.
- Document required
Similar Nature of Work (in case of Single similar nature of work): Wiring/Rewiring in buildings with associated electrical works. OR Lighting arrangement in buildings, circulating area, yard, street etc. with associated electrical works. OR Wiring/Rewiring, Lighting arrangement in buildings with associated electrical works.
Partnership firm/Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.
Please submit a certificate in the prescribed format (please download the format from the link given below). Non submission of the certificate, or submission of certificate either not properly filled in, or in a format other than the prescribed format shall lead to summary rejection of your offer. ( Click here to download the Format of Self Certification)
Check each criterion against the tender notice before you bid.
Commercial conditions
- EMD
- ₹420,100
- Tender fee
- None
Terms & conditions
4 conditionsCheck Lst
Check list of Mandatory documents to be uploaded by the tenderer(s) while submitting their offer. (SINGLE PACKET) as details of such items are given at page no. 4 of Tender document.
General Instructions
The General instruction is mentioned in Tender document as in Part-I Chapter-I "General Tender Conditions and Instruction to Tenderer(s)".
Tenderers are compulsorily required to fill up/submit requisite details in prescribed Performa of Annexure C to G, I, J and Annexure-L as per tender document without which the offer may be considered as incomplete and be liable to be rejected.
Special Conditions
Special condition of the offer must be consider as given in Chapter-I (2nd Sheet i.e. SPECIAL TENDER CONDITIONS AND INSTRUCTIONS TO TENDERER/S) of Tender document.
Bidder declarations (12)
Undertakings
I/We have visited the works site and I/We am/are aware about the site conditions.
I/We am/are to abide by the terms and conditions mentioned in Tender Document (Tender no.17-Elect/C/T/GPS/MB/65-A in all as well as the Indian Railways STANDARD GENERAL CONDITIONS OF CONTRACT, GCC April' 2022 with ACS-11 dated 13.03.2026 or Latest, Standard, are applicable as corrected up to date.
Certifications
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
Similar open tenders
Soonest first- 6 daysleftUpgradation / Modernisation of infrastructure for Goods shed at (i) Salem & Salem Market…Ministry of Railways · Closes 22 Oct 2026
- 7 daysleftElectrical work in connection with Construction of Crew & Train Manager Lobby at Chandaus…Ministry of Railways · Closes 23 Oct 2026
- 7 daysleftElectrical work in connection with Provision of First foot over bridge with cover shed at…Ministry of Railways · Closes 23 Oct 2026
- 7 daysleftElectrical work in c/w Augmentation of Service building for SSE(C&W) office in lieu of ol…Ministry of Railways · Closes 23 Oct 2026
- 10 daysleftInfrastructure Upgradation and Electrical Improvement Works in Jabalpur Division (i) REWA…Ministry of Railways · Closes 26 Oct 2026
- 19 daysleftSouth Central Railway - Construction Organisation : Secunderabad Divison : Secunderabad…Ministry of Railways · Closes 4 Nov 2026
- 25 daysleftNAME OF WORK :- Electrical work in connection with Improvement to passenger Amenities at…Ministry of Railways · Closes 10 Nov 2026
- 125 daysleftConstruction of New BG Railway line from Ch: 273500 Between Gyaspurkhedi (Including) to C…Ministry of Railways · Closes 18 Feb 2027
Search similar in the explorerFind this tender in the explorer