Browse all bids
GeMOpenGoodsBid

Bathroom Water Shower (V2), Health Faucet, LED Luminaire (Recessed Luminaire) (Ceiling Light) Conforming To IS 10322 (Part 5/Section 2) (V4) (Under BIS Scheme - II), Rechargeable LED Batten Light (Em…

Indian Army

Ministry of Defence › Department of Military Affairs

Delivers to

Bikaner, Ganganagar, Rajasthan

Overview

10 facts from the tender

Ministry of Defence published this goods tender on GeM on 9 Oct 2026, for Bikaner, Ganganagar, Rajasthan. The estimated value is ₹1.3 Cr and the EMD is ₹2.6 L. It closes on 19 Oct 2026, 6:00 pm IST. Bid number GEM/2026/B/8076422.

Timeline

  1. Published9 Oct 2026 · 4:14 pm
  2. Reverse auctionIf the bid qualifies, after evaluation

Bidding

Bid type
Bid
Evaluation method
Total value wise evaluation
Packet type
Two Packet Bid
Reverse auction
Yes, 50% Lowest Priced Technically Qualified Bidders
Total quantity
8,224

Buyer

Created by
bsogenbknr
Location
Bikaner, Ganganagar · Rajasthan
Portal
GeM

Important dates

Published
9 Oct 2026, 4:14 pm IST
Closes
19 Oct 2026, 6:00 pm IST

Items & delivery

53 items · Address masked by GeM

Showing 53 of 53
01Bathroom Water Shower (V2)Quantity92 piecesDelivery30 daysDetailsClose

Delivery location***********Sri Ganganagar

Quantity
52 pieces
Delivery
30 days

Delivery location***********Bikaner

Quantity
40 pieces
Delivery
30 days

Specifications & requirements

Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Type of shower
Overhead shower (Wall mount with shower arm)
Material of body/face plate
ABS
Finish of face plate
Chrome plated
Type of Water Flow
Rainfall and Multiple flow
Type of Multiple flow
Rainstream
Shape of Shower
Round
Size of Shower
100 mm
Overall length of Hand Shower (in mm)
NA
Length of Hand Shower Tube (in mt)
NA
Diameter of Hand Shower Tube (in mm)
NA
Material of Hand Shower Tube
NA
Overall length of Shower Arm (in mm)
200
Warranty (in Years)
2
02Bathroom Water Shower (V2)Quantity120 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Delivery
30 days

Specifications & requirements

Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Type of shower
Overhead shower (Wall mount with shower arm)
Material of body/face plate
ABS
Finish of face plate
Chrome plated
Type of Water Flow
Only Rainfall
Type of Multiple flow
NA
Shape of Shower
Round
Size of Shower
120 mm
Overall length of Hand Shower (in mm)
NA
Length of Hand Shower Tube (in mt)
NA
Diameter of Hand Shower Tube (in mm)
NA
Material of Hand Shower Tube
NA
Overall length of Shower Arm (in mm)
300
Warranty (in Years)
1
03Bathroom Water Shower (V2)Quantity42 piecesDelivery30 daysDetailsClose

Delivery location***********Sri Ganganagar

Quantity
26 pieces
Delivery
30 days

Delivery location***********Bikaner

Quantity
16 pieces
Delivery
30 days

Specifications & requirements

Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Type of shower
Overhead shower (Wall mount with shower arm)
Material of body/face plate
ABS
Finish of face plate
Chrome plated
Type of Water Flow
Only Rainfall
Type of Multiple flow
NA
Shape of Shower
Round
Size of Shower
150 mm
Overall length of Hand Shower (in mm)
NA
Length of Hand Shower Tube (in mt)
NA
Diameter of Hand Shower Tube (in mm)
NA
Material of Hand Shower Tube
NA
Overall length of Shower Arm (in mm)
150
Warranty (in Years)
2
04Health FaucetQuantity96 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Quantity
2 pieces
Delivery
30 days

Delivery location***********Sri Ganganagar

Quantity
44 pieces
Delivery
30 days

Delivery location***********Bikaner

Quantity
50 pieces
Delivery
30 days

Specifications & requirements

Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Pressure rating (Bar)
1.5
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Flow Rate , Minimum (lpm)
9, 10, 11 Or higher
Material of construction
Brass
Hose Material
Stainless Steel
Hose length ( in meters)
1.5
Handle Type
Lever
Mounting Type
Wall mounted
Anti bacterial coating
No
05LED Luminaire (Recessed Luminaire) (Ceiling Light) Conforming To IS 10322 (Part 5/Section 2) (V4) (Under BIS Scheme - II)Quantity62 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Delivery
30 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
System Wattage (in Watt)
36
LED Luminaire System Efficacy (in lumen/watt)
100 Or higher
Shape of the Fixture
Square
Size of the Fixture
600 mm x 600 mm
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
LED Colour Temperature [Hint: Warm White (2700K-3000K), Bright White (3500 K-4000 K), Cool White/Daylight (5000 K- 6500 K)]
6500 K
Type of Mounting
Recessed
Diffuser Material
Polycarbonate (UV Stabilized)
Ingress Protection
IP20 Or higher
06LED Luminaire (Recessed Luminaire) (Ceiling Light) Conforming To IS 10322 (Part 5/Section 2) (V4) (Under BIS Scheme - II)Quantity20 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Delivery
30 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
System Wattage (in Watt)
12
LED Luminaire System Efficacy (in lumen/watt)
100 Or higher
Shape of the Fixture
Square
Size of the Fixture
200 mm x 200 mm
LED Colour Temperature [Hint: Warm White (2700K-3000K), Bright White (3500 K-4000 K), Cool White/Daylight (5000 K- 6500 K)]
6500 K
Type of Mounting
Recessed
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Diffuser Material
Polycarbonate (UV Stabilized)
Ingress Protection
IP20 Or higher
07Rechargeable LED Batten Light (Emergency LED Tube Light) (V2)Quantity46 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Delivery
30 days

Specifications & requirements

Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Rated Wattage (in Watts)
20.0 (Watt)
Length of LED Batten Light
4.0 (foot)
LED Colour Temperature [Hint: Warm White (2700K-3000K), Bright White (3500 K-4000 K), Cool White/Daylight (5000 K- 6500 K)]
6500K, 6500 K
Backup Time
3, 4, 5, 6 Or higher (hour)
08LED Luminaire (Recessed Luminaire) (Ceiling Light) Conforming To IS 10322 (Part 5/Section 2) (V4) (Under BIS Scheme - II)Quantity44 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Delivery
30 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
System Wattage (in Watt)
12
LED Luminaire System Efficacy (in lumen/watt)
100 Or higher
Shape of the Fixture
Round
Size of the Fixture
76 mm
LED Colour Temperature [Hint: Warm White (2700K-3000K), Bright White (3500 K-4000 K), Cool White/Daylight (5000 K- 6500 K)]
6500 K
Type of Mounting
Recessed
Ingress Protection
IP20 Or higher
09LED Luminaire (Recessed Luminaire) (Ceiling Light) Conforming To IS 10322 (Part 5/Section 2) (V4) (Under BIS Scheme - II)Quantity34 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Delivery
30 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
System Wattage (in Watt)
12
LED Luminaire System Efficacy (in lumen/watt)
100 Or higher
Shape of the Fixture
Round
Size of the Fixture
76 mm
LED Colour Temperature [Hint: Warm White (2700K-3000K), Bright White (3500 K-4000 K), Cool White/Daylight (5000 K- 6500 K)]
6500 K
Type of Mounting
Surface
Ingress Protection
IP20 Or higher
10LED Batten Light (LED Tube Light) (V2)Quantity326 piecesDelivery30 daysDetailsClose

Delivery location***********Sri Ganganagar

Delivery
30 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Rated Wattage (in Watts)
10.0
Length of LED Batten Light
2.0 (foot)
Rated Luminous Efficacy (in lumen/watt)
100, 110 Or higher
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
LED Colour Temperature [Hint
6500 K
11LED Batten Light (LED Tube Light) (V2)Quantity40 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Delivery
30 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Rated Wattage (in Watts)
20.0
Length of LED Batten Light
4.0 (foot)
LED Colour Temperature [Hint: Warm White (2700K-3000K), Bright White (3500 K-4000 K), Cool White/Daylight (5000 K- 6500 K)]
3000 K
12LED Batten Light (LED Tube Light) (V2)Quantity2,754 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Quantity
44 pieces
Delivery
30 days

Delivery location***********Sri Ganganagar

Quantity
1,710 pieces
Delivery
30 days

Delivery location***********Bikaner

Quantity
1,000 pieces
Delivery
30 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Rated Wattage (in Watts)
20.0
Length of LED Batten Light
4.0 (foot)
Rated Luminous Efficacy (in lumen/watt)
110 Or higher
LED Colour Temperature [Hint: Warm White (2700K-3000K), Bright White (3500 K-4000 K), Cool White/Daylight (5000 K- 6500 K)]
6500 K
13Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity132 piecesDelivery30 daysDetailsClose

Delivery location***********Sri Ganganagar

Delivery
30 days

Specifications & requirements

Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Angle stop valve
Dimension
As per table 5 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Brass rods
Material of inlet tubes
Copper tubes
Material of flanges
Forged brass
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Forged brass
Material of circlip, wire locks
Phosphor bronze wire
Material of 'O' ring , gasket, and seat washer
Synthetic rubber
Material of Knob and knob components
Cast brass
Aerating device fitted with tap
No
Flow straightening device fitted with tap
No
Warranty (in months)
12
Type of Fitting
Quarter Turn
14Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity252 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Quantity
6 pieces
Delivery
30 days

Delivery location***********Bikaner

Quantity
246 pieces
Delivery
30 days

Specifications & requirements

Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Angle stop valve
Dimension
As per table 5 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Cast brass
Material of inlet tubes
Brass tubes
Material of flanges
Die cast brass
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Forged brass
Material of circlip, wire locks
Phosphor bronze sheet
Material of 'O' ring , gasket, and seat washer
Synthetic rubber
Material of Knob and knob components
Zinc base alloys
Aerating device fitted with tap
Yes
Flow straightening device fitted with tap
Yes
Warranty (in months)
6
15Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity20 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Delivery
30 days

Specifications & requirements

Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Angle stop valve
Dimension
As per table 5 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Cast brass
Material of inlet tubes
Copper tubes
Material of flanges
Forged brass
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Extruded brass rods
Material of circlip, wire locks
Phosphor bronze wire
Material of 'O' ring , gasket, and seat washer
Acrylonitrille butadiene rubber (ABR)
Material of Knob and knob components
Forged brass
Aerating device fitted with tap
No
Flow straightening device fitted with tap
No
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Warranty (in months)
24
Type of Fitting
Two way Angle Valve
16Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity300 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Delivery
30 days

Specifications & requirements

Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Type 1 Bib tap
Dimension
As per table 4 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Die cast brass
Material of inlet tubes
Brass tubes
Material of flanges
Brass sheet
Material of diverter and diverter components
NA
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Material of spindle, glands, washer plate, nuts, screw and pin
Rolled brass rods
Material of circlip, wire locks
Phosphor bronze wire
Material of 'O' ring , gasket, and seat washer
Synthetic butadiene rubber (SBR)
Material of Knob and knob
Zinc base alloys
Aerating device fitted with tap
Yes
Flow straightening device fitted with tap
Yes
Warranty (in months)
12
Type of Fitting
Quarter Turn
17Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity462 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Quantity
6 pieces
Delivery
30 days

Delivery location***********Sri Ganganagar

Quantity
116 pieces
Delivery
30 days

Delivery location***********Bikaner

Quantity
340 pieces
Delivery
30 days

Specifications & requirements

Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Item
Type 1 Bib tap
Dimension
As per table 4 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Cast brass
Material of inlet tubes
Brass tubes
Material of flanges
Cast brass
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Forged brass
Material of circlip, wire locks
Stainless steel
Material of 'O' ring , gasket, and seat washer
Synthetic butadiene rubber (SBR)
Material of Knob and knob components
Zinc base alloys
Aerating device fitted with tap
Yes
Flow straightening device fitted with tap
No
Warranty (in months)
12
18Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity50 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Delivery
30 days

Specifications & requirements

Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Type 1 Bib tap
Dimension
As per table 4 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Cast brass
Material of inlet tubes
Brass tubes
Material of flanges
Cast brass
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Extruded brass rods
Material of circlip, wire locks
Phosphor bronze sheet
Material of 'O' ring , gasket, and seat washer
Synthetic butadiene rubber (SBR)
Material of Knob and knob components
Cast brass
Aerating device fitted with tap
Yes
Flow straightening device fitted with tap
No
Warranty (in months)
6
Type of Fitting
Bid Cock with Nozzle
19Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity264 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Quantity
4 pieces
Delivery
30 days

Delivery location***********Sri Ganganagar

Quantity
160 pieces
Delivery
30 days

Delivery location***********Bikaner

Quantity
100 pieces
Delivery
30 days

Specifications & requirements

Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Type 1 Bib tap
Dimension
As per table 4 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Cast brass
Material of inlet tubes
Brass tubes
Material of flanges
Stainless steel sheet
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Extruded brass rods
Material of circlip, wire locks
Phosphor bronze sheet
Material of 'O' ring , gasket, and seat washer
Synthetic rubber
Material of Knob and knob components
Zinc base alloys
Aerating device fitted with tap
Yes
Flow straightening device fitted with tap
Yes
Warranty (in months)
12
20Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity150 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Quantity
2 pieces
Delivery
30 days

Delivery location***********Sri Ganganagar

Quantity
110 pieces
Delivery
30 days

Delivery location***********Bikaner

Quantity
38 pieces
Delivery
30 days

Specifications & requirements

Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Concealed stop valve
Dimension
As per table 5 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Cast brass
Material of inlet tubes
Brass tubes
Material of flanges
Stainless steel sheet
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Extruded brass rods
Material of circlip, wire locks
Phosphor bronze sheet
Material of 'O' ring , gasket, and seat washer
Synthetic rubber
Material of Knob and knob components
Zinc base alloys
Aerating device fitted with tap
No
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Flow straightening device fitted with tap
No
Warranty (in months)
12
21Miniature Circuit Breakers (MCB) For AC Operation Marked To IS/IEC 60898 (Part 1)Quantity10 piecesDelivery30 daysDetailsClose

Delivery location***********Sri Ganganagar

Delivery
30 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Number of Pole (Hint: "P" - Pole; "PP" - Protected Pole)
2 P with 2 PP
Rated Current (in Ampere)
20
Rated Voltage (in Volts)
415 V, AC, 240 / 415 V, AC
Instantaneous Tripping Current Type
C
Rated Short Circuit Capacity (in Ampere)
10000
Provision of Steel Sheet Enclosure for MCB
Without enclosure
22Miniature Circuit Breakers (MCB) For AC Operation Marked To IS/IEC 60898 (Part 1)Quantity40 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Delivery
30 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Number of Pole (Hint: "P" - Pole; "PP" - Protected Pole)
1 P
Rated Current (in Ampere)
10
Rated Voltage (in Volts)
240 / 415 V, AC
Instantaneous Tripping Current Type
C
Rated Short Circuit Capacity (in Ampere)
10000
Provision of Steel Sheet Enclosure for MCB
Without enclosure
23Miniature Circuit Breakers (MCB) For AC Operation Marked To IS/IEC 60898 (Part 1)Quantity164 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Quantity
4 pieces
Delivery
30 days

Delivery location***********Sri Ganganagar

Quantity
130 pieces
Delivery
30 days

Delivery location***********Bikaner

Quantity
30 pieces
Delivery
30 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Number of Pole (Hint: "P" - Pole; "PP" - Protected Pole)
1 P
Rated Current (in Ampere)
16
Rated Voltage (in Volts)
240 / 415 V, AC
Instantaneous Tripping Current Type
C
Rated Short Circuit Capacity (in Ampere)
10000
Provision of Steel Sheet Enclosure for MCB
Without enclosure
24Miniature Circuit Breakers (MCB) For AC Operation Marked To IS/IEC 60898 (Part 1)Quantity196 piecesDelivery30 daysDetailsClose

Delivery location***********Sri Ganganagar

Quantity
146 pieces
Delivery
30 days

Delivery location***********Bikaner

Quantity
50 pieces
Delivery
30 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Number of Pole (Hint: "P" - Pole; "PP" - Protected Pole)
1 P
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Rated Current (in Ampere)
20
Rated Voltage (in Volts)
240 / 415 V, AC
Instantaneous Tripping Current Type
C
Rated Short Circuit Capacity (in Ampere)
10000
Provision of Steel Sheet Enclosure for MCB
Without enclosure
25Miniature Circuit Breakers (MCB) For AC Operation Marked To IS/IEC 60898 (Part 1)Quantity144 piecesDelivery30 daysDetailsClose

Delivery location***********Sri Ganganagar

Quantity
106 pieces
Delivery
30 days

Delivery location***********Bikaner

Quantity
38 pieces
Delivery
30 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Number of Pole (Hint: "P" - Pole; "PP" - Protected Pole)
1 P
Rated Current (in Ampere)
25
Rated Voltage (in Volts)
240 / 415 V, AC
Instantaneous Tripping Current Type
C
Rated Short Circuit Capacity (in Ampere)
10000
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Provision of Steel Sheet Enclosure for MCB
Without enclosure
26Miniature Circuit Breakers (MCB) For AC Operation Marked To IS/IEC 60898 (Part 1)Quantity196 piecesDelivery30 daysDetailsClose

Delivery location***********Sri Ganganagar

Quantity
156 pieces
Delivery
30 days

Delivery location***********Bikaner

Quantity
40 pieces
Delivery
30 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Number of Pole (Hint: "P" - Pole; "PP" - Protected Pole)
1 P
Rated Current (in Ampere)
32
Rated Voltage (in Volts)
240 / 415 V, AC
Instantaneous Tripping Current Type
C
Rated Short Circuit Capacity (in Ampere)
10000
Provision of Steel Sheet Enclosure for MCB
Without enclosure
27Miniature Circuit Breakers (MCB) For AC Operation Marked To IS/IEC 60898 (Part 1)Quantity140 piecesDelivery30 daysDetailsClose

Delivery location***********Sri Ganganagar

Quantity
100 pieces
Delivery
30 days

Delivery location***********Bikaner

Quantity
40 pieces
Delivery
30 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Number of Pole (Hint: "P" - Pole; "PP" - Protected Pole)
1 P
Rated Current (in Ampere)
6
Rated Voltage (in Volts)
240 / 415 V, AC
Instantaneous Tripping Current Type
C
Rated Short Circuit Capacity (in Ampere)
10000
Provision of Steel Sheet Enclosure for MCB
Without enclosure
28Miniature Circuit Breakers (MCB) For AC Operation Marked To IS/IEC 60898 (Part 1)Quantity20 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Delivery
30 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Number of Pole (Hint: "P" - Pole; "PP" - Protected Pole)
1 P
Rated Current (in Ampere)
63
Rated Voltage (in Volts)
240 V, AC, 230 / 415 V, AC, 240 / 415 V, AC
Instantaneous Tripping Current Type
C
Rated Short Circuit Capacity (in Ampere)
10000
Provision of Steel Sheet Enclosure for MCB
Without enclosure
29Miniature Circuit Breakers (MCB) For AC Operation Marked To IS/IEC 60898 (Part 1)Quantity48 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Delivery
30 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Number of Pole (Hint: "P" - Pole; "PP" - Protected Pole)
2 P with 1 PP
Rated Current (in Ampere)
20
Rated Voltage (in Volts)
230 / 415 V, AC, 240 / 415 V, AC
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Instantaneous Tripping Current Type
C
Rated Short Circuit Capacity (in Ampere)
10000
Provision of Steel Sheet Enclosure for MCB
Without enclosure
30Miniature Circuit Breakers (MCB) For AC Operation Marked To IS/IEC 60898 (Part 1)Quantity56 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Quantity
4 pieces
Delivery
30 days

Delivery location***********Sri Ganganagar

Quantity
32 pieces
Delivery
30 days

Delivery location***********Bikaner

Quantity
20 pieces
Delivery
30 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Number of Pole (Hint: "P" - Pole; "PP" - Protected Pole)
2 P with 1 PP
Rated Current (in Ampere)
32
Rated Voltage (in Volts)
240 V, AC, 240 / 415 V, AC
Instantaneous Tripping Current Type
C
Rated Short Circuit Capacity (in Ampere)
10000
Provision of Steel Sheet Enclosure for MCB
Without enclosure
31Miniature Circuit Breakers (MCB) For AC Operation Marked To IS/IEC 60898 (Part 1)Quantity158 piecesDelivery30 daysDetailsClose

Delivery location***********Sri Ganganagar

Quantity
148 pieces
Delivery
30 days

Delivery location***********Bikaner

Quantity
10 pieces
Delivery
30 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Number of Pole (Hint: "P" - Pole; "PP" - Protected Pole)
2 P with 1 PP
Rated Current (in Ampere)
40
Rated Voltage (in Volts)
240 V, AC, 230 / 415 V, AC
Instantaneous Tripping Current Type
C
Rated Short Circuit Capacity (in Ampere)
10000
Provision of Steel Sheet Enclosure for MCB
Without enclosure
32Miniature Circuit Breakers (MCB) For AC Operation Marked To IS/IEC 60898 (Part 1)Quantity164 piecesDelivery30 daysDetailsClose

Delivery location***********Sri Ganganagar

Quantity
144 pieces
Delivery
30 days

Delivery location***********Bikaner

Quantity
20 pieces
Delivery
30 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Number of Pole (Hint: "P" - Pole; "PP" - Protected Pole)
2 P with 1 PP
Rated Current (in Ampere)
63
Rated Voltage (in Volts)
240 / 415 V, AC
Instantaneous Tripping Current Type
C
Rated Short Circuit Capacity (in Ampere)
10000
Provision of Steel Sheet Enclosure for MCB
Without enclosure
33Miniature Circuit Breakers (MCB) For AC Operation Marked To IS/IEC 60898 (Part 1)Quantity82 piecesDelivery30 daysDetailsClose

Delivery location***********Sri Ganganagar

Delivery
30 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Number of Pole (Hint: "P" - Pole; "PP" - Protected Pole)
4 P with 3 PP
Rated Current (in Ampere)
63
Rated Voltage (in Volts)
415 V, AC
Instantaneous Tripping Current Type
C
Rated Short Circuit Capacity (in Ampere)
10000
Provision of Steel Sheet Enclosure for MCB
Without enclosure
34Plasticized PVC Tapes With Non-Thermosetting Adhesive For Electrical Purpose (V2) ISI Marked To IS 7809 (Part 3/ Sec1)Quantity16 rollsDelivery30 daysDetailsClose

Delivery location***********Sri Ganganagar

Delivery
30 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Governing Specification
As per IS 7809 (Part 3/ Sec1)
Type
General Purpose Type (suitable for application at temperature above 0°C, and designated as F- PVCp/90/0/Tp)
Length of tape in a roll (in metre)
25
Width of tape (in mm) (Tolerance as per clause 6.2.1 of the IS 7809 (part1))
15
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Thickness (in mm) (Tolerance ± 0.025 mm)
0.125
Appearance of tape
Opaque
35Plasticized PVC Tapes With Non-Thermosetting Adhesive For Electrical Purpose (V2) ISI Marked To IS 7809 (Part 3/ Sec1)Quantity200 rollsDelivery30 daysDetailsClose

Delivery location***********Bikaner

Delivery
30 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Governing Specification
As per IS 7809 (Part 3/ Sec1)
Type
General Purpose Type (suitable for application at temperature above 0°C, and designated as F- PVCp/90/0/Tp)
Length of tape in a roll (in metre)
10
Width of tape (in mm) (Tolerance as per clause 6.2.1 of the IS 7809 (part1))
20
Thickness (in mm) (Tolerance ± 0.025 mm)
0.125
Appearance of tape
Opaque
36Bathroom Water Shower (V2)Quantity60 piecesDelivery30 daysDetailsClose

Delivery location***********Sri Ganganagar

Delivery
30 days

Specifications & requirements

Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Type of shower
Hand Shower
Material of body/face plate
ABS
Finish of face plate
Chrome plated
Type of Water Flow
Only Rainfall
Type of Multiple flow
NA
Shape of Shower
Round
Size of Shower
75 mm
Overall length of Hand Shower (in mm)
200
Length of Hand Shower Tube (in mt)
1.5
Diameter of Hand Shower Tube (in mm)
12
Material of Hand Shower Tube
PVC
Overall length of Shower Arm (in mm)
NA
Warranty (in Years)
1
37LED Luminaire (Recessed Luminaire) (Ceiling Light) Conforming To IS 10322 (Part 5/Section 2) (V4) (Under BIS Scheme - II)Quantity220 piecesDelivery30 daysDetailsClose

Delivery location***********Sri Ganganagar

Quantity
196 pieces
Delivery
30 days

Delivery location***********Bikaner

Quantity
24 pieces
Delivery
30 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
System Wattage (in Watt)
18
LED Luminaire System Efficacy (in lumen/watt)
100 Or higher
Shape of the Fixture
Round
Size of the Fixture
150 mm
LED Colour Temperature [Hint: Warm White (2700K-3000K), Bright White (3500 K-4000 K), Cool White/Daylight (5000 K- 6500 K)]
6500 K
Type of Mounting
Recessed
Diffuser Material
Polycarbonate (UV Stabilized)
Ingress Protection
IP20 Or higher
38LED Luminaire (Recessed Luminaire) (Ceiling Light) Conforming To IS 10322 (Part 5/Section 2) (V4) (Under BIS Scheme - II)Quantity16 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Delivery
30 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
System Wattage (in Watt)
36
LED Luminaire System Efficacy (in lumen/watt)
90, 100 Or higher
Shape of the Fixture
Square
Size of the Fixture
600 mm x 600 mm
LED Colour Temperature [Hint: Warm White (2700K-3000K), Bright White (3500 K-4000 K), Cool White/Daylight (5000 K- 6500 K)]
6500 K
Type of Mounting
Surface
Diffuser Material
Polycarbonate (UV Stabilized), Polystyrene
Ingress Protection
IP20 Or higher
39Health FaucetQuantity34 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Delivery
30 days

Specifications & requirements

Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Pressure rating (Bar)
1
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Flow Rate , Minimum (lpm)
11 Or higher
Material of construction
Brass
Hose Material
Stainless Steel
Hose length ( in meters)
1
Finish
Chrome Finish
Handle Type
Lever
Mounting Type
Wall mounted
Anti bacterial coating
Yes
40Health FaucetQuantity6 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Delivery
30 days

Specifications & requirements

Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Pressure rating (Bar)
1
Flow Rate , Minimum (lpm)
9, 10, 11 Or higher
Material of construction
Brass
Hose Material
PVC
Hose length ( in meters)
1.2
Finish
Chrome Finish
Handle Type
Lever
Mounting Type
Wall mounted
Anti bacterial coating
Yes
41Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity332 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Quantity
6 pieces
Delivery
30 days

Delivery location***********Sri Ganganagar

Quantity
102 pieces
Delivery
30 days

Delivery location***********Bikaner

Quantity
224 pieces
Delivery
30 days

Specifications & requirements

Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Pillar tap
Dimension
As per table 3 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Cast brass
Material of inlet tubes
Brass tubes
Material of flanges
Stainless steel sheet
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Extruded brass rods
Material of circlip, wire locks
Phosphor bronze sheet
Material of 'O' ring , gasket, and seat washer
Synthetic rubber
Material of Knob and knob components
Zinc base alloys
Aerating device fitted with tap
Yes
Flow straightening device fitted with tap
Yes
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Warranty (in months)
12
42Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity76 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Quantity
2 pieces
Delivery
30 days

Delivery location***********Sri Ganganagar

Quantity
4 pieces
Delivery
30 days

Delivery location***********Bikaner

Quantity
70 pieces
Delivery
30 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
One hole pillar mounted combination tap assembly
Dimension
As per table 7 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Cast brass
Material of inlet tubes
Brass tubes
Material of flanges
Cast brass
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Forged brass
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Material of circlip, wire locks
Phosphor bronze sheet
Material of 'O' ring , gasket, and seat washer
Synthetic rubber
Material of Knob and knob components
Cast brass
Aerating device fitted with tap
Yes
Flow straightening device fitted with tap
Yes
Warranty (in months)
6
Type of Fitting
CP Center Hole Basin Mixture
43Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity2 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Delivery
30 days

Specifications & requirements

Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Item
One hole pillar mounted combination tap assembly
Dimension
As per table 7 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Die cast brass
Material of inlet tubes
Brass tubes
Material of flanges
Brass sheet
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Rolled brass rods
Material of circlip, wire locks
Phosphor bronze sheet
Material of 'O' ring , gasket, and seat washer
Neoprene rubber
Material of Knob and knob components
Die cast brass
Aerating device fitted with tap
Yes
Flow straightening device fitted with tap
Yes
Warranty (in months)
12
Type of Fitting
CP Pillar Tap Swan Neck
44Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity42 piecesDelivery30 daysDetailsClose

Delivery location***********Sri Ganganagar

Quantity
14 pieces
Delivery
30 days

Delivery location***********Bikaner

Quantity
28 pieces
Delivery
30 days

Specifications & requirements

Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Type 2 wall mounted combination tap assembly
Dimension
As per table 6 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Die cast brass
Material of inlet tubes
Brass tubes
Material of flanges
Forged brass
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Rolled brass rods
Material of circlip, wire locks
Phosphor bronze wire
Material of 'O' ring , gasket, and seat washer
Acrylonitrille butadiene rubber (ABR)
Material of Knob and knob components
Die cast brass
Aerating device fitted with tap
Yes
Flow straightening device fitted with tap
Yes
Warranty (in months)
12
Type of Fitting
CP Sink Mixture Wall Mounted with Flange
45Bathroom Water Shower (V2)Quantity48 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Quantity
12 pieces
Delivery
30 days

Delivery location***********Sri Ganganagar

Quantity
36 pieces
Delivery
30 days

Specifications & requirements

Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Type of shower
Overhead shower (Wall mount with shower arm)
Material of body/face plate
Stainless Steel
Finish of face plate
Chrome plated
Type of Water Flow
Only Rainfall
Type of Multiple flow
NA
Shape of Shower
Square
Size of Shower
150 mm
Overall length of Hand Shower (in mm)
NA
Length of Hand Shower Tube (in mt)
NA
Diameter of Hand Shower Tube (in mm)
NA
Material of Hand Shower Tube
NA
Overall length of Shower Arm (in mm)
200
Warranty (in Years)
2
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
46Bathroom Water Shower (V2)Quantity4 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Quantity
2 pieces
Delivery
30 days

Delivery location***********Bikaner

Quantity
2 pieces
Delivery
30 days

Specifications & requirements

Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Type of shower
Overhead shower (Wall mount with shower arm)
Material of body/face plate
Stainless Steel
Finish of face plate
Chrome plated
Type of Water Flow
Only Rainfall
Type of Multiple flow
NA
Shape of Shower
Square
Size of Shower
200mm
Overall length of Hand Shower (in mm)
NA
Length of Hand Shower Tube (in mt)
NA
Diameter of Hand Shower Tube (in mm)
NA
Material of Hand Shower Tube
NA
Overall length of Shower Arm (in mm)
300
Warranty (in Years)
2
47Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity6 piecesDelivery30 daysDetailsClose

Delivery location***********Sri Ganganagar

Delivery
30 days

Specifications & requirements

Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Type 3 wall mounted combination tap assembly
Dimension
As per table 6 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Cast brass
Material of inlet tubes
Brass tubes
Material of flanges
Stainless steel sheet
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Forged brass
Material of circlip, wire locks
Phosphor bronze sheet
Material of 'O' ring , gasket, and seat washer
Neoprene rubber
Material of Knob and knob components
Zinc base alloys
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Aerating device fitted with tap
Yes
Flow straightening device fitted with tap
Yes
Warranty (in months)
12
Type of Fitting
Chrome Plated Brass Wall Mixer 15 mm with 'L' Bend
48Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity50 piecesDeliverySee scheduleDetailsClose

Delivery location***********Bikaner

Quantity
2 pieces
Delivery
30 days

Delivery location***********Sri Ganganagar

Quantity
16 pieces
Delivery
030 days

Delivery location***********Bikaner

Quantity
32 pieces
Delivery
30 days

Specifications & requirements

Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Type 3 wall mounted combination tap assembly
Dimension
As per table 6 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Cast brass
Material of inlet tubes
Brass tubes
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Material of flanges
Stainless steel sheet
Material of diverter and
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Extruded brass rods
Material of circlip, wire locks
Phosphor bronze sheet
Material of 'O' ring , gasket, and seat washer
Synthetic rubber
Material of Knob and knob components
Die cast brass
Aerating device fitted with tap
Yes
Flow straightening device fitted with tap
Yes
Warranty (in months)
12
Type of Fitting
CP Brass Wall Mixer 15 mm 3 in 1 with arrangement telephonic shower
49Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity60 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Delivery
30 days

Specifications & requirements

Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Type 2 wall mounted combination tap assembly
Dimension
As per table 6 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Die cast brass
Material of inlet tubes
Brass tubes
Material of flanges
Forged brass
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Forged brass
Material of circlip, wire locks
Phosphor bronze sheet
Material of 'O' ring , gasket, and seat washer
Neoprene rubber
Material of Knob and knob components
Die cast brass
Aerating device fitted with tap
Yes
Flow straightening device fitted with tap
Yes
Warranty (in months)
12
Type of Fitting
Chrome Plated Brass Wall Mixer 15 mm Non Telephonic ISI Mark
50Waste Fittings For Washbasin And Sinks As Per IS 2963Quantity56 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Quantity
2 pieces
Delivery
30 days

Delivery location***********Sri Ganganagar

Quantity
22 pieces
Delivery
30 days

Delivery location***********Bikaner

Quantity
32 pieces
Delivery
30 days

Specifications & requirements

Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Material of Waste Fitting
Brass conforming to Grade 3 of IS 292/1961
Nominal Size
32 mm for washbasin
WARANTEE PERIOD IN NUMBER OF YEARS
3
51Waste Fittings For Washbasin And Sinks As Per IS 2963Quantity74 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Quantity
2 pieces
Delivery
30 days

Delivery location***********Sri Ganganagar

Quantity
26 pieces
Delivery
30 days

Delivery location***********Bikaner

Quantity
46 pieces
Delivery
30 days

Specifications & requirements

Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Material of Waste Fitting
Brass conforming to Grade 3 of IS 292/1961
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Nominal Size
50 mm for sink
WARANTEE PERIOD IN NUMBER OF YEARS
3
52Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity186 piecesDelivery30 daysDetailsClose

Delivery location***********Sri Ganganagar

Quantity
156 pieces
Delivery
30 days

Delivery location***********Bikaner

Quantity
30 pieces
Delivery
30 days

Specifications & requirements

Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Stop valve with external thread
Dimension
As per table 5 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Brass rods
Material of inlet tubes
Brass tubes
Material of flanges
Stainless steel sheet
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Forged brass
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Material of circlip, wire locks
Stainless steel
Material of 'O' ring , gasket, and seat washer
Synthetic rubber
Material of Knob and knob components
Zinc base alloys
Aerating device fitted with tap
No
Flow straightening device fitted with tap
No
Warranty (in months)
12
53Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity12 piecesDelivery30 daysDetailsClose

Delivery location***********Bikaner

Delivery
30 days

Specifications & requirements

Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Stop valve with internal thread
Dimension
As per table 5 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
20
Material of body, body components, nozzle , bonnet and back nuts
Die cast brass
Specification Name
बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Material of inlet tubes
Brass tubes
Material of flanges
Die cast brass
Material of diverter and
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Rolled brass rods
Material of circlip, wire locks
Phosphor bronze sheet
Material of 'O' ring , gasket, and seat washer
Synthetic rubber
Material of Knob and knob components
Cast brass
Aerating device fitted with tap
Yes
Flow straightening device fitted with tap
No
Warranty (in months)
6

Tender documents

Bid files and supporting documents, linked directly from GeM.

Policy & contract references

Documents you must submit

  • Experience Criteria
  • Past Performance
  • Bidder Turnover
  • OEM Authorization Certificate
  • OEM Annual Turnover
  • Compliance of BoQ specification and supporting document

Eligibility

Experience

3 years

Min. turnover

₹40 L

a year, 3-year average

OEM turnover

₹2 Cr

Past performance

50%

of the bid quantity

Experience & turnover exemptions

Micro & small enterprises (MSE)

Complete exemption
Exemption conditions

Yes | Complete

View PDF · p. 2

Startups

Partial exemption
Turnover required
20 (in lakhs)
Exemption conditions

Yes | Partial | Turn over value - 20 (in lakhs)

View PDF · p. 2

Exemptions depend on the evidence and conditions specified in the bid.

Preferences & relaxations

  • MSE purchase preference
  • MII preference
  • Class-1/2 local suppliers
  • EMD exemption: no
  • Inspection required: no

Check each criterion against the tender notice before you bid.

Commercial conditions

EMD
₹258,900
Performance guarantee
5% for 6 months
Offer validity
60 days

Buyer requirements & conditions

Buyer-added conditions from the bid document.

OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up to 25 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to increase the ordered quantity up to 25% of the contracted quantity during the currency of the contract at the contracted rates. The delivery period of quantity shall commence from the last date of original delivery order and in cases where option clause is exercised during the extended delivery period the additional time shall commence from the last date of extended delivery period. The additional delivery time shall be (Increased quantity ÷ Original quantity) × Original delivery period (in days), subject to minimum of 30 days. If the original delivery period is less than 30 days, the additional time equals the original delivery period. The Purchaser may extend this calculated delivery duration up to the original delivery period while exercising the option clause. Bidders must comply with these terms.

Bidder financial standing: The bidder should not be under liquidation, court receivership or similar proceedings, should not be bankrupt. Bidder to upload undertaking to this effect with bid.

  • 3.Turnover Bidder Turn Over Criteria: The minimum average annual financial turnover of the bidder during the last three years, ending on 31st March of the previous financial year, should be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant / Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution / incorporation of the bidder is less than 3 year old, the average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria.
  • 4.Turnover OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years, ending on 31st March of the previous financial year, should be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant / Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution / incorporation of the OEM is less than 3 year old, the average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. In case of bunch bids, the OEM of CATEGORY RELATED TO primary product having highest bid value should meet this criterion.
05

Buyer Added Bid Specific ATC

View PDF · p. 56

Buyer uploaded ATC document Click here to view the file.

06

Certificates

View PDF · p. 56

Bidder's offer is liable to be rejected if they don't upload any of the certificates / documents sought in the Bid document, ATC and Corrigendum if any.

Experience Criteria: The Bidder or its OEM {themselves or through reseller(s)} should have regularly, manufactured and supplied same or similar Category Products to any Central / State Govt Organization / PSU for 3 years before the bid opening date. Copies of relevant contracts to be submitted along with bid in support of having supplied some quantity during each of the year. In case of bunch bids, the primary product having highest value should meet this criterion.

Bidder shall submit the following documents along with their bid for Vendor Code Creation:

  • a.Copy of PAN Card.
  • b.Copy of GSTIN.
  • c.Copy of Cancelled Cheque.
  • d.Copy of EFT Mandate duly certified by Bank.

NON DISCLOSURE DECLARATION CERTIFICATE (On Bidder Letter Head) to be uploaded with bid:

  • 1.I M/s. M/s hereby declare that I shall not disclose the contract or any provision, specification, plan, design, pattern, sample or information thereof to any third party during and after expiry of Contract.
  • 2.If defying the norms as per the Contract a legal action may be taken against me as per the existing Rules.
10

Financial Criteria

View PDF · p. 57

NET WORTH: Net Worth of the OEM should be positive as per the last audited financial statement.

11

Scope of Supply

View PDF · p. 57

Scope of supply (Bid price to include all cost components) : Only supply of Goods

  • 12.Purchase Preference (Centre) Purchase Preference linked with Local Content (PP-LC) Policy: The bid clause regarding “Preference to Make In India products” stands modified in this bid and shall be governed by the PPLC Policy No. FP-20013/2/2017-FP-PNG dated 17.11.2020 issued by MoP&NG as amended up to date. Accordingly, bidders with Local Content less than or equal to 20% will be treated as “Non Local Supplier”. The prescribed LC shall be applicable on the date of Bid opening. Sanctions on the bidders for false / wrong declaration or not fulfilling the Local Content requirement shall be as per the PPLC policy. Further following additional provisions are added in the certification and verification of local content provision of the Preference to Make in India clause:
  • i.In case of foreign bidder, certificate from the statutory auditor or cost auditor of their own office or subsidiary in India giving the percentage of local content is also acceptable. In case office or subsidiary in India does not exist or Indian office/subsidiary is not required to appoint statutory auditor or cost auditor, certificate from practicing cost accountant or practicing chartered accountant giving the percentage of local content is also acceptable. ii. Along with Each Invoice: The local content certificate (issued by statutory auditor on behalf of procuring company) shall be submitted along with each invoice raised. However, the % of local content may vary with each invoice while maintaining the overall % of local content for the total work/purchase of the pro-rata local content requirement. In case, it is not satisfied cumulatively in the invoices raised up to that stage, the supplier shall indicate how the local content requirement would be met in the subsequent stages. iii. The bidder shall submit an undertaking from the authorized signatory of bidder having the Power of Attorney along with the bid stating the bidder meets the mandatory minimum LC requirement and such undertaking shall become a part of the contract.

Similar open tenders

Soonest first

Search similar in the explorerFind this tender in the explorer

Open on GeM