Dynamic Balancing Machine

Bidders are advised to check applicable GST on their own before quoting. Buyer will not take any responsibility in this regards. GST reimbursement will be as per actuals or as per applicable rates (whichever is lower), subject to the maximum of quoted GST %.

Bidder shall submit the following documents along with their bid for Vendor Code Creation:

• a.Copy of PAN Card.
• b.Copy of GSTIN.
• c.Copy of Cancelled Cheque.
• d.Copy of EFT Mandate duly certified by Bank.

Data Sheet of the product(s) offered in the bid, are to be uploaded along with the bid documents. Buyers can match and verify the Data Sheet with the product specifications offered. In case of any unexplained mismatch of technical parameters, the bid is liable for rejection.

Installation, Commissioning, Testing, Configuration, Training (if any - which ever is applicable as per scope of supply) is to be carried out by OEM / OEM Certified resource or OEM authorised Reseller.

Manufacturer Authorization:Wherever Authorised Distributors/service providers are submitting the bid, Authorisation Form /Certificate with OEM/Original Service Provider details such as name, designation, address, e-mail Id and Phone No. required to be furnished along with the bid

Malicious Code Certificate: The seller should upload following certificate in the bid:-

• (a)This is to certify that the Hardware and the Software being offered, as part of the contract, does not contain Embedded Malicious code that would activate procedures to :-
• (i)Inhibit the desires and designed function of the equipment.
• (ii)Cause physical damage to the user or equipment during the exploitation.
• (iii)Tap information resident or transient in the equipment/network.
• (b)The firm will be considered to be in breach of the procurement contract, in case physical damage, loss of information or infringements related to copyright and Intellectual Property Right (IPRs) are caused due to activation of any such malicious code in embedded software.

OPTIONAL SITE VISIT:

• 1.The Bidder is advised to visit and examine the installation site and its surroundings and obtain for itself on its own responsibility all information that may be necessary for preparing the Bid. The costs of visiting the site shall be borne by the Bidder. HAL WILL NOT BEAR ANY COST OF VISIT
• 2.The Bidder representative shall be allowed entry upon consignee premises for such visits, only upon the express conditions that the Bidder will release and indemnify the Buyer and Consignee against all liabilities arising out of such visit including death or injury, loss or damage to property, and any other loss, damage, costs, and expenses incurred as a result of such visit.
• 3.The Bidder shall not be entitled to hold any claim against Buyer for noncompliance due to lack of any kind of pre-requisite information as it is the sole responsibility of the Bidder to obtain all the necessary information with regard to site, surrounding, working conditions, weather etc. on its own before submission of the bid.

The successful bidder has to supply all essential accessories required for the successful installation and commissioning of the goods supplied. Besides standard accessories as per normal industry practice, following accessories must be part of supply and cost should be included in bid price: As pe RFQ. .

• 1.The Seller shall not assign the Contract in whole or part without obtaining the prior written consent of buyer.
• 2.The Seller shall not sub-contract the Contract in whole or part to any entity without obtaining the prior written consent of buyer.
• 3.The Seller shall, notwithstanding the consent and assignment/sub-contract, remain jointly and severally liable and responsible to buyer together with the assignee/ sub-contractor, for and in respect of the due performance of the Contract and the Sellers obligations there under.

Without prejudice to Buyer’s right to price adjustment by way of discount or any other right or remedy available to Buyer, Buyer may terminate the Contract or any part thereof by a written notice to the Seller, if:

• i)The Seller fails to comply with any material term of the Contract. ii) The Seller informs Buyer of its inability to deliver the Material(s) or any part thereof within the stipulated Delivery Period or such inability otherwise becomes apparent. iii) The Seller fails to deliver the Material(s) or any part thereof within the stipulated Delivery Period and/or to replace/rectify any rejected or defective Material(s) promptly. iv) The Seller becomes bankrupt or goes into liquidation.
• v)The Seller makes a general assignment for the benefit of creditors. vi) A receiver is appointed for any substantial property owned by the Seller. vii) The Seller has misrepresented to Buyer, acting on which misrepresentation Buyer has placed the Purchase Order on the Seller.

Scope of supply (Bid price to include all cost components) : Supply Installation Testing Commissioning of Goods and Training of operators and providing Statutory Clearances required (if any)

Dedicated /toll Free Telephone No. for Service Support : BIDDER/OEM must have Dedicated/toll Free Telephone No. for Service Support.

Warranty period of the supplied products shall be 1 years from the date of final acceptance of goods or after completion of installation, commissioning & testing of goods (if included in the scope of supply), at consignee location. OEM Warranty certificates must be submitted by Successful Bidder at the time of delivery of Goods. The seller should guarantee the rectification of goods in case of any break down during the guarantee period. Seller should have well established Installation, Commissioning, Training, Troubleshooting and Maintenance Service group in INDIA for attending the after sales service. Details of Service Centres near consignee destinations are to be uploaded along with the bid.

• 14.Ration Item ATCs Demurrage charges In case the rejected items are not lifted by the firm within 48 hrs, the demurrage charges at the rate of 0.5% of total contract value will be charged per day. In case the items are not lifted within a month, the same will be destroyed by the station board of officers and no claim will be admitted.Demurrage charges. In case the rejected items are not lifted by the firm within 48 hrs, the demurrage charges at the rate of 0.5% of total contract value will be charged per day. In case the items are not lifted within a month, the same will be destroyed by the station board of officers and no claim will be admitted.
• 15.Ration Item ATCs Packing Material The items will be supplied by the successful bidder in its original packing material and the packing material will not be returned. Weight of packing material will not be included in quantity supplied and only net weight of the items will be counted. The packing should be of standardized weights of appropriate size. Item will not be accepted in non-standardized weights.Packing Material. The items will be supplied by the successful bidder in its original packing material and the packing material will not be returned. Weight of packing material will not be included in quantity supplied and only net weight of the items will be counted. The packing should be of standardized weights of appropriate size. Item will not be accepted in non-standardized weights.
• 16.Purchase Preference (Centre) Purchase preference to Micro and Small Enterprises (MSEs): Purchase preference will be given to MSEs as defined in Public Procurement Policy for Micro and Small Enterprises (MSEs) Order, 2012 dated 23.03.2012 issued by Ministry of Micro, Small and Medium Enterprises and its subsequent Orders/Notifications issued by concerned Ministry. If the bidder wants to avail the Purchase preference, the bidder must be the manufacturer of the offered product in case of bid for supply of goods. Traders are excluded from the purview of Public Procurement Policy for Micro and Small Enterprises. In respect of bid for Services, the bidder must be the Service provider of the offered Service. Relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the offered product or service. If L-1 is not an MSE and MSE Seller (s) has/have quoted price within L-1+ 15% of margin of purchase preference /price band defined in relevant policy, such Seller shall be given opportunity to match L-1 price and contract will be awarded for percentage of 100% of total value.

Buyer Added text based ATC clauses Buyer Added text based ATC clauses: 1) Payment Terms: In the event of an order, 100% payment will be made within 30 days of recei pt, acceptance of Installation & Commissioning of item/s by RTGS or any other latest Electronic Pa yment remittance from HAL. 2) Installation & Commissioning (I&C): I&C of the item shall be completed within 15-30 days o f site readiness intimation from HAL. Total delay attributable to vendor beyond contractual delivery schedule will be subject to Liquidat ed damages as per contract terms. Any delay attributable to HAL shall be in HAL account and will not count in delivery schedule. 3) Supplier must provide the pre-requisite for readiness of site for installation within 7 days of rec eipt of contract on GeM portal. 4) The invoice on GeM portal should be uploaded only after acceptance of installation & Commissi oning of the item at HAL. 5) Local Content & GFR Border Sharing Declaration : Bidder must fill and submit the Local C ontent and GFR Border Sharing declaration document attached at ATC document. 6) Manufacturer certificate and COC for genuineness for supplied items are required along with t he supplies. 7) Bidder/Seller shall not submit any counter terms against the tender. In case even submitted, th en any counter terms shall not be considered and buyer at its own discretion may reject the offer or evaluate the offer with buyer's GeM Bid Terms and Conditions. 8) Prevention of Counterfeit Parts: The vendor shall plan, implement and control processes, a ppropriate to the organisation and the product for the prevention of counterfeit or suspect counter feit parts use and their inclusion in product(s) delivered to HAL. 9) Product Safety: The organization shall plan, implement, and control the processes needed to assure product safety during the entire product life cycle, as appropriate to the organization and t he product. 10) Business Conduct & Ethics: Supplier should be committed to conduct its business in accordance with the highest standard of business ethics and complying with applicable laws, rules & regulations. 11) HSN Code: Bidder Shall Submit HSN Code Against Each quoted Item. 12) Important Note: If bidders submit price bid/indicate pricing aspects in technical offer, their o ffer shall not be considered for evaluation and will be rejected. 13) Any request for extension of due date for submission of offer shall be received at our end at l east 03 days prior the bid closing date and time. However, extension of the due date is sole discre tion of HAL and may not be extended also. 14) Bidder (if authorized distributor) must be submitted Local Content Declaration from the OEM as per t he attached format in ATC. 15) HAL's GSTIN: Please submit GST bill with HAL GST NO. 09AAACH3641R1Z5 Note: This tender and subsequent order will be governed by terms and conditions of HAL Purcha se Manual. .

Buyer uploaded ATC document Click here to view the file.

OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up to 50 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to increase the ordered quantity up to 50% of the contracted quantity during the currency of the contract at the contracted rates. The delivery period of quantity shall commence from the last date of original delivery order and in cases where option clause is exercised during the extended delivery period the additional time shall commence from the last date of extended delivery period. The additional delivery time shall be (Increased quantity ÷ Original quantity) × Original delivery period (in days), subject to minimum of 30 days. If the original delivery period is less than 30 days, the additional time equals the original delivery period. The Purchaser may extend this calculated delivery duration up to the original delivery period while exercising the option clause. Bidders must comply with these terms.

Supplier shall ensure that the Invoice is raised in the name of Consignee with GSTIN of Consignee only.

While generating invoice in GeM portal, the seller must upload scanned copy of GST invoice and the screenshot of GST portal confirming payment of GST.

Escalation Matrix For Service Support : Bidder/OEM must provide Escalation Matrix of Telephone Numbers for Service Support.

The bidder is required to upload, along with the bid, all relevant certificates such as BIS licence, type test certificate, approval certificates and other certificates as prescribed in the Product Specification given in the bid document.