GeMOpenGoodsBid
Rotational Moulded Polyethylene Water Storage Tanks (V3) Conforming To IS 12701, Bathroom Or Toilet Mirror (V3), Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931, Towel Rail, PLASTIC BIB TAPS…
Indian Army
Ministry of Defence › Department of Military Affairs
Delivers to
Sirsa, Haryana
Overview
10 facts from the tenderMinistry of Defence published this goods tender on GeM on 14 Oct 2026, for Sirsa, Haryana. The EMD is ₹30,000. It closes on 24 Oct 2026, 5:00 pm IST. Bid number GEM/2026/B/8137452.
Timeline
- Published14 Oct 2026 · 4:45 pm
- Closesin 8d 21h24 Oct 2026 · 5:00 pm
- Reverse auctionIf the bid qualifies, after evaluation
Bidding
- Bid type
- Bid
- Evaluation method
- Total value wise evaluation
- Packet type
- Two Packet Bid
- Reverse auction
- Yes, 50% Lowest Priced Technically Qualified Bidders
- Total quantity
- 448
Buyer
- Created by
- CWEAFBUYER
- Location
- Sirsa · Haryana
- Portal
- GeM
Important dates
- Published
- 14 Oct 2026, 4:45 pm IST
- Closes
- 24 Oct 2026, 5:00 pm IST
Items & delivery
44 items · Address masked by GeM
Delivery location · all items
***********Sirsa
GeM masks the full address in this document.01Rotational Moulded Polyethylene Water Storage Tanks (V3) Conforming To IS 12701Quantity2 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Type (Based on Shape of Tank)
- Cylindrical Vertical Tank with Lid
- Layer of Tank
- Double Layered
- Minimum Net Capacity (In Liter)
- 500 Liter
02Rotational Moulded Polyethylene Water Storage Tanks (V3) Conforming To IS 12701Quantity4 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Type (Based on Shape of Tank)
- Cylindrical Vertical Tank with Lid
- Layer of Tank
- Double Layered
- Minimum Net Capacity (In Liter)
- 1000 Liter
03Bathroom Or Toilet Mirror (V3)Quantity9 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Type of Mirror
- Plain Mirror
- Mirror Shape
- Rectangular
- Type of Mirror Coating
- Silver Coated
- Frame
- With
- Frame Material
- Plastic
- Frame Color
- Cream
- Mirror Mounting/Fixing System
- Clamp Support
- Width/Diameter of Mirror (inch)
- >15 to ?20
- Height/Diameter of Mirror (inch)
- >20 to ?25
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Thickness of Mirror (mm)
- >3.5 to ?4
04Bathroom Or Toilet Mirror (V3)Quantity14 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Type of Mirror
- Plain Mirror
- Mirror Shape
- Rectangular
- Type of Mirror Coating
- Aluminium Coated
- Frame
- With
- Frame Material
- Plastic
- Frame Color
- White
- Mirror Mounting/Fixing System
- Wall Hanging System (Hook/Hanger)
- Width/Diameter of Mirror (inch)
- >15 to ?20
- Height/Diameter of Mirror (inch)
- >20 to ?25
- Thickness of Mirror (mm)
- >5 to ?7.5
05Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity9 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Angle stop valve
- Dimension
- As per table 5 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Material of body, body components, nozzle , bonnet and back nuts
- Die cast brass
- Material of inlet tubes
- Brass tubes
- Material of flanges
- Cast brass
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Forged brass
- Material of circlip, wire locks
- Phosphor bronze wire
- Material of 'O' ring , gasket, and seat washer
- Synthetic rubber
- Material of Knob and knob components
- Cast brass
- Aerating device fitted with tap
- No
- Flow straightening device fitted with tap
- No
- Warranty (in months)
- 24
06Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity26 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Type 1 Bib tap
- Dimension
- As per table 4 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Material of body, body components, nozzle , bonnet and back nuts
- Die cast brass
- Material of inlet tubes
- Copper tubes
- Material of flanges
- Die cast brass
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Rolled brass rods
- Material of circlip, wire locks
- Phosphor bronze wire
- Material of 'O' ring , gasket, and seat washer
- Neoprene rubber
- Material of Knob and knob components
- Die cast brass
- Aerating device fitted with tap
- Yes
- Flow straightening device fitted with tap
- No
- Warranty (in months)
- 6
07Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity20 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Pillar tap
- Dimension
- As per table 3 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Material of body, body components, nozzle , bonnet and back nuts
- Forged brass
- Material of inlet tubes
- Brass tubes
- Material of flanges
- Brass sheet
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Rolled brass rods
- Material of circlip, wire locks
- Phosphor bronze wire
- Material of 'O' ring , gasket, and seat washer
- Neoprene rubber
- Material of Knob and knob components
- Brass rods
- Aerating device fitted with tap
- Yes
- Flow straightening device fitted with tap
- Yes
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Warranty (in months)
- 12
08Towel RailQuantity36 piecesDelivery15 daysDetailsClose
- Delivery
- 15 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Rail Material
- Brass
- Mounting Bracket Material
- Stainless Steel (SS 304)
- Towel Rail Length (in mm) (Tolerance : ± 10 mm)
- 600 mm
- Rail Diameter/Thickness (in mm) (Tolerance : ± 10 mm)
- 19 mm
- Projection from Wall (in mm) (Tolerance : ± 10 mm)
- 60 mm
- Towel Rail Type
- Single Bar
- Bar Shape of Rail
- Flat
- Recommended Load Capacity (in kg)
- 3–6 kg
- Fixing Hardware Included
- No
- Fasteners Material
- Galvanized Steel
09Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity15 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Stop valve with internal thread
- Dimension
- As per table 5 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Material of body, body components, nozzle , bonnet and back nuts
- Cast brass
- Material of inlet tubes
- Brass tubes
- Material of flanges
- Cast brass
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Extruded brass rods
- Material of circlip, wire locks
- Phosphor bronze sheet
- Material of 'O' ring , gasket, and seat washer
- Synthetic rubber
- Material of Knob and knob components
- Cast brass
- Aerating device fitted with tap
- No
- Flow straightening device fitted with tap
- No
- Warranty (in months)
- 6
10PLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES Conforming To IS 9763Quantity13 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Conformity to IS 9763
- Yes
- Product Type
- Plastic Bib Tap
- Nominal Size (in mm)
- 15 mm (1/2")
- Hot/Cold Identification of Control Devices
- Blue Color or Letter C for Cold Water
- Material of Body of Tap/Valve
- PP Copolymer (conforming to IS 10910)
- Material of Bonnet of Tap/Valve
- PBT (conforming to IS 13193)
- Material of Spindle of Tap/Valve
- PP Copolymer (conforming to IS 10910)
- Material of Handle of Tap/Valve
- PBT (conforming to IS 13193)
- Material of Seal of Tap/Valve
- Rubber
- Dimensions (in mm)
- Bib Taps (As per Table 3 of IS 9763)
11Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity8 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Type 2 wall mounted combination tap assembly
- Dimension
- As per table 6 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Material of body, body components, nozzle , bonnet and back nuts
- Cast brass
- Material of inlet tubes
- Brass tubes
- Material of flanges
- Cast brass
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Rolled brass rods
- Material of circlip, wire locks
- Phosphor bronze sheet
- Material of 'O' ring , gasket, and seat washer
- Neoprene rubber
- Material of Knob and knob components
- Forged brass
- Aerating device fitted with tap
- No
- Flow straightening device fitted with tap
- No
- Warranty (in months)
- 6
12Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity11 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- One hole pillar mounted combination tap assembly
- Dimension
- As per table 7 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Material of body, body components, nozzle , bonnet and back nuts
- Cast brass
- Material of inlet tubes
- Brass tubes
- Material of flanges
- Cast brass
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Extruded brass rods
- Material of circlip, wire locks
- Phosphor bronze sheet
- Material of 'O' ring , gasket, and seat washer
- Neoprene rubber
- Material of Knob and knob components
- Cast brass
- Aerating device fitted with tap
- Yes
- Flow straightening device fitted with tap
- Yes
- Warranty (in months)
- 12
13Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity10 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Type 1 wall mounted combination tap assembly
- Dimension
- As per table 6 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Material of body, body components, nozzle , bonnet and back nuts
- Cast brass
- Material of inlet tubes
- Brass tubes
- Material of flanges
- Stainless steel sheet
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Extruded brass rods
- Material of circlip, wire locks
- Phosphor bronze wire
- Material of 'O' ring , gasket, and seat washer
- Synthetic butadiene rubber (SBR)
- Material of Knob and knob components
- Zinc base alloys
- Aerating device fitted with tap
- Yes
- Flow straightening device fitted with tap
- Yes
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Warranty (in months)
- 6
14Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity7 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Type 1 Bib tap
- Dimension
- As per table 4 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Material of body, body components, nozzle , bonnet and back nuts
- Die cast brass
- Material of inlet tubes
- Brass tubes
- Material of flanges
- Cast brass
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Rolled brass rods
- Material of circlip, wire locks
- Phosphor bronze sheet
- Material of 'O' ring , gasket, and seat washer
- Synthetic rubber
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Material of Knob and knob components
- Cast brass
- Aerating device fitted with tap
- Yes
- Flow straightening device fitted with tap
- No
- Warranty (in months)
- 12
15Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity2 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Type 2 Bib tap
- Dimension
- As per table 4 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Material of body, body components, nozzle , bonnet and back nuts
- Brass rods
- Material of inlet tubes
- Brass tubes
- Material of flanges
- Brass rods
- Material of diverter and diverter components
- NA
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Material of spindle, glands, washer plate, nuts, screw and pin
- Extruded brass rods
- Material of circlip, wire locks
- Phosphor bronze wire
- Material of 'O' ring , gasket, and seat washer
- Synthetic rubber
- Material of Knob and knob components
- Brass rods
- Aerating device fitted with tap
- No
- Flow straightening device fitted with tap
- No
- Warranty (in months)
- 24
16Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity4 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Type 1 Bib tap
- Dimension
- As per table 4 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Material of body, body components, nozzle ,
- Cast brass
- Material of inlet tubes
- Brass tubes
- Material of flanges
- Cast brass
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Rolled brass rods
- Material of circlip, wire locks
- Stainless steel
- Material of 'O' ring , gasket, and seat washer
- Acrylonitrille butadiene rubber (ABR)
- Material of Knob and knob components
- Cast brass
- Aerating device fitted with tap
- Yes
- Flow straightening device fitted with tap
- No
- Warranty (in months)
- 12
17Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity4 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Item
- Concealed stop valve
- Dimension
- As per table 5 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Material of body, body components, nozzle , bonnet and back nuts
- Cast brass
- Material of inlet tubes
- Brass tubes
- Material of flanges
- Brass sheet
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Rolled brass rods
- Material of circlip, wire locks
- Phosphor bronze wire
- Material of 'O' ring , gasket, and seat washer
- Synthetic rubber
- Material of Knob and knob components
- Cast brass
- Aerating device fitted with tap
- No
- Flow straightening device fitted with tap
- No
- Warranty (in months)
- 6
18Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity3 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Pillar tap
- Dimension
- As per table 3 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Material of body, body components, nozzle , bonnet and back nuts
- Cast brass
- Material of inlet tubes
- Brass tubes
- Material of flanges
- Stainless steel sheet
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Forged brass
- Material of circlip, wire locks
- Stainless steel
- Material of 'O' ring , gasket, and seat washer
- Synthetic rubber
- Material of Knob and knob components
- Zinc base alloys
- Aerating device fitted with tap
- No
- Flow straightening device fitted with tap
- Yes
- Warranty (in months)
- 12
19(Cमशः (ेणी 1 और (ेणी 2 के 'थानीय आपूित%कता% के iप मH अह%ता 8ाj करने के िलए आवNयक/Minimum 50% and 20% LocalQuantity2Delivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Stop valve with external thread
- Dimension
- As per table 5 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Material of body, body components, nozzle , bonnet and back nuts
- Brass rods
- Material of inlet tubes
- Brass tubes
- Material of flanges
- Cast brass
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Forged brass
- Material of circlip, wire locks
- Stainless steel
- Material of 'O' ring , gasket, and seat washer
- Synthetic rubber
- Material of Knob and knob components
- Zinc base alloys
- Aerating device fitted with tap
- No
- Flow straightening device fitted with tap
- No
- Warranty (in months)
- 6
20Towel RingQuantity15 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Ring Shape
- Circular
- Ring Material
- Brass
- Mounting Bracket Material
- Brass
- Inner Diameter of Ring (in mm) (Tolerance : ± 10 mm)
- 140 mm
- Ring Rod Thickness (in mm) (Tolerance : ± 10 mm)
- 6 mm
- Projection from Wall (in mm) (Tolerance : ± 10 mm)
- 50 mm
- Mounting Plate Size (in mm)
- 40 mm
- Ring Movement Type
- Swing Ring
- Recommended Load Capacity (in kg)
- Up to 2 kg
- Fixing Hardware Included
- Yes
- Fasteners Material
- Stainless Steel
21PLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES Conforming To IS 9763Quantity21 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Conformity to IS 9763
- Yes
- Product Type
- Plastic Bib Tap
- Nominal Size (in mm)
- 15 mm (1/2")
- Hot/Cold Identification of Control Devices
- Blue Color or Letter C for Cold Water
- Material of Body of Tap/Valve
- PP Copolymer (conforming to IS 10910)
- Material of Bonnet of Tap/Valve
- PP Copolymer (conforming to IS 10910)
- Material of Spindle of Tap/Valve
- Nylon 66 (conforming to 13464)
- Material of Handle of Tap/Valve
- PBT (conforming to IS 13193)
- Material of Seal of Tap/Valve
- Rubber
- Dimensions (in mm)
- Bib Taps (As per Table 3 of IS 9763)
22Metal Alloy Casting Water Tap With Aerator (V2)Quantity20 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Tap Mounting Type
- Ball tap
- Material
- Brass
- Type of Faucet
- Half Turn
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Aerator Material
- Metal
- Nominal Thread Size of Tap (mm)
- 20
23Health FaucetQuantity14 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Pressure rating (Bar)
- 1.5
- Flow Rate , Minimum (lpm)
- 8, 9, 10, 11 Or higher
- Material of construction
- Brass
- Hose Material
- Stainless Steel
- Hose length ( in meters)
- 1
- Handle Type
- Lever
- Anti bacterial coating
- No
24Ceramic ( Vitreous China ) Flushing Cisterns For Water Closets And Urinals Conforming To IS 774Quantity15 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Conformity to IS 774
- Yes
- Flushing Device
- Dual - Fresh Cistern
- Material for Flush Pipe
- Polyethylene Pipe (Conformity to Is 4984)
- Material for Overflow Pipe
- Polyethylene Pipe (Conformity to Is 4984)
- Cistern Discharge Capacity
- Full Flush (4.8 ± 0.5 liters) Reduced Flush (2.8 ± 0.5 liters)
25Plastic Seats And Covers For Water - Closets As Per IS 2548Quantity8 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Materials of Seat and Covers
- Polystyrene
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Materials of Hinging Device
- Mild Steel with Nickle Chromium Plating
- Seat
- Grade 1
- Cover
- Grade 1
26Metal Alloy Casting Water Tap With Aerator (V2)Quantity8 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Tap Mounting Type
- Disc tap
- Material
- Brass
- Type of Faucet
- Multi Turn
- Aerator Material
- Metal
- Nominal Thread Size of Tap (mm)
- 15
27Stainless Steel Shelf RackQuantity5 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Configuration
- With 4-Shelf (including top shelf)
- Shape of support structure
- Rectangular hollow type
- Ground clearance (mm)
- 25 mm
- Mode of supply
- Knocked Down To Be Assembled At Consignee Site By Consignee Himself
- Shelf material
- Stainless Steel Grade 202 galvanized
- Shelf material thickness
- 0.6 mm
- Support structure material
- Stainless Steel Grade 202 galvanized
- Support structure material thickness
- 0.6 mm
- Width of shelf rack ± 10 mm
- 915 mm
- Depth of shelf rack ± 10 mm
- 405 mm
- Height of shelf rack ± 10 mm
- 1220 mm
- Height of support structure ± 10 mm
- 1245 mm
- Size of support structure
- 30 mm x 30 mm
- Warranty period
- 1 - Year
- Test report to be furnished to buyer on demand
- No
28Stainless Steel Sinks For Domestic Purposes (V3) As Per IS 13983Quantity4 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Bis Required
- Yes
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Confirmity to standard IS 13983 and ISI Marked
- Yes
- Type of Bowl
- Rectangular
- Type of Sink built in counter shall be as per clause 4 Of IS 13983
- Single bowl single drainer- right or left hand
- Material used stainless steel of Grade Designation used as per clause 5 of IS 13983
- SS 304 Or higher
- Sinks shall be provided, in one of the following conditions as per clause 7.5 of IS 13983
- Without tap holes
- Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove confirmity to specification
- No
- Test Report to be furnished to the buyer on demand
- Yes
- Bis Required
- Yes
29Stainless Steel Sinks For Domestic Purposes (V3) As Per IS 13983Quantity2 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Confirmity to standard IS 13983 and ISI Marked
- Yes
- Type of Bowl
- Rectangular
- Type of Sink built in counter shall be as per clause 4 Of IS 13983
- Single bowl without drainer
- Material used stainless steel of Grade Designation used as per clause 5 of IS 13983
- SS 304 Or higher
- Sinks shall be provided, in one of the following conditions as per clause 7.5 of IS 13983
- Without tap holes
- Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove confirmity to specification
- Yes
- Test Report to be furnished to the buyer on demand
- No
30Bathroom Water Shower (V2)Quantity6 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Type of shower
- Overhead shower (Wall mount with shower arm)
- Material of body/face plate
- Brass
- Finish of face plate
- Chrome plated
- Type of Water Flow
- Rainfall and Multiple flow
- Type of Multiple flow
- Rainflow
- Shape of Shower
- Round
- Size of Shower
- 200mm
- Overall length of Hand Shower (in mm)
- NA
- Length of Hand Shower Tube (in mt)
- NA
- Diameter of Hand Shower Tube (in mm)
- NA
- Material of Hand Shower Tube
- NA
- Overall length of Shower Arm (in mm)
- 120
- Warranty (in Years)
- 1
31Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming To IS 778Quantity1 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Conformity to IS 778
- Yes
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- End Connection
- Screwed Ends
- Nominal Size of Valves (in mm)
- 20 mm
- Pressure Classification
- Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa
- Gate Valve Type
- Solid Wedge Type
- Bonnet Type/Design
- Screwed - in bonnet integral seats
- Material of Body
- Brass (conforming to DCB 2 of IS 1264)
- Material of Bonnet/Cover Material
- Brass (conforming to DCB 2 of IS 1264)
- Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable
- Extruded Brass Rod (conforming to Type 1 or Type 2 (Half Hard) of IS 319)
- Material of Stem, hinge pin and plug
- Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
- Material of Gland Packing
- Hemp and Jute (conforming to IS 5414)
- Minimum Length of Threaded Portion at the end (in mm)
- 10.5 mm
- Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)
- 4.1 mm
- Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)
- 13.0 mm
- Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)
- 9 mm
- Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)
- 32 mm
- End to End Dimensions of Screwed End Valves (in mm)
- As per Table 9 of IS 778
- Face to Face Dimensions of Flanged Valves (in mm)
- As per Table 11 of IS 778
32Metal Alloy Casting Water Tap With Aerator (V2)Quantity13 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Tap Mounting Type
- Disc tap
- Material
- Brass
- Type of Faucet
- Multi Turn
- Aerator Material
- Metal
- Nominal Thread Size of Tap (mm)
- 15
33Connector Pipes For Washbasins/ Sinks/ GeyserQuantity8 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Inner Pipe Material
- Silicone Rubber, PVC
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Cover Material
- PVC Outer Cover
- Nominal Bore Size (in mm)
- 10 mm
- End Connection Size (in inch)
- ½ inch,, ¾ inch, ? inch
- Pipe Length (Tolerance: ±10 mm)
- 600 mm
- End Connection Type (Material to be supplied alonwith)
- Nut–Nut
- End Fitting Material
- PTMT (Polytetra Methylene Terephthalate)
- Surface Finish
- None
- Washer/Gasket Included
- Yes
- Maximum Working Pressure (in bar)
- 10–20 bar
- Operating Temperature Range (in °C)
- Up to 40°C
- Durability Grade
- Medium Duty
34PLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES Conforming To IS 9763Quantity7 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Conformity to IS 9763
- Yes
- Product Type
- Stop Valve
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Nominal Size (in mm)
- 15 mm (1/2")
- Hot/Cold Identification of Control Devices
- Blue Color or Letter C for Cold Water
- Material of Body of Tap/Valve
- PP Copolymer (conforming to IS 10910)
- Material of Bonnet of Tap/Valve
- PP Copolymer (conforming to IS 10910)
- Material of Spindle of Tap/Valve
- PP Copolymer (conforming to IS 10910)
- Material of Handle of Tap/Valve
- PP Copolymer (conforming to IS 10910)
- Material of Seal of Tap/Valve
- Rubber
- Dimensions (in mm)
- Stop Valves (As per Table 5 of IS 9763)
35Waste Fittings For Washbasin And Sinks As Per IS 2963Quantity12 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Material of Waste Fitting
- Leaded Tin Bronze conforming to Grade 2 of IS 318/1962
- Nominal Size
- 32 mm for washbasin
- WARANTEE PERIOD IN NUMBER OF YEARS
- 2
36Flexible Drain Hoses For Wash Basins/ SinksQuantity17 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Installation Type
- Threaded
- Hose Material
- PVC
- Reinforcement Type
- Unreinforced
- Flexibility Type
- Smooth Bore
- Nominal Bore of Hose (in mm)
- 32 mm
- Hose Length in meter (Tolerance : ± 10 mm)
- 1 meter
- Wall Thickness (in mm)
- 1 mm
- Durability Grade
- Light Duty
- Connection Fitting Included
- Yes
- Type of Connection Fitting
- Coupling Nut with Washer
- Fitting Material
- PVC
- Washer/Gasket Material
- Rubber
37Floor Drain Traps (V2)Quantity6 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Material
- PVC
- Trap Seal Depth (in mm)
- 25 mm
- Removable Grating
- No
- Anti-Insect Feature
- No
- Anti-Odor Feature
- No
- Corrosion Resistance
- No
- Overall Size (Length x Breadth x Height) in mm
- 150 mm x 150 mm x 100 mm
- Flow Rate Capacity
- Medium Duty
38Flexible Drain Hoses For Wash Basins/ SinksQuantity10 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Installation Type
- Threaded
- Hose Material
- Polypropylene (PP)
- Reinforcement Type
- Wire Reinforced
- Flexibility Type
- Smooth Bore
- Nominal Bore of Hose (in mm)
- 50 mm
- Hose Length in meter (Tolerance : ± 10 mm)
- 1 meter
- Wall Thickness (in mm)
- 1 mm
- Durability Grade
- Medium Duty
- Connection Fitting Included
- No
- Type of Connection Fitting
- NA
- Fitting Material
- NA
- Washer/Gasket Material
- NA
39Bathroom Water Shower (V2)Quantity9 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Type of shower
- Overhead shower (Wall mount with shower arm)
- Material of body/face plate
- ABS
- Finish of face plate
- White matt
- Type of Water Flow
- Only Rainfall
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Type of Multiple flow
- NA
- Shape of Shower
- Round
- Size of Shower
- 80 mm
- Overall length of Hand Shower (in mm)
- NA
- Length of Hand Shower Tube (in mt)
- NA
- Diameter of Hand Shower Tube (in mm)
- NA
- Material of Hand Shower Tube
- NA
- Overall length of Shower Arm (in mm)
- 120
- Warranty (in Years)
- 1
40Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity7 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Stop valve with external thread
- Dimension
- As per table 5 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Material of body, body
- Cast brass
- Material of inlet tubes
- Brass tubes
- Material of flanges
- Stainless steel sheet
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Extruded brass rods
- Material of circlip, wire locks
- Phosphor bronze sheet
- Material of 'O' ring , gasket, and seat washer
- Synthetic rubber
- Material of Knob and knob components
- Cast brass
- Aerating device fitted with tap
- No
- Flow straightening device fitted with tap
- No
- Warranty (in months)
- 6
41PLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES Conforming To IS 9763Quantity18 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Conformity to IS 9763
- Yes
- Product Type
- Angle Valve
- Nominal Size (in mm)
- 15 mm (1/2")
- Hot/Cold Identification of Control Devices
- Blue Color or Letter C for Cold Water
- Material of Body of Tap/Valve
- PBT (conforming to IS 13193)
- Material of Bonnet of Tap/Valve
- PBT (conforming to IS 13193)
- Material of Spindle of Tap/Valve
- PBT (conforming to IS 13193)
- Material of Handle of Tap/Valve
- PBT (conforming to IS 13193)
- Material of Seal of Tap/Valve
- Rubber
- Dimensions (in mm)
- Angle Valves (As per Table 6 of IS 9763)
42Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity11 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Type 2 Bib tap
- Dimension
- As per table 4 of the governing specification
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Material of body, body components, nozzle , bonnet and back nuts
- Brass rods
- Material of inlet tubes
- Brass tubes
- Material of flanges
- Die cast brass
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Forged brass
- Material of circlip, wire locks
- Stainless steel
- Material of 'O' ring , gasket, and seat washer
- Neoprene rubber
- Material of Knob and knob components
- Cast brass
- Aerating device fitted with tap
- No
- Flow straightening device fitted with tap
- No
- Warranty (in months)
- 12
43PLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES Conforming To IS 9763Quantity8 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Conformity to IS 9763
- Yes
- Product Type
- Stop Valve
- Nominal Size (in mm)
- 15 mm (1/2")
- Hot/Cold Identification of Control Devices
- Blue Color or Letter C for Cold Water
- Material of Body of Tap/Valve
- PP Copolymer (conforming to IS 10910)
- Material of Bonnet of Tap/Valve
- PP Copolymer (conforming to IS 10910)
- Material of Spindle of Tap/Valve
- PBT (conforming to IS 13193)
- Material of Handle of Tap/Valve
- PP Copolymer (conforming to IS 10910)
- Material of Seal of Tap/Valve
- Rubber
- Dimensions (in mm)
- Stop Valves (As per Table 5 of IS 9763)
44Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity4 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Type 3 Bib tap
- Dimension
- As per table 4 of the governing specification
- Specification Name
- बड के िलए आवNयक अनुमत मूWय /Bid Requirement (Allowed Values)
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Material of body, body components, nozzle , bonnet and back nuts
- Cast brass
- Material of inlet tubes
- Brass tubes
- Material of flanges
- Stainless steel sheet
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Extruded brass rods
- Material of circlip, wire locks
- Phosphor bronze sheet
- Material of 'O' ring , gasket, and seat washer
- Synthetic rubber
- Material of Knob and knob components
- Zinc base alloys
- Aerating device fitted with tap
- Yes
- Flow straightening device fitted with tap
- Yes
- Warranty (in months)
- 12
No matching items. Try another name, code or schedule.
Tender documents
Bid files and supporting documents, linked directly from GeM.
- Bid documentOpen
Full bid details and conditions
- GeM category specificationOpen
Applies to item 1
- GeM category specificationOpen
Applies to item 2
- GeM category specificationOpen
Applies to item 3
- GeM category specificationOpen
Applies to item 4
- GeM category specificationOpen
Applies to item 5
- GeM category specificationOpen
Applies to item 6
- GeM category specificationOpen
Applies to item 7
- GeM category specificationOpen
Applies to item 8
- GeM category specificationOpen
Applies to item 9
- GeM category specificationOpen
Applies to item 10
- GeM category specificationOpen
Applies to item 11
- GeM category specificationOpen
Applies to item 12
- GeM category specificationOpen
Applies to item 13
- GeM category specificationOpen
Applies to item 14
- GeM category specificationOpen
Applies to item 15
- GeM category specificationOpen
Applies to item 16
- GeM category specificationOpen
Applies to item 17
- GeM category specificationOpen
Applies to item 18
- GeM category specificationOpen
Applies to item 19
- GeM category specificationOpen
Applies to item 20
- GeM category specificationOpen
Applies to item 21
- GeM category specificationOpen
Applies to item 22
- GeM category specificationOpen
Applies to item 23
- GeM category specificationOpen
Applies to item 24
- GeM category specificationOpen
Applies to item 25
- GeM category specificationOpen
Applies to item 26
- GeM category specificationOpen
Applies to item 27
- GeM category specificationOpen
Applies to item 28
- GeM category specificationOpen
Applies to item 29
- GeM category specificationOpen
Applies to item 30
- GeM category specificationOpen
Applies to item 31
- GeM category specificationOpen
Applies to item 32
- GeM category specificationOpen
Applies to item 33
- GeM category specificationOpen
Applies to item 34
- GeM category specificationOpen
Applies to item 35
- GeM category specificationOpen
Applies to item 36
- GeM category specificationOpen
Applies to item 37
- GeM category specificationOpen
Applies to item 38
- GeM category specificationOpen
Applies to item 39
- GeM category specificationOpen
Applies to item 40
- GeM category specificationOpen
Applies to item 41
- GeM category specificationOpen
Applies to item 42
- GeM category specificationOpen
Applies to item 43
- GeM category specificationOpen
Applies to item 44
Policy & contract references
Documents you must submit
- Experience Criteria
- Past Performance
- Bidder Turnover
- Certificate (Requested in ATC)
- OEM Authorization Certificate
- Additional Doc 1 (Requested in ATC)
Eligibility
Experience
3 years
Past performance
80%
of the bid quantity
Experience & turnover exemptions
Startups
No exemptionExemption conditions
Exemptions depend on the evidence and conditions specified in the bid.
Preferences & relaxations
- MSE purchase preference
- MII preference
- Class-1/2 local suppliers
- EMD exemption: no
- Inspection required: no
Check each criterion against the tender notice before you bid.
Commercial conditions
- EMD
- ₹30,000
- Performance guarantee
- Not required
- Offer validity
- 30 days
Buyer requirements & conditions
Buyer-added conditions from the bid document.
OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up to 25 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to increase the ordered quantity up to 25% of the contracted quantity during the currency of the contract at the contracted rates. The delivery period of quantity shall commence from the last date of original delivery order and in cases where option clause is exercised during the extended delivery period the additional time shall commence from the last date of extended delivery period. The additional delivery time shall be (Increased quantity ÷ Original quantity) × Original delivery period (in days), subject to minimum of 30 days. If the original delivery period is less than 30 days, the additional time equals the original delivery period. The Purchaser may extend this calculated delivery duration up to the original delivery period while exercising the option clause. Bidders must comply with these terms.
Bidder financial standing: The bidder should not be under liquidation, court receivership or similar proceedings, should not be bankrupt. Bidder to upload undertaking to this effect with bid.
Bidders are advised to check applicable GST on their own before quoting. Buyer will not take any responsibility in this regards. GST reimbursement will be as per actuals or as per applicable rates (whichever is lower), subject to the maximum of quoted GST %.
Bidder's offer is liable to be rejected if they don't upload any of the certificates / documents sought in the Bid document, ATC and Corrigendum if any.
ISO 9001: The bidder or the OEM of the offered products must have ISO 9001 certification.
Material Test Certificate Should Be Sent Along with The Supply. The Material Will Be Checked by Buyer’s Lab & the Results of the Lab will be the Sole Criteria for Acceptance of the Item.
The bidder is required to upload, along with the bid, all relevant certificates such as BIS licence, type test certificate, approval certificates and other certificates as prescribed in the Product Specification given in the bid document.
Buyer Added text based ATC clauses Additional Terms & Conditions (ATC) for Bid
- 1.Bidder will be disqualified if participation is done from the same IP address.
- 2.Bidder will be disqualified if the registered mobile number and address of two or more firms are found to be the same.
- 3.Bidder must upload OEM authorization certificate mentioning specific Bid No.
- 4.EMD must reach this office on or before opening of the bid, failing which the bidder will be disqualifie d from the bidding process.
- 5.All supplied items shall be new, unused, and of standard quality conforming to relevant BIS/ISI standa rds wherever applicable.
- 6.The make/brand offered shall be reputed and acceptable to the consignee.
- 7.Bidder should not be debarred/blacklisted by any Government Department/PSU/Autonomous Body at the time of participation in the bid.
- 8.Rates quoted by the bidder shall be inclusive of all taxes, duties, transportation, loading/unloading an d other incidental charges.
- 9.Material supplied must conform to the required specifications and standards mentioned in the bid doc ument. Substandard or rejected material shall be replaced by the supplier at their own cost.
- 10.Delivery of stores/items must be completed within the stipulated delivery period mentioned in the sup ply order, failing which action as deemed fit may be taken as per rules.
- 11.Payment shall be released only after satisfactory receipt, inspection and acceptance of the material b y the consignee/user department.
- 12.The purchaser reserves the right to cancel or reject any or all bids without assigning any reason there of.
- 13.If any information or document submitted by the bidder is found false, forged or misleading at any sta ge, the bid shall be rejected and EMD/Security Deposit may be forfeited.
- 14.Decision of the purchaser/competent authority regarding technical evaluation, acceptance or rejection of the bid shall be final and binding on all bidders.
- 15.Single bowl single drainer- right or left hand Stainless Steel Sinks Overall size 18x16x8 and bowl size 16x4x8 (in inches)
- 16.Single bowl without drainer Stainless Steel Sinks Overall size 37x18x8 and bowl size 16x4x8 (in inches) .
Similar open tenders
Soonest first- 1 dayleftMISCELLANEOUS BR ITEMSMinistry of Defence · Closes 17 Oct 2026
- 1 dayleftRotational Moulded Polyethylene Water Storage Tanks (V3) Conforming To IS 12701, (Vitreou…Ministry of Defence · Closes 17 Oct 2026
- 3 daysleftCopper Alloy Taps/Stop Valves (V2) Conforming To IS 8931, LED Luminaire For Road And Stre…Ministry of Defence · Closes 19 Oct 2026
- 3 daysleftBathroom Or Toilet Mirror (V3), Rotational Moulded Polyethylene Water Storage Tanks (V3)…Ministry of Defence · Closes 19 Oct 2026
- 4 daysleftCopper Alloy Taps/Stop Valves (V2) Conforming To IS 8931, Stainless Steel Sinks For Domes…Ministry of Defence · Closes 20 Oct 2026
- 4 daysleftNon Modular Piano Type Domestic Fan Regulator Conforming To IS 11037 (V2), XLPE Cable For…Ministry of Defence · Closes 20 Oct 2026
- 5 daysleftLED Garden Light (V2), LED Batten Light (LED Tube Light) (V2), LED Luminaire For Road And…Ministry of Defence · Closes 21 Oct 2026
- 7 daysleftPLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES C…Ministry of Defence · Closes 23 Oct 2026
Search similar in the explorerFind this tender in the explorer