BOQ1 BOQ1
Etenders Public Works Department
Public Works Department Punjab › Provincial Division Pwd B And R Branch Jal Cantt
Delivers to
Jalandhar, Punjab
Overview
10 facts from the tenderPublic Works Department Punjab published this goods tender on GeM on 9 Oct 2026, for Jalandhar, Punjab. The estimated value is ₹1.2 Cr and the EMD is ₹2.4 L. It closes on 24 Oct 2026, 7:00 pm IST. Bid number GEM/2026/B/8140680.
Timeline
- Published9 Oct 2026 · 6:13 pm
- Closesin 14d 4h24 Oct 2026 · 7:00 pm
- Reverse auctionIf the bid qualifies, after evaluation
Bidding
- Bid type
- Bid
- Evaluation method
- Item wise evaluation
- Packet type
- Two Packet Bid
- Reverse auction
- Yes, 50% Lowest Priced Technically Qualified Bidders
- Total quantity
- 4,391
Buyer
- Created by
- kumarjatinder
- Location
- Jalandhar · Punjab
- Portal
- GeM
Important dates
- Published
- 9 Oct 2026, 6:13 pm IST
- Closes
- 24 Oct 2026, 7:00 pm IST
Items & delivery
12 items · 1 delivery location
144005,Jalandhar Cantt
01Medical Equipment And Clinical InstrumentsQuantity94Delivery15 daysEMD₹5,552DetailsClose
- Delivery
- 15 days
Specifications & requirements
जीएसट पर इनपुट कर Pे+डट /ITC on GST · जीएसट उपकर कर Pे+डट /ITC on GST Cess · लागू आरसीएम/R CM Applicabl e · ?रवस % Fभार के अनुसार जीएसट/GST as per RCM · ?रवस % Fभार के अनुसार जीएसट उपकार 1 /GST Cess 1 as per RCM · GST Cess 2 as per RCM · वैक7^पक ?रवस% Fभार /Optional RCM
NA · NA · Yes · 18% · 1% · NA · No
02Medical Consumables And Patient CareQuantity155Delivery15 daysEMD₹1,260DetailsClose
- Delivery
- 15 days
Specifications & requirements
जीएसट पर इनपुट कर Pे+डट /ITC on GST · जीएसट उपकर कर Pे+डट /ITC on GST Cess · लागू आरसीएम/R CM Applicabl e · ?रवस % Fभार के अनुसार जीएसट/GST as per RCM · ?रवस % Fभार के अनुसार जीएसट उपकार 1 /GST Cess 1 as per RCM · GST Cess 2 as per RCM · वैक7^पक ?रवस% Fभार /Optional RCM
NA · NA · Yes · 18% · 1% · NA · No
03Beauty Salon And Personal CareQuantity1,146Delivery15 daysEMD₹1,796DetailsClose
- Delivery
- 15 days
Specifications & requirements
जीएसट पर इनपुट कर Pे+डट /ITC on GST · जीएसट उपकर कर Pे+डट /ITC on GST Cess · लागू आरसीएम/R CM Applicabl e · ?रवस % Fभार के अनुसार जीएसट/GST as per RCM · ?रवस % Fभार के अनुसार जीएसट उपकार 1 /GST Cess 1 as per RCM · GST Cess 2 as per RCM · वैक7^पक ?रवस% Fभार /Optional RCM
NA · NA · Yes · 18% · 1% · NA · No
04Electrical Tools Cables And TestingQuantity417Delivery15 daysEMD₹6,962DetailsClose
- Delivery
- 15 days
Specifications & requirements
जीएसट पर इनपुट कर Pे+डट /ITC on GST · जीएसट उपकर कर Pे+डट /ITC on GST Cess · लागू आरसीएम/R CM Applicabl e · ?रवस % Fभार के अनुसार जीएसट/GST as per RCM · ?रवस % Fभार के अनुसार जीएसट उपकार 1 /GST Cess 1 as per RCM · GST Cess 2 as per RCM · वैक7^पक ?रवस% Fभार /Optional RCM
NA · NA · Yes · 18% · 1% · NA · No
05Cnc Machining Tools And MetrologyQuantity55Delivery15 daysEMD₹63,854DetailsClose
- Delivery
- 15 days
Specifications & requirements
जीएसट पर इनपुट कर Pे+डट /ITC on GST · जीएसट उपकर कर Pे+डट /ITC on GST Cess · लागू आरसीएम/R CM Applicabl e · ?रवस % Fभार के अनुसार जीएसट/GST as per RCM · ?रवस % Fभार के अनुसार जीएसट उपकार 1 /GST Cess 1 as per RCM · GST Cess 2 as per RCM · वैक7^पक ?रवस% Fभार /Optional RCM
NA · NA · Yes · 18% · 1% · NA · No
06Welding Fabrication And WorkshopQuantity289Delivery15 daysEMD₹10,655DetailsClose
- Delivery
- 15 days
Specifications & requirements
जीएसट पर इनपुट कर Pे+डट /ITC on GST · जीएसट उपकर कर Pे+डट /ITC on GST Cess · लागू आरसीएम/R CM Applicabl e · ?रवस % Fभार के अनुसार जीएसट/GST as per RCM · ?रवस % Fभार के अनुसार जीएसट उपकार 1 /GST Cess 1 as per RCM · GST Cess 2 as per RCM · वैक7^पक ?रवस% Fभार /Optional RCM
NA · NA · Yes · 18% · 1% · NA · No
07Sewing Tailoring And Garment TrainingQuantity433Delivery15 daysEMD₹12,668DetailsClose
- Delivery
- 15 days
Specifications & requirements
जीएसट पर इनपुट कर Pे+डट /ITC on GST · जीएसट उपकर कर Pे+डट /ITC on GST Cess · लागू आरसीएम/R CM Applicabl e · ?रवस % Fभार के अनुसार जीएसट/GST as per RCM · ?रवस % Fभार के अनुसार जीएसट उपकार 1 /GST Cess 1 as per RCM · GST Cess 2 as per RCM · वैक7^पक ?रवस% Fभार /Optional RCM
NA · NA · Yes · 18% · 1% · NA · No
08Kitchen Bakery And Food ProductionQuantity360Delivery15 daysEMD₹4,458DetailsClose
- Delivery
- 15 days
Specifications & requirements
जीएसट पर इनपुट कर Pे+डट /ITC on GST · जीएसट उपकर कर Pे+डट /ITC on GST Cess · लागू आरसीएम/R CM Applicabl e · ?रवस % Fभार के अनुसार जीएसट/GST as per RCM · ?रवस % Fभार के अनुसार जीएसट उपकार 1 /GST Cess 1 as per RCM · GST Cess 2 as per RCM · वैक7^पक ?रवस% Fभार /Optional RCM
NA · NA · Yes · 18% · 1% · NA · No
09It Av Classroom And TrainingQuantity127Delivery15 daysEMD₹65,796DetailsClose
- Delivery
- 15 days
Specifications & requirements
जीएसट पर इनपुट कर Pे+डट /ITC on GST · जीएसट उपकर कर Pे+डट /ITC on GST Cess · लागू आरसीएम/R CM Applicabl e · ?रवस % Fभार के अनुसार जीएसट/GST as per RCM · ?रवस % Fभार के अनुसार जीएसट उपकार 1 /GST Cess 1 as per RCM · GST Cess 2 as per RCM · वैक7^पक ?रवस% Fभार /Optional RCM
NA · NA · Yes · 18% · 1% · NA · No
10Office Furniture And InstitutionalQuantity636Delivery15 daysEMD₹21,258DetailsClose
- Delivery
- 15 days
Specifications & requirements
जीएसट पर इनपुट कर Pे+डट /ITC on GST · जीएसट उपकर कर Pे+डट /ITC on GST Cess · लागू आरसीएम/R CM Applicabl e · ?रवस % Fभार के अनुसार जीएसट/GST as per RCM · ?रवस % Fभार के अनुसार जीएसट उपकार 1 /GST Cess 1 as per RCM · GST Cess 2 as per RCM · वैक7^पक ?रवस% Fभार /Optional RCM
NA · NA · Yes · 18% · 1% · NA · No
11Safety Ppe And Fire ProtectionQuantity559Delivery15 daysEMD₹2,487DetailsClose
- Delivery
- 15 days
Specifications & requirements
जीएसट पर इनपुट कर Pे+डट /ITC on GST · जीएसट उपकर कर Pे+डट /ITC on GST Cess · लागू आरसीएम/R CM Applicabl e · ?रवस % Fभार के अनुसार जीएसट/GST as per RCM · ?रवस % Fभार के अनुसार जीएसट उपकार 1 /GST Cess 1 as per RCM · GST Cess 2 as per RCM · वैक7^पक ?रवस% Fभार /Optional RCM
NA · NA · Yes · 18% · 1% · NA · No
12Housekeeping Hygiene Security And Facility UtilityQuantity120Delivery15 daysEMD₹39,913DetailsClose
- Delivery
- 15 days
Specifications & requirements
जीएसट पर इनपुट कर Pे+डट /ITC on GST · जीएसट उपकर कर Pे+डट /ITC on GST Cess · लागू आरसीएम/R CM Applicabl e · ?रवस % Fभार के अनुसार जीएसट/GST as per RCM · ?रवस % Fभार के अनुसार जीएसट उपकार 1 /GST Cess 1 as per RCM · GST Cess 2 as per RCM · वैक7^पक ?रवस% Fभार /Optional RCM
NA · NA · Yes · 18% · 1% · NA · No
No matching items. Try another name, code or schedule.
Tender documents
Bid files and supporting documents, linked directly from GeM.
- Bid documentOpen
Full bid details and conditions
- Specification DocumentOpen
Applies to items 1–12
- BOQ Detail DocumentOpen
Applies to items 1–12
Policy & contract references
Documents you must submit
- Experience Criteria
- Past Performance
- Bidder Turnover
- Certificate (Requested in ATC)
- OEM Annual Turnover
- Additional Doc 1 (Requested in ATC)
Eligibility
Experience
2 years
Min. turnover
₹59.2 L
a year, 3-year average
OEM turnover
₹1 Cr
Past performance
30%
of the bid quantity
Experience & turnover exemptions
Startups
No exemptionExemption conditions
Exemptions depend on the evidence and conditions specified in the bid.
Preferences & relaxations
- MSE purchase preference: no
- MII preference: no
- EMD exemption: no
- Inspection required: no
Check each criterion against the tender notice before you bid.
Commercial conditions
- EMD
- ₹236,659
- EMD schedules
- View EMD for 12 item schedules
- Performance guarantee
- Not required
- Offer validity
- 45 days
Payment terms
Payments shall be made to the Seller within 45 days of issue of consignee receipt-cum-acceptance certificate (CRAC) and on-line submission of bills (This is in supersession of 10 days time as provided in clause 12 of GeM GTC)
Buyer requirements & conditions
Buyer-added conditions from the bid document.
OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up to 25 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to increase the ordered quantity up to 25% of the contracted quantity during the currency of the contract at the contracted rates. The delivery period of quantity shall commence from the last date of original delivery order and in cases where option clause is exercised during the extended delivery period the additional time shall commence from the last date of extended delivery period. The additional delivery time shall be (Increased quantity ÷ Original quantity) × Original delivery period (in days), subject to minimum of 30 days. If the original delivery period is less than 30 days, the additional time equals the original delivery period. The Purchaser may extend this calculated delivery duration up to the original delivery period while exercising the option clause. Bidders must comply with these terms.
Bidder financial standing: The bidder should not be under liquidation, court receivership or similar proceedings, should not be bankrupt. Bidder to upload undertaking to this effect with bid.
Bidders are advised to check applicable GST on their own before quoting. Buyer will not take any responsibility in this regards. GST reimbursement will be as per actuals or as per applicable rates (whichever is lower), subject to the maximum of quoted GST %.
- 4.Purchase Preference (State) Bid reserved for MSE from the State of Bid Inviting Authority: Procurement under this bid is reserved for purchase from Micro and Small Enterprises from the State of Bid Inviting Authority having valid Udyam Registration and whose credentials are validated online through Udyam Registration portal. If the bidder wants to avail themselves of the reservation benefit, the bidder must be the manufacturer / OEM of the offered product on GeM. Traders are excluded from the purview of Public Procurement Policy for Micro and Small Enterprises and hence resellers offering products manufactured by some other OEM are not eligible to participate in this bid. In respect of bid for Services, the bidder must be the Service provider of the offered Service. Relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the offered product or service, and Buyer will decide eligibility based on documentary evidence submitted, while evaluating the bid. Benefits of MSE will be allowed only if seller is validated on-line in GeM profile as well as validated and approved by Buyer after evaluation of documents submitted.
Successful bidder will have to ensure that adequate number of dedicated technical service personals / engineers are designated / deployed for attending to the Service Request in a time bound manner and for ensuring Timely Servicing / rectification of defects during warranty period, as per Service level agreement indicated in the relevant clause of the bid.
- 6.Turnover Bidder Turn Over Criteria: The minimum average annual financial turnover of the bidder during the last three years, ending on 31st March of the previous financial year, should be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant / Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution / incorporation of the bidder is less than 3 year old, the average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria.
- 7.Turnover OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years, ending on 31st March of the previous financial year, should be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant / Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution / incorporation of the OEM is less than 3 year old, the average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. In case of bunch bids, the OEM of CATEGORY RELATED TO primary product having highest bid value should meet this criterion.
- 8.Past Project Experience Proof for Past Experience and Project Experience clause: For fulfilling the experience criteria any one of the following documents may be considered as valid proof for meeting the experience criteria:a. Contract copy along with Invoice(s) with self-certification by the bidder that service/supplies against the invoices have been executed.b. Execution certificate by client with contract value.c. Any other document in support of contract execution like Third Party Inspection release note, etc.Proof for Past Experience and Project Experience clause: For fulfilling the experience criteria any one of the following documents may be considered as valid proof for meeting the experience criteria:a. Contract copy along with Invoice(s) with self-certification by the bidder that service/supplies against the invoices have been executed.b. Execution certificate by client with contract value.c. Any other document in support of contract execution like Third Party Inspection release note, etc.
- 9.Past Project Experience The Bidder / OEM {themselves or through reseller(s)}, should have executed project for supply and installation / commissioning of same or similar Category Products during preceding 3 financial years (i.e. current year and three previous financial years) as on opening of bid, as per following criteria:
- (i)Single order of at least 35% of estimated bid value; or
- (ii)Two orders of at least 20% each of estimated bid value; or
- (iii)Three orders of at least 15% each of estimated bid value. Satisfactory Performance certificate issued by respective Buyer Organization for the above Orders should be uploaded with bid. In case of bunch bids, the Category related to primary product having highest bid value should meet this criterion
Buyer uploaded ATC document Click here to view the file.
Similar open tenders
Soonest first- TodayclosesSupply of Therapy Diagnostic Dental and Sensory Equipment with ConsumablesHealth and Family Welfare Department Jammu and Ka… · Closes 10 Oct 2026
- 6 daysleftGARMENT TOOLS EQUIPMENTLabour and Employment Department Gujarat · Closes 16 Oct 2026
- 10 daysleftTools Equipment for Electrical GroupLabour and Employment Department Gujarat · Closes 20 Oct 2026
- 12 daysleftTools and Equipment Sewing and Beauty BOQLabour and Employment Department Gujarat · Closes 22 Oct 2026
- 12 daysleftMechanical Tools Workshop Equipment and Measuring GaugesLabour and Employment Department Gujarat · Closes 22 Oct 2026
- 18 daysleftMECHANICAL TOOLS AND EQUIPMENTS AND MEASURING INSTRUMENTLabour and Employment Department Gujarat · Closes 29 Oct 2026
- 20 daysleftTool and EquipmentTechnical Education Department Chhattisgarh · Closes 31 Oct 2026
- 21 daysleftTool and EquipmentTechnical Education Department Chhattisgarh · Closes 31 Oct 2026
Search similar in the explorerFind this tender in the explorer