PROC OF MT SPARES

Bidders are advised to check applicable GST on their own before quoting. Buyer will not take any responsibility in this regards. GST reimbursement will be as per actuals or as per applicable rates (whichever is lower), subject to the maximum of quoted GST %.

Bidder shall submit the following documents along with their bid for Vendor Code Creation:

• a.Copy of PAN Card.
• b.Copy of GSTIN.
• c.Copy of Cancelled Cheque.
• d.Copy of EFT Mandate duly certified by Bank.

End User Certificate: Wherever Bidders are insisting for End User Certificate from the Buyer, same shall be provided in Buyer’s standard format only.

Experience Criteria: The Bidder or its OEM {themselves or through reseller(s)} should have regularly, manufactured and supplied same or similar Category Products to any Central / State Govt Organization / PSU for 3 years before the bid opening date. Copies of relevant contracts to be submitted along with bid in support of having supplied some quantity during each of the year. In case of bunch bids, the primary product having highest value should meet this criterion.

NON DISCLOSURE DECLARATION CERTIFICATE (On Bidder Letter Head) to be uploaded with bid:

• 1.I M/s. I MS hereby declare that I shall not disclose the contract or any provision, specification, plan, design, pattern, sample or information thereof to any third party during and after expiry of Contract.
• 2.If defying the norms as per the Contract a legal action may be taken against me as per the existing Rules.

OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up to 50 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to increase the ordered quantity up to 50% of the contracted quantity during the currency of the contract at the contracted rates. The delivery period of quantity shall commence from the last date of original delivery order and in cases where option clause is exercised during the extended delivery period the additional time shall commence from the last date of extended delivery period. The additional delivery time shall be (Increased quantity ÷ Original quantity) × Original delivery period (in days), subject to minimum of 30 days. If the original delivery period is less than 30 days, the additional time equals the original delivery period. The Purchaser may extend this calculated delivery duration up to the original delivery period while exercising the option clause. Bidders must comply with these terms.

Shelf Life: The Product/Spare parts to be supplied as part of the services must have minimum 03 YEARS Shelf Life. On the date of supply, minimum 03 YEARS usable shelf life should be available / balance.

While generating invoice in GeM portal, the seller must upload scanned copy of GST invoice and the screenshot of GST portal confirming payment of GST.

Nominated Inspection Agency: On behalf of the Buyer organization, any one of the following Inspection Agency would be conducting inspection of stores before acceptance: Pre-dispatch Inspection at Seller Premises (applicable only if pre-dispatch inspection clause has been selected in ATC): --------------------- Post Receipt Inspection at consignee site before acceptance of stores: BOARD OF OFFICERS AT BUYER PREMISES

Scope of supply (Bid price to include all cost components) : Only supply of Goods

Bidder's offer is liable to be rejected if they don't upload any of the certificates / documents sought in the Bid document, ATC and Corrigendum if any.

Buyer Added text based ATC clauses Liquidated Damages (LD). In the event of the Seller’s failure to supply the stores/ g oods/ any installment thereof or fails to perform services, conduct trials, installation of equipment, training and MET as per schedule specified in a contract, the CFA, with out prejudice to the rights of the purchaser to any other remedy for breach of contrac t, may recover from the contractor, a sum equivalent to 0.5% of the price {total cost (including elements of GST, freight/transportation and other variations like PVC/ERV etc.) of stores/incidental Works/Services, which the contractor has failed to deliver wit hin the period agreed for delivery in the contract, for each week or part thereof. The total damages shall not exceed 5% of the Price {total cost (including elements of GS T, freight/ transportation and other variations like PVC/ERV etc.) of stores/incidental Works/ Services. Any extension given by the buyer for delay attributable to buyer or on account of Force Majeure Clause is to be factored in delivery period.

• (a)In case of inordinate delay this maximum deduction shall be 10% of t he Price (total cost), as stated above, of stores/ incidental works/services suppl ied with delay.
• (b)Inordinate Delays: Inexcusable delays of more than one-fourth (25% ) of the total delivery period shall be treated as inordinate delays. “Bidders should note that in case any refund of GST is granted to them by Excise authorities in respect of Stores supplied under the Supply Or der, they will pass on the credit to the Buyer immediately along with a certificate that the credit so passed on related to the GST, originally p aid for the stores supplied under the Supply Order. In case of their fail ure to do so, within 10 days of the issue of the GST refund orders to th em by the Tax Authorities, the Buyer would be empowered to deduct a sum equivalent to the amount refunded by the Tax Authorities without any further reference to them from any of their outstanding bills again st the Supply Order or any other pending Government Supply Order an d that no disputes on this account would be raised by them”. Repeat Order. A Repeat Order of up to a maximum of 50% of the original orde red quantity against a previous order may be placed at the same cost and term s and conditions as per the original order/ contract with the approval by the CFA and concurrence of Integrated Finance, wherever required as per the delegation of financial powers. Repeat Order Clause may be exercised more tha n once, provided additional quantity ordered by exercising option clause and /or repeat order clause does not exceed 50% of the original order quantity. A CERTIFICATE REGARDING CORRECTNESS OF ALL DOCUMENTS BEING SUBMITTED IS REQUIRED TO BE FURNISHED BY FIRM Amendments :- No amendments will be encouraged involving financial implications or govt exchequer post placement of SO. Clarifications:- Any clarifications will be entertained only in the possible wi ndow available on GeM. Destructive sample/FOPM :- Any destructive sample or raw material will n ot form part of SO qty. It will be catered by the seller at their en .

Buyer uploaded ATC document Click here to view the file.

• 14.Turnover Bidder Turn Over Criteria: The minimum average annual financial turnover of the bidder during the last three years, ending on 31st March of the previous financial year, should be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant / Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution / incorporation of the bidder is less than 3 year old, the average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria.
• 15.Turnover OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years, ending on 31st March of the previous financial year, should be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant / Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution / incorporation of the OEM is less than 3 year old, the average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. In case of bunch bids, the OEM of CATEGORY RELATED TO primary product having highest bid value should meet this criterion.

Warranty period of the supplied products shall be 3 years from the date of final acceptance of goods or after completion of installation, commissioning & testing of goods (if included in the scope of supply), at consignee location. OEM Warranty certificates must be submitted by Successful Bidder at the time of delivery of Goods. The seller should guarantee the rectification of goods in case of any break down during the guarantee period. Seller should have well established Installation, Commissioning, Training, Troubleshooting and Maintenance Service group in INDIA for attending the after sales service. Details of Service Centres near consignee destinations are to be uploaded along with the bid.

Timely Servicing / rectification of defects during warranty period: After having been notified of the defects / service requirement during warranty period, Seller has to complete the required Service / Rectification within 15 days time limit. If the Seller fails to complete service / rectification with defined time limit, a penalty of 0.5% of Unit Price of the product shall be charged as penalty for each week of delay from the seller. Seller can deposit the penalty with the Buyer directly else the Buyer shall have a right to recover all such penalty amount from the Performance Security (PBG).Cumulative Penalty cannot exceed more than 10% of the total contract value after which the Buyer shall have the right to get the service / rectification done from alternate sources at the risk and cost of the Seller besides forfeiture of PBG. Seller shall be liable to re-imberse the cost of such service / rectification to the Buyer.

• 18.Ration Item ATCs Demurrage charges In case the rejected items are not lifted by the firm within 48 hrs, the demurrage charges at the rate of 0.5% of total contract value will be charged per day. In case the items are not lifted within a month, the same will be destroyed by the station board of officers and no claim will be admitted.Demurrage charges. In case the rejected items are not lifted by the firm within 48 hrs, the demurrage charges at the rate of 0.5% of total contract value will be charged per day. In case the items are not lifted within a month, the same will be destroyed by the station board of officers and no claim will be admitted.
• 19.Ration Item ATCs Packing Material The items will be supplied by the successful bidder in its original packing material and the packing material will not be returned. Weight of packing material will not be included in quantity supplied and only net weight of the items will be counted. The packing should be of standardized weights of appropriate size. Item will not be accepted in non-standardized weights.Packing Material. The items will be supplied by the successful bidder in its original packing material and the packing material will not be returned. Weight of packing material will not be included in quantity supplied and only net weight of the items will be counted. The packing should be of standardized weights of appropriate size. Item will not be accepted in non-standardized weights.