Galvanized Steel Chain Link Fence Fabric (V2) Conforming To IS 2721, Rigid GI Pipe (BHEL)

OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up to 25 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to increase the ordered quantity up to 25% of the contracted quantity during the currency of the contract at the contracted rates. The delivery period of quantity shall commence from the last date of original delivery order and in cases where option clause is exercised during the extended delivery period the additional time shall commence from the last date of extended delivery period. The additional delivery time shall be (Increased quantity ÷ Original quantity) × Original delivery period (in days), subject to minimum of 30 days. If the original delivery period is less than 30 days, the additional time equals the original delivery period. The Purchaser may extend this calculated delivery duration up to the original delivery period while exercising the option clause. Bidders must comply with these terms.

Bidder financial standing: The bidder should not be under liquidation, court receivership or similar proceedings, should not be bankrupt. Bidder to upload undertaking to this effect with bid.

Buyer Added text based ATC clauses Note : emd can be submitted in the form of DD OR Online O r Bank Guarantee At thime Of Sample Submisiion MSME Are Exempted From EMD List Of ITEM 9. सामbी का नाम
ववरण Unit 1 CHAINLINK FENCING Galvanized Steel Chain-link Fence Mesh Wire - Galvanized Steel Wire of 4.00 mm diameter Fabric Size -75X75 mm Height - 150 cm Line Wire -2 Numbers of Line Wires of 4.50mm Diameter Standard - C onfirming to IS-2721-2003 with up-to-da te amendments Certificate Compulsory Sq mtr 2 CHAINLINK FENCING Galvanized Steel Chain-link Fence Mesh Wire - Galvanized Steel Wire of 3.15mm diameter Fabric Size -75X75 mm Height - 150 cm Line Wire -2 Numbers of Line Wires of 4.00mm Diameter Standard - C onfirming to IS-2721-2003 with up-to-da te amendments Certificate Compulsory Sq mtr 3 ANGLE IRO N POLE Angle iron post of required size includin g bottom to be split and bent at right angl e in opposite direction for 10 cm length and drilling h oles up to 10 mm dia. (first hole will be at 3 feet heig ht starting from bottom then next will be at every 1 .5 feet last hole will be at 1 feet from top) etc. com plete. iron posts of 5000mm height size 40mm x40mmx5mm thick As Per I S-2062-2011 Bottom portion of pole to be split in Y sh ape and bent at 90 degrees The Angle Ir on Post Should Be Coated With 2 Layer Of Redoxide Primer And One Layer Of Oi l Paint Nos 4 ANGLE IRO N STRUT Angle iron strut of required size includin g bottom to be split and bent at right angl e in opposite direction for 10 cm length and drilling h oles up to 10 mm dia. (first hole will be at 1.5 feet hei ght starting from bottom then next will be at every 1 .5 feet last hole will be at 1 feet from top) etc. com plete. iron Strut of 2500mm height size 40mm x40mmx5mm thick As Per I S-2062-2011 Bottom portion of pole to be split in Y sh ape and bent at 90 degrees The Angle Ir on Post Should Be Coated With 2 Layer Of Redoxide Primer And One Layer Of Oi l Paint Nos 5 ANGLE IRO N POLE Angle iron post of required size includin g bottom to be split and bent at right angl e in opposite direction for 10 cm length and drilling h oles up to 10 mm dia. (first hole will be at 3 feet heig ht starting from bottom then next will be at every 1 .5 feet last hole will be at 1 Feet) etc. complete. iron posts of 5000 mm height size 45mm x45mmx5mm thick As Per A pplicable Grade IS-2062-2011 Bottom portion of pole to be split in Y sh ape and bent at 90 degrees The Angle Ir on Post Should Be Coated With 2 Layer Of Redoxide Primer And One Layer Of Oi l Paint Nos 6 ANGLE IRO N STRUT Angle iron Strut of required size including bottom to be split and bent at right angl e in opposite direction for 10 cm length and drilling h oles up to 10 mm dia. (first hole will be at 1.5 feet hei ght starting from bottom then next will be at every 1 .5 feet last hole will be at 1 Feet) etc. complete. iron Strut of 2500 mm height size 45mm x45mmx5mm thick As Per A pplicable Grade IS-2062-2011 Bottom portion of pole to be split in Y sh ape and bent at 90 degrees The Angle Ir on Post Should Be Coated With 2 Layer Of Redoxide Primer And One Layer Of Oi l Paint Nos Seller must submit documents as per attched ATC .

Buyer uploaded ATC document Click here to view the file.

Manufacturer Authorization:Wherever Authorised Distributors/service providers are submitting the bid, Authorisation Form /Certificate with OEM/Original Service Provider details such as name, designation, address, e-mail Id and Phone No. required to be furnished along with the bid

• 6.Rate Contract The Purchase orders placed through the rate of this bid shall be placed by . The order shall be placed by buyer separately based on the requirement.

Scope of supply (Bid price to include all cost components) : Only supply of Goods

• 8.Turnover Bidder Turn Over Criteria: The minimum average annual financial turnover of the bidder during the last three years, ending on 31st March of the previous financial year, should be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant / Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution / incorporation of the bidder is less than 3 year old, the average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria.

Availability of Service Centres: Bidder/OEM must have a Functional Service Centre in the State of each Consignee's Location in case of carry-in warranty. (Not applicable in case of goods having on-site warranty). If service center is not already there at the time of bidding, successful bidder / OEM shall have to establish one within 30 days of award of contract. Payment shall be released only after submission of documentary evidence of having Functional Service Centre.

Bidder's offer is liable to be rejected if they don't upload any of the certificates / documents sought in the Bid document, ATC and Corrigendum if any.

Material Test Certificate Should Be Sent Along with The Supply. The Material Will Be Checked by Buyer’s Lab & the Results of the Lab will be the Sole Criteria for Acceptance of the Item.

NET WORTH: Net Worth of the OEM should be positive as per the last audited financial statement.

• 13.Past Project Experience The Bidder / OEM {themselves or through reseller(s)}, should have executed project for supply and installation / commissioning of same or similar Category Products during preceding 3 financial years (i.e. current year and three previous financial years) as on opening of bid, as per following criteria:
• (i)Single order of at least 35% of estimated bid value; or
• (ii)Two orders of at least 20% each of estimated bid value; or
• (iii)Three orders of at least 15% each of estimated bid value. Satisfactory Performance certificate issued by respective Buyer Organization for the above Orders should be uploaded with bid. In case of bunch bids, the Category related to primary product having highest bid value should meet this criterion