DW Jute Tarpaulin Bags - National Seed Corporation

After award of contract – Successful Bidder shall have to get Detailed Design Drawings approved from buyer before starting fabrication. Successful Bidder shall submit Detailed Design Drawings for Buyer's approval, within 5 days of award of contract. Buyer shall, either approve the drawings or will provide complete list of modification required in the drawings within 10 days. Seller shall be required to ensure supply as per approved Drawings with modifications as communicated by Buyer. If there is delay from buyer side in approval of drawing– the delivery period shall be refixed without LD for the period of delay in approval of Drawing.

Bidders shall quote only those products (Part of Service delivery) in the bid which are not obsolete in the market and has at least 3 years residual market life i.e. the offered product shall not be declared end-of- life by the OEM before this period.

Experience Criteria: The Bidder or its OEM {themselves or through reseller(s)} should have regularly, manufactured and supplied same or similar Category Products to any Central / State Govt Organization / PSU for 3 years before the bid opening date. Copies of relevant contracts to be submitted along with bid in support of having supplied some quantity during each of the year. In case of bunch bids, the primary product having highest value should meet this criterion.

Manufacturer Authorization:Wherever Authorised Distributors/service providers are submitting the bid, Authorisation Form /Certificate with OEM/Original Service Provider details such as name, designation, address, e-mail Id and Phone No. required to be furnished along with the bid

OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up to 50 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to increase the ordered quantity up to 50% of the contracted quantity during the currency of the contract at the contracted rates. The delivery period of quantity shall commence from the last date of original delivery order and in cases where option clause is exercised during the extended delivery period the additional time shall commence from the last date of extended delivery period. The additional delivery time shall be (Increased quantity ÷ Original quantity) × Original delivery period (in days), subject to minimum of 30 days. If the original delivery period is less than 30 days, the additional time equals the original delivery period. The Purchaser may extend this calculated delivery duration up to the original delivery period while exercising the option clause. Bidders must comply with these terms.

Shelf Life: The Product/Spare parts to be supplied as part of the services must have minimum 4 YEARS Shelf Life. On the date of supply, minimum 3 YEARS usable shelf life should be available / balance.

The Buyer has an existing set up / inventory of similar products. The offered / supplied product must be compatible with existing system. The bidder has to ensure Compatibility of the supplied items or shall have to include in the supply the necessary hardware / software to make them compatible at no extra cost to the buyer. The details of items with which compatibility is required are as under: REPLACEMENT

• 8.Turnover Bidder Turn Over Criteria: The minimum average annual financial turnover of the bidder during the last three years, ending on 31st March of the previous financial year, should be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant / Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution / incorporation of the bidder is less than 3 year old, the average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria.

Availability of Service Centres: Bidder/OEM must have a Functional Service Centre in the State of each Consignee's Location in case of carry-in warranty. (Not applicable in case of goods having on-site warranty). If service center is not already there at the time of bidding, successful bidder / OEM shall have to establish one within 30 days of award of contract. Payment shall be released only after submission of documentary evidence of having Functional Service Centre.

Dedicated /toll Free Telephone No. for Service Support : BIDDER/OEM must have Dedicated/toll Free Telephone No. for Service Support.

Escalation Matrix For Service Support : Bidder/OEM must provide Escalation Matrix of Telephone Numbers for Service Support.

Bidder's offer is liable to be rejected if they don't upload any of the certificates / documents sought in the Bid document, ATC and Corrigendum if any.

ISO 9001: The bidder or the OEM of the offered products must have ISO 9001 certification.

Material Test Certificate Should Be Sent Along with The Supply. The Material Will Be Checked by Buyer’s Lab & the Results of the Lab will be the Sole Criteria for Acceptance of the Item.

The bidder is required to upload, along with the bid, all relevant certificates such as BIS licence, type test certificate, approval certificates and other certificates as prescribed in the Product Specification given in the bid document.

To be eligible for award of contract, Bidder / OEM must possess following Certificates / Test Reports on the date of bid opening (to be uploaded with bid): SO/NABL LESS THAN 60 DAYS OLD/ OEM AUTH/ TURNOVER DOCU WITH UDIN NUMBER/ THREE YEARS EXP ERIENCE CERTIFICATE / WARRANTY CERTIFICATE / PRODUCT SPECS BEING OFFERED .

Warranty period of the supplied products shall be 3 years from the date of final acceptance of goods or after completion of installation, commissioning & testing of goods (if included in the scope of supply), at consignee location. OEM Warranty certificates must be submitted by Successful Bidder at the time of delivery of Goods. The seller should guarantee the rectification of goods in case of any break down during the guarantee period. Seller should have well established Installation, Commissioning, Training, Troubleshooting and Maintenance Service group in INDIA for attending the after sales service. Details of Service Centres near consignee destinations are to be uploaded along with the bid.

• 18.Sample Clause After award of contract – Successful Bidder shall have to get advance sample approved from buyer before bulk manufacturing / starting bulk supplies. Successful Bidder shall submit 1 samples for Buyer's approval, within 5 days of award of contract. Buyer shall, as per contract specifications framework, either approve the advance sample or will provide complete list of modification required in the sample within 10 days of receipt of advance sample. Seller shall be required to ensure supply as per approved sample with modifications as communicated by Buyer. If there is delay from buyer side in approval of advance sample – the delivery period shall be refixed without LD for the period of delay in sample approval. In case, the sample is found to have major deviations / not conforming to the Contract specifications, the buyer at its discretion may call for fresh samples for approval before allowing bulk supplies or may terminate the contract after notifying the deviations to the seller. Unless otherwise provided in the contract, all samples required for test shall be supplied by the contractor free of cost. Where under the contract, the contractor is required to submit an advance sample, any expenses incurred by the contractor on or in connection with the production of stores in bulk, before the sample has been approved unconditionally shall be borne by the Seller and he shall not claim any compensation in the event of such sample being found unacceptable by the Buyer / Consignee.
• 19.Past Project Experience Proof for Past Experience and Project Experience clause: For fulfilling the experience criteria any one of the following documents may be considered as valid proof for meeting the experience criteria:a. Contract copy along with Invoice(s) with self-certification by the bidder that service/supplies against the invoices have been executed.b. Execution certificate by client with contract value.c. Any other document in support of contract execution like Third Party Inspection release note, etc.Proof for Past Experience and Project Experience clause: For fulfilling the experience criteria any one of the following documents may be considered as valid proof for meeting the experience criteria:a. Contract copy along with Invoice(s) with self-certification by the bidder that service/supplies against the invoices have been executed.b. Execution certificate by client with contract value.c. Any other document in support of contract execution like Third Party Inspection release note, etc.

Bidders can also submit the EMD with Account Payee Demand Draft in favour of CO DOU payable at SBI . Bidder has to upload scanned copy / proof of the DD along with bid and has to ensure delivery of hardcopy to the Buyer within 5 days of Bid End date / Bid Opening date.

Successful Bidder can submit the Performance Security in the form of Account Payee Demand Draft also (besides PBG which is allowed as per GeM GTC). DD should be made in favour of CO DOU payable at SBI . After award of contract, Successful Bidder can upload scanned copy of the DD in place of PBG and has to ensure delivery of hard copy to the original DD to the Buyer within 15 days of award of contract.

• 22.Ration Item ATCs Demurrage charges In case the rejected items are not lifted by the firm within 48 hrs, the demurrage charges at the rate of 0.5% of total contract value will be charged per day. In case the items are not lifted within a month, the same will be destroyed by the station board of officers and no claim will be admitted.Demurrage charges. In case the rejected items are not lifted by the firm within 48 hrs, the demurrage charges at the rate of 0.5% of total contract value will be charged per day. In case the items are not lifted within a month, the same will be destroyed by the station board of officers and no claim will be admitted.
• 23.Ration Item ATCs Inspection and Quality Check of Goods (Analysis, Verdict and appeal) Samples drawn by the inspecting officer at the time of inspection are known as Acceptance samples. Verdict shall be issued by CFL concerned on the basis of analysis of Original Sample. No additional time for tendering of stocks shall be given to the suppliers in case of rejection of stocks by CFL and verdict is issued after DP / Extended DP.
• (a). In the case of rejection of stores by the Inspecting Officer the SELLER will be at liberty to prefer an appeal and forward for examination his sample (Sample No.2) within fourteen days from the date of issue of verdict by CFL concerned rejecting the consignment for test to ST-7/8, DGST, QMG’s Branch, IHQ of MoD (Army), P-11 Havlock Lines, Lucknow Road, Timarpur, Delhi -110054 in duplicate under advice to the BUYER and the Composite Food Laboratory concerned. Failing which, the appeal will not be entertained and the consignment will be deemed to have been rejected finally.
• (b). Appeal sample will be preferred by the vendor at own risk and cost. No additional time will be offered or granted to the vendor to offset delays occurred in normal course for conduct of Appeal Board and no representation on ibid account will be accepted/ considered.
• 24.Ration Item ATCs Packing Material The items will be supplied by the successful bidder in its original packing material and the packing material will not be returned. Weight of packing material will not be included in quantity supplied and only net weight of the items will be counted. The packing should be of standardized weights of appropriate size. Item will not be accepted in non-standardized weights.Packing Material. The items will be supplied by the successful bidder in its original packing material and the packing material will not be returned. Weight of packing material will not be included in quantity supplied and only net weight of the items will be counted. The packing should be of standardized weights of appropriate size. Item will not be accepted in non-standardized weights.

Buyer Added text based ATC clauses

• 1.EMD WILL BE SUBMITTED BY ALL OTHER THAN EXEMPTED CATEGORIES. BIDDERS TO SUBMIT THE SOFT COPY OF EMD ALONGWITH BID DOCUMENT. PHYSICAL COPY OF EMD SHOULD REACH THE DEPOT WITHIN 0 9 DAYS OF BID PUBLICATION. OTHERWISE THE BID WILL BE TERMINATED AT TEC STAGE.
• 2.ANY BIDDER F OUND USING THREATENING, INTIMIDATING, ABUSIVE OR INAPPROPRIATE LANGUAGE WIL L BE SUBJECT TO APPROPRIATE ACTION INCL SUSPENSION BY GEM. THE RESPONSIBILITY OF SUBMITTING A LL REQUISITE D OCUMENTS LIES WITH BIDDER ONLY. BIDDER FAILING TO SUBMIT THE SAME WILL BE DIS QU ALIFIED
• 3.TH E PAST PERFORMANCE AND EXPERIENCE WILL BE CALCULATED ITEM WISE.
• 4.OEM AND BIDDER TURNOVE R DOCUMENT SHOULD HAVE VALID UDIN NUMBER WHICH WILL BE CHECKE D ON ICAS WEBSITE
• 5.BIDDERS ARE REQUESTED NOT TO SUBMIT EXTRA DOCUMENTS. 6. ONE SAMPLE OF EACH ITEM WILL BE ASKED FROM L1. SO WILL BE PLACED ONLY IF THE SAMPLE IS APPR OVED. IF SAMPLE IS NOT APPROVED S O WILL NOT BE PLACED AND BID WILL BE CANCELLED .

Buyer uploaded ATC document Click here to view the file.