ORD ITEMS
Indian Army
Ministry of Defence › Department of Military Affairs
Delivers to
Meerut, Uttar Pradesh
Overview
10 facts from the tenderMinistry of Defence published this goods tender on GeM on 15 Oct 2026, for Meerut, Uttar Pradesh. No EMD is required. It closes on 26 Oct 2026, 9:00 am IST. Bid number GEM/2026/B/8168143.
Timeline
- Published15 Oct 2026 · 6:14 pm
- Closesin 10d 4h26 Oct 2026 · 9:00 am
Bidding
- Bid type
- Bid
- Evaluation method
- Total value wise evaluation
- Packet type
- Two Packet Bid
- Reverse auction
- No
- Total quantity
- 24
Buyer
- Created by
- Admoffr@828fwc
- Location
- Meerut · Uttar Pradesh
- Portal
- GeM
Important dates
- Published
- 15 Oct 2026, 6:14 pm IST
- Closes
- 26 Oct 2026, 9:00 am IST
Items & delivery
20 items · Address masked by GeM
***********Meerut
GeM masks the full address in this document.01INJECTOR ASSYQuantity1Delivery180 daysDetailsClose
- Delivery
- 180 days
02SET BIG AND BEARING STDQuantity1Delivery180 daysDetailsClose
- Delivery
- 180 days
03FUEL FILTER ELEMENTQuantity1Delivery180 daysDetailsClose
- Delivery
- 180 days
04GASKET CYLINDER HEAD ID 84 MM OD 99MM ZERO POINT 4Quantity1Delivery180 daysDetailsClose
- Delivery
- 180 days
05PIPE NOZZLE LEAK OFFQuantity1Delivery180 daysDetailsClose
- Delivery
- 180 days
06FILTER ASSY LUB OILQuantity1Delivery180 daysDetailsClose
- Delivery
- 180 days
07RING SET PISTON ZERO POINT ZERO 2 OSQuantity1Delivery180 daysDetailsClose
- Delivery
- 180 days
08PLUNGERQuantity2Delivery180 daysDetailsClose
- Delivery
- 180 days
09PUMP ELEMENTQuantity1Delivery180 daysDetailsClose
- Delivery
- 180 days
10PIPE LUP OIL PRESSURE GUAGEQuantity1Delivery180 daysDetailsClose
- Delivery
- 180 days
11RUBBER COUPLINGQuantity1Delivery180 daysDetailsClose
- Delivery
- 180 days
12SOLENOID SWITCHQuantity1Delivery180 daysDetailsClose
- Delivery
- 180 days
13KRANK SHAFT SEALQuantity1Delivery180 daysDetailsClose
- Delivery
- 180 days
14AIR FILTER ELEMENTQuantity1Delivery180 daysDetailsClose
- Delivery
- 180 days
15COMPLETE GASKET SETQuantity1Delivery180 daysDetailsClose
- Delivery
- 180 days
16PUSH ROD SEALQuantity1Delivery180 daysDetailsClose
- Delivery
- 180 days
17HOURSE METER CABLEQuantity1Delivery180 daysDetailsClose
- Delivery
- 180 days
18DRIVE ASSYQuantity1Delivery180 daysDetailsClose
- Delivery
- 180 days
19BRUSH GEAR ASSYQuantity1Delivery180 daysDetailsClose
- Delivery
- 180 days
20MOUNTING PAD AVMQuantity4Delivery180 daysDetailsClose
- Delivery
- 180 days
No matching items. Try another name, code or schedule.
Tender documents
Bid files and supporting documents, linked directly from GeM.
- Bid documentOpen
Full bid details and conditions
- Specification DocumentOpen
Applies to items 1–20
- BOQ Detail DocumentOpen
Applies to items 1–20
Policy & contract references
Documents you must submit
- Experience Criteria
- Past Performance
- Bidder Turnover
- Certificate (Requested in ATC)
- Additional Doc 1 (Requested in ATC)
- Compliance of BoQ specification and supporting document
Eligibility
Past performance
50%
of the bid quantity
Experience & turnover exemptions
Startups
No exemptionExemption conditions
Exemptions depend on the evidence and conditions specified in the bid.
Preferences & relaxations
- MSE purchase preference
- EMD exemption
- MII preference: no
- Inspection required: no
Check each criterion against the tender notice before you bid.
Commercial conditions
- EMD
- Not required
- Performance guarantee
- Not required
- Offer validity
- 180 days
Buyer requirements & conditions
Buyer-added conditions from the bid document.
OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up to 25 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to increase the ordered quantity up to 25% of the contracted quantity during the currency of the contract at the contracted rates. The delivery period of quantity shall commence from the last date of original delivery order and in cases where option clause is exercised during the extended delivery period the additional time shall commence from the last date of extended delivery period. The additional delivery time shall be (Increased quantity ÷ Original quantity) × Original delivery period (in days), subject to minimum of 30 days. If the original delivery period is less than 30 days, the additional time equals the original delivery period. The Purchaser may extend this calculated delivery duration up to the original delivery period while exercising the option clause. Bidders must comply with these terms.
NON DISCLOSURE DECLARATION CERTIFICATE (On Bidder Letter Head) to be uploaded with bid:
- 1.I M/s. NAME OF FIRM hereby declare that I shall not disclose the contract or any provision, specification, plan, design, pattern, sample or information thereof to any third party during and after expiry of Contract.
- 2.If defying the norms as per the Contract a legal action may be taken against me as per the existing Rules.
Inspection of Stores by Inspection Authority of buyer or their authorised Inspecting officers / empanelled inspection agency or their representatives An independent third party Professional Inspection Body can help buyer in mitigating buyer's risk with pre-dispatch/post-dispatch inspection in order to ensure that equipment, components , solutions and documentation conform to contractual requirements. If an institutional buyer like Defense , Railways and MHA etc desires to appoint / nominate their own inspection authority / empanelled inspection agency for inspection of stores to be supplied against the contract , buyer can select this clause indicating cost of inspection in term of percentage which is 0 %. As per the contractual provisions / law , the buyer has a right before payment or acceptance to inspect goods at any reasonable place as indicated in contract and time and in any reasonable manner. When the seller is required or authorized to send the goods to the buyer, the inspection may be after their arrival. Expenses of inspection should be borne by the buyer but may be recovered from the seller if the goods do not conform to contractual specification and are rejected. Initially seller may pay for inspection charges as applicable and get the same reimbursed from buyer if store complies to contractual specification etc , on production of payment receipt issued by inspection agency as applicable. Seller/OEM shall send a notice in writing / e-mail to the Inspecting officer / inspection agency specifying the place where inspection is offered and the Inspecting officer shall on receipt of such notice notify to the seller the date and time when the stores would be inspected. The seller shall, at his own expenses, afford to the Inspecting officer , all reasonable facilities and such accommodation as may be necessary for satisfying himself that the stores are being and or have been manufactured in accordance with the technical particulars governing the supply . The decision of the purchaser/inspection authority regarding acceptance / rejection of consignment shall be final and binding on the seller. The Seller shall provide, without any extra charge, all materials, tools, labour and assistance of every kind which the Inspecting officer may demand of him for any test, and examination, other than special or independent test, which he shall require to be made on the seller's premises and the seller shall bear and pay all costs attendant thereon. The seller shall also provide , and deliver for test, free of charge, at such place other than his premises as the Inspecting officer may specify such material or stores as he may require for tests for which seller does not have the facilities or for special/ independent tests. In the event of rejection of stores or any part thereof by the Inspecting officer basis testing outside owing to lack of test facility at sellers premises ,the seller shall, on demand, pay to the buyer the costs incurred in the inspection and/or test. Cost of test shall be assessed at the rate charged by the Laboratory to private persons for similar work. Inspector shall have the right to put all the stores or materials forming part of the same or any part thereof to such tests as he may like fit and proper as per QAP/governing specification . The seller shall not be entitled to object on any ground whatsoever to the method of testing adopted by the Inspecting officer .. Unless otherwise provided for in the contract, the quantity of the stores or materials expended in test will be borne by seller . Inspecting officer is the Final Authority to Certify Performance / accept the consignment . The Inspecting officer’s decision as regards the rejection shall be final and binding on the seller. The seller shall if so required at his own expense mark or permit the Inspecing officer to mark all the approved stores with a recognised Government or purchaser's mark.
Scope of supply (Bid price to include all cost components) : Only supply of Goods
Warranty period of the supplied products shall be 1 years from the date of final acceptance of goods or after completion of installation, commissioning & testing of goods (if included in the scope of supply), at consignee location. OEM Warranty certificates must be submitted by Successful Bidder at the time of delivery of Goods. The seller should guarantee the rectification of goods in case of any break down during the guarantee period. Seller should have well established Installation, Commissioning, Training, Troubleshooting and Maintenance Service group in INDIA for attending the after sales service. Details of Service Centres near consignee destinations are to be uploaded along with the bid.
Similar open tenders
Soonest first- 3 daysleftPiston AssyMinistry of Defence · Closes 19 Oct 2026
- 3 daysleftORD HEADMinistry of Defence · Closes 19 Oct 2026
- 8 daysleftGENERATOR SPARESMinistry of Defence · Closes 24 Oct 2026
- 8 daysleftPROCUREMENT OF 32 LINES OF DG SET SPARESMinistry of Defence · Closes 24 Oct 2026
- 8 daysleftPROCUREMENT OF 32 LINES OF DG SET SPARESMinistry of Defence · Closes 24 Oct 2026
- 10 daysleftMTA II Genr SpareMinistry of Defence · Closes 26 Oct 2026
- 10 daysleftPROCUREMENT OF 36 LINES OF DG SET SPARESMinistry of Defence · Closes 26 Oct 2026
- 15 daysleftHLA SCORPIO S 10Ministry of Home Affairs · Closes 31 Oct 2026
Search similar in the explorerFind this tender in the explorer