Browse all bids
GeMOpenGoodsReverse auction

X Ray Baggage Inspection System As Per MHA QR (V3)

Office Of Dg ( Ns & M)

Ministry of Defence › Department of Defence Research & Development

Delivers to

Hyderabad, Telangana

Overview

11 facts from the tender

Ministry of Defence published this goods tender on GeM on 9 Oct 2026, for Hyderabad, Telangana. The EMD is ₹2.4 L. It closes on 13 Oct 2026, 11:00 am IST. Bid number GEM/2026/R/748918.

From the bid document

TimelineBid → reverse auction

  1. Bid published5 Aug 2026
  2. Bid closed26 Aug 2026 · 10:00 am
  3. RA issued8 Oct 2026
  4. RA started9 Oct 2026 · 4:00 pm

Bidding

Bid type
Reverse auction
Evaluation method
Total value wise evaluation
Packet type
Two Packet Bid
Reverse auction
Yes, H1-Highest Priced Bid Elimination
Auction for bid
GEM/2026/B/7853672
Total quantity
4

Buyer

Created by
OIC_MMG2
Location
Hyderabad · Telangana
Portal
GeM

Important dates

Published
9 Oct 2026, 4:00 pm IST
Closes
13 Oct 2026, 11:00 am IST

Bid & reverse auction

This reverse auction is the price round of bid GEM/2026/B/7853672. GeM's auction document lists only the auction, so the items, delivery, eligibility and buyer terms below come from the bid document and are marked From the bid document.

Bid document (PDF) Reverse auction document (PDF)

Items & delivery

From the bid document

1 item · Address masked by GeM

Item 1

X Ray Baggage Inspection System As Per MHA QR (V3)

Quantity4 pieces
Delivery location

***********HYDERABAD

GeM masks the full address in this document.
Delivery
30 days
Specifications & requirements · 10
Specification Name
बड के िलए आवCयक अनुमत मूSय /Bid Requirement (Allowed Values)
Conformity to technical requirements
As per QR/specification for ' X-RAY BAGGAGE INSPECTION SYSTEM', approved by MHA vide letter No. F/No. W-42011(494)/QRs/CISF/ Tech/2008/MHA - Prov-I-1422 Dated 08th September, 2016. (Copy of QRs / TDs uploaded in GeM portal)
System Size
Small Size
Minimum Tunnel Width
60 cm (Small Size)
Minimum Tunnel Height
40 cm (Small Size)
Minimum Conveyor Capacity (in kg)
160 kg (Small Size)
Minimum Throughput Count (Bags per hour)
200
Minimum Thickness of Steel Penetration
35 mm
Compliance of Technical Specification
Detailed technical specification is attached as Annexure-I and technical evaluation of bids will be based on these specifications. Bidders are requested to comply with theses specifications and must submit compliance against each point.
Applicable Specification Document
View

6.सं./S.N o. · Document Title · Description · Qरवस %3भार के अनुसार जीएसट/Applicable i.r.o. Items

1 · Annexure-I View · As per Technical Specification · X Ray Baggage Inspection System As Per MHA QR (V3)(4)

2 · Annexure-II View · As per Scope of Supply · X Ray Baggage Inspection System As Per MHA QR (V3)(4)

3 · Annexure-III View · As per Acceptance Criteria · X Ray Baggage Inspection System As Per MHA QR (V3)(4)

4 · Annexure-IV View · As per Bidder Qualification Criteria · X Ray Baggage Inspection System As Per MHA QR (V3)(4)

5 · Appendix-A View · As per Appendix-A · X Ray Baggage Inspection System As Per MHA QR (V3)(4)

Tender documents

Bid files and supporting documents, linked directly from GeM.

Policy & contract references

Documents you must submit

  • Compliance of BoQ specification and supporting document

Eligibility

Experience & turnover exemptions

Micro & small enterprises (MSE)

Complete exemption
From the reverse auction
Exemption conditions

Yes | Complete

View PDF · p. 1

Startups

Complete exemption
From the reverse auction
Exemption conditions

Yes | Complete

View PDF · p. 1

Exemptions depend on the evidence and conditions specified in the bid.

Preferences & relaxations

From the bid document

  • MSE purchase preference
  • MII preference
  • Class-1/2 local suppliers
  • Inspection required
  • EMD exemption: no

Check each criterion against the tender notice before you bid.

Commercial conditions

From the bid document

EMD
₹236,000
Performance guarantee
5% for 15 months
Offer validity
90 days

Reverse auction extension

From the reverse auction

If any seller submits the offer price during last 15 minutes of RA end time, then RA will be automatically extended for next 15 minutes from the last participation time. There is no limit on such RA extension cycle.

View PDF · p. 1

Buyer requirements & conditions

Buyer-added conditions from the bid and the reverse-auction documents.

From the bid document

Bidder financial standing: The bidder should not be under liquidation, court receivership or similar proceedings, should not be bankrupt. Bidder to upload undertaking to this effect with bid.

Bidders shall quote only those products (Part of Service delivery) in the bid which are not obsolete in the market and has at least 7 years residual market life i.e. the offered product shall not be declared end-of- life by the OEM before this period.

Bidders are advised to check applicable GST on their own before quoting. Buyer will not take any responsibility in this regards. GST reimbursement will be as per actuals or as per applicable rates (whichever is lower), subject to the maximum of quoted GST %.

Bidder shall submit the following documents along with their bid for Vendor Code Creation:

  • a.Copy of PAN Card.
  • b.Copy of GSTIN.
  • c.Copy of Cancelled Cheque.
  • d.Copy of EFT Mandate duly certified by Bank.

Installation, Commissioning, Testing, Configuration, Training (if any - which ever is applicable as per scope of supply) is to be carried out by OEM / OEM Certified resource or OEM authorised Reseller.

OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up to 50 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to increase the ordered quantity up to 50% of the contracted quantity during the currency of the contract at the contracted rates. The delivery period of quantity shall commence from the last date of original delivery order and in cases where option clause is exercised during the extended delivery period the additional time shall commence from the last date of extended delivery period. The additional delivery time shall be (Increased quantity ÷ Original quantity) × Original delivery period (in days), subject to minimum of 30 days. If the original delivery period is less than 30 days, the additional time equals the original delivery period. The Purchaser may extend this calculated delivery duration up to the original delivery period while exercising the option clause. Bidders must comply with these terms.

Scope of supply includes Training: Number of employees to be trained 3 , Place for Training Security, DMRL, Kanchanbagh, Hyderabad - 500 058. and Duration of training 2 days.

08

Scope of Supply

View PDF · p. 8

Scope of supply (Bid price to include all cost components) : Supply Installation Testing Commissioning of Goods and Training of operators and providing Statutory Clearances required (if any)

09

Certificates

View PDF · p. 8

Bidder's offer is liable to be rejected if they don't upload any of the certificates / documents sought in the Bid document, ATC and Corrigendum if any.

10

Certificates

View PDF · p. 8

Material Test Certificate Should Be Sent Along with The Supply. The Material Will Be Checked by Buyer’s Lab & the Results of the Lab will be the Sole Criteria for Acceptance of the Item.

11

Certificates

View PDF · p. 8

The bidder is required to upload, along with the bid, all relevant certificates such as BIS licence, type test certificate, approval certificates and other certificates as prescribed in the Product Specification given in the bid document.

Warranty period of the supplied products shall be 1 years from the date of final acceptance of goods or after completion of installation, commissioning & testing of goods (if included in the scope of supply), at consignee location. OEM Warranty certificates must be submitted by Successful Bidder at the time of delivery of Goods. The seller should guarantee the rectification of goods in case of any break down during the guarantee period. Seller should have well established Installation, Commissioning, Training, Troubleshooting and Maintenance Service group in INDIA for attending the after sales service. Details of Service Centres near consignee destinations are to be uploaded along with the bid.

13

Forms of EMD and PBG

View PDF · p. 8

Bidders can also submit the EMD with Account Payee Demand Draft in favour of The Director, DMRL payable at Hyderabad . Bidder has to upload scanned copy / proof of the DD along with bid and has to ensure delivery of hardcopy to the Buyer within 5 days of Bid End date / Bid Opening date.

14

Forms of EMD and PBG

View PDF · p. 9

Successful Bidder can submit the Performance Security in the form of Account Payee Demand Draft also (besides PBG which is allowed as per GeM GTC). DD should be made in favour of The Director, DMRL payable at Hyderabad . After award of contract, Successful Bidder can upload scanned copy of the DD in place of PBG and has to ensure delivery of hard copy to the original DD to the Buyer within 15 days of award of contract.

15

Buyer Added Bid Specific ATC

View PDF · p. 9

Buyer Added text based ATC clauses

  • 1.Bidder may also upload scanned copy of valid vendor registration certificate issue d by any DRDO Laboratory in place of Bid Security document / EMD. .

From the reverse auction

Reverse auction — offer validity

View PDF · p. 1

Participation by the bidder in RA process would be considered as their consent for extension in offer validity by 30 days by the date of RA initiation.

Similar open tenders

Soonest first

Search similar in the explorerFind this tender in the explorer

Open on GeM