N6130-TV00036 HELO STARTING RECTIFIER FOR NOPV SHIPS, CABLES, TYPE TESTING, OBS NOT REQUIRED, B AND D SPARES NOT REQUIRED

After award of contract – Successful Bidder shall have to get Detailed Design Drawings approved from buyer before starting fabrication. Successful Bidder shall submit Detailed Design Drawings for Buyer's approval, within 21 days of award of contract. Buyer shall, either approve the drawings or will provide complete list of modification required in the drawings within 15 days. Seller shall be required to ensure supply as per approved Drawings with modifications as communicated by Buyer. If there is delay from buyer side in approval of drawing– the delivery period shall be refixed without LD for the period of delay in approval of Drawing.

Actual delivery (and Installation & Commissioning (if covered in scope of supply)) is to be done at following address CWH AT CONSIGNEE PREMISES MATERIAL ORGANISATION KANCHARAPALEM VISAKHAPATANAM, ANDHRA PRADESH -530008 .

Bidder financial standing: The bidder should not be under liquidation, court receivership or similar proceedings, should not be bankrupt. Bidder to upload undertaking to this effect with bid.

Bidders shall quote only those products (Part of Service delivery) in the bid which are not obsolete in the market and has at least 7 years residual market life i.e. the offered product shall not be declared end-of- life by the OEM before this period.

Bidders are advised to check applicable GST on their own before quoting. Buyer will not take any responsibility in this regards. GST reimbursement will be as per actuals or as per applicable rates (whichever is lower), subject to the maximum of quoted GST %.

End User Certificate: Wherever Bidders are insisting for End User Certificate from the Buyer, same shall be provided in Buyer’s standard format only.

Data Sheet of the product(s) offered in the bid, are to be uploaded along with the bid documents. Buyers can match and verify the Data Sheet with the product specifications offered. In case of any unexplained mismatch of technical parameters, the bid is liable for rejection.

Bidder shall submit the following documents along with their bid for Vendor Code Creation:

• a.Copy of PAN Card.
• b.Copy of GSTIN.
• c.Copy of Cancelled Cheque.
• d.Copy of EFT Mandate duly certified by Bank.

Installation, Commissioning, Testing, Configuration, Training (if any - which ever is applicable as per scope of supply) is to be carried out by OEM / OEM Certified resource or OEM authorised Reseller.

OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up to 50 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to increase the ordered quantity up to 50% of the contracted quantity during the currency of the contract at the contracted rates. The delivery period of quantity shall commence from the last date of original delivery order and in cases where option clause is exercised during the extended delivery period the additional time shall commence from the last date of extended delivery period. The additional delivery time shall be (Increased quantity ÷ Original quantity) × Original delivery period (in days), subject to minimum of 30 days. If the original delivery period is less than 30 days, the additional time equals the original delivery period. The Purchaser may extend this calculated delivery duration up to the original delivery period while exercising the option clause. Bidders must comply with these terms.

While generating invoice in GeM portal, the seller must upload scanned copy of GST invoice and the screenshot of GST portal confirming payment of GST.

Shelf Life: The Product/Spare parts to be supplied as part of the services must have minimum 12 MONTHS Shelf Life. On the date of supply, minimum 12 MONTHS usable shelf life should be available / balance.

The successful bidder has to supply all essential accessories required for the successful installation and commissioning of the goods supplied. Besides standard accessories as per normal industry practice, following accessories must be part of supply and cost should be included in bid price: AS PER BOQ RATES TO BE MENTIONED IN BOQ AND PRICE BREAK UP DETAILS ALSO PROVIDED BY THE FIR M .

Scope of supply (Bid price to include all cost components) : Supply Installation Testing Commissioning of Goods and Training of operators and providing Statutory Clearances required (if any)

IMPORTED PRODUCTS: In case of imported products, OEM or Authorized Seller of OEM should have a registered office in India to provide after sales service support in India. The certificate to this effect should be submitted.

Nominated Inspection Agency: On behalf of the Buyer organization, any one of the following Inspection Agency would be conducting inspection of stores before acceptance: Pre-dispatch Inspection at Seller Premises (applicable only if pre-dispatch inspection clause has been selected in ATC): ITEMS WILL BE INSPECTED BY CQAE AGAINST APPROVED DRAWINGS AND QAP Post Receipt Inspection at consignee site before acceptance of stores: AGAINST I -NOTES, PO COPY, TAX INVOICE, W/G CERTIFICATE AND PHYSICAL DAMAGE

Pre-dispatch inspection at Seller premises (Fee/Charges to be borne by the BUYER): Before dispatch, the goods will be inspected by Buyer / Consignee or their Authorized Representative or by Nominated External Inspection Agency (independently or jointly with Buyer or Consignee as decided by the Buyer) at Seller premises (or at designated place for inspection as declared / communicated by the seller) for their compliance to the contract specifications. Fee/Charges taken by the External inspection Agency and any external laboratories testing charges shall be borne by the Buyer. For in-house testing, the Sellers will provide necessary facilities free of cost. Seller shall notify the Buyer through e-mail about readiness of goods for pre-dispatch inspection and Buyer will notify the Seller about the Authorized Representative/ Nominated External Inspection Agency and the date for testing. The goods would be dispatched to consignee only after clearance in pre-dispatch inspection. Consignee's right of rejection as per GTC in respect of the goods finally received at his location shall in no way be limited or waived by reason of the goods having previously been inspected, tested and passed by Buyer/ Consignee or its Nominated External Inspection Agency prior to the goods' shipment. While bidding, the sellers should take into account 7 days for inspection from the date of email offering the goods for inspection. Any delay in inspection beyond 7 days shall be on the part of the buyer and shall be regularised without Liquidated Damages. When there is requirement of submission the advance sample, the seller shall inform the buyer promptly through emails about the date of submission of sample to the buyer nominated Inspection agency.

Successful bidder will have to ensure that adequate number of dedicated technical service personals / engineers are designated / deployed for attending to the Service Request in a time bound manner and for ensuring Timely Servicing / rectification of defects during warranty period, as per Service level agreement indicated in the relevant clause of the bid.

Warranty period of the supplied products shall be 1 years from the date of final acceptance of goods or after completion of installation, commissioning & testing of goods (if included in the scope of supply), at consignee location. OEM Warranty certificates must be submitted by Successful Bidder at the time of delivery of Goods. The seller should guarantee the rectification of goods in case of any break down during the guarantee period. Seller should have well established Installation, Commissioning, Training, Troubleshooting and Maintenance Service group in INDIA for attending the after sales service. Details of Service Centres near consignee destinations are to be uploaded along with the bid.

Timely Servicing / rectification of defects during warranty period: After having been notified of the defects / service requirement during warranty period, Seller has to complete the required Service / Rectification within 10 days time limit. If the Seller fails to complete service / rectification with defined time limit, a penalty of 0.5% of Unit Price of the product shall be charged as penalty for each week of delay from the seller. Seller can deposit the penalty with the Buyer directly else the Buyer shall have a right to recover all such penalty amount from the Performance Security (PBG).Cumulative Penalty cannot exceed more than 10% of the total contract value after which the Buyer shall have the right to get the service / rectification done from alternate sources at the risk and cost of the Seller besides forfeiture of PBG. Seller shall be liable to re-imberse the cost of such service / rectification to the Buyer.

Buyer uploaded ATC document Click here to view the file.

Buyer Added text based ATC clauses 1 PROCUREMENT OF HELO STARTING RECTIFIER 2 INDENT NO 26V61C912 3 PSPP-01 LOT 4 PBG – 05% 5 QUOTE VALIDITY – 180 6 DELIVERY PERIOD - 365 7 QUOTATION WILL BE ACCEPTED FROM VENDORS AS PER SOURCE OF SUPPLY FROM FOLLOWING NHQ APPROVED VENDORS. I M/s MARINE ELECTRICALS INDIA LTD, MUMBAI II M/s AUTO ELECTRONIC CONTROL, MUMBAI III M/s STATIC TRANSFORMERS PVT LTD, INDORE 8 INSPECTION AGAINST APPROVED DRAWINGS AND QAP 9 TOTAL ITEMS - 05 ITEMS ( MAIN EQUIPMENT -01 CABLES-01 TYPE TESTING CHARGES - 01 OBS NOT REQ UIRED 01 AND B AND D NOT REQUIRED 01 10 LIQUIDATED DAMAGES - AS PER PARA 6.15.2 OF DPM-25 11 MSE PREFERENCE- THE PUBLIC PROCUREMENT POLICY FOR MSEs MANDATE A CERTAIN PERCENTAGE O F PROCUREMENT FROM MSEs. THE ITEM IS NOT DIVISIBLE AND IF L1 IS NOT MSE FIRM AND L2(WHO IS AN MSE) MATCH THE L1 (NON MSE) PRICE ON GEM, THE ENTIRE ORDER AWARDED TO L2 (THE MSE BIDDER) .

Participation by the bidder in RA process would be considered as their consent for extension in offer validity by 30 days by the date of RA initiation.