eProcureOpenGoods

SET OF FLEXIBLE LEAD WIRES WITH NICKEL COATED ENAMELLED HIGH CONDUCTIVITY COPPER WIRES etc.

Ministry of Railways

Office of the Principal Chief Materials Manager, 5th Floor NAB South Eastern Railway, Garden Reach Kolkata

Delivers to

Kolkata, West Bengal

Overview

27 facts from the tender

Ministry of Railways published this goods tender on eProcure on 7 Oct 2026, for Kolkata, West Bengal. The EMD is ₹0 on the portal (any bid security is in the tender documents). It closes on 22 Oct 2026, 2:00 pm IST. Tender ID 107207639 · Ref 25263382.

Timeline

Published7 Oct 2026 · 7:36 pm
Closesin 6d 5h22 Oct 2026 · 2:00 pm

Bidding

Bid type: Open/Advertised
Contract type: Goods · Expenditure
Tender type: Open - Indigenous
Tendering section: 25
Bidding system: Single Packet
Evaluation: Itemwise/Consigneewise
Validity of offer: 90 days
Tender document cost: None
Ranking order: Lowest to Highest
Pre-bid meeting: None
Approved sources: Required · CLW
MSE reservation: Not reserved
Eligible supplier class: Not restricted to Class I
Class I local content: At least 50%
Class II local content: At least 20%
MSE purchase preference: 25% of the quantity, within 15% of the lowest price
F.O.R: Destination

Buyer

Inviting authority: STORES-PCMM/SOUTH EASTERN RLY
Organisation type: Central Govt. Ministry/Department
Product category: Railway related Products
Location: Kolkata, West Bengal · the inviting office's place
Portal: eProcure
Inspection agency: TPI Agency
Inviting officer: PCMMSTORES-PCMM/SOUTH EASTERN RLY

Important dates

Published: 7 Oct 2026, 7:36 pm IST
Bidding starts: 7 Oct 2026, 7:36 pm IST
Closes: 22 Oct 2026, 2:00 pm IST

Declarations by the buyer

The tenderers in their bid shall indicate the details of their GST Jurisdictional Assessing Officers (Designation, Address & email id). In case of a contract award, a copy of Purchase Order shall be immediately forwarded by Purchaser to the GST Jurisdictional assessing officer mentioned in Tenderer's bid
Complies with the Public Procurement (Make in India) Order 2017
The tender inviting authority confirms this tender does not violate the GFR rules on procurement through GeM
SMM/P/Loco ( PAWAN KUMAR )

Items & delivery

1 item · 1 delivery location

Delivery schedule

Applies to: For all items
Commencement: On or after
Completion: Within 3 Months thereafter
Rate of supply: FULL QUANTITY

Delivery location

Electric Loco Shed Stores/TATA, SER

Jharkhand

Item 1 PL 25947072

SET OF FLEXIBLE LEAD WIRES WITH NICKEL COATED ENAMELLED HIGH CONDUCTIVITY C OPPER WIRES, INSULATED WITH VARNISHED GLASS FABRIC TAPE WITH AN EXTERNAL BRAIDING GLAS S FIBRES IMPREGNATED WITH SILICON VARNISH WITH ADDL. COVERING OF FIRE RETARDANT SILICON ELESTOMER BY MULTIDIP OR BY EXTRUSION PROCESS. MAX. OVERALL DIA OF CONNECTING LEAD WIR E SHALL BE 1.0 MM MORE THAN AS SPECIFIED IN BS-6195/1969, TYPE-88 (TABLE-6), CATEGORY-C & D FOR 6 SQ. MM AND 10 SQ. MM SIZES RESPECTIVELY. THE CABLES SHALL WITHSTAND THE PROOF VOL TAGE TEST 6.0 KV (RMS) AND 15 KV (RMS) FOR ONE MINUTE DURATION FOR CATEGORY C & D RESPECTIVELY. THE LEAD WIRES SHALL BE SUITABLE FOR TEMPERATURE OF 10 DEG. C TO 180 DEG. C COMPRISING OF (1) 6 SQ. MM. LEAD (0.3 X 84 STRAND) = 200 METRES. (2) 10 SQ. MM. LEAD (0.4 X 80 STRAND) = 100 MTS.

Quantity5 Set

Warranty: 30 Months after the date of delivery
Stock category: Stock
Approving agency: CLW
Inspection agency: TPI Agency
Quantity tolerance (±): 5 %age
Item category: Normal
Permitted PO value variation: Max 8 lacs

UVAM item reference

( Item Id :- 2101054 - Connecting Lead for Auxiliary motors )

Documents

4 files

Documents to submit

Commercial-Compliance

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Document optional

Other Conditions

1. Earnest Money and Security Deposit are applicable as per para 5 and 6 of GCC attached with this Tender. Tenderer to read these clauses carefully, which have been amended recently.
2. Vendors appearing on the approved vendor lists of RDSO/PUs/CORE are exempted from the EMD/SD payment. However, Dealer/authorized agent of RDSO/PUs/CORE vendors, who participate against authorization of such approved vendor of RDSO/PUs/CORE are not exempted from the submission of the EMD/SD.
3. However, approved sources directly participating in the tender and stipulating in IREPS that the order be placed on authorized dealer, are to be considered as exempted from the EMD payment.
Document optional
MSEs who are interested in availing themselves of the MSE benefits (notified by the govt. of India and as stipulated in GCC of Supply Contracts Para 3.0 or any other paragraphs) will enclose with their offer the copy of UDYAM Registration Certificate ONLY. The MSE benefits shall not be granted based on any other document/certification as mentioned in the GCC enclosed.
Document optional
Firm should submit PERFORMANCE STATEMENT preferably as per PROFORMA in Annexure- 2 of GCC attached.
Document optional
Firm should mention detailed address of the place of inspection.
Document optional
Firm to mention HSN Code of the tendered item.
Document optional
Sharing of Land Border with India Clause Bidders are requested to go through Clause No. 32.0 (32.1 to 32.6) of SER Instruction to Tenderers and General Conditions. Bidders should confirm the following certificate for Compliance.
1. I have read the clause Sr. No. 32 of Instructions to tenderers and general conditions of tenders for supply contract attached with the tender regarding restrictions on procurement from a bidder of a country which shares a land border with India or bidder who has a specified Transfer of Technology (T.O.T) arrangement with an entity from a country which shares a land border with India and on sub- contracting to contractors from such countries.
2. I certify that this bidder is neither from such a country nor have a specified Transfer of Technology (T.O.T) arrangement with such an entity from a country which shares a land border with India and will not sub-contract any work to a contractor from such countries unless such contractor is registered with the Competent Authority. I also certify that this bidder will not offer any products/services of an entity from such countries unless such entity is registered with the Competent Authority.
3. I hereby certify that this bidder fulfils all requirements in this regard and is eligible to be considered.
4. I hereby acknowledge that in the event of acceptance of my bid on above certificate and if the certificate is found to be false at any stage, the false certificate would be a ground for immediate termination of contract and further legal action in accordance with the Law. (Bidders confirming this certificate for Compliance shall select Yes in the Complied column. However, in case you do not confirm above certificate for Compliance, select NO in complied column. In such cases you are required to submit the certificate for Compliance as per Annexure-8 Instructions to tenderers and general conditions of tenders for supply contract along-with their Bid/Offer.)
Document optional

Eligibility

Special Eligibility Criteria

Bulk/Full quantity of this tender is restricted to be procured from CLW approved sources only [CLW's Item I D : 2101054 Para No.2.5.1 of GCC attached to be referred for full details.
The Authorized dealer/agent of the approved vendors/OEM must upload tender specific authorization in proper format [preferably as per Annexure-4 of GCC attached], failing by which their offer will be summarily rejected.
Document optional
Public procurement (Preference to Make in India) is applicable as per para 29.0 (29.1 to 29.10) of GCC attached.

Check each criterion against the tender notice before you bid.

Commercial conditions

EMD: ₹0 on the portal — any bid security is in the tender documents
Tender fee: None

Terms & conditions

14 conditions

Payment Terms

As per Para 18.0 and sub-Paras therein of SER Instruction to Tenderers & General conditions of Tender.

Statutory Variation Clause

is applicable during the original Currency of Contract subject to production of documentary evidence as per para 8.1 of GCC attached.

Standard Governing Conditions

The contract shall be governed by the latest version [along with all correction slips] of IRS conditions of contract and all other terms and conditions incorporated in the tender documents (Attached herewith).
General Conditions of Contract The contract shall be governed by latest version (along with all correction slips) of General Conditions of Contract (Hereafter called GCC), all other terms and conditions incorporated in the tender documents (Attached herewith).

Commercial-Compliance

FOR Destination.
Bidders are reminded to carefully go through IRS Conditions of Contract (included and uploaded along with the bid document) particularly those pertaining to Code of Integrity, Misdemeanor and penal measures. If two or more bidders are found to be sister concerns or affiliates (having common partner/director/ promoter/owner/holding company decision control etc.) the offers of all such sister concerns are liable to be rejected as per relevant provisions of IRS terms and condition.

Other Conditions

Inspection by TPI
Railway reserves the right to cancel the PO/LOA and recover the amount 5% of the value of unsupplied quantity, as general damages, from this contract or any other contract of the firm; in case of failure of firm, in execution of contract.

Special Conditions

As time is the essence of contract, the tenderer are to note the delivery schedule given in the tender schedule and quote accordingly. Vague delivery period or a very high delivery period compared to Railways specific delivery period in the tender schedule may be considered commercially unresponsive and is liable to be ignored.
Guarantee/warranty clause will be as per governing specification. If guarantee/warranty is not mentioned in specification then it will be as per IRS terms and conditions i.e 30 months after date of delivery.

Show all 14

Delivery by Road is preferable.
1. The offers shall be evaluated based on the GST rate as quoted by each bidder and same will be used for determining the inter se ranking. While submitting offer, it shall be the responsibility of the bidder to ensure that they quote correct GST rate and HSN number.
2. Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST rate if quoted by the bidder.
3. Wherever the successful bidder invoices the goods at GST rate or HSN number which is different from the incorporated in the purchase order ; payment shall be made as per GST rate which is lower of the GST rate incorporated in the purchase order or billed.
4. Vender is informed that she/he would be required to adjust her/his basic price to the extent required by higher tax billed as per invoice to match the all inclusive price as mentioned in the purchase order.
5. Any amendment to GST rate or HSN number in the contract shall be as per the contractual conditions and statutory amendments in the quoted GST rate and HSN number, under SVC.
Bidders may please note that Entities of countries which have been identified by the Nodal Ministry/Department as not allowing Indian companies to participate in their Government procurement for any item related to that Ministry/Department shall not be allowed to participate in Government procurement in India for all items related to that nodal Ministry/Department, except for the list of items published by the Ministry/Department permitting their participation. The term entity of a country shall have the same meaning as in the FDI policy of DPIIT as amended from time to time.
Settlement of Disputes and conciliation of Disputes will be as per Annexure - A attached.

Bidder declarations (8)

Check List

1. Have you attached the past performance credentials with your offer?
2. Have you mentioned the complete address of the work premises of the OEM where Third Party Inspection (TPI) inspection will be carried out before dispatch of the material?
Have you quoted correct local content of your offered product?
Have you mentioned MAKE/BRAND of OEM?
Have you attached CA Certificate duly signed with UDIN for the Local Content claimed, if you claim to be a "Class I Local Supplier/Class II Local Supplier" ? (Applicable for bid value above/equal to Rs.10 Crores).
Have you attached UDYAM Certificate for MSE if you claimed MSE benefits?

Undertakings

I/ We agree to supply tendered stores in accordance with the IRS conditions of contract with all other conditions specified in the tender.
I/We also confirm that Rates and other financial terms quoted in relevant column of financial bid will only be ruling terms for acceptance. Such terms quoted anywhere else should be ignored. [Denial of this condition not recommended].
Undertaking for GST. We hereby declare that in quoting the basic price, we have taken into account the full effect of Input Tax Credit available under GST. We, further agree to pass on any financial gain/benefit as may become available in future in respect of all the input tax credit on the date of supply by way of reduction in price and advise the purchaser accordingly. We also undertake that we are aware of the provisions of section 171 of the CGST Act and consequences thereof if we fail to comply with the same. We shall file their GSTR-1 and GSTR-3B for transaction with Railways in due time preferably every month so that ITC benefit can be availed by Railway.

Similar open tenders

Soonest first

Tender notice (PDF)