Browse all bids
eProcureOpenWorks

At TSK Division:-Provision of one 6.0M wide FOB at Bordoloni (BDLN) station.

Ministry of Railways

O/O DRM, works , Tinsukia DRM Office building, N.F. Railway Tinsukia

Delivers to

Guwahati

Overview

22 facts from the tender

Ministry of Railways published this works tender on eProcure on 8 Oct 2026, for Guwahati. The estimated value is ₹6.7 Cr and the EMD is ₹13.3 L. It closes on 30 Oct 2026, 3:00 pm IST. Tender ID 92484257 · Ref 01-TSK-ENGG-53-2026.

Timeline

  1. Published8 Oct 2026 · 4:51 pm
  2. Closes30 Oct 2026 · 3:00 pm

Bidding

Bid type
Open/Advertised
Contract type
Works - General · Expenditure
Tender type
Open
Tendering section
DEN/II/TSK
Bidding system
Single Packet System
Bidding style
Single Rate for Each Schedule
Validity of offer
60 days
Completion period
12 Months
Tender document cost
None
JV / consortium
Not allowed
Ranking order
Lowest to Highest
Expenditure type
Capital (Works)
Pre-bid meeting
None

Buyer

Inviting authority
TINSUKIA DIVISION-ENGINEERING/N F RLY
Organisation type
Central Govt. Ministry/Department
Product category
Railway related Products
Location
Guwahati
Portal
eProcure
Inviting officer
DRM W TSKTINSUKIA DIVISION-ENGINEERING/N F RLY

Important dates

Published
8 Oct 2026, 4:51 pm IST
Bidding starts
16 Oct 2026
Closes
30 Oct 2026, 3:00 pm IST

Declarations by the buyer

  • Complies with the Public Procurement (Make in India) Order 2017
  • The tender inviting authority confirms this tender does not violate the GFR rules on procurement through GeM
  • Bidders from a country sharing a land border with India must be registered with the competent authority

Schedule of work

7 items
ItemQuantityRailways’ estimated rateAmount
Schedule A · IRUSSOR 2021 Items in connection with the work- Provision of one 6.0M wideFOB at Bordoloni (BDLN) station.
1IRUSSOR ITEM₹3,26,88,607.55
Schedule B · NSR Items in connection with the work-Provision of one 6.0M wide FOB at Bordoloni (BDLN) station.
1Supplying ,Manufacturing, Fitting and Fixing in position of M-35 grade precast RCC passenger platform wall as per N.R.H.Q.E (P)'s Drg no. P-209-MS/2014 including cost of cement , reinforcement (i.e cost also includes cutting, hooking, bending & binding of Reinforcement), Centering, Shuttering, finishing admixtures in recomended propotion to accelerate, retard, setting of concrete, rate also including cost of Hiring of Hydra/Crane , driver/ operator for loading/unloading/ fixing of precast wall,excluding cost of transportation, loading unloading, x-ing of track nallah etc. (Loading and Unloading ,Cost of Transporation from Factory to be paid separately).45 Each₹11,778.34₹5,30,025.30
2Manufacturing, supplying & fixing of pr-fabricated RCC coping stone of size 530mmx1125mmx100mm thick as per top face designed and approved by site Engineer with M-30 grade RCC with 8mm dia. Tor steel at 150mm c/c both ways and manufactured by vibro compaction process using jointless FRP/GRP steel moulds of required size, shape & design. The item includes cost of cement, reinforcement, transportation etc. (Note: Under layer of cement mortar to be laid as per site conditions & should be paid for separately.76 Each₹1,819.58₹1,38,288.08
3Supplying, fitting, fixing of stud shear connector (25 mm X 100-200 mm in size ) conforming to IS 3935-1966 as per the specification of RDSO's Drg no 8-11753 with latest correction including welding by using stud welding machine including supply of all materials, labours, tools, tracks etc complete in all respect. The rate also includes testing/appearance test, ring test and bend test etc. as per direction of Engineer at site. (Rate is inclusive of all taxes.).1,850 Each₹407.99₹7,54,781.50
4Third party inspection/ supervision of fabrication and erection work of FOB Elements (Girders, Columns, Staircases, Trusses Etc.) as per RDSO standard drawings at stations as per the work order, latest drawings, relevant codes /standard, approved QAP/WPSS.171 MT₹1,864.09₹3,18,759.39
5Providing Decking system and roof celling using decking sheets of BMT (Base Metal Thickness) of 1.2mm with minimum yield strength of 550 Mpa having 275 GSM (gm/sqm) coating on both side of sheet conforming to IS-1394 and BS EN 10147: 2000 similar to LYSAGHTSMARTDEKTM 51 of Tata blue scope of equivalent system as per manufacturer specification including profiling , embossing and fixing with all contractor's men, materials fasteners, fixtures equipments etc. Complete including working across track above OHE with all lead and lifts, this item should be separately designed for using as decking sheet of BMT.795 Sqm₹1,903.66₹15,13,409.70
Schedule A1 · CPWD 2023 Items in connection with the work -Provision of one 6.0M wide FOB at Bordoloni (BDLN) station.
2CPWD ITEMSEscalation 46.47%₹3,05,81,363.35
Total₹6,65,25,234.87

Bids quote a percentage above, below or at par with these rates · The total matches the advertised value.

Documents

9 files

Documents to submit

Commercial-Compliance

  • The tenderer should furnish detail information in regards to Employment/Partnership etc. of Retired Railway Employee as per clause 16 of GCC -2022 and clause no. 14 of second sheet of Tender document. In case no employment/Partnership etc., NIL declaration to be submitted.

    Document required

  • Railway Boards letter No. 2020/ACII/9/6/e dtd.07.04.2022At the time of submission of Bank Guarantee, it is necessary that following details entered into SFMS by bank authority while issuing Bank Guarantee by vendors/contractors in favour of Railways. (R.B's letter No. 2020/ACII/9/6/e dtd.07.04.2022)IFSC CODE SBIN000RAILIFSC type BRANCHBANK NAME STATE BANK OF INDIABRANCH NAME RAILCITY NAME NAVI MUMBAIADDRESS SECTOR-11, CBD BELAPUR, NAVI MUMBAIDISTRICT NAVI MUMBAISTATE MAHARASHTRABG ENABLED YESThis IFSC code is only valid for BG issuance and verification in favour of Railways.

    Document required

  • The tenderer/s shall submit a duly filled Tender Form (First Sheet) as Annexure-I of Section-VII of the Standard tender document.

    Document required

  • Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

    Document optional

  • A. List of Personnel, Organization available on hand and proposed to be engaged for the subject work.

    Document required
    1. List of plant Machinery available on hand own and proposed to be inducted own hired to be given separately for the subject work.
    2. List of Works completed in the last three financial years giving description of work, organization for whom executed, approximate value of contract at the time of award, date of award and date of scheduled completion of work, Date of actual start, actual completion and final value of contract should also be given.
    Document required

  • D. List of works on hand indicating description of work, contract value, and approximate value of balance work yet to be done and date of award.

    Document required

  • The tenderers whether sole proprietor , a limited company or a partnership firm he/they should submit authentic proof in terms of partnership deed, proprietorship documents etc. along with the tender. If he/they want to act through agent or individual partners should submit a power of attorney duly stamped and authenticated by Notary Public or by Magistrate in favour of specific person whether he/she/they are partners of the firm or any other person specifically authorizing him/her name to submit the tender, sign the agreement , receive money, witness measurements, sign measurement books , compromise, settie, relinquish any claims, preferred by firm and also sign No Claim Certificate and refer all or any disputes arbitration.

    Document required

Eligibility

Special Financial Criteria

  • Financial Eligibility Criteria The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited.

    Document required

  • The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover.

    Document required

  • The tenderers shall submit requisite information as per Annexure-XIVA, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.

    Document required

  • Clause Regarding GST-

    1. Tenderer should furnished their GSTIN numbers representing the States in which they are registered for GST, along with address of Registered Office, Place of business in State etc.
    2. The contract is under GST act & rules as applicable time to time.
    3. All the bidders/tenders should ensure that they are GST compliant and their quoted tax structure / rates are as per GST Law.
    Document required

Special Technical Criteria

  • Experience in similar nature of work- (a)The tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:

    Document required

  • ( i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender.

    Document required
    1. The total value of similar nature of works completed during the qualifying period and not the payments received within qualifying period alone shall be considered.
    2. It should be noted that credentials against the work executed for private organizations shall not be considered. The credentials against similar nature of work done certificate issued from Govt/Semi-Govt Organizations and PSUs are only acceptable.
    Document required

  • (b)In case of composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:

    Document required

  • (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender.

    Document required

  • Note Separate completed works of minimum required values for each component can also be considered for fulfilment of technical eligibility criteria.

    Document required

  • (ii)In such cases, what constitutes a component in a composite work shall be clearly predefined with estimated tender cost of it, as part of the tender documents without any ambiguity. Any work or set of works shall be considered to be a separate component, only when cost of the component is more than 2 crore each

    Document required

  • Note for Special Technical Criteria- Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of opening of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/ last bill paid by company in support of above work experience certificate.

    Document required

  • "No post tender correspondence will be done with the participant tenderer(s) for deficient credentials noted during scrutiny of tender/ offer nor any credential will be accepted after opening of the tender and the offer shall be decided on the basis of submitted/ credentials downloaded with offer only".

    Document required

  • Similar Nature of work Any steel structure fabrication and launching works.

    Document required

Partnership firm/Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.

  • Please submit a certificate in the prescribed format (please download the format from the link given below). Non submission of the certificate, or submission of certificate either not properly filled in, or in a format other than the prescribed format shall lead to summary rejection of your offer. ( Click here to download the Format of Self Certification)

Check each criterion against the tender notice before you bid.

Commercial conditions

EMD
₹1,330,500
Tender fee
None

Terms & conditions

16 conditions

Commercial-Compliance

  • The following documents should be specified for submission along with tender:

General Instructions

  • The manual/offline mode of payment through Demand Draft, Bankers Cheque, Cash Deposit Receipt shall not be available against works tenders. The bidders will have to make all payments either through Net Banking, debit/credit etc. available on IREPS Portal. Fixed deposit Receipt (FDR) will not be accepted as EMD for tenders invited on IREPS (e-tender portal).

  • Tenderers intending to participate in the e-tender must make payment of the Cost of Tender Document and Earnest Money, online as per the provisions available in IREPS Works Tender Module.

  • For those conditions for which standard formats have been given in the uploaded document titled-Formats for uploading of various format. The information should only be submitted in these standard formats.

  • Rates are inclusive of all taxes/octroi, license fee, royalty charges etc. legally leviable by State, Central Govt. and/or any other local authority.

  • In addition to General condition of contract 2014 and Indian Railways Unified standard specification Works Materials Volume I II 2010, revised upto date, special condition attached shall also apply.

  • Sales tax/Business tax, Royalty etc. will be recovered as per extant instruction on the subject.

  • Note for Commercial compliance :-

  • In case of items C. and D. of Commercial Compliance, supportive documents/certificates from the organizations with whom they worked/are working should be enclosed.

  • Certificates from private individuals for whom such works are executed being executed is not acceptable.

Show all 16

  • Eligibility criteria for works tender in respect of partnership firms:-

  • If the tenderer is a partnership firm, all the partners shall be jointly and severally liable for successful completion of the work and no request for change on the certification of the firm shall be entertained.

  • During the currency of the contract, no partner of the firm shall be permitted to withdraw from partnership business and in such and event it shall be treated as breach of trust and abandonment of the contract.

  • JOINT VENTURE will not be permitted for the tenders.

  • Any Conditional offer will be summarily rejected. For Standard Financial criteria and Standard Technical criteria - Tenderers are required to submitted authenticated certificate along with the tenders from officers of government or semi- government/public sector undertakings under whom the work has been executed indicating there in the name of work executed, value of works/payment details and period during which completed. Such certificates should have signature and seal of the concerned officer. In the absence of such certificate the tender may not be considered.

  • Tender would close at the specified time and date. In case the specified date is declared a holiday, the Tender would close at the same time on the next working day.

Bidder declarations (11)

Undertakings

  • I/ We have visited the works site and I / We am / are aware of the site conditions.

Certifications

  • I/we the tenderer (s) am/are signing this document after carefully reading the contents.

  • I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.

  • I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.

  • I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.

  • I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.

  • I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.

  • I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.

  • I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.

  • I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.

  • I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)

Similar open tenders

Soonest first

Search similar in the explorerFind this tender in the explorer

Tender notice (PDF)