Electrical work in c/w Provision of Relay Hut for Gate Signalling at Non Interlocked L-xing gates over Ambala Division (TVU between 10,000 and 20,000), Provision of FOB with Ramp at Raipur Haryana Ra…
Ministry of Railways
office of Sr.DEE/G/UMB office of Sr.DEE/TRD/UMB Ambala Cantt
Delivers to
Ambala, Haryana
Overview
23 facts from the tenderMinistry of Railways published this works tender on eProcure on 12 Oct 2026, for Ambala, Haryana. The estimated value is ₹1.8 Cr and the EMD is ₹3.5 L. It closes on 3 Nov 2026, 3:00 pm IST. Tender ID 92158398 · Ref 30-Elect-T-12-2026-27.
Timeline
- Published12 Oct 2026 · 6:48 pm
- Bidding startsin 4d 9h20 Oct 2026
- Closes3 Nov 2026 · 3:00 pm
Bidding
- Bid type
- Open/Advertised
- Contract type
- Works - General · Expenditure
- Tender type
- Open
- Tendering section
- WORKS
- Bidding system
- Single Packet System
- Bidding style
- Single Rate for Tender
- Validity of offer
- 60 days
- Completion period
- 6 Months
- Tender document cost
- None
- JV / consortium
- Not allowed
- Ranking order
- Lowest to Highest
- Expenditure type
- Capital (Works)
- Pre-bid meeting
- None
Buyer
- Inviting authority
- AMBALA DIVISION-ELECTRICAL/NORTHERN RLY
- Organisation type
- Central Govt. Ministry/Department
- Product category
- Railway related Products
- Location
- Ambala, Haryana · the inviting office's place
- Portal location
- New Delhi · as listed on eProcure
- Portal
- eProcure
- Inviting officer
- Sr.DEE-G-UMBAMBALA DIVISION-ELECTRICAL/NORTHERN RLY
Important dates
- Published
- 12 Oct 2026, 6:48 pm IST
- Bidding starts
- 20 Oct 2026
- Closes
- 3 Nov 2026, 3:00 pm IST
Declarations by the buyer
- Complies with the Public Procurement (Make in India) Order 2017
- The tender inviting authority confirms this tender does not violate the GFR rules on procurement through GeM
- Bidders from a country sharing a land border with India must be registered with the competent authority
Schedule of work
140 items| Item | Quantity | Railways’ estimated rate | Amount |
|---|---|---|---|
| Schedule A · Provision of Relay Hut for Gate Signalling at Non Interlocked L-xing gates over Ambala Division (TVU between 10,000 and 20,000) | |||
| 1Supply & recessing/ fixing of PVC conduit pipe conforming to IS 9537 part- III/1983(latest version) with accessories , junction box etc. including making chase , plastering/clamping etc. as per technical spec.(i)25 mm (medium) | 5,000 Metre | ₹49.38 | ₹2,46,900 |
| 2Supply and drawing of the following Sizes FRLS PVC insulated multi-stranded copper conductor single core flexible cable conforming to IS 694 ( latest version ) in laid (recessed/Surface) MS/PVC/HDG Conduit pipe for wiring of point wiring/circuit wining/Sub main/Main as required & as per explanatory note including drawing, connection testing and commissioning. (i)1.5 sqmm | 5,500 Metre | ₹17.17 | ₹94,435 |
| 3Supply and drawing of the following Sizes FRLS PVC insulated multi-stranded copper conductor single core flexible cable conforming to IS 694 ( latest version ) in laid (recessed/Surface) MS/PVC/HDG Conduit pipe for wiring of point wiring/circuit wining/Sub main/Main as required & as per explanatory note including drawing, connection testing and commissioning. (i)2.5 sqmm | 5,000 Metre | ₹26.86 | ₹1,34,300 |
| 4Supply and drawing of the following Sizes FRLS PVC insulated multi-stranded copper conductor single core flexible cable conforming to IS 694 ( latest version ) in laid (recessed/Surface) MS/PVC/HDG Conduit pipe for wiring of point wiring/circuit wining/Sub main/Main as required & as per explanatory note including drawing, connection testing and commissioning. (i)4 sqmm | 2,500 Metre | ₹44.40 | ₹1,11,000 |
| 5supply,fixing,testing & commisioning of 12 module metal GI box with 12 module cover plate | 50 Numbers | ₹708.11 | ₹35,405.50 |
| 6supply,fixing,testing & commisioning of 8 module metal GI box with 8 module cover plate | 50 Numbers | ₹514.14 | ₹25,707 |
| 7supply,fixing,testing & commisioning of 3 module metal GI box with 3 module cover plate | 200 Numbers | ₹249.42 | ₹49,884 |
| 8supply,fixing,testing & commisioning of 6 amp module switch | 950 Numbers | ₹112.58 | ₹1,06,951 |
| 9supply,fixing,testing & commisioning of 6 amp 5 pin module socket | 150 Numbers | ₹193.95 | ₹29,092.50 |
| 10supply,fixing,testing & commisioning of 16 amp module switch | 150 Numbers | ₹215.43 | ₹32,314.50 |
| 11supply,fixing,testing & commisioning of 16 amp module socket | 150 Numbers | ₹206.71 | ₹31,006.50 |
| 12Supply of batten/ angle holder/ ceiling rose & installation on the junction box of laid conduit including connection, testing & commissioning as per tech. spec..(i)Bakelite batten/angle holder | 50 Numbers | ₹19.27 | ₹963.50 |
| 13Supply of batten/ angle holder/ ceiling rose & installation on the junction box of laid conduit including connection, testing & commissioning as per tech. spec..(i)Bakelite ceiling rose 3 plate | 500 Numbers | ₹19.76 | ₹9,880 |
| 14Laying of 2/3/4 core 16/25/35/50/75/95 /120/240/400 sqmm LT UG/XLPE in Trench/Pipe/Cable tray as per site requirement all as specified and as directed. Note:- LT UG Cable will be supplied by the Railways free of cost. However, Contractor has to make own arrangement for shifting the cable to site from the Elect maintenance Depot store. | 5,000 RM | ₹27.10 | ₹1,35,500 |
| 15Excavation of cable trench by digging 1000 mm deep and then refilling after laying of cable as per IS1255:1983 and technical specification on a cushion of sand 100 mm below and providing protective bricks as per drawing and soil and ramming, levelling and repairing the floor to its original condition. i) Trench width 300 mm wide for laying up to 3 cables with 9 protective bricks per meter. | 4,000 Metre | ₹104.05 | ₹4,16,200 |
| 16Excavation of cable trench by cutting/breaking station platform concrete/pucca floor digging 400 mm deep and then refilling after laying of cable as per IS 1255:1983 and technical specification enclosed on a cushion of sand 100 mm below and providing protective bricks as per drawing and soil and ramming, leveling and repairing and finishing the said portion of platform with 1:2:4 cement concrete mixture 100 mm deep from top. i) Trench width 300 mm wide for laying up to 3 cables with 9 protective bricks per meter. | 1,000 Metre | ₹390.08 | ₹3,90,080 |
| 17Supply,erection,testing and commissioning of LED tube light fittings 20 Watt complete as per specification of CEE/NR/121-Elect/PS/2019(Rev-04) dt 04/11/2019 or latest. Guarantee-05 years from date of commissioning. | 500 Numbers | ₹608.53 | ₹3,04,265 |
| 18Supply ,installation ,testing & commissioning of AC MS Exhaust fan 380 mm 900RPM , copper wound motor and with double ball bearing connection with twin core PVC insulated flexible cable size 14/0076" as required suitable for operation on single phase 230 V AC Supply system, earthing, including by grouting MS Nut & bolt of suitable size as per IS:2312 or latest . | 100 Numbers | ₹3,287.02 | ₹3,28,702 |
| 19Supply, installation, testing and commissioning of Ceiling fan 1200 mm sweep having BEE 5 star rating, Motor: Brushless DC, power consumtion (W): 25- 30, Winding: Copper, Speed control: 5 step with Remote, No. of Blades: 3, Rated Voltage: 140- 285 V AC, 50 Hz AC, Rated speed in RPM: 340, conforming to IS:374/1979 and IS:374/2019 or latest, Conformity to Safety Standard IS: 302/1979 connection with twin core PVC insulated flexible copper conductor copper cable of size 14/0.193 mm including earthing. | 200 Numbers | ₹3,343.58 | ₹6,68,716 |
| 20Supply, installation, testing and commissioning of the following double door wall mounted pre fabricated LT distribution Board of approved make as per spec."i) Incoming MCB DP 40 A ,10 KA, (B/C)=01 No.ii)Out going MCB SP 6/32 A 10 KA,(B/C)=06 No." | 50 Job | ₹2,825.62 | ₹1,41,281 |
| 21Earthing with 40mm dia. Earth GI pipe class 'B' , 3 meter long, earth electrode as earth per IS:3043 (latest version) to achieve earth resistances less than 5ohms including construction of masonry enclosures with hinged cover plate of cast iron/RCC(Heavy Duty with lifting arrangement) with locking arrangement as required (Outer hole size: 450XmmX450mm and Cover plate(CI/RCC) size:300mmX300mm) on top, provision of earth plate, connections from earth electrode to switch earth gear/pole as per technical Specification/I.E. Rule. | 200 Job | ₹3,139.84 | ₹6,27,968 |
| 22Supply & recessing/fixing on surface 6 SWG GI wire for loop earthing as required as per technical specification. | 2,000 Metre | ₹8.64 | ₹17,280 |
| 23Fabrication, supply, erection, testing and commissioning of control and distribution LT panel board for panel colour light signalling(CLS) as per RDSO Drawing No.TI/SPC/PSICLS/0020 and approved source for 10 kVA 240 V 3 supply 60 Amp and as per explanatory note. | 50 Numbers | ₹64,218.28 | ₹32,10,914 |
| 24Supply fixing testing & commissioning of Rain proof powder coated MS Box of suitable sizehousing MCCB 63 Amp 3 pole complete with hinged and lockable door on AT mast with suitable MS clamp as per site requirement& explanatory note. | 100 Numbers | ₹3,702.05 | ₹3,70,205 |
| 25Design, Supply, testing & commissioning of floor mounted MS feeder post of out door type MS Sheet 16 SWG Die pressed of size 550x450x275 mm deep complete with Aluminium bus bar four nos duly grouted with cement concrete ratio 1:2:4 duly earthed with earthing terminals .( The Bus Bar will be of 500 Amps rating) | 50 Job | ₹4,035.10 | ₹2,01,755 |
| 26Supply , lying of GI pipe class B ISI marked under road, clamping with erected pole or wall as per tech spec for passing cable.(i)50 mm dia | 1,000 Metre | ₹319.06 | ₹3,19,060 |
| 27Supply, erection, testing and commissioning of LED street light fitting complete with driver (70 watts) confirming to CEE/NR/121-Elect/PS/2019(Rev-04) dt 04/11/2019 or latest specification and site requirement. in details. Guarantee-05 years from date of commissioning. | 50 Numbers | ₹5,710.84 | ₹2,85,542 |
| 28Supply, fixing of 1 meter long 40 mm dia GI pipe bracket with two no. 25x6mm clamp each with nut & bolt to hold. | 50 Numbers | ₹450.86 | ₹22,543 |
| Schedule B · Provision of petrol start,petrol run portable generator sets in ARTs, ARMEs & SPARTs/SPARMVs over Ambala division & Power suppy augmentation of power supply infrastructureby providing pit lights at ART siding for maintenance of ART at bathinda | |||
| 01Supply & recessing/ fixing of P V C conduit pipe conforming to IS 9537 part- III/1983(latest version) with accessories , junction box etc. including making chase , plastering/clamping etc. as per technical spec.i) 25 mm (medium) | 300 Metre | ₹49.38 | ₹14,814 |
| 02Supply, laying, fixing, testing and commisioning of following sizes FRLS PVC insulated multi-stranded copper conductor single core cable 1100V conforming to IS 694 ( latest version ) make Finolex, Havells, Polycab, KEI or equivalent in the existing (recessed/Surface) MS/PVC/HDG Conduit pipe for wiring of point wiring/circuit wining/Sub main/Main as required & as per explanatory note.i) 2.5 sqmm | 2,000 Metre | ₹26.86 | ₹53,720 |
| 03Supply, laying, fixing, testing and commisioning of following sizes FRLS PVC insulated multi-stranded copper conductor single core cable 1100V conforming to IS 694 ( latest version ) make Finolex, Havells, Polycab, KEI or equivalent in the existing (recessed/Surface) MS/PVC/HDG Conduit pipe for wiring of point wiring/circuit wining/Sub main/Main as required & as per explanatory note.ii) 4 sqmm | 1,000 Metre | ₹44.40 | ₹44,400 |
| 04Supply of batten/ angle holder/ ceiling rose & installation on the junction box of laid conduit including connection, testing & commissioning as per tech. spec..i) Bakelite batten/angle holder | 25 Numbers | ₹19.27 | ₹481.75 |
| 05Supply and fixing of 3 phase & neutral (8/10 way) Phophetised powder painted front side opening hinged lockable door with gaskets, the DB shall be suitable for 415 volts, 50 Hz, supply dust & vermin proof only knobs of MCB remain out for operation without opening of door . The DB shall have copper bus bars, din channels, 1 no. 100 Amps Cap. MCCB -25 KA on main and 6 nos. 32 Amps DP MCB"s (2 no MCB on each phase & space for one additional MCB,DP) The box & MCB shall conform to relevant IS spec. Distribution box shall be provided recessed in wall flush to wall surface as per site requirement. | 4 Numbers | ₹8,928.43 | ₹35,713.72 |
| 06Earthing with 40mm dia. Earth GI pipe class 'B' , 3 meter long, earth electrode as earth per IS:3043 (latest version) to achieve earth resistances less than 5ohms including construction of masonry enclosures with hinged cover plate of cast iron/RCC(Heavy Duty with lifting arrangement) with locking arrangement as required (Outer hole size: 450XmmX450mm and Cover plate(CI/RCC) size:300mmX300mm) on top, provision of earth plate, connections from earth electrode to switch earth gear/pole as per technical Specification/I.E. Rule. | 4 Job | ₹3,139.84 | ₹12,559.36 |
| 07Supply & recessing/fixing on surface 6 SWG GI wire for loop earthing as required as per technical specification. | 100 Metre | ₹8.64 | ₹864 |
| 08Supply, fixing, testing and commissioning of 48V, 50 Hz LED based pit light pit luminary with IP-67 protection, impact resistance IK10 having system wattage less than or equal to 22 watt complete with anti theft mounting arrangement as per site requirement of make Phillips, Bajaj,Havells or similar conforming to CEE/NR's spec. No. CEE/NR/121- lect/PS/2018 (Rev- '3') or latest at Tech Spec-III attached & PCEE/NR's spec. No. PCEE/NR/121- Elect/PS/2019 (Rev- '4') at Tech Spec-IV attached or latest. | 25 Numbers | ₹5,244.23 | ₹1,31,105.75 |
| 09Design, Supply, installation ,testing and commissioning of step down Transformer outdoor type, 10 KVA,with control panel. Specifications for transformer Input voltage Range 440 V AC, Output Voltage 48 V AC( +/- 5%), Minimum 4 output terminals, Type of cooling-oil cooled, Efficiency-more than 95%, Winding -copper Core mitered CRGO notching core material,display - Digital, Control card-Easy maintenance & service ability, Temp rise-45° C above ambient, Frequency- 50 Hz, Protections- Low/High voltage , Control panel:Size & capacity of control panel should be as per transformer capacity 10KVA. Control Panel should have 3 phase incoming & required capacity outgoing feeders. Both transformer & control panel should be approved by railway before installation as per site requirement. | 1 Numbers | ₹1,26,051.04 | ₹1,26,051.04 |
| Schedule C · Electrical work in c/w Construction of new 10 bedded barracks for RPF out post at Abohar with furniture. | |||
| 01Supply & recessing/ fixing of P V C conduit pipe conforming to IS 9537 part- III/1983(latest version) with accessories , junction box etc. including making chase , plastering/clamping etc. as per technical spec. i) 25 mm (medium) | 900 Metre | ₹49.38 | ₹44,442 |
| 02Supply, laying, fixing, testing and commisioning of following sizes FRLS PVC insulated multi-stranded copper conductor single core cable 1100V conforming to IS 694 ( latest version ) make Finolex, Havells, Polycab, KEI or equivalent in the existing (recessed/Surface) MS/PVC/HDG Conduit pipe for wiring of point wiring/circuit wining/Sub main/Main as required & as per explanatory note.i) 1 sqmm | 1,000 Metre | ₹14.19 | ₹14,190 |
| 03Supply, laying, fixing, testing and commisioning of following sizes FRLS PVC insulated multi-stranded copper conductor single core cable 1100V conforming to IS 694 ( latest version ) make Finolex, Havells, Polycab, KEI or equivalent in the existing (recessed/Surface) MS/PVC/HDG Conduit pipe for wiring of point wiring/circuit wining/Sub main/Main as required & as per explanatory note.ii) 1.5 sqmm | 2,200 Metre | ₹17.17 | ₹37,774 |
| 04Supply, laying, fixing, testing and commisioning of following sizes FRLS PVC insulated multi-stranded copper conductor single core cable 1100V conforming to IS 694 ( latest version ) make Finolex, Havells, Polycab, KEI or equivalent in the existing (recessed/Surface) MS/PVC/HDG Conduit pipe for wiring of point wiring/circuit wining/Sub main/Main as required & as per explanatory note.iii) 2.5 sqmm | 1,500 Metre | ₹26.86 | ₹40,290 |
| 05Supply, laying, fixing, testing and commisioning of following sizes FRLS PVC insulated multi-stranded copper conductor single core cable 1100V conforming to IS 694 ( latest version ) make Finolex, Havells, Polycab, KEI or equivalent in the existing (recessed/Surface) MS/PVC/HDG Conduit pipe for wiring of point wiring/circuit wining/Sub main/Main as required & as per explanatory note.iv) 4 sqmm | 1,000 Metre | ₹44.40 | ₹44,400 |
| 06Supply, laying, fixing, testing and commisioning of following sizes FRLS PVC insulated multi-stranded copper conductor single core cable 1100V conforming to IS 694 ( latest version ) make Finolex, Havells, Polycab, KEI or equivalent in the existing (recessed/Surface) MS/PVC/HDG Conduit pipe for wiring of point wiring/circuit wining/Sub main/Main as required & as per explanatory note.v) 6 sqmm | 400 Metre | ₹55.16 | ₹22,064 |
| 07supply,fixing,testing & commisioning of 12 module metal GI box with 12 module cover plate | 12 Numbers | ₹708.11 | ₹8,497.32 |
| 08supply,fixing,testing & commisioning of 8 module metal GI box with 8 module cover plate | 8 Numbers | ₹514.14 | ₹4,113.12 |
| 09supply,fixing,testing & commisioning of 6 module metal GI box with 6 module cover plate | 6 Numbers | ₹422.04 | ₹2,532.24 |
| 10supply,fixing,testing & commisioning of 3 module metal GI box with 3 module cover plate | 15 Numbers | ₹249.50 | ₹3,742.50 |
| 11Supply of batten/ angle holder/ ceiling rose & installation on the junction box of laid conduit including connection, testing & commissioning as per tech. spec..i) Bakelite batten/angle holder | 10 Numbers | ₹19.27 | ₹192.70 |
| 12Supply of batten/ angle holder/ ceiling rose & installation on the junction box of laid conduit including connection, testing & commissioning as per tech. spec..ii) Bakelite ceiling rose 3 plate | 40 Numbers | ₹19.76 | ₹790.40 |
| 13supply,fixing,testing & commisioning of 6 amp module switch | 110 Numbers | ₹112.58 | ₹12,383.80 |
| 14supply,fixing,testing & commisioning of 6 amp 5 pin module socket | 30 Numbers | ₹193.95 | ₹5,818.50 |
| 15supply,fixing,testing & commisioning of 16 amp module switch | 15 Numbers | ₹215.43 | ₹3,231.45 |
| 16supply,fixing,testing & commisioning of 16 amp module socket | 15 Numbers | ₹206.71 | ₹3,100.65 |
| 17Supply, installation, testing and commissioning of the following double door wall mounted pre fabricated LT distribution Board of approved make as per spec."i) Incoming MCB DP 40 A ,10 KA, (B/C)=01 No.ii)Out going MCB SP 6/32 A 10 KA,(B/C)=06 No." | 3 Job | ₹2,825.62 | ₹8,476.86 |
| 18Supply, installation, testing and commissioning of the following double door wall mounted pre fabricated LT distribution Board of approved make as per spec."i) Incoming MCB TPN, 63 A ,10 KA, (B/C)=01 No.ii)Out going MCB SP 6/32 A 10 KA,(B/C)=18 Nos.(6 Nos on each phase)" | 1 Job | ₹6,186.30 | ₹6,186.30 |
| 19Earthing with 40mm dia. Earth GI pipe class 'B' , 3 meter long, earth electrode as earth per IS:3043 (latest version) to achieve earth resistances less than 5ohms including construction of masonry enclosures with hinged cover plate of cast iron/RCC(Heavy Duty with lifting arrangement) with locking arrangement as required (Outer hole size: 450XmmX450mm and Cover plate(CI/RCC) size:300mmX300mm) on top, provision of earth plate, connections from earth electrode to switch earth gear/pole as per technical Specification/I.E. Rule. | 10 Job | ₹3,139.84 | ₹31,398.40 |
| 20Supply & recessing/fixing on surface 6 SWG GI wire for loop earthing as required as per technical specification. | 100 Metre | ₹8.64 | ₹864 |
| 21Laying of 2/3/4 core 16/25/35/50/75/95 /120/240/400 sqmm LT UG/XLPE in Trench/Pipe/Cable tray as per site requirement all as specified and as directed. Note:- LT UG Cable will be supplied by the Railways free of cost. However, Contractor has to make own arrangement for shifting the cable to site from the Elect maintenance Depot store. | 1,500 RM | ₹27.10 | ₹40,650 |
| 22Excavation of cable trench by digging 1000 mm deep and then refilling after laying of cable as per IS1255:1983 and technical specification on a cushion of sand 100 mm below and providing protective bricks as per drawing and soil and ramming, levelling and repairing the floor to its original condition. i) Trench width 300 mm wide for laying up to 3 cables with 9 protective bricks per meter. | 1,100 Metre | ₹104.05 | ₹1,14,455 |
| 23Excavation of cable trench by cutting/breaking station platform concrete/pucca floor digging 400 mm deep and then refilling after laying of cable as per IS 1255:1983 and technical specification enclosed on a cushion of sand 100 mm below and providing protective bricks as per drawing and soil and ramming, leveling and repairing and finishing the said portion of platform with 1:2:4 cement concrete mixture 100 mm deep from top. i) Trench width 300 mm wide for laying up to 3 cables with 9 protective bricks per meter. | 150 Metre | ₹390.08 | ₹58,512 |
| 24Supply and erection of 103 mm inner dia Double walled Corrugated pipe under the railway track/road as per site required. | 100 Metre | ₹373.43 | ₹37,343 |
| 25Excavation and refilling of trench 0.3 Mtr. wide and 0.8 mtrs deep on pitched/stone/brick/ paved surface, road/crossing/platform etc and restoring the surface to its original condition. | 100 Metre | ₹149.33 | ₹14,933 |
| 26Supply , lying of GI pipe class B ISI marked under road, clamping with erected pole or wall as per tech spec for passing cable.50 mm dia | 20 Metre | ₹319.06 | ₹6,381.20 |
| 27Supply,erection,testing and commissioning of LED tube light fittings 20 Watt complete as per specification of CEE/NR/121-Elect/PS/2019(Rev-04) dt 04/11/2019 or latest. Guarantee-05 years from date of commissioning. | 40 Numbers | ₹608.53 | ₹24,341.20 |
| 28Supply, installation, testing and commissioning of Ceiling fan 1200 mm sweep having BEE 5 star rating, Motor: Brushless DC (BLDC), power consumtion (W): 25- 30, Winding: Copper, Speed control: 5 step with Remote, No. of Blades: 3, Rated Voltage: 140- 285 V AC, 50 Hz AC, Rated speed in RPM: 340, conforming to IS:374/1979 and IS:374/2019 or latest, Conformity to Safety Standard IS: 302/1979 connection with twin core PVC insulated flexible copper conductor copper cable of size 14/0.193 mm including earthing. | 15 Numbers | ₹3,343.58 | ₹50,153.70 |
| 29supply,fixing,testing & commisioning of modular socket type (2 module) regulator | 15 Numbers | ₹542.62 | ₹8,139.30 |
| 30Supply, installation, testing and commissioning of polycarbonate Exhaust fan 250 mm sweep, with self opening louvers shulters, white colour, complete with all accessories including fixing in box made by ply wood board as per IS:2312 or latest | 4 Numbers | ₹2,578.74 | ₹10,314.96 |
| 31Supply ,installation ,testing & commissioning of AC MS Exhaust fan 380 mm 900RPM , copper wound motor and with double ball bearing connection with twin core PVC insulated flexible cable size 14/0076" as required suitable for operation on single phase 230 V AC Supply system, earthing, including by grouting MS Nut & bolt of suitable size as per IS:2312 or latest . | 3 Numbers | ₹3,287.02 | ₹9,861.06 |
| 32Supply, erection, testing and commissioning of LED street light fitting complete with driver (70 watts) confirming to CEE/NR/121-Elect/PS/2019(Rev-04) dt 04/11/2019 or latest specification and site requirement. in details. Guarantee-05 years from date of commissioning. | 15 Numbers | ₹5,710.84 | ₹85,662.60 |
| 33Supply, fixing of 1 meter long 40 mm dia GI pipe bracket with two no. 25x6mm clamp each with nut & bolt to hold. | 5 Numbers | ₹450.86 | ₹2,254.30 |
| 34Supply Installation Testing & commissioning of Decorative LED Mirror Light Fitting 10- 12 watt to be fitted in mounting.the fitting should have decorative and attractive look.LED should be confirming to CEE/NR's spec. No. CEE/NR/121- Elect/PS/2018 (Rev- '3') or latest at Tech Spec-III attached & PCEE/NR's spec. No. PCEE/NR/121- Elect/PS/2019 (Rev- '4') at Tech Spec-IV attached or latest. | 2 Numbers | ₹757.40 | ₹1,514.80 |
| 35Supply and fixing of indoor type Wall LED reading light,2W, power supply-220- 240V,50Hz complete with all accessories as per IS, Make: Bajaj/Philips/Havells/Crompton/Panasonic or equivalent. | 10 Numbers | ₹1,315.17 | ₹13,151.70 |
| 36Supply,fixing and commissioning of LED backlit single sided signage boards as per CEE/NR/121-Elect/PS/2019(Rev-04) dt 04/11/2019 or latest specification including fabrication and supply of clamping arrangement as desired by site engineer , Guarantee -05 years from date of commissioning . | 20 Square Foot | ₹1,762.94 | ₹35,258.80 |
| 37Supply, installation, testing and commissioning of 25 Amp 30mA sensitivity RCBO DP with enclosure as per technical specification | 4 Numbers | ₹4,652.26 | ₹18,609.04 |
| 38Supply of vertical type storage water heater of 25 liters capacity, material of inner container- vitreous enamelled inner tank conforming to IS-13273, material of outer container-CRCA, BEE 5 star rating , ISI marked & conforming to IS:2082 (latest). | 5 Numbers | ₹8,511.48 | ₹42,557.40 |
| 39Steel body evaporative Desert Cooler conforming to IS: 3315 latest, Nominal air delivery/capacity-4000 cubic meter per hour, Sheet Thickness (nominal) for Filter panel, Grill, Top of cooler body, cabinet- 0.8mm, Sump Tank Sheet Thickness (nominal)-1mm, Sump tank capacity 80 litres, Honeycomb pads, Aluminium blade, Fan size 450mm, Fan motor-submersible pump conforming to IS:11951 or latest, Warranty-1 year. | 6 Numbers | ₹10,548.88 | ₹63,293.28 |
| 40Self-contained drinking water cooler with cooling capacity 150 ltrs/hr, storage capacity 150 ltrs, maximum power consumption 1550 W., IS:1475 or latest. | 1 Numbers | ₹63,070.72 | ₹63,070.72 |
| 41Supply, fixing, testing and commissioning of cabin fan sweep 400 mm oscillating type suitable for low cabin room make Khaitan , BAJAJ,USHA or equivalent. | 5 Numbers | ₹4,398.94 | ₹21,994.70 |
| 42"LT PTTA with IP-65 protection with canopy Junction box -Design, manufacturing, supply, install, testing, erection and commissioning of junction box with 100 Amps MCCB, 4-Pole 36kA & rotary operated mechanism, FP spreader with Aluminium bus bar. As per specification.Note:- All MCCB's should be microprocesser based." | 1 Numbers | ₹47,012.28 | ₹47,012.28 |
| 43Supply & erection of 5 mtrs high hot dip galvanized Octagonal pole with top 70 mm around face bottom 130 mm thick steel base plate size 200X200X12mm complete with appropriate sleeve at the top of pole for following mounting arm bracket 300 mm long suitable foundation and foundation GI nut bolt with washer and smart pack junction box with 6 Amp DP RCBO with 30 mAmp senstivity and terminals and as per explanatory note.i) Single Arm bracket | 10 Numbers | ₹12,352.03 | ₹1,23,520.30 |
| Schedule D · provision of 3 Meter wide FOB(Foot over Bridge) at SBJ(Saraibanjara) station. | |||
| 1Supply & recessing/ fixing of PVC conduit pipe conforming to IS 9537 part- III/1983(latest version) with accessories , junction box etc. including making chase , plastering/clamping etc. as per technical spec.(i)25 mm (medium) | 350 Metre | ₹49.38 | ₹17,283 |
| 2Supply and drawing of the following Sizes FRLS PVC insulated multi-stranded copper conductor single core flexible cable conforming to IS 694 ( latest version ) in laid (recessed/Surface) MS/PVC/HDG Conduit pipe for wiring of point wiring/circuit wining/Sub main/Main as required & as per explanatory note including drawing, connection testing and commissioning. (i)1.5 sqmm | 600 Metre | ₹17.17 | ₹10,302 |
| 3Supply and drawing of the following Sizes FRLS PVC insulated multi-stranded copper conductor single core flexible cable conforming to IS 694 ( latest version ) in laid (recessed/Surface) MS/PVC/HDG Conduit pipe for wiring of point wiring/circuit wining/Sub main/Main as required & as per explanatory note including drawing, connection testing and commissioning. (i)2.5 sqmm | 200 Metre | ₹26.86 | ₹5,372 |
| 4Supply and drawing of the following Sizes FRLS PVC insulated multi-stranded copper conductor single core flexible cable conforming to IS 694 ( latest version ) in laid (recessed/Surface) MS/PVC/HDG Conduit pipe for wiring of point wiring/circuit wining/Sub main/Main as required & as per explanatory note including drawing, connection testing and commissioning. (i)4 sqmm | 100 Metre | ₹44.40 | ₹4,440 |
| 5Supply of batten/ angle holder/ ceiling rose & installation on the junction box of laid conduit including connection, testing & commissioning as per tech. spec..(i)Bakelite ceiling rose 3 plate | 70 Numbers | ₹19.89 | ₹1,392.30 |
| 6Laying of 2/3/4 core 16/25/35/50/75/95 /120/240/400 sqmm LT UG/XLPE in Trench/Pipe/Cable tray as per site requirement all as specified and as directed. Note:- LT UG Cable will be supplied by the Railways free of cost. However, Contractor has to make own arrangement for shifting the cable to site from the Elect maintenance Depot store. | 1,700 RM | ₹27.10 | ₹46,070 |
| 7Excavation of cable trench by digging 1000 mm deep and then refilling after laying of cable as per IS1255:1983 and technical specification on a cushion of sand 100 mm below and providing protective bricks as per drawing and soil and ramming, levelling and repairing the floor to its original condition. i) Trench width 300 mm wide for laying up to 3 cables with 9 protective bricks per meter. | 500 Metre | ₹104.05 | ₹52,025 |
| 8Excavation of cable trench by cutting/breaking station platform concrete/pucca floor digging 400 mm deep and then refilling after laying of cable as per IS 1255:1983 and technical specification enclosed on a cushion of sand 100 mm below and providing protective bricks as per drawing and soil and ramming, leveling and repairing and finishing the said portion of platform with 1:2:4 cement concrete mixture 100 mm deep from top. i) Trench width 300 mm wide for laying up to 3 cables with 9 protective bricks per meter. | 200 Metre | ₹390.08 | ₹78,016 |
| 9Supply,erection,testing and commissioning of LED tube light fittings 20 Watt complete as per specification of CEE/NR/121-Elect/PS/2019(Rev-04) dt 04/11/2019 or latest. Guarantee-05 years from date of commissioning. | 70 Numbers | ₹608.53 | ₹42,597.10 |
| 10Supply, installation, testing and commissioning of the following double door wall mounted pre fabricated LT distribution Board of approved make as per spec."i) Incoming MCB DP 40 A ,10 KA, (B/C)=01 No.ii)Out going MCB SP 6/32 A 10 KA,(B/C)=06 No." | 2 Job | ₹2,825.62 | ₹5,651.24 |
| 11Earthing with 40mm dia. Earth GI pipe class 'B' , 3 meter long, earth electrode as earth per IS:3043 (latest version) to achieve earth resistances less than 5ohms including construction of masonry enclosures with hinged cover plate of cast iron/RCC(Heavy Duty with lifting arrangement) with locking arrangement as required (Outer hole size: 450XmmX450mm and Cover plate(CI/RCC) size:300mmX300mm) on top, provision of earth plate, connections from earth electrode to switch earth gear/pole as per technical Specification/I.E. Rule. | 10 Job | ₹3,139.84 | ₹31,398.40 |
| 12Supply & recessing/fixing on surface 6 SWG GI wire for loop earthing as required as per technical specification. | 250 Metre | ₹8.64 | ₹2,160 |
| 13Supply and laying of HDPE pipe conforming to IS 4984:1995 50 mm dia wall thickness 3 mm PN-6 under the road/air. The work invloves laying of HDPE pipe. | 1,000 Metre | ₹102.45 | ₹1,02,450 |
| 14Excavation and refilling of trench 0.3 Mtr. wide and 0.8 mtrs deep on pitched/stone/brick/ paved surface, road/crossing/platform etc and restoring the surface to its original condition. | 1,000 Metre | ₹149.33 | ₹1,49,330 |
| 15LT PTTA with IP-65 protection with canopy Junction box -Design, manufacturing, supply, install, testing, erection and commissioning of junction box with 100 Amps MCCB, 4-Pole 36kA & rotary operated mechanism, FP spreader with Aluminium bus bar. As per specification. | 1 Numbers | ₹47,012.28 | ₹47,012.28 |
| 16Supply, erection, testing and commissioning of LED street light fitting complete with driver (70 watts) confirming to CEE/NR/121-Elect/PS/2019(Rev-04) dt 04/11/2019 or latest specification and site requirement. in details. Guarantee-05 years from date of commissioning. | 12 Numbers | ₹5,710.84 | ₹68,530.08 |
| 17Design, manufacturing, supply, fixing & commissoning of 2 mm thick hot dip galvanized cable tray of under mentioned sizes with all accessories such as corner, bend tie rods etc as per site requirement and to the satisfaction of railway authority.(i) 50x150x50 mm | 155 Metre | ₹918.78 | ₹1,42,410.90 |
| Schedule E · Provision of FOB with Ramp at Raipur Haryana Railway Station | |||
| 1Supply & recessing/ fixing of PVC conduit pipe conforming to IS 9537 part- III/1983(latest version) with accessories , junction box etc. including making chase , plastering/clamping etc. as per technical spec.(i)25 mm (medium) | 300 Metre | ₹49.38 | ₹14,814 |
| 2Supply and drawing of the following Sizes FRLS PVC insulated multi-stranded copper conductor single core flexible cable conforming to IS 694 ( latest version ) in laid (recessed/Surface) MS/PVC/HDG Conduit pipe for wiring of point wiring/circuit wining/Sub main/Main as required & as per explanatory note including drawing, connection testing and commissioning. (i)1.0 sqmm | 400 Metre | ₹14.19 | ₹5,676 |
| 3Supply and drawing of the following Sizes FRLS PVC insulated multi-stranded copper conductor single core flexible cable conforming to IS 694 ( latest version ) in laid (recessed/Surface) MS/PVC/HDG Conduit pipe for wiring of point wiring/circuit wining/Sub main/Main as required & as per explanatory note including drawing, connection testing and commissioning. (i)1.5 sqmm | 370 Metre | ₹17.17 | ₹6,352.90 |
| 4Supply and drawing of the following Sizes FRLS PVC insulated multi-stranded copper conductor single core flexible cable conforming to IS 694 ( latest version ) in laid (recessed/Surface) MS/PVC/HDG Conduit pipe for wiring of point wiring/circuit wining/Sub main/Main as required & as per explanatory note including drawing, connection testing and commissioning. (i)2.5 sqmm | 200 Metre | ₹26.86 | ₹5,372 |
| 5Supply of batten/ angle holder/ ceiling rose & installation on the junction box of laid conduit including connection, testing & commissioning as per tech. spec..(i)Bakelite ceiling rose 3 plate | 40 Numbers | ₹19.89 | ₹795.60 |
| 6Supply, installation, testing and commissioning of the following double door wall mounted pre fabricated LT distribution Board of approved make as per spec."i) Incoming MCB DP 40 A ,10 KA, (B/C)=01 No.ii)Out going MCB SP 6/32 A 10 KA,(B/C)=06 No." | 2 Job | ₹2,825.62 | ₹5,651.24 |
| 7Earthing with 40mm dia. Earth GI pipe class 'B' , 3 meter long, earth electrode as earth per IS:3043 (latest version) to achieve earth resistances less than 5ohms including construction of masonry enclosures with hinged cover plate of cast iron/RCC(Heavy Duty with lifting arrangement) with locking arrangement as required (Outer hole size: 450XmmX450mm and Cover plate(CI/RCC) size:300mmX300mm) on top, provision of earth plate, connections from earth electrode to switch earth gear/pole as per technical Specification/I.E. Rule. | 4 Job | ₹3,139.84 | ₹12,559.36 |
| 8Supply & recessing/fixing on surface 6 SWG GI wire for loop earthing as required as per technical specification. | 200 Metre | ₹8.64 | ₹1,728 |
| 9Supply,erection,testing and commissioning of LED tube light fittings 20 Watt complete as per specification of CEE/NR/121-Elect/PS/2019(Rev-04) dt 04/11/2019 or latest. Guarantee-05 years from date of commissioning. | 40 Numbers | ₹608.53 | ₹24,341.20 |
| 10Laying of 2/3/4 core 16/25/35/50/75/95 /120/240/400 sqmm LT UG/XLPE in Trench/Pipe/Cable tray as per site requirement all as specified and as directed. Note:- LT UG Cable will be supplied by the Railways free of cost. However, Contractor has to make own arrangement for shifting the cable to site from the Elect maintenance Depot store. | 700 RM | ₹27.10 | ₹18,970 |
| 11Excavation of cable trench by digging 1000 mm deep and then refilling after laying of cable as per IS1255:1983 and technical specification on a cushion of sand 100 mm below and providing protective bricks as per drawing and soil and ramming, levelling and repairing the floor to its original condition. i) Trench width 300 mm wide for laying up to 3 cables with 9 protective bricks per meter. | 300 Metre | ₹104.05 | ₹31,215 |
| 12Excavation of cable trench by cutting/breaking station platform concrete/pucca floor digging 400 mm deep and then refilling after laying of cable as per IS 1255:1983 and technical specification enclosed on a cushion of sand 100 mm below and providing protective bricks as per drawing and soil and ramming, leveling and repairing and finishing the said portion of platform with 1:2:4 cement concrete mixture 100 mm deep from top. i) Trench width 300 mm wide for laying up to 3 cables with 9 protective bricks per meter. | 100 Metre | ₹390.08 | ₹39,008 |
| 13Supply and erection of Cable Route Marker | 10 Numbers | ₹137.78 | ₹1,377.80 |
| 14Supply, installation, testing and commissioning of 25 Amp 30mA sensitivity RCBO DP with enclosure as per technical specification | 2 Numbers | ₹4,652.26 | ₹9,304.52 |
| 15Design, manufacture,display, installation of wall / hanging / floor mounting type LED illuminated sign /direction boards in half elliptical shape.The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness.The text / graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed / router cut on monomeric calendered vinyl of 70 um thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site equirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided. | 30 Square Foot | ₹3,029.38 | ₹90,881.40 |
| 16Erection and installation of wall / hanging / floor mounting type LED illuminated sign / direction boards in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed / router cut on monomeric calendered vinyl of 70 um thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided. | 30 Square Foot | ₹303.04 | ₹9,091.20 |
| 17LT PTTA with IP-65 protection with canopy Junction box -Design, manufacturing, supply, install, testing, erection and commissioning of junction box with 100 Amps MCCB, 4-Pole 36kA & rotary operated mechanism, FP spreader with Aluminium bus bar. As per specification.Note:- All MCCB's should be microprocesser based. | 2 Numbers | ₹47,012.28 | ₹94,024.56 |
| Schedule F · Extension and raising of existing Platforms to High Level at Jamalpur Shekhan, Lehra Gaga, and Himmantana. | |||
| 01Supply & recessing/ fixing of PVC conduit pipe conforming to IS 9537 part- III/1983(latest version) with accessories , junction box etc. including making chase , plastering/clamping etc. as per technical spec.i) 25 mm (medium) | 225 Metre | ₹49.38 | ₹11,110.50 |
| 02Supply and drawing of the following Sizes FRLS PVC insulated multi-stranded copper conductor single core flexible cable conforming to IS 694 ( latest version ) in laid (recessed/Surface) MS/PVC/HDG Conduit pipe for wiring of point wiring/circuit wining/Sub main/Main as required & as per explanatory note including drawing, connection testing and commissioning. i) 1.5 sq. mm | 1,200 Metre | ₹17.17 | ₹20,604 |
| 03Supply and drawing of the following Sizes FRLS PVC insulated multi-stranded copper conductor single core flexible cable conforming to IS 694 ( latest version ) in laid (recessed/Surface) MS/PVC/HDG Conduit pipe for wiring of point wiring/circuit wining/Sub main/Main as required & as per explanatory note including drawing, connection testing and commissioning. ii) 2.5 sq. mm | 1,200 Metre | ₹26.86 | ₹32,232 |
| 04Supply and drawing of the following Sizes FRLS PVC insulated multi-stranded copper conductor single core flexible cable conforming to IS 694 ( latest version ) in laid (recessed/Surface) MS/PVC/HDG Conduit pipe for wiring of point wiring/circuit wining/Sub main/Main as required & as per explanatory note including drawing, connection testing and commissioning. iii) 4 sq. mm | 300 Metre | ₹44.40 | ₹13,320 |
| 05Supply & erection of 5 mtrs high hot dip galvanized Octagonal pole with top 70 mm around face bottom 130 mm thick steel base plate size 200X200X12mm complete with appropriate sleeve at the top of pole for following mounting arm bracket 300 mm long suitable foundation and foundation GI nut bolt with washer and smart pack junction box with 6 Amp DP RCBO with 30 mAmp senstivity and terminals and as per explanatory note.i) Single Arm bracket | 22 Numbers | ₹12,353.03 | ₹2,71,766.66 |
| 06Supply & erection of 5 mtrs high hot dip galvanized Octagonal pole with top 70 mm around face bottom 130 mm thick steel base plate size 200X200X12mm complete with appropriate sleeve at the top of pole for following mounting arm bracket 300 mm long suitable foundation and foundation GI nut bolt with washer and smart pack junction box with 6 Amp DP RCBO with 30 mAmp senstivity and terminals and as per explanatory note.ii) Double Arm bracket | 66 Numbers | ₹12,486.27 | ₹8,24,093.82 |
| 07Supply, erection, testing and commissioning of LED street light fitting complete with driver (70 watts) confirming to CEE/NR/121-Elect/PS/2019(Rev-04) dt 04/11/2019 or latest specification and site requirement. in details. Guarantee-05 years from date of commissioning. | 154 Numbers | ₹5,710.84 | ₹8,79,469.36 |
| 08Design, manufacuring, supply, installation, testing & commissioning of astronomical timer switch along with TPN MCB 63A and associated accessories as per details given below: a)Astronomical time switch model SEL-170 top of Indo Asian or equivalent MDS, Legrand,Siemens, L&T, AEG, ABB, b) 65 Amps TP contactor model no LBF650 A or equivalent of L&T,Siemens, ABB, AEG C) TPN MCB 63 Amps d) Accessories like wiring,locks hinges, rubber gasket, nuts & bolts etc. e) MS fabrication box 2 mm CRCA sheet size 17" x 12" x 6" power coated to 50 micron thickness | 3 Numbers | ₹16,844.36 | ₹50,533.08 |
| 09Laying of 2/3/4 core 16/25/35/50/75/95 /120/240/400 sqmm LT UG/XLPE in Trench/Pipe/Cable tray as per site requirement all as specified and as directed. Note:- LT UG Cable will be supplied by the Railways free of cost. However, Contractor has to make own arrangement for shifting the cable to site from the Elect maintenance Depot store. | 5,900 Metre | ₹27.10 | ₹1,59,890 |
| 10Excavation of cable trench by digging 1000 mm deep and then refilling after laying of cable as per IS1255:1983 and technical specification on a cushion of sand 100 mm below and providing protective bricks as per drawing and soil and ramming, levelling and repairing the floor to its original condition. i) Trench width 300 mm wide for laying up to 3 cables with 9 protective bricks per meter. | 3,540 Metre | ₹104.05 | ₹3,68,337 |
| 11Excavation of cable trench by cutting/breaking station platform concrete/pucca floor digging 400 mm deep and then refilling after laying of cable as per IS 1255:1983 and technical specification enclosed on a cushion of sand 100 mm below and providing protective bricks as per drawing and soil and ramming, leveling and repairing and finishing the said portion of platform with 1:2:4 cement concrete mixture 100 mm deep from top. i) Trench width 300 mm wide for laying up to 3 cables with 9 protective bricks per meter. | 2,360 Metre | ₹390.08 | ₹9,20,588.80 |
| 12LT PTTA with IP-65 protection with canopy Junction box -Design, manufacturing, supply, install, testing, erection and commissioning of junction box with 250 Amps MCCB, 4-Pole 36kA & rotary operated mechanism, FP spreader with Aluminium bus bar. As per specification | 8 Numbers | ₹43,427.93 | ₹3,47,423.44 |
| 13"Supply, erection, testing and commissioning of the following double door wall mounted Pre-fabricated L.T. Distribution Boards of approved make & comprising withs per tech specification PCEE /NR PCEE/NR/126-Elect/PS/2019/dt 10.12.19 i. Incoming MCCB 4Pole 125 A 35 KA B/C - 1 No.ii. Outgoing MCB 32 A DP 10 KA B/C- 6 Nos. (2 Nos. on each Phase )" | 3 Job | ₹13,567.06 | ₹40,701.18 |
| 14"Design, supply, installation, testing & commissioning of front operated double door type weather proof feeder pillar (MCCB incoming & MCCB outgoing) comprising with the following MCCB's fixed in it of make Havells, Siemens, L&T, schneider, Legrand or equivalent confirming to IEC 60947-2/IS 13947:2008 & IS 8623:2008 or latest with digital measuring instrument & bus bar arrangement and confirming to PCEE/NR spec. no. 126-Elect./PS/2019 Or latest and as per IS, IR rules and site requirement. 4P MCCB 250A 36kA with adjustable thermal & fixed magnetic release = 01 No. (Incoming)4P MCCB 63A 36kA with adjustable thermal & fixed magnetic release = 04 No. ( outgoing)" | 3 Numbers | ₹95,383.10 | ₹2,86,149.30 |
| 15Supply, installation, testing and commissioning of the following double door wall mounted pre fabricated LT distribution Board of approved make as per spec."i) Incoming MCB TPN, 63 A ,10 KA, (B/C)=01 No.ii)Out going MCB SP 6/32 A 10 KA,(B/C)=18 Nos.(6 Nos on each phase)" | 3 Job | ₹6,186.30 | ₹18,558.90 |
| 16Earthing with 40mm dia. Earth GI pipe class 'B' , 3 meter long, earth electrode as earth per IS:3043 (latest version) to achieve earth resistances less than 5ohms including construction of masonry enclosures with hinged cover plate of cast iron/RCC(Heavy Duty with lifting arrangement) with locking arrangement as required (Outer hole size: 450XmmX450mm and Cover plate(CI/RCC) size:300mmX300mm) on top, provision of earth plate, connections from earth electrode to switch earth gear/pole as per technical Specification/I.E. Rule. | 48 Job | ₹3,139.84 | ₹1,50,712.32 |
| 17Supply & recessing/fixing on surface 6 SWG GI wire for loop earthing as required as per technical specification. | 2,250 Metre | ₹8.64 | ₹19,440 |
| 18Supply , lying of GI pipe class B ISI marked under road, clamping with erected pole or wall as per tech spec for passing cable.50 mm dia | 90 Metre | ₹319.06 | ₹28,715.40 |
| 19Supply and erection of 103 mm inner dia Double walled Corrugated pipe under the railway track/road as per site required. | 1,950 Metre | ₹373.43 | ₹7,28,188.50 |
| 20Excavation and refilling of trench 0.3 Mtr. wide and 0.8 mtrs deep on pitched/stone/brick/ paved surface, road/crossing/platform etc and restoring the surface to its original condition. | 1,950 Metre | ₹149.33 | ₹2,91,193.50 |
| 21Boring & laying of power cables by trenchless method through HDPE pipe along with supply and insertion of HDPE pipe of PE 80 PN 8 grade of 90 mm dia with min. 6.7 mm and max. 7.6 mm wall thickness as per IS:4984-95 in the bore for the laying of power cables under the track of road. HDPE pipe is to be supplied by the contractor. The power cables will be supplied by railway. | 300 Metre | ₹1,209.74 | ₹3,62,922 |
| 22Dismentling/ cutting of rail/tubular poles after dismentling the overhead conductor/ fitting and staking of poles within 1km area as per site requirement. | 30 Job | ₹908.80 | ₹27,264 |
| 23Supply,erection,testing and commissioning of LED tube light fittings 20 Watt complete as per specification of CEE/NR/121-Elect/PS/2018 dt 28/06/18 or latest. Guarantee-05 years from date of commissioning. | 105 Numbers | ₹608.53 | ₹63,895.65 |
| 24Supply of batten/ angle holder/ ceiling rose & installation on the junction box of laid conduit including connection, testing & commissioning as per tech. spec.i) Bakelite ceiling rose 3 plate | 150 Numbers | ₹19.89 | ₹2,983.50 |
| 25Design, manufacture,display, installation of wall / hanging / floor mounting type LED illuminated sign /direction boards in half elliptical shape.The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness.The text / graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed / router cut on monomeric calendered vinyl of 70 um thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site equirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided. | 150 Square Foot | ₹3,029.38 | ₹4,54,407 |
| 26Erection and installation of wall / hanging / floor mounting type LED illuminated sign / direction boards in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed / router cut on monomeric calendered vinyl of 70 um thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided. | 150 Square Foot | ₹303.04 | ₹45,456 |
| Total | ₹1,75,52,591.69 | ||
The total matches the advertised value.
Documents
12 files- PDFNotice inviting tenderviewNitPdf_5553840.pdf (opens in a new tab)
- PDFHQ letter for inspectionAmbiguityininspectionclausesinElectricalWorksContract..pdfNo direct link in the notice; see the notice, page 19
- PDFTender documentTenderDOCT9.pdfNo direct link in the notice; see the notice, page 19
- PDFAnnexure AAnnexure-APartnershipRetirementEmployes.pdfNo direct link in the notice; see the notice, page 19
- PDFAnnexure XXIVAnnexureXXIV.pdfNo direct link in the notice; see the notice, page 19
- PDFAnnexure XXIV AAnnexureXXIVA.pdfNo direct link in the notice; see the notice, page 19
- PDFCEE specLatestCEESpec_compressed1.pdfNo direct link in the notice; see the notice, page 19
- PDFGeneral conditions of contractGCCwithcorrectionsliplatest_compressed.pdfNo direct link in the notice; see the notice, page 19
- PDFCorrection slip latestGCCACS11_compressed.pdfNo direct link in the notice; see the notice, page 19
- PDFJPO digging workRevisedinstructionforundertakingworksnearcables_compressed2.pdfNo direct link in the notice; see the notice, page 19
- PDF5 Mtr pole drawingPoledrawing5meter.pdfNo direct link in the notice; see the notice, page 19
- PDFAnnexure-V(A)Annexure-V(A).pdf (opens in a new tab)
Documents to submit
Commercial-Compliance
- Document optional
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
- Document required
The tenderers shall submit a copy of certificate stating that all their statements/documents submitted alongwith bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-XXIV. Non submission of above certificate by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
- Document required
Please provide details of banks account no. of the firm for ECS payment required for necessary payments record as per Annexure-XII of Northern Railway Standard Tender Document 2022.
- Document required
Please provide details of PAN no. (Self attested copy should be uploaded)
- Document required
Please provide details of your GSTIN No. (Self attested copy should be uploaded).
Technical-Compliances
- Document required
Test of Responsiveness Please refer clause 3.8 of Northern Railway Standard Tender Document 2022 and submit Tender form-1.
Show all 13
- Document required
Please provide full details of constitution of the firm/Company/Society/Proprietor etc. as per clause 3.1 & 3.7 of Northern Railway Standard Tender Documents 2022.
- If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of/by a Sole Proprietorship Firm/Partnership firm/Registered Company etc. then tender shall be treated as having been submitted by the individual who has signed the tender.
- After opening of the tender, any additional document pertaining to the constitution of Sole Proprietorship Firm/Partnership Firm/Registered Company/Registered Trust/ Registered Society/HUF etc. shall be neither asked nor considered, if submitted.
- Document required
The Tenderer(s) should submit Power of Attorney for Authorized Signatory as per Tender form-3 of Northern Railway Standard Tender Document 2022. Note: Power of Attorney is mandatory in case of partnership firm/LLP/Company/ Registered Society & Registered Trust Society & in case of sole Proprietorship firm if it want to act through agent. (In other case it is optional)
- Document optional
In case Bid Security is submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be in favour of Sr. Divisional Finance Manager/ Northern Railway /Ambala as per Annexure-VIIA and shall be valid for a period of 90 days beyond the bid validity period. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days before closing date for submission of bids(i.e. excluding the last date of submission of bids). For details, refer clause 3.3 of Standard Tendered Document-2022 and GCC 2022 Advance Correction slip No.2 dt.13.12.2022.
- Document required
The Tenderer(s) should submit self-attested copy of certificate as per Tender form-2 of Northern Railway Standard Tender Document 2022.
- Document required
Tenderes are compulsorily required to upload undertaking (attached as Annexure-A) regarding Employment /Partnership of Retired Railway Employees attached as Annexure'A'. Otherwise the tenderer will give full information as to the date of retirement of such Engineer or gazetted officer from the said service and as to whether permission for taking such contract, or if the Contractor be a partnership firm or an incorporated company, to become a partner or director as the case may be, has been obtained by the tenderer or the Engineer or officer, as the case may be from the President of India or any officer, duly authorized by him in this behalf, shall be clearly stated in writing at the time of submitting the tender. Note:- Tenders without undertaking or required information shall be summarily REJECTED.
- Document required
STARTUPS Any firm recognized by Department for Promotion of Industry and Internal Trade (DIPP) as 'Startups' shall be exempted from payment of Bid Security on submission of registration certificate issued by appropriate authority. Refer to Note ( ii) of clause 5 of Part-I of GCC-2022. Note: The firm has to mandatorily submit certificate issued by DIPP otherwise offer shall be SUMMARILY REJECTED.
- Document required
The tenderers shall submit a copy of certificate stating that all their statements/documents submitted along with bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-XXIV.In addition to Annexure-XXIV, in case of other than Company/Proprietary firm, Annexure-XXIV(A) shall also be submitted by the each member of a partnership firm/Joint Venture(JV)/Hindu Undivided Family(HUF)/Limited Liability Partnership(LLP)etc.as the case may be. Non submission of above certificate by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document. NOTE: Submission of copy of certificate as per Annexure-XXIV is not mandatory if the bidder has confirmed and certified the same online at the time of submission of bids
Eligibility
Standard Financial Criteria
- Document required
Financial Eligibility Criteria Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of rupees. N= Number of years prescribed for completion of the work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Detail instructions as per clause 3.5.3 & 3.5.6 of Standard Tender Document-2022
Special Technical Criteria
- Document required
The tenderer must hold a valid Electrical Contractor's License in thename of the participating firm/company, as required under IE Rules1956, Clause 45. Any offer not meeting this requirement shall besummarily rejected. Relevant supporting documents must be submittedalong with the tender. It shall be the sole responsibility of the contractorto comply with all statutory obligations, including liaising with Stateauthorities and obtaining necessary permissions to execute works acrossdifferent states,if work is awarded.
Standard Technical Criteria
- Document required
Technical Eligibility Criteria (a)The Tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: -
- Three similar works costing not less than the amount equal to 30% of advertised value of the tender, or
- Two similar works costing not less than the amount equal to 40% of advertised value of the tender, or
- One similar work costing not less than the amount equal to 60% of advertised value of the tender. NOTE: - •The Tenderer(s) should submit self-attested copy of work Completion certificate issued by competent authority should mandatorily mention Name of work, name of agency, Contract agreement detail, date of completion, Completed Cost of work, Nature of firm (Partnership/Proprietorship) and details of its constituents, if any, PAN/GSTIN etc so that evaluation may be done accordingly.
- Document optional
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificate issued by any Govt. Organization, work experience certificate issue by Public listed company having average annual turnover of Rs. 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated /registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Detail instructions as per clause 3.5 & 3.6 of Standard Tender Document- 2022
Defination of Similar Work Wiring/Rewiring in buildings with associated electrical works. OR Lighting arrangement in buildings, circulating area, yard, street etc. with associated electrical works. OR Wiring/Rewiring, Lighting arrangement in buildings with associated electrical works.
Partnership firm/Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.
Please submit a certificate in the prescribed format (please download the format from the link given below). Non submission of the certificate, or submission of certificate either not properly filled in, or in a format other than the prescribed format shall lead to summary rejection of your offer. ( Click here to download the Format of Self Certification)
Check each criterion against the tender notice before you bid.
Commercial conditions
- EMD
- ₹351,100
- Tender fee
- None
Terms & conditions
25 conditionsGeneral Instructions
Quantity of items may be decreased or increased as per site requirement:-
- For increase in quantity the payment will be made to the bidder as per GCC 2022 or latest.
- The quantity mentioned against the items if decreased on the basis of requirements as per site then payment will be made to the bidder only for the quantity that has been executed at site.
- The tenderer has to quote his rates keeping this in view.
Please read all uploaded documents carefully like tender document with special tender conditions and technical specs etc., before submission of bid.
Tenderer must ensure that his offer complies with Public Procurement Policy Order 2017 dated 15/06/2017.
The Tenderer will be deemed to visit the site and inspected the same to acquaint itself about all the existing site conditions, Laws and regulations before submitting his/their Tender. Once the Tender is submitted no Tenderer will be permitted to withdraw his/their Tender on the ground of any alleged defect in the site or its conditions. All the contents of the Tender should be typed or hand written in indelible blue ink and signed by Tenderer/authorized signatory of the Tenderer who shall also initial each page in Blue ink. The Tenderer requirement in the Tender, for authorizing the signatory to commit the Tenderer. The power of attorney must include the specimen signature of the authorized signatory duly attested by authorized person under applicable laws.
Contractors will have to upload details of their LoAs, engaged workmen, wage payment details, PF/ESI details, bonus details etc., on website www.shramikkalyan.indianrailways.gov.in on monthly basis. (Railway Board' s letter No. 2018/CE-I/CT/4 dated 17.10.2018)
It is mandatory to update labour & other details on Railways Shramik Kalyan Portal within 15 days of issue of LOA for approval by this office.Moreover,as per Railway board letter no.2018/CE-I/CT/4 dt.17.10.2018,It shall be mandatory upon the contractor to ensure correct and prompt uploading of all salient details of engaged contractual labour & payments made thereofafter each wage period.Further, while processing payment contractor shall submit a certificate that "I have uploaded the correct details ofcontract labours engaged in connection with this contract and payments made to them during the wage period in Railway 's Shramikkalyan portal at 'www.shramikkalyan.indianrailways.gov.in' till Month, Year."
The tenderer shall submit along with the tender document, documents in support of his/their claim to fulfill the eligibility criteria as mentioned in the tender document. Each page of the copy of documents/certificates in support of credentials, submitted by the tenderer, shall be self-attested/digitally signed by the tenderer or authorized representative of the tendering firm. Self attestation shall include signature, stamp and date (on each page). Only those documents which are declared explicitly by the tenderer as "documents supporting the claim of qualifying the laid down eligibility criteria", will be considered for evaluating his/their tender
The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the railway there under.
In case of any wrong information submitted by tenderer, the contract shall be terminated, Bid security, Performance Guarantee (PG) and Security Deposit (SD) of contract forfeited and agency barred for doing business on entire Indian Railways for 2 (two) years.
Care in Submission of Tenders Please refer to clause 3.0 of Northern Railway Standard Tender Document 2022
Show all 25
Tenderers will examine the various provisions of The Central Goods and Services Tax Act, 2017(CGST)/ Integrated Goods and Services Tax Act, 2017(IGST)/ Union Territory Goods and Services Tax Act, 2017(UTGST)/ respective state's State Goods and Services Tax Act (SGST) also, as notified by Central/State Govt. & as amended from time to time and applicable taxes before bidding. Tenderers will ensure that full benefit of Input Tax Credit (ITC) likely to be availed by them is duly considered while quoting rates.
The successful tenderer who is liable to be registered under CGST/IGST/UTGST/SGST Act shall submit GSTIN along with other details required under CGST/IGST/UTGST/SGST Act to railway immediately after the award of contract, without which no payment shall be released to the Contractor. The Contractor shall be responsible for deposition of applicable GST to the concerned authority.
In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/ SGST Act, the railway shall deduct the applicable GST from his/their bills under reverse charge mechanism (RCM) and deposit the same to the concerned authority.
Mandatory updation of Labour data on Railway's shramikkalyan portal by Contractor.For details refer clause 5.4 of Northern Railway Standard Tender Document 2022
In addition to General condition of contract 2022 and Northern Railway Standard Tender documents, special condition attached shall also apply.
The quantities given above are approximate and can be increased/decreased as per extant rules.
The GST Act 2017 will be applicable as per extant policy as notified by Central/State Govt. and as amended from time to time. All the bidders/tenderers should ensure that they are GST compliant and their quoted rates are inclusive of taxes and GST.
No Post Tender correspondence for submission of additional documents shall be entertained after opening of the Technical & Commercial offers. Even suomoto post tender letters of the tenderers shall be treated as NULL & VOID. (Authority HQ Letter No. 74-W/O/Pt.XXV/WA/Loose dated 07.04.15).
The contract will be governed by Indian Railways Standard General Conditions of Contract updated with correction slips issued up to date of inviting tender or as otherwise specified in the tender documents.
All Annexure should be uploaded in Standard format as prescribed in Standard Tendered Document-2022.
Undertakings by Partnership Firm- In case the Letter of Acceptance (LOA) is issued to a partnership firm, the undertakings as per clause 10 of Annexure -VIII of Northern Railway Standard Tender Document 2022 shall be furnished by all the partners through a notarized affidavit, before signing of contract agreement.
Fraud & Corrupt Practice Please refer to clause 3.10 of Northern Railway Standard Tender Document 2022.
Conditional offer and Alternative proposal by Tenderer Tenderers shall submit offers that fully comply with the requirements of the Tender documents including the conditions of contract, design and specification requirements if any. Conditional offer or alternative offers will not be considered in tender evaluation and will be summarily rejected. The Tenderer shall have no claims in this regard whatsoever. "Any unconditional rebate offered by the tenderer should be mentioned on of 'Schedule of Quantities' specifically. To attract the rebate mentioned each page of schedule may refer the note for the conditional rebate mentioned in the end. Any rebate mentioned at any other place in tender document shall not be considered. The unconditional rebate mentioned in "Scheduled of Quantities" shall be considered while evaluation of bid." mentioned in the end. Any rebate mentioned at any other place in tender document shall not be considered. The unconditional rebate mentioned in "Scheduled of Quantities" shall be considered while evaluation of bid."
The tenderer shall ensure that the proper social distancing is maintained while execution of work besides following all the guidelines issued by Ministry of Health and Ministry of Railways in regard to COVID-19 pandemic.
Technical-Compliances
Tenderer shall quote his rates ensuring minimum wages criteria with GST
Bidder declarations (17)
Undertakings
I/We have read and make myself/ourselves fully conversant regarding all the tender conditions, specification of the said work as per Standard Tender Document, specification/conditions of this tender and agree to abide by the said conditions.
Until a formal agreement is prepared and executed, acceptance of this tender shall constitute a binding contract between us subject to modifications, as may be mutually agreed to between us and indicated in the letter of acceptance of my/our offer for this work.
I/We also hereby agree to abide by the Indian Railways Standard General Conditions Of Contract, with all correction slips up-to- date and to carry out the work according to the Special Conditions of Contract and Specifications of materials and works as laid down by Railway in the annexed Special Conditions/ Specifications, Schedule of Rates with all correction slips up to date for the present contract.
The amount as stipulated in tender document is herewith forwarded as Bid Security. Full value of the Bid Security shall may get forfeited without prejudice to any other right or remedies in case my/our Tender is accepted as per direction of Engineer and if : -I/We do not execute the contract documents as stipulated in performance guarantee clause of GCC as detailed in general instructions. -I/We do not commence the work within Fifteen days after receipt of orders to that effect.
I/We hereby Confirm that the rates, rebates and/or other financial terms, if any, quoted by us in the relevant fields of the Financial Bid page will only be the ruling terms for deciding the inter-se ranking, and any such condition having financial repercussions, if quoted by us anywhere else including attached documents shall not be considered for deciding inter-se ranking. However, Railways shall have the right to incorporate any such condition quoted by us, in the contract, at their discretion, if contract is placed on us.
I/We have submitted self-attested/digitally signed in the prescribed format for verification/confirmation of the documents submitted for compliance of eligibility/qualifying criteria.
I/we have visited the works site and I/We am /are aware of the site conditions.
Certifications
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
Similar open tenders
Soonest first- 4 daysleftProvision of Relay Hut for Gate Signallig at Non Interlocked L-xing gates over Ambala Div…Ministry of Railways · Closes 19 Oct 2026
- 6 daysleftElectrical work for - (A)Interlocking of LC Gates NC-7, NC-8 & NC-75 having TVU>10,000 al…Ministry of Railways · Closes 21 Oct 2026
- 7 daysleft(1) Construction of Relay Hut at Non-Interlocked LC gates having TVU-10000 over Nagpur di…Ministry of Railways · Closes 22 Oct 2026
- 8 daysleftProvision of Relay Hut for Gate Signalling at Non Interlocked L-xing gates over Ambala Di…Ministry of Railways · Closes 23 Oct 2026
- 13 daysleftElectrical work for - (A)Interlocking of Non-interlocked LC Gates KR-4 & GCF-63 having TV…Ministry of Railways · Closes 28 Oct 2026
- 18 daysleftProvision of Relay Hut at (7 Nos Level crossings) for Gate Signalling at Non Interlocked…Ministry of Railways · Closes 2 Nov 2026
- 18 daysleftProvision of Relay Hut at (6 Nos Level crossings) for Gate Signalling at Non Interlocked…Ministry of Railways · Closes 2 Nov 2026
- 20 daysleftA-Electrical work in c/w Interlocking of 4 No s manned L-Xing gates in c/w raising of sec…Ministry of Railways · Closes 4 Nov 2026
Search similar in the explorerFind this tender in the explorer