Browse all bids
eProcureOpenWorks

Balance Works in connection with Development of Amrit Stations at Kundaharnamganj, Unchahar & Zafarabad including Construction of Station Buildings, Circulating Area and Parking, New High Level Platf…

Ministry of Railways

DRM Office, Northern Railway Hazaratganj, Lucknow Lucknow

Delivers to

Lucknow, Uttar Pradesh

Overview

23 facts from the tender

Ministry of Railways published this works tender on eProcure on 12 Oct 2026, for Lucknow, Uttar Pradesh. The estimated value is ₹45 Cr and the EMD is ₹90 L. It closes on 6 Nov 2026, 3:00 pm IST. Tender ID 92424460 · Ref 05-DyCE-GSU-NR-LKO-26-27.

Timeline

  1. Published12 Oct 2026 · 5:15 pm
  2. Closes6 Nov 2026 · 3:00 pm

Bidding

Bid type
Open/Advertised
Contract type
Works - General · Expenditure
Tender type
Open
Tendering section
LKO, BSB
Bidding system
Two Packet System
Bidding style
Single Rate for Each Schedule
Validity of offer
90 days
Completion period
12 Months
Tender document cost
None
JV / consortium
JV allowed (up to 3 members), no consortium
Ranking order
Lowest to Highest
Expenditure type
Capital (Works)
Pre-bid meeting
None

Buyer

Inviting authority
LUCKNOW/NR/DIVISION-GATI SHAKTI/NORTHERN RLY
Organisation type
Central Govt. Ministry/Department
Product category
Railway related Products
Location
Lucknow, Uttar Pradesh · the inviting office's place
Portal location
New Delhi · as listed on eProcure
Portal
eProcure
Inviting officer
CPM/GS/LKOLUCKNOW/NR/DIVISION-GATI SHAKTI/NORTHERN RLY

Important dates

Published
12 Oct 2026, 5:15 pm IST
Bidding starts
23 Oct 2026
Closes
6 Nov 2026, 3:00 pm IST

Declarations by the buyer

  • Complies with the Public Procurement (Make in India) Order 2017
  • The tender inviting authority confirms this tender does not violate the GFR rules on procurement through GeM
  • Bidders from a country sharing a land border with India must be registered with the competent authority

Schedule of work

98 items
ItemQuantityRailways’ estimated rateAmount
Schedule A · All items of DSR 2021 (inclusive all taxes)
1All items of Chpater 02: Earth Work"Escalation -11.54%₹2,65,74,250.91
2All items of Chapater 04 " Concrete Work"Escalation -11.54%₹2,66,45,492.17
3All items of Chapter 5 "Reinforced cement concrete"Escalation -11.54%₹18,52,35,383.31
4All items of Chapter 6.0 MASONRY WORKEscalation -11.54%₹1,84,02,079.48
5All works of Chapter 8.0 CLADDING WORKEscalation -11.54%₹30,55,733.93
6All items of Chapter-09 "Wood and PVC Work" of DSR-2021Escalation -11.54%₹87,18,620.70
7All items of Chapter-10 "Steel Work" of DSR-2021Escalation -11.54%₹2,78,12,581.66
8All items of Chapter-11 "Flooring Work" of DSR-2021Escalation -11.54%₹3,79,69,043.58
9All items of Chapter-12 "Roofing Work" of DSR-2021Escalation -11.54%₹1,03,00,483.20
10All items of Chapter-13 "Finishing Work" of DSR-2021Escalation -11.54%₹85,63,772.79
11All items of Chapter-14 "REPAIRS TO BUILDING Work" of DSR-2021Escalation -11.54%₹8,603.44
12All items of Chapter-15 "Dismantling & Delmolishing Work" of DSR-2021Escalation -11.54%₹31,75,802.46
13All items of Chapter-16 "Road Work" of DSR-2021Escalation -11.54%₹3,12,10,240.47
14All items of Chapter-17 "Sanitary Installation Work" of DSR-2021Escalation -11.54%₹15,68,498.63
15All items of Chapter-18 "Water Supply Work" of DSR-2021Escalation -11.54%₹79,46,233.53
16All items of Chapter-19 "Drainage Work" of DSR-2021Escalation -11.54%₹10,71,770.30
17All items of Chapter No.21 Aluminium Work of DSR-2021Escalation -11.54%₹2,41,002.19
18All items of Chapter-22 "Water Proofing Work" of DSR-2021Escalation -11.54%₹9,96,601.42
19All items of Chapter-25 "Structural Glazing Aluminium Composite Panel Work" of DSR- 2021Escalation -11.54%₹12,33,419.90
20"All items of Chapter-26 ""NEW TECHNOLOGIES ANDMATERIALS"" of DSR-2021"Escalation -11.54%₹32,19,709.58
Schedule B · All DSR 2020 Horticulture Items (Inclusive of All Taxes)
1CHAPTER 2.0:HORTICULTURE AND LAND SCAPINGEscalation -11.54%₹2,23,049.24
2Chapter 3.0 FOLIAGE AND SHADE LOVING PLANTSEscalation -11.54%₹99,013.28
3Chapter 4.0 SEASONAL PLANTSEscalation -11.54%₹2,44,852.86
4Chapter 9.0 CREAPER PLANTSEscalation -11.54%₹30,518.70
5Chapter 10.0 ANNUAL FLOWER SEEDLING/CUTTINGEscalation -11.54%₹3,14,077.23
Schedule C · All Items of USSOR-2021 (inclusive of all taxes)
1Chapter-21 Miscellaneous itemsEscalation 5.36%₹9,17,953.74
Schedule D · All NS items (NS-01 to NS 15) Inclusive all taxes.
1All NS items (NS-01 to NS-16)₹2,66,20,024.02
Schedule E · Details of All NS Items(Inclusive of all taxes)
1NS items (NS-17 & NS-18)₹-12,20,430
Schedule F · All Electrical(General) SOR Items (Inclusive all taxes)
1Supply and recessing/fixing of PVC conduit pipe with accessories, junction box etc. including making Chase, plastering /clamping etc as. Per technical specification. PVC conduit pipe conforming to IS 9537 part III/1983 (Latest Version) (i) 25 mm (medium)Escalation 124.81%7,000 Metre₹31₹4,87,837.70
2Supply of Batten /Angle Holder/Ceiling rose and installation on the Junction Box of laid conduit including connections, testing and commissioning. as per technical specification. (a) Bakelite batten holderEscalation 124.81%50 Numbers₹10₹1,124.05
3Supply of Batten /Angle Holder/Ceiling rose and installation on the Junction Box of laid conduit including connections, testing and commissioning. as per technical specification. (b) Bakelite ceiling rose 3 plate.Escalation 124.81%1,200 Numbers₹11₹29,674.92
4Supply, erection, testing and commissioning of iron clad plug socket 20 Amps with SP MCB 20 Amps and metal clad plug top 20 Amps as per technical specification.Escalation 124.81%20 Numbers₹539₹24,234.52
5Earthing with 40mm dia GI pipe class 'B' 3 meter long earth electrode as per IS: 3043 (latest version) to achieve earth resistance less than 5 ohms including construction of masonry enclosures with hinged cover plate of cast iron with locking arrangement (approx. size 400mmx400mm) on top, provision of earth plate, connections from earth electrode to switch gear/pole as per drawing.Escalation 124.81%70 Numbers₹883₹1,38,955.06
6Laying, underground/road/Railway track, recessing in platform /wall along with Rly. Track/in laid RCC/GI pipe as required 1.1 KV grade LT XLPE insulated armoured, aluminum conductor cable including making chase & plastering after laying of cable/digging of cable trench, sand cushioning, protective covering with second class bricks, provision of cable route marker as per Tech. Specfn. including end terminations with Alu. Crimping socket/lugs, testing & commissioning of following sizes:- Up to 25 sq. mm.Escalation 124.81%6,000 Metre₹30₹4,04,658
7Laying, underground/road/Railway track, recessing in platform /wall along with Rly. Track/in laid RCC/GI pipe as required 1.1 KV grade LT XLPE insulated armoured, aluminum conductor cable including making chase & plastering after laying of cable/digging of cable trench, sand cushioning, protective covering with second class bricks, provision of cable route marker as per Tech. Specfn. including end terminations with Alu. Crimping socket/lugs, testing & commissioning of following sizes:- Above 25 sq. mm to 120 sq. mmEscalation 124.81%6,000 Metre₹31₹4,18,146.60
8Laying, underground/road/Railway track, recessing in platform /wall along with Rly. Track/in laid RCC/GI pipe as required 1.1 KV grade LT XLPE insulated armoured, aluminum conductor cable including making chase & plastering after laying of cable/digging of cable trench, sand cushioning, protective covering with second class bricks, provision of cable route marker as per Tech. Specfn. including end terminations with Alu. Crimping socket/lugs, testing & commissioning of following sizes:- Above 120 sq. mm.Escalation 124.81%1,200 Metre₹31₹83,629.32
9Supply and laying of G.I pipes class B ISI marked under road/clamping with erecting pole or wall as per technical specifications and drawing for passing cable of following sizes:- 63 mm diaEscalation 124.81%200 Metre₹201₹90,373.62
10Supply and laying of G.I pipes class B ISI marked under road/clamping with erecting pole or wall as per technical specifications and drawing for passing cable of following sizes:- 100 mm diaEscalation 124.81%200 Metre₹291₹1,30,839.42
11Supply, erection/fixing of safety items Complete with Fire Extinguisher, dry chemical powder type (ISI marked) suitable for electric fire 10 Kgs. Capacity - 2 Nos. Rubber Mat (ISI marked) non-skid type suitable for 11 KV AC supply of size 3600x1000x25mm - 2 Nos. GI Fire buckets, 24 gauge fitted on steel stand as per approved drawing, each 10 Ltr. Capacity filled with clean dry ordinary sand. - 6 Nos. First Aid Box complete with medicines of approved make - 1 No. Electric shock treatment chart (Larger size) with Aluminum frame and glass on front or laminated as approved. - 2 Nos. 11 KV/415 Volt danger plates conforming relevant IS. - 8 Nos. Schematic diagram of HT/LT installation on white hylem sheet with aluminum frame. Approximate size 1200x600 mm. - 1 No. Data's of transformer on white Hylum sheet with Aluminum Frame as approved. Approximate size 900x600mm. - 2 NosEscalation 124.81%8 Set₹9,650₹1,73,553.32
12Supply and recessing/fixing on surface 6 SWG GI wire for loop earthing as required as per technical specification.Escalation 124.81%2,000 Metre₹5₹22,481
Schedule G · All Electrical (General) NS Items (Inclusive all taxes)
1Supply of following sizes FRLS PVC insulated multi stranded copper conductor single core cable conforming to IS 694 (Latest Version), and drawing in Laid (recessed /surface) M.S/PVC conduit pipe for wiring of point wiring/circuit wiring /sub main/main as required as per technical specification including connections, testing and commissioning. 1.0 sq mm6,000 Metre₹9.70₹58,200
2Supply of following sizes FRLS PVC insulated multi stranded copper conductor single core cable conforming to IS 694 (Latest Version), and drawing in Laid (recessed /surface) M.S/PVC conduit pipe for wiring of point wiring/circuit wiring /sub main/main as required as per technical specification including connections, testing and commissioning. 1.5 sq mm8,000 Metre₹14.80₹1,18,400
3Supply of following sizes FRLS PVC insulated multi stranded copper conductor single core cable conforming to IS 694 (Latest Version), and drawing in Laid (recessed /surface) M.S/PVC conduit pipe for wiring of point wiring/circuit wiring /sub main/main as required as per technical specification including connections, testing and commissioning. 2.5 Sq mm7,000 Metre₹20.77₹1,45,390
4Supply of following sizes FRLS PVC insulated multi stranded copper conductor single core cable conforming to IS 694 (Latest Version), and drawing in Laid (recessed /surface) M.S/PVC conduit pipe for wiring of point wiring/circuit wiring /sub main/main as required as per technical specification including connections, testing and commissioning. 4.0 Sq mm3,000 Metre₹29.03₹87,090
5Supply of following sizes FRLS PVC insulated multi stranded copper conductor single core cable conforming to IS 694 (Latest Version), and drawing in Laid (recessed /surface) M.S/PVC conduit pipe for wiring of point wiring/circuit wiring /sub main/main as required as per technical specification including connections, testing and commissioning. 6.0 Sq mm2,000 Metre₹57.79₹1,15,580
6"Supply,errection, testing and commissionning of modular metal boxes concealedboards with white finish single mounting plate and fixing of switches/plug socket , fan regulators and connection to wiring, metal boxes boards are to be concealed in the wall of following sizes- 4 module"80 Numbers₹174.67₹13,973.60
7"Supply,errection, testing and commissionning of modular metal boxes concealedboards with white finish single mounting plate and fixing of switches/plug socket , fan regulators and connection to wiring, metal boxes boards are to be concealed in the wall of following sizes- 6 module"120 Numbers₹252.46₹30,295.20
8"Supply,errection, testing and commissionning of modular metal boxes concealedboards with white finish single mounting plate and fixing of switches/plug socket , fan regulators and connection to wiring, metal boxes boards are to be concealed in the wall of following sizes- 8 module"60 Numbers₹297.11₹17,826.60
9"Supply,errection, testing and commissionning of modular metal boxes concealedboards with white finish single mounting plate and fixing of switches/plug socket , fan regulators and connection to wiring, metal boxes boards are to be concealed in the wall of following sizes- 12 module"80 Numbers₹397.10₹31,768
10Supply , errection, testing and commissioning of modular snap type switches/ plug/socket and fan regulator on the recessed modular boxas per Tech. Specification. 6/10 ampere switch300 Numbers₹99.69₹29,907
11Supply , errection, testing and commissioning of modular snap type switches/ plug/socket and fan regulator on the recessed modular boxas per Tech. Specification. 6/10 ampere multi sockets, 5 pin with safety shutter200 Numbers₹132.76₹26,552
12Supply , errection, testing and commissioning of modular snap type switches/ plug/socket and fan regulator on the recessed modular boxas per Tech. Specification. 20 ampere one way switch80 Numbers₹139.05₹11,124
13Supply , errection, testing and commissioning of modular snap type switches/ plug/socket and fan regulator on the recessed modular boxas per Tech. Specification. 16 & 6 Amp twin sovket heavy duty with safety shutter80 Numbers₹226.98₹18,158.40
14Supply , errection, testing and commissioning of modular snap type switches/ plug/socket and fan regulator on the recessed modular boxas per Tech. Specification. modular rotary step fan regulator100 Numbers₹410.20₹41,020
15Supply, Installation, testing, commissioning of (18-20 Watt) LED tube light fitting, 1200 mm, LED Make: NICHIA/OSRAM/SAMSUNG/ LUMILEDS/SEOUL, Normal Voltage : 230 V AC ±5% , 50 Hz , Confirming to PCEE/NR's spec. No. CEE/NR/121-Elect/PS/2018 (Rev- '3') dated 28.06.2018 or latest & PCEE/NR's spec. No. PCEE/NR/121-Elect/PS/2019 (Rev- '4') dated 04.11.2019 or latest.500 Numbers₹639.30₹3,19,650
16"Design, Manufacturing, supply, fixing, testing and commissioning of single sided "" 3D"" character Back lit LED type Signage (station name board) as per CEE/NR Specification no.CEE /NR/ 121-Elect /PS /2017 Rev 2 dated 26.09.17.2017 and technical scope of work.Note:-Static/Single sided board of different size and message are required. Prior approval of message colour and size to be taken from competent authority."400 Square Foot₹2,197.52₹8,79,008
17Supply erection testing and commissioning of Facade lighting with controller andaccessories.Details as per teecnical scope of work2 Set₹19,05,099.70₹38,10,199.40
18Fixing ,testing and commissioning of light fitting/ ceiling fan/ exhaust fan300 Numbers₹68.59₹20,577
19Supply, erection, laying, connection and commissioing of GI Strip 25x5 mm (galvanized) conforming to relevant IS) as per IS 3043/1987 (Latest Version) 300 mm deep in ground/recessing in floor as required and as per explanatory note200 Metre₹79.92₹15,984
20Fabrication, supply and installation of Perforated GCGI tray of size 300mm wide x 75mm deep x 1.6mm thich including horizontal and vertical bends, reducers, tees, cross members and other accessories duly galvanized and supporting/mounting with piller/angle stracture/wall as required at site and as per explanatory note.450 Metre₹891.64₹4,01,238
21Supply, erection, testing and commissioning of 20 Amps AC box with 1 no 25A motor starter switch ( modular type ) and 1 no 16/20/25/32A SPN RCBO for power supply to Air Conditioner.20 Numbers₹3,841.78₹76,835.60
22"Supply, fixing, testing and commissioning of 1200 mm sweep AC ceiling fan, 230 Volt Single phase 50 Hz, Confirming to PCEE/NR's spec. No. CEE/NR/123-Elect/PS/2018 dated 15.10.2018 complete with capacitor, double ball bearing , shackle, canopy, without regulator as per site condition and technical scope of work. (Make:- Havells, Bajaj, CGL, Usha)."300 Numbers₹2,407.11₹7,22,133
23Supply,installation ,testing & commissioning of single phase propeller type ventilating fans (Exhaust fans) number of poles:4, sweep size in mm 300 etc.including grouting of MS nuts,bolts and connection, as required as per site.30 Numbers₹2,297.11₹68,913.30
24Supply,installation ,testing & commissioning of industrial type ventilating/Exhaust fan 380 mm sweep complete in all respect as per specifcation and as per site requirment, including grouting of nut,bolt. washer and with the help of suitable size of fasteners conforming to IS: 2312 (latest).30 Numbers₹3,172.66₹95,179.80
25Supply fixing testing and commissioning of Heavy duty wall mounted air circulator fan 600 mm (24 inch), 1440 RPM ,180 watt, Air delivery- 270 cubic meter per minute, No of blade 3, single speed, suitable to work on 230 Volts 50 HZ, single phase .10 Numbers₹5,695.02₹56,950.20
26Execution of trenches with horizontal boaring (HDD work boaring size upto 125mm) at the depth of minimum one meter from the ground level at locations as per direction of site engineer / incharge. This include supply and laying of DWC HDPE pipe as specification no. IS-14930 pt-II or latest of 120 mm OD / 103mm ID, DWC pipe to be provided at stating bore and at end of bore upto max fisibility for horizontal bore. (Note : Cable will be supplied by the Railway from Store of SSE/Elect).3,000 Metre₹481.01₹14,43,030
27"Supply of HDPE (High Density Poly Ethylene polymers) pipe of Material Grade- PE 63 grade, IS 4984 Resistance to chemicals- Exceptional resistance to all external and internal corrosion. Resistant to electrolytic corrosion.Working pressure in KGF/CM²)Specified base density- 940 to 958 kg/mtr3, Size-Supply of HDPE pipe outer diameter 63 mm, wall thick Min. 3.0mm & Max 3.5 mm"300 Metre₹132.17₹39,651
28"Supply of HDPE (High Density Poly Ethylene polymers) pipe of Material Grade- PE 63 grade, IS 4984 Resistance to chemicals- Exceptional resistance to all external and internal corrosion. Resistant to electrolytic corrosion.Working pressure in KGF/CM²)Specified base density- 940 to 958 kg/mtr3, Size-Supply of HDPE pipe outer diameter 110 mm, wall thick Min. 5.3mm & Max 6.1 mm"800 Metre₹400.18₹3,20,144
29Supply, making, testing and commissioning of LT straight through joint (Jointing Kit ) upto the size of 400 sq.mm 2/3.5/4 core LT XLPE cable as required as per site and as per instruction of site engineer.60 Numbers₹4,951.89₹2,97,113.40
30Supply, erection, testing and commissioning of End termination of 2.0 C / 4.0 C X 70- to 240 sq. mm. LT XLPE cable as per specification. (One set means lugs in R-Y-B-N)40 Set₹374.93₹14,997.20
31Supply, erection, testing and commissioning of ISI marked stationary vertical vented type water heater conforming to IS 2082/1993 with amendment Material of inner container :- copper, capacity :- 25 Ltrs, 1500 Watt, Pressure :- 60N/sq cm, Class - I, complete with element, thermostat etc. and suitable for operation on 240 Volt, single phase AC, 50 Hz supply, BEE:- star rating 3 or above, Make :- M/s SAAHAS, M/s Havells, M/s Bajaj, M/s Usha , M/s Crompton.6 Numbers₹7,298.16₹43,788.96
32"Supply, Provision, testing & commissioning of Concentric pipe electrode type maintenance free earthing, with primary MS pipe 40 mm dia. 3000 mm long & secondary MS pipe 80mm dia. 3000mm long, class B class ISImark confirming to IS:1239 including digging pit of size 5 feet X 5 feet X 10 feet and using enhancement chemical compound minimum 75 kgs. Suitable for 40 kA current carrying capacity having less than 1 Ohm earth resistance as per RDSO specification No. RDSO/PE/ SPEC/PS/0/09 (Rev.0-2008) or latest"20 Numbers₹11,069.04₹2,21,380.80
33Erection testing andcommissioning of 6 mtr height single arm decorative GI polewith cast aluminium armsincluding 1 nos 80W tear drop pendant LED fitting along with foundation as per manufacturer's design complete Note: Poles will be supplied by Railway70 Numbers₹3,000₹2,10,000
34Erection testing andcommissioning of 6 mtr height double arm decorative GI polewith cast aluminium armsincluding 2 nos 80W tear drop pendant LED fitting along with foundation as per manufacturer's design complete. Note: Poles will be supplied by Railway30 Numbers₹3,200₹96,000
35Supply erection testing and commissioning of out door type distribution box complete with 4 nos Aluminium bus bars 250A capacity fabricated with 14 SWG MS sheet steel, dust and vermin proof.10 Numbers₹4,877.15₹48,771.50
36Erection, testing, and commissioning of 5 meter high hot dip Galvanized octagonal pole with longitudinal seam weld throughout the length with bottom 130 mm across face, top 70 mm across face made of 3 mm thick high tensile plate and 200 mm X 200 mm X 12 mm base plate complete with two arm of 300 mm for fitting installation and 04 No. M20 (EN 8 Gr) X 700 mm long J type foundation bolt set complete with washer and smart pack junction box with suitable single pole MCB & terminal as per explanatory note. Note: Octagonal Poles will be supplied by Railway60 Numbers₹2,057.02₹1,23,421.20
37Supply, Installation, testing, commissioning of self contained drinking water cooler of storage & Cooling capacity 150 liters, operation on 230 Volt AC, 50 Hz with 'Eco' friendly refrigerant (Non CFC Refrigerant), Energy Efficient Compressor including electric, water connection and earthing etc conforming to IS: 1475 (part-1); 2001 (reaffirmed 2007) or latest and as per site requirement. The work includes necessary masonary work for making foundation for keeping water cooler one feet above the floor level.6 Numbers₹51,294.81₹3,07,768.86
38Supply erection fixiing testing and commissioing of 4 way double door MCB distribution box along with 1x125 Amp 3 pole MCCB 35 KA, 12x6-32 Amp single pole MCB10 KA as per requirment complete in all respect.12 Numbers₹13,963.51₹1,67,562.12
39Supply, erection, fixing, testing and commissioning of floor mounted LT panel fitted with incoming of 1X400 Amp MCCB 35 KA FP with bus coupler outgoing of 3 X 250 Amp with Amp meter, Volt Meter and indicators. Make of MCCB & MCB of M/s Legrand, GE, L&T, Havells, Schneider.Indoasian or equivalent4 Numbers₹1,13,676.86₹4,54,707.44
40Supply, erection, testing and commissioning of 1400 VA inverter, A.C. input voltage 160V-280V, DC input voltage 24V, output voltage same as supply voltage, when inverter is working 220V +(-) 10%, output frequency 50 +(-) 0.5%, output wave form: square wave, back up full load: upto 3 hours 25% load upto 7 hours, wiring with 6 nos light and fan point, Protection: over load battery over charge battery deep discharge, Battery charge: constant current thyristor controlled for extra wide range. Supply and erection of 150 Amp Hour LMLA tubular battery complete in all respect as per above specification6 Job₹27,750.30₹1,66,501.80
41Supply, installation, testing & commissioning of Automatic electronic Voltage Stablizer for air conditioner unit upto 2 Ton capacity , 5 KVA , digital display, wall mounted, input voltage range 150 volt - 230 volt AC, 50 Hz Single Phase, Low cutout/High Voltage cutout-120 Volt/300 Volt AC . Make:- LIVGUARD , V-GAURD , MICROTEK10 Numbers₹6,215.12₹62,151.20
42Installation of split air conditioner as per explanatory note.10 Job₹1,857.09₹18,570.90
43One Job consists of dismantling of one Rail pole / Tubular pole by digging / cutting from the ground level (min 450 CM) including over head conductor, bracket, insulators , earth wire ,guard wire etc.50 Numbers₹1,008.26₹50,413
44Supply, fixing, testing & commissioning of LED light fitting square, 35-40 watt, 2 feet x 2 feet, recessed/surface mounted fitting , CRI 70 colour temperature 4000-6500 K, THD<30% power factor >0.90, lumen output 3300 Im, Confirming to CEE/NR Specification no CEE/NR/121- Elect/PS/2018(Rev-3) dated 28.06.2018 & PCEE/NR's spec. No. PCEE/NR/121-Elect/PS/2019 (Rev- '4') dated 04.11.2019 or latest.120 Numbers₹5,211.85₹6,25,422
45Supply, fixing, testing & commissioning of LED light 15 watt downlighter, recessed/ surface mounted fitting, CRI 65, IP-20 or better, power factor 0.90, Cool white, integeral driver, die cast aluminium housing,of suitable size complete in all respect confirming to CEE/NR Specification no CEE/NR/121-Elect/PS/2018(Rev-3) dated 28.06.2018 & PCEE/NR's spec. No. PCEE/NR/121- Elect/PS/2019 (Rev- '4') dated 04.11.2019 or latest.180 Numbers₹1,660.75₹2,98,935
46Transpotaion of Material from Railway Store to site by Truck20 Per Trip₹15,375.74₹3,07,514.80
47Dismantling of old wiring LP/FP/fitting/board etc & depositing to conern Rly store.350 Numbers₹256.30₹89,705
48Excavation of wall and fixing of cable with cement plastering200 Metre₹75.60₹15,120
Schedule H · All TRD SOR 2020 ITEMS (Including of all taxes @ 18%)
1Section-I (General Supply)Escalation 155.07%₹51,672.08
2Section-1 (General Erection)Escalation 151.59%₹2,19,469.50
3Section-2 (Concrete) SupplyEscalation 260.03%₹4,62,278.52
4Section-2 (Concrete erection)Escalation 259.37%₹1,22,042.05
5Section-3 (Ferrous) SupplyEscalation 166.27%₹25,19,633.13
6Section-3 (Ferrous) ErectionEscalation 158.81%₹2,38,827.28
7Section-4 (Non ferrous) SupplyEscalation 162.8%₹3,090.53
8Section-4 (Non ferrous) ErectionEscalation 156.9%₹2,425.14
9Section-5 (Insulator) SupplyEscalation 153.03%₹1,02,987.97
Schedule I · All NS items of TRD (inclusive of all taxes)
1All NS items (Inclusive of all taxes)₹2,46,234.10
Total₹44,97,87,173.83

Bids quote a percentage above, below or at par with these rates · The total matches the advertised value.

Documents

4 files

Documents to submit

Commercial-Compliance

  • The tenderers must necessarily upload/submit the legal documents, pertaining to the constitution of their Concern as applicable, along with the tender, as enumerate in clause 2.4 of special tender condition and instruction to tenderers of tender document

    Document required
  • Annexure-Q is to be submitted/uploaded at the time of tendering. If Annexure-Q is not submitted/uploaded at the time of tendering, then the same shall be submitted after issue of LOA and before signing of the Contract Agreement.

    Document optional
  • Submit your bank details i.e. Name of the Bank along with Bank Branch Code, Account Number, IFSC Code as per Annexure-J (Real Time Gross Saving (RTGS)/National Electronic Fund Transfer (NEFT) (Model Mandate Form)) of tender document.

    Document required
  • The tenders confirms the option of taking payment through LC arrangement. The tenderer affirms having read over and agreed to the terms and conditions of the LC option

    Document optional
  • Tenderer shall certify that they are not black listed or debarred by Railways or any other Ministry/ Department/PSU (Public Sector undertaking) of the Govt. of India/State Govt. from participation in tenders/contract on the date of opening of bids either in their individual capacity or as a member of the JV firm in which they were/are members

    Document required
  • Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

    Document optional
Show all 11

Technical-Compliances

  • Tenderers are required to fill up/submit requisite details in prescribed proforma of Annexure F (LIST OF ENGINEERs/PERSONNEL ALREADY AVAILABLE/PROPOSED TO BE EMPLOYED FOR DEPLOYMENT ON THIS WORK) of tender document without which the offer is liable to be rejected

    Document required
  • Tenderers are required to fill up/submit requisite details in prescribed proforma of Annexure E (DETAILS OF PLANT AND MACHINERY ALREADY AVAILABLE WITH FIRM) of tender document without which the offer is liable to be rejected

    Document required

Custom

  • Mandatory details to be filled in by Tenderer while submitting their offer as per ANNEXURE-D (Constitution of firm) of tender document.

    Document optional
  • Detail instruction as per relevant clause of tender document Annexure-N & H (Both duly certified by chartered Accountant

    Document required
  • The Tenderer shall have a valid Electrical Contractor's License issued in the name of the firm by State/ Central Government andshall furnish/attach all the particulars of the Electrical license along with their offer.ORThe tenderer shall make a formal Agreement with suitable Electrical Contractor (who will work as sub-contractor of the tenderer for execution of electrical portion of work, in case contract is awarded to him), holding a valid Electrical Contrctor's license issued in his/her name by State/ Central Government. The tenderer shall submit a formal agreement duly notarized, legally enforceable in the Court of Law, between main contractor and sub-contractor for the electrical component of work proposed to be executed by the sub-contractor along with valid Electrical contractor's License of sub-contractor. The tenderer shall attach all the particulars of the electrical license along with their offer.(ii)In case the tenderer is a partnership firm, the electrical contractor license shall be either in the name of partnership firm or in thename of any of the constituent partners of such partnership firm. In case the contractor is a JV, the electrical contractor's licenseshall be either in the name of JV or in the name of any constituent partners of such JV. In case one of the constituent of JV firm is apartnership firm, the electrical contractor license shall be either in the name of partnership firm or in the name of any of theconstituent partners of such partnership firm. The tenderer shall attach all the particulars of the electrical license along with theiroffer

    Document required

Eligibility

Standard Financial Criteria

  • The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less, where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-I, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.

    Document required

Special Technical Criteria

  • Definition of Similar nature of work Any Civil Engineering works

    Document required

Standard Technical Criteria

  • The tenderer must have successfully completed or substantially completed any of the following (From Govt. Organisation) during last 07 (seven) years, ending last day of the month previous to the one in which tender is invited. Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender.

    Document required

Partnership firm/Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.

  • Please submit a certificate in the prescribed format (please download the format from the link given below). Non submission of the certificate, or submission of certificate either not properly filled in, or in a format other than the prescribed format shall lead to summary rejection of your offer. ( Click here to download the Format of Self Certification)

Check each criterion against the tender notice before you bid.

Commercial conditions

EMD
₹8,995,800
Tender fee
None

Terms & conditions

Bidder declarations (10)

Certifications

  • I/we the tenderer (s) am/are signing this document after carefully reading the contents.

  • I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.

  • I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.

  • I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.

  • I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.

  • I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.

  • I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.

  • I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.

  • I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.

  • I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)

Similar open tenders

Soonest first

Search similar in the explorerFind this tender in the explorer

Tender notice (PDF)