Browse all bids
eProcureOpenWorks

Electrification work in connection with following, Sch. A :- Construction of Officers Rest House in connection with Kumbh Mela 2027 at Nashik. Sch. B :- Construction of 200 bedded male barrack with b…

Ministry of Railways

Office of the Sr.DEE/G/BSL, DRM Office Building Bhusawal

Delivers to

Bhusawal, Jalgaon, Maharashtra

Overview

23 facts from the tender

Ministry of Railways published this works tender on eProcure on 12 Oct 2026, for Bhusawal, Jalgaon, Maharashtra. The estimated value is ₹2.3 Cr and the EMD is ₹4.6 L. It closes on 4 Nov 2026, 3:00 pm IST. Tender ID 92711002 · Ref BSL-L-W-T-86-2026.

Timeline

  1. Published12 Oct 2026 · 5:36 pm
  2. Closes4 Nov 2026 · 3:00 pm

Bidding

Bid type
Open/Advertised
Contract type
Works - General · Expenditure
Tender type
Open
Tendering section
ELECT.GEN.
Bidding system
Single Packet System
Bidding style
Single Rate for Tender
Validity of offer
60 days
Completion period
6 Months
Tender document cost
None
JV / consortium
Not allowed
Ranking order
Lowest to Highest
Expenditure type
Capital (Works)
Pre-bid meeting
None

Buyer

Inviting authority
BHUSAWAL DIVISION-ELECTRICAL/CENTRAL RLY
Organisation type
Central Govt. Ministry/Department
Product category
Railway related Products
Location
Bhusawal, Jalgaon, Maharashtra · the inviting office's place
Portal location
Mumbai CST · as listed on eProcure
Portal
eProcure
Inviting officer
Sr.DEE/Gen/BSLBHUSAWAL DIVISION-ELECTRICAL/CENTRAL RLY

Important dates

Published
12 Oct 2026, 5:36 pm IST
Bidding starts
21 Oct 2026
Closes
4 Nov 2026, 3:00 pm IST

Declarations by the buyer

  • Complies with the Public Procurement (Make in India) Order 2017
  • The tender inviting authority confirms this tender does not violate the GFR rules on procurement through GeM
  • Bidders from a country sharing a land border with India must be registered with the competent authority

Schedule of work

186 items
ItemQuantityRailways’ estimated rateAmount
Schedule A · Part I :- LT Panels, Cables, Air conditioning, etc.
1SETC of 192 Litres 5 star direct cool single door Refrigerator conforming to IS : 1476 latest for direct cool with ISI mark.₹5,97,800
2"Supply, Erection, Testing and Commissioning of ARC Fault detection device (AFDD) AFDD with MCB (In accordance with IEC 62606 & IEC 60898 - 1) 32 A Combined 1P+N MCB + AFDD with metal enclosure."₹12,056
3Supply, Erection, Testing and Commissioning of ARC Fault detection device (AFDD) AFDD with MCB (In accordance with IEC 62606 & IEC 60898 - 1) 40 A Combined 1P+N MCB + AFDD with metal enclosure.₹12,353
4Supply, Erection, Testing and Commissioning of ARC Fault detection device (AFDD) AFDD with RCBO (In accordance with IEC 62606 & IEC 61009-1) 16 A Combined 1P+N RCBO + AFDD and Metal Enclosure.₹14,414
5SETC of Outdoor type LT Panel as per IEC 61439 with double door powder coated with locking aragnements consisting 1 Nos X 200A 4P MCCB for I/c and 5 Nos x 63A 4P MCCB, 12 Nos X 16A 2P RCBO & 3 Nos X 32/40 2P RCBO for O/G with ELR & CBCT for each MCCB communicable Multifunction meter, indication lamp, copper busbar, & other assocciate aceesories. All MCCB are Microprocessor based (completely wired with suitable communication cable to fetch data from each compartment functional Unit (ACB/MCCB/SFU etc) / Multifunction Meter) and other accessories.₹6,05,982
6Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 25 to 50 sq mm., with necessary material as per specification₹6,544
7Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 70 to 95 sq mm., with necessary material as per specification₹9,046
8Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 120 to 185 sq. mm., with necessary material as per specification₹9,472
9Providing & erecting epoxy outdoor / indoor end termination kit for LT XLPE armoured cable 25 to 50 sq mm., with necessary material as per specification₹5,090
10Providing & erecting epoxy outdoor / indoor end termination kit for LT XLPE armoured cable 70 to 120 sq mm., with necessary material as per specification₹5,664
11Supply of 4 core 25 sqmm armoured XLPE Cable.₹24,400
12Supply of LT XLPE Armoured 4 Core 50 Sqmm Aluminium cable as per relevant IS.₹45,100
13Supply of 4 Core 70 Sqmm armoured LT XLPE Cable.₹51,900
14Supply of 4 core 120 Sqmm armoured LT XLPE cable ISI mark.₹1,00,100
15Trenching & refilling of LT/HT/ Various sizes of PVC / XLPE cables- Along the Road (Size - 900mm x 300mm)₹11,550
16Digging of cable trench 300/450 mm x 1000 mm in RCC/PCC/hard soil & refilling as per specification and requirement at the site.₹20,050
17Transportation, Laying, Installation, terminating, testing and commissioning of LT/HT cable of sizes 10 sqmm to 400 sqmm in existing trench, pipe or on structure.₹3,100
18Erection,testing and commissioning of cables other than trench i.e.Wall/Truss including clamp, GI wire and hardware₹21,600
19Supply & laying of GI pipe Class B, ISI marked under road /Clamping with erecting pole or wall as per technical specification & drawing for passing cable.₹2,020
20Supply,installation, testing & commissioning of HDPE Pipe 110 mm Nominal Dia as per IS-4984-1995.₹5,000
21Supply and laying of RCC half round pipe 150 mm ID & 1 mtr length.₹5,400
22Supply and laying of RCC Hume Pipe of size 6"(150mm) dia 2 mtr. Length.₹2,265
23Supply, erection of RCC Type cable route marker with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.₹1,497
24Supply & Erection of RCC Warning Cover and refilling the cable trench in an approved manner.₹2,365
25Supply, fabrication, fixing and erection of MS Work of miscellaneous size and for cable tray etc. including painting complete.₹5,264
26Supply, erection, testing & commissioning of maintenance free earth as per RDSO specification no. RDSO/PE/SPEC/ PS/0109-008(REV '0') with improved earthing enhancing compound and exothermic welding₹1,52,190
27Supply, fabrication, laying welding and connection of GI Flat of size 25x3 mm from earth pit with GI nut Bolt suitable size.₹11,400
28Providing & erecting Hot dipped Galvanised Perforated type cable tray manufactured from 16 SWG (1.6 mm thick) Gl sheet of 300 mm width & 100 mm height comprising all required standard accesssories.₹53,300
29Supply of all material,excavation and casting of cement concrete foundation/concreting in ratio 1:3:6 for above work.₹61,280
30Supply of 200 watt LED flood light fitting input voltage 140-270V, 130 lumen / watt, IP - 66.₹38,368
31Supply,installation, testing & commissioning of 5 Mtr long hot dip galvanised octagonal pole with 130 mm bottom & 70 mm top made up of 3mm thick steel sheet along with bracket (Single/Double arm as per site requirement), internal wiring, base plate of size 200x200x12mm with foundation.(Along with 2 pole RCBO 6A, with 30 mA sensitivity).₹31,804
32Supply, erection, testing & commissioning of LED street Light Roadway fittings in aluminium PDC housing, toughened glass cover with IP66 protection, Wattage 45 watts, input voltage-240 volts ac, 50Hz. Complete.₹9,658
33Supply, erection, testing & commissioning of LED street Light Roadway fittings in aluminium PDC housing, toughened glass cover with IP66 protection, Wattage-72 watts, input voltage-240 volts ac, 50Hz. Complete.₹11,000
34Supply, replacement, fixing, testing, connecting and commissioning of 60 Watt or above LED inverter street lights fittings with PDC housing, IP 66 and inbuilt battery backup with auto ON/OFF and dimming option (Dimming 50% on battery backup) and backup of upto 3 to 4 hrs. LED Luminaries:-(1) A complete LED lighting unit consisting of a light source and driver together with parts of distribute lights, to position and protect the light source, and to connect the light source to a branch circuit.The light source itselfmay be an LED array and LED module, or an LED lamp.(2):- SuppliedLED luminaries shall confirm toIS: IS:16101(2012) IS:16106(2012).Light Source(LED) in the Luminaries should be ofmake:- (1):-NICHIA/ CREE/OSRAM/ SEOUL/ PHILIPS/LUMILEDS/ LEDNIUM.(2):- LEDs to IS:16105(2012)IS:10322.IS:16108(2012),IS:10322,IEC:62471.TypeLED:- High power LED,SMD(Surface Mounting device).1.Inputoperating voltage :-105-295 V AC.2:- Normal Voltage- 220VAC,3.Driver type: constant current driver with short circuit protection. 4.LED life:- >50000 burning hours .5.Depreciation:- 30%max.after 50000 burning hours.6.Control of distribution:-Full cut off.7.Surge protection:4KV (internal)+10KV(External Surge protectiondevice) .8.Drive component :Industrial grade only.9.Efficiency ofdriver electronic: > 85%.10.Beam angle:>=140 degree along withroad and &>=80 degree across the road.11.Colourtemperature:5000-6500K.12.Colour renderingindex(CRI):>=75.13.Ingress protection :IP-66.14.Lumen output:>120 lumens/watt.15.Power factor:>;0.95. 16.Total hormonicsdistrotion(THD):-<15%.17.Lamp cover :Toughened glass or UVstabilsed poly carbonate.18.Finishing:Power coated/Anodized.19.Secondry optics:poly corbonate reflector/ polycarbonates lens.20.Construction of housing: extrudedaluminum/CRCA/Pressure die cast aluminum.21.Mounting:Suitablefor existing pole/Truss/Lantern mounted.22.Certificate:Firm tosubmit LM80(In respect of LED used)& LM79(In respect of luminareused) test certificate from National/International accreditedLaboratory and OEM certificate for compliance ofBIS/IEC.23.Warranty:Firm to submit warranty certificate for five yearalong with the supply.All fittings should be embossed/sticker withmanufacturing date and warranty details at time of supply.20.Theweight of fixture should be standard for better heat resistance of LEDPCB.All fittings shall be fitted with new suitable bend/elbow withclamp and proper nut and bolt and connection with twisted twinflexible cord of minimum size 16/1 mm copper conductor as perrelevant technical specification. Materials prameters must remainunchanged during entire warranty period.Inspection by- RITES.₹7,369
35Supply, erection, testing & commissioning of self contained drinking water cooler unit energy efficient compressor IS mark suitable for operation on 230 V +10 % 50 cycle single phase Ac supply storage capacity 150 Ltr cooling capacity 150 Ltr/Hr complete in place of old one as per specification.₹69,000
36Supply, erection, testing and commissioning of 40 KVA online type UPS having three phaseinput and three phaseoutput, IGBTtechnology and withinbuilt isolationtransformer 480 VDCincluding alteration to existing wiring withswitches, socket,changeover etc, if any,required at site forinstalling the UPS.Make APC, NUMERIC,₹6,50,000
Schedule A · Part II - Air Conditioning
1Supply, erection, testing & commissioning of All Inverter based variable refrigerant flow system type (VRF) Air Conditioners Out Door Units, Top Discharge, Cap 22.0 HP complete with all accessories₹9,54,302
2Supply, erection, testing & commissioning of variable refrigerant flow system type (VRF) Wall Mounted Air Conditioners In Door Units With Cord less remote, Cap 1.57 TR complete with all accessories.₹6,87,125
3Supply, erection, testing and commissioning of Ref joints for Indoor Units₹1,44,126
4Supply, erection, testing and commissioning of Hard Copper refrigerant piping of suitable sizes for pair of gas (suction) &liquid, with 19/13 mm Closed Cell Insulation for Wrapping the copper pipe lines. The Piping system must be supported atspecific distance.₹1,49,544
5Supply & erection of 3 core x 2.5 Sq mm armoured copper Cable.₹4,960
6Supply, erection, testing & commissioning of Power Copper Cable armoured Size 4x10 sqmm₹30,784
7Drain piping in hard PVC with all fittings, supports and clamps. The piping shall be suitably insulated with 9mm thick closedcell foam Class O (Nitrile Rubber) stuck with approved adhesive compound. (25/50mm dia as per site requirement)₹18,000
8Supply, installation, testing and commissioning of Refrigerant Gas for Top up (refrigent as per requirement at site)₹40,896
9Supply, fabrication, fixing and erection of MS Work of miscellaneous size and for cable tray etc. including painting complete.₹5,264
10Providing & erecting Hot dipped Galvanised Perforated type cable tray manufactured from 16 SWG (1.6 mm thick) Gl sheet of 300 mm width & 100 mm height comprising all required standard accesssories.₹51,328
11Supply, erection, testing and commissioning of PVC drain pipe 2 Inch (50 mm)₹16,120
12Supply, erection, testing & commissioning of 32 mm Hard PVC Drain Piping with 9 MM insulation.₹19,896
13Supply, erection, testing & commissioning of 1.5 Sq mm copper conductor sheilded cable for 4 core for power supply cabling, valves and flowmeter including lugs, glands and termination.₹4,960
14Supply of material and fixing and concealed power point wiring 20A DP MCB complete with 4 Sqmm PVC insulated copper conductor wires along with 14SWG tinned copper earth wire in 25/32mm dia PVC conduit pipe flush type 5/15A socket outlet and15A piano type switch in GI box with PVC topsheet 5 mm thick for AC..(along with the all accessories and including cutting the wall / ceiling / chipping and re plastering, distempered / painted as the case may be, the same as good condition as directed by Engineer in charge at site)₹22,500
15Supply, erection, testing & commissioning of maintenance free earth as per RDSO specification no. RDSO/PE/SPEC/ PS/0109-008(REV '0') with improved earthing enhancing compound and exothermic welding₹75,065
Schedule B · Part I : Solar Water heater, Geyser, Water cooler, High Mast, Garden Light and its acessories
1Supply, Installation, testing & commissioning of Solar water heater 500 LPD Capacity with Evacuated tube technology (ETC) complete with stainless steel water tank, mounting structure and fixing hardware conforming to MNRE specification with thermostatic controlled electric heating facility.₹4,72,000
2Supply, fixing and connection of PVC tank 500 ltrs. cap. with stand as per specification.₹13,788
3Supply and fixing of cold water pipe line GI pipe 25 mm "B" class as per specification.₹74,500
4Supply and fixing of Hot water pipe line GI pipe 15 mm "B" class, GI pipe line,insulated with PUF,PVC pipe encased, including all accessories, and Gun metal valve on out going side and Nickel plated approved type taps for each outlets, for above Solar Water Heater systems.₹1,30,900
5Supply, erection, testing & commissioning of self contained drinking water cooler unit energy efficient compressor IS mark suitable for operation on 230 V +10 % 50 cycle single phase Ac supply storage capacity 150 Ltr cooling capacity 150 Ltr/Hr complete in place of old one as per specification.₹3,37,875
6Supply, erection, testing & commissioning of 7 Mtr high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation.(Along with 2 pole RCBO 6A, with 30 mA sensitivity).₹2,29,110
7Supply of Insulation paint and painting of Octagonal poles / tubular poles/High Mast with 03 coats of insulation paint so as to achieve 05 KV insulation. The work also includes cleaning and scrubbing of pole before application of paint. Upon testing no leakage current should be found upon the painted surface₹47,000
8Supply of Insulation tape and application of the insulation tape on Octagonal poles / tubular poles/High Mast so as to achieve 05 KV insulation. The work also includes cleaning and scrubbing of pole before application of paint. Upon testing no leakage current should be found upon the painted surface. {1 Per Unit = 1 Roll of 5.0 CM (Width) x 33 M (Length)}₹5,210
9Supply, erection, testing & commissioning of LED street Light Roadway fittings in aluminium PDC housing, toughened glass cover with IP66 protection, Wattage 45 watts, input voltage-240 volts ac, 50Hz. Complete.₹1,44,870
10Supplying, fixing and commissioning 2 pole RCBO up to 25A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30 mA sensitivity and short circuit and earth leakage trip indication as per specification₹56,265
11Supply, erection, testing, commissioning of outdoor type feeder pillar board comprising of 400A FPMCCB complete with HRC Fuse base and Cartridge consists of aluminium bus bar 500V complete erected in 14 gauge CRCA sheet box with supporting angles, self-locks, gasket and slanting top to be erected on provided foundation₹1,21,542
12Supply, erection, testing & commissioning of 20 Mtr. High Mast lighting tower with foundation alongwith 9x150 watt LED fittings complete with all accessories.₹10,22,256
13Supply, erection, testing & commissioning of Garden light 8W 4000 K (500 mm) IP 65 LED LigHT₹1,53,930
14Supply, erection, testing & commissioning of 2 core 10 sqmm al armoured XLPE Cable.₹25,500
15SETC of PVC insulated & sheathed 3 core flexible copper cable size 0.75 sq mm₹19,200
16Supply, erection, testing & commissioning of PVC Flexible pipe 1/2 Inch₹12,600
17Supply & erection of FRP junction box of size 300 x 200 x125 mm, 2.7 mm thick, complete mounted on rail / tubular pole with clamps and required accessories.₹21,000
18Supply, erection, testing & commissioning of electric water heater/ geyser Cap- 15 Liters 230 V 50 Hz AC Input-2 KW(Glass Coated Heating Element, inner tank made up of mild steel with blue diamond glass lining tank,Tempratue range:- 25-75 Deg Cent., BEE 5 STAR RATING, with wireless remote control.₹1,21,815
19Supply, erection, testing & commissioning of energy efficient 1x18 W indoor fitting LED batten with extruded aluminium housing with integrated LED Driver/Tube complete and associated accessories complete.₹36,400
20Supply, erection, testing and commissioning of 2x20 Watts LED surface/suspended water proof industrial luminaries with polycarbonate housing and diffuser₹74,800
21Supply, erection, testing & commissioning of 2Ft 10 watt LED tube 4000 k all in one fixtures for Dressing, mirror and kitchen.₹22,320
22Supply, erection, testing and commissioning of BLDC Super efficient electrical Ceiling Fan 1400 mm sweep (56') 260-280 RPM, Services value 7.7 input voltage 140-285 V. Power consumption 26 W to 30 W. Air delivery 270 CMM or more, 3 blades with double ball bearing with regulator of electronic step type and down rod 300-600 mm as per requirement, canopies, shackle.₹6,31,040
23Supply, fixing, testing &commissioning of energy efficient BLDC motor industrial exhaust fan of size 300 mm (12") sweep and standard accessories, as per specifications in Annexure II. (Minimum Warrantee - 2 years)₹1,31,820
24Providing and erecting Air circulator 600 mm sweep oscillating type, wall mounting 1440 RPM without speed regulator, overheat protection unit, totally enclosed, flame proof motor suitable for 230/250 Volts single phase, 50 cycles A.C. supply, core lead wire and with moisture proof treatment to winding and with 'E'class insulation complete.₹71,640
Schedule B · Part II : Cables and Erection, Panels etc
1Supply of 4 core 25 sqmm armoured XLPE Cable.₹1,95,200
2Supply of LT XLPE Armoured 4 Core 50 Sqmm Aluminium cable as per relevant IS.₹3,18,400
3Supply of 4 Core 70 Sqmm armoured LT XLPE Cable.₹4,15,200
4Supply of 4 Core 95 Sqmm armoured LT XLPE Cable.₹5,80,800
5Supply of 4 core 120 Sqmm armoured LT XLPE cable ISI mark.₹8,00,800
6Supply of 4 core 185 Sqmm armoured XLPE Cable.₹5,12,000
7Trenching & refilling of LT/HT/ Various sizes of PVC / XLPE cables- Along the Road (Size - 900mm x 300mm)₹6,33,000
8Digging of cable trench 300/450 mm x 1000 mm in RCC/PCC/hard soil & refilling as per specification and requirement at the site.₹1,84,000
9Transportation, Laying, Installation, terminating, testing and commissioning of LT/HT cable of sizes 10 sqmm to 400 sqmm in existing trench, pipe or on structure.₹1,05,000
10Erection,testing and commissioning of cables other than trench i.e.Wall/Truss including clamp, GI wire and hardware₹72,000
11Supply & laying of GI pipe Class B, ISI marked under road /Clamping with erecting pole or wall as per technical specification & drawing for passing cable.₹10,100
12Supply,installation, testing & commissioning of HDPE Pipe 110 mm Nominal Dia as per IS-4984-1995.₹25,000
13Supply and laying of RCC half round pipe 150 mm ID & 1 mtr length.₹3,10,400
14Supply and laying of RCC Hume Pipe of size 6"(150mm) dia 2 mtr. Length.₹3,775
15Supply, erection of RCC Type cable route marker with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.₹14,970
16Supply & Erection of RCC Warning Cover and refilling the cable trench in an approved manner.₹14,190
17Suppy of Polyolefin cable channel of size width 240/340 mm,height 155/230 internal/external length 1 meter produced of polylefin with fire protection class K-1 in accordance with DIN 53438 Sch. IIchannel attachable to each other with male female swallowtail connectors and having suitable detachable cover.₹17,930
18SETC of Outdoor type LT Panel as per IEC 61439 with double door powder coated with locking aragnements consisting 1 Nos X 400 A 4P MCCB for I/c and 4 Nos x 250 A 4P MCCB, 2 Nos x 200 A 4P MCCB, 4 Nos x 125 A 4P MCCB, 4 Nos x 63 A 4P MCCB for O/G with ELR & CBCT for each MCCB, Power qaulity analyzer, Communicable 3ph KWH meter, Multifunction meter, indication lamp, copper busbar, & other assocciate aceesories. All MCCB are Microprocessor based (completely wired with suitable communication cable to fetch data from each compartment functional Unit (ACB/MCCB/SFU etc) / Multifunction Meter) and other accessories.₹9,68,283
19SETC of Outdoor type LT Panel as per IEC 61439 with double door powder coated with locking aragnements consisting 1 Nos X 250 A 4P MCCB for I/c and 3 Nos x 63 A 4P MCCB, 6 Nos x 32 A 4P MCB for O/G with ELR & CBCT for each MCCB, Power qaulity analyzer, Communicable 3ph KWH meter, Multifunction meter, indication lamp, copper busbar, & other assocciate aceesories. All MCCB are Microprocessor based (completely wired with suitable communication cable to fetch data from each compartment functional Unit (ACB/MCCB/SFU etc) / Multifunction Meter) and other accessories.₹3,95,667
20Supply, erection, testing & commissioning of 70%-30% Lighting panel consisting of the following items: One No. of 3-pole power contactor MNX 70 (Make : L&T, BCH, Siemens), One No. of Electronic timer 120 DT( Make : L&T, BCH, Siemens), One no. of 3 pole MCB 63 A, Two nos. of terminal 4-way ( Make : Indigenous ), One No. of Auto / Manual switch (Make : Indigenous), One No. of push to on switch ( Make: Indigenous ) ,One no. of MS BOX with powder coated paint size500mm x 350mm x150mm(make : Indigenous), One no. of plug type relay 2CO-230V ( Make : PLA, LA, L&T ) with fixing material and fixing charge per panel.₹73,524
21Supply, erection, testing & commissioning of Shock safe PRCD plug , 16 A plug with in-built RCD, 16 A, 30 mA, IEC 61540, 230 V 50 Hz, IP 40, with 3 No of terminals, Earth leakage protection,Auto trip & visual indication of Power, Power indicator for on / off status,Built in TEST & RESET Buttons₹4,575
22Providing & erecting epoxy outdoor / indoor end termination kit for LT XLPE armoured cable 2.5 to 16 sq mm., with necessary material as per specification₹21,020
23Providing & erecting epoxy outdoor / indoor end termination kit for LT XLPE armoured cable 25 to 50 sq mm., with necessary material as per specification₹25,450
24Dismantling of cables with accessories.₹1,79,525
25Dismantling of existing main Boards, panels, wires, cables etc addition and alterartion in existing arrangement with associated accessories.₹26,493
26"Dismantling and Cutting the existing RSJ, Tabular, Rail Pole provided on road along with transportation of released pole to nearest OSM depot."₹4,895
Schedule B · Part III : Borewell Submersible pump, its panel and acessories etc
1Supply, erection, testing and commissioning of Borewell Submersible pump set alongwith wet type squirrel cage induction motor of 10 HP for discharge cap. 6000 LPH at 160 - 170 mtr head with allaccesssories₹68,982
2Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c.Submersible/ centrifugal pump set upto 20 HP consisting of Star Delta starter having relay range 13-21 Amp, S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof encloser with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase inbalance etc.₹14,490
3Supply, erection, testing & commissioning of Pump guard Current operated type Should have protection against dry run, single phase, over load, over voltage, under voltage, reverse phase protection etc. (OR ) pump up to 20 HP three phase suitable to operate in 415 volts 50 HZ AC supply. (BSL-1, NK-1)₹2,111
4Supply, erection, testing & commissioning of Heavy duty Sluice Valve 50 mm dia. as per IS specification.₹4,795
5Supply, erection, testing & commissioning of Heavy duty Non Return Valve 50 mm dia. as per IS specification.₹4,534
6Supplying and installing cast iron foot valve ball type/flap type of size 50-80 mm dia with strainer for negative suction as per specification.₹5,495
7Supply and erecting ISI mark " C " Class (Heavy Duty) GI pipe of 50 mm dia. with coupling/accesories.₹1,92,800
8Supply, erection, testing & commissioning of GI C- class Bend 50mm dia.₹669
9Supply, erection, testing & commissioning of M.S. supporting clamps for 50 mm dia GI pipe₹548
10Supply, erection, testing & commissioning of Flat Flexible Copper cable, 3 core X 4 sq.mm for submersible pump & starter connection.₹35,800
11Supply, fabrication, fixing and erection of MS Work of miscellaneous size and for cable tray etc. including painting complete.₹5,350
12Supply, fabrication, laying welding and connection of GI Flat of size 25x3 mm from earth pit with GI nut Bolt suitable size.₹22,800
13Supply, erection, testing & commissioning of maintenance free earth as per RDSO specification no. RDSO/PE/SPEC/ PS/0109-008(REV '0') with improved earthing enhancing compound and exothermic welding₹2,25,195
Schedule C · Electrification work in connection with provision of Escalators (UP / Down) on PF-02 at Malkapur Railway Station.
1Supply, erection, testing and commissioning of Point wiring for light, fan, exhaust fan in PVC casing capping with 2x2.5 sq. mm. FRLS multistranded PVC copper wire alongwith all accessories, running earth and and finishing of the surface after rewiring etc.₹23,300
2Supply, erection, testing & commissioning of 6 A 3 Pin universal plug socket complete with switch, wiring and earth connection, to be provided in Existing light/fan board.₹960
3Supply, erection, testing and commissioning of 6 Amp. 3 pin universal plug socket complete with switch and point wiring in PVC casing caping with 2x2.5 sq mm FRLS multistranded PVC copper wire alongwith all accessories, running earth etc. on Separate Switch board.₹5,368
4Supply, erection, testing and commissioning of 6 A 3 Pin Plug socket complete with switches and point wiring with 2x2.5 sq.mm FRLS copper conductor and copper earthing wire- 4 Nos plug in each board complete.₹5,304
5Supply, erection, testing and commissioning of 15 A 3 pin universal plug socket with switch alongwith independent point wiring in PVC casing capping with 2x4 sq. mm. FRLS multistranded PVC copper wire alongwith all accessories, running earth etc.₹4,320
6Supply, erection, testing & commissioning of Submain from switch board to single phase DP switch / DP one circuit meter comprising of 2x4 sq.mm. PVC insulated FRLS 1.1KV multistranded wire & one running earth of 2.5 sq.mm. copper conducting PVC insulation green colour of 1.1 KV grade on rigid PVC casing caping with all accessories.₹27,000
7S.E T.C. of Submain with 2x6 sqmm FRLS copper wire inside PVC Casing caping with running earth etc complete. (1 m length of submain consists one cktmtr including all accessories & 2 wire of 6 sqmm with one wire of 2.5 sqmm for earth conn).₹19,100
8Supply, erection, testing and commissioning of Submain with 2x10 sqmm FRLS copper wire inside PVC Casing caping with running earth etc complete.(1 m length of submain consists one cktmtr including all accessories & 2 wire of 10 sqmm with one wire of 2.5 sqmm for earth conn.) and finishing of the surface after rewiring.₹13,380
9Supply, erection, testing & commissioning of Lighting Circuit Board, Double Door Powder coated with locking arrangement consisting 32 A DP RCBO as I/C and 6 Nos x 6 A SPMCB and 2 Nos x 20A O/G SPMCB Complete.₹16,784
10Supplying, fixing and commissioning 2 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30 mA sensitivity and short circuit and earth leakage trip indication as per specification₹7,956
11Supplying, fixing and commissioning 2 pole RCBO 63A, with overcurrent, rated shortcircuit breaking capacity (10 kA) and earth leakage protection, with 30 mA sensitivity and short circuit and earth leakage trip indication as per specification₹10,134
12Supply, erection, testing & commissioning of PVC Flexible pipe 1/2 Inch₹1,700
13Supply, erection, testing & commissioning of Indoor type Energy Efficient.The fitting shall be complete with 2x18 W LED luminaire with ballast (driver)etc. and connection to over head mains/junction box.₹54,750
14Supply and provision of Infrared Motionsensor 360 degree detection, range uptosensor 12m distance, IP 20, Capacity upto 300W with all necessary accessories.₹11,800
15Supply, erection, testing and commissioning of BLDC Super efficient electrical Ceiling Fan 1400 mm sweep (56') 260-280 RPM, Services value 7.7 input voltage 140-285 V. Power consumption 26 W to 30 W. Air delivery 270 CMM or more, 3 blades with double ball bearing with regulator of electronic step type and down rod 300-600 mm as per requirement, canopies, shackle.₹23,058
16Providing & erecting epoxy outdoor / indoor end termination kit for LT XLPE armoured cable 25 to 50 sq mm., with necessary material₹8,124
17Providing & erecting epoxy outdoor / indoor end termination kit for LT XLPE armoured cable 70 to 120 sq mm., with necessary material₹9,144
18"Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 25 to 50 sq mm., with necessary material as perspecification"₹9,816
19"Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 70 to 95 sq mm., with necessary material as perspecification"₹13,569
20Provision for supply & laying of 10 Sq. mm copper unarmoured, multistrand, PVC insulated PVC sheated wire, alongwith earth wire of 1.5 Sq. mm. copper PVC insulated/heathed wire in separate PVC casing-capping with all accessories. (Sub Main - 32 Amp MCCB to DB).₹34,700
21Supply of 4 core 25 sqmm armoured XLPE Cable.₹1,16,000
22Supply of LT XLPE Armoured 4 Core 50 Sqmm Aluminium cable as per relevant IS.₹1,99,000
23Supply of 4 Core 70 Sqmm armoured LT XLPE Cable.₹51,900
24Supply of 4 Core 95 Sqmm armoured LT XLPE Cable.₹3,63,000
25Trenching & refilling of LT/HT/ Various sizes of PVC / XLPE cables- Along the Road (Size - 900mm x 300mm)₹2,07,000
26Digging of cable trench 300/450 mm x 1000 mm in RCC/PCC/hard soil & refilling as per specification and requirement at the site.₹1,98,000
27Transportation, Laying, Installation, terminating, testing and commissioning of LT/HT cable of sizes 10 sqmm to 400 sqmm in existing trench, pipe or on structure.₹48,000
28Erection,testing and commissioning of cables other than trench i.e.Wall/Truss including clamp, GI wire and hardware₹27,200
29Supply & laying of GI pipe Class B, ISI marked under road /Clamping with erecting pole or wall as per techincal specification & drawing for passing cable.₹8,080
30Supply,installation, testing & commissioning of HDPE Pipe 110 mm Nominal Dia as per IS-4984-1995.₹37,500
31Supply and laying of RCC half round pipe 150 mm ID & 1 mtr length.₹1,30,200
32Supply and laying of RCC Hume Pipe of size 6"(150mm) dia 2 mtr. Length.₹7,070
33Supply, erection of RCC Type cable route marker with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.₹18,560
34Supply & Erection of RCC Warning Cover and refilling the cable trench in an approved manner.₹13,536
35Supply, fabrication, fixing and erection of MS Work of miscellaneous size and for cable tray etc. including painting complete.₹8,030
36Supply, erection, testing & commissioning of maintenance free earth as per RDSO specification no. RDSO/PE/SPEC/ PS/0109-008(REV '0') with improved earthing enhancing compound and exothermic welding, including Earthing Pit Box & necessary cementing work to make site as original. (Warranty 02 Years)₹1,50,960
37Supply, fabrication, laying welding and connection of GI Flat of size 25x3 mm from earth pit with GI nut Bolt suitable size.₹12,300
38Providing & erecting Hot dipped Galvanised Perforated type cable tray manufactured from 16 SWG (1.6 mm thick) Gl sheet of 300 mm width & 100 mm height comprising all required standard accesssories.₹3,19,800
39Design, manufacture, display, erection and installation of wall/hanging/floor mounting type LED illuminated sign/direction boards in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text/graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed/router cut on monomeric calendered vinyl of 70 um thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signange shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W/sq.ft and brightness more than ambient light. suitable size end cap of 1.5 mm thick SS 304 should be provided.₹30,225
40Supply, Erection, Designing, providing & fixing vinyl both way LED illuminated Signage for display of passengers utility items at Stations complete with Allu. Sheet metal powder coated sign case of size 16X72 inches & 3 inch in width. The matter of display shall be as per Railways requirement.₹59,472
41Supply of all material,excavation and casting of cement concrete foundation/concreting in ratio 1:3:6 for above work.₹12,256
42SETC of Outdoor type LT Panel as per IEC 61439 with double door powder coated with locking aragnements consisting 1 Nos X 200 A 4P MCCB for I/c and 2 Nos x 100 A 4P MCCB, 2 Nos x 63 A 4P RCBO, 2 Nos x 2 pole RCBO 32/40A, 2 Nos x 2 pole RCBO up to 16 A for O/G with ELR & CBCT for each MCCB, Power qaulity analyzer, communicable Multifunction meter, indication lamp, copper busbar, & other assocciate aceesories. All MCCB are Microprocessor based (completely wired with suitable communication cable to fetch data from each compartment functional Unit (ACB/MCCB/SFU etc) / Multifunction Meter) and other accessories.₹7,70,358
Schedule D · Electrification work in connection with provision of Escalator on New sanctioned 12M wide FOB (CSMT End) at Nashik Road Railway station.
1Supply, erection, connection, testing and commissioning of light points with casing capping/PVC pipe as per wiring specification attached. The wiring shall be carried out with copper conductor of 1100V grade size 1.5 sq.mm - 4 sq.mm for the following point such as FL tube/ODFT and fitting wiring. & Ceiling fan/Wall fan/Exhaust fan point₹7,272
2Supply, erection, connection, testing and commissioning of light points with casing capping/PVC pipe as per wiring specification attached. The wiring shall be carried out with copper conductor of 1100V grade size 1.5 sq.mm - 4 sq.mm for the following point: 1) 5A, 5 pin socket point on fan and light control board.₹690
3Supply, erection, connection, testing and commissioning of light points with casing capping/PVC pipe as per wiring specification attached. The wiring shall be carried out with copper conductor of 1100V grade size 1.5 sq.mm - 4 sq.mm for the following point: 1) 5A, 5 pin socket point on separate circuit and board.₹2,256
4Supply, erection, connection, testing and commissioning of light points with casing capping/PVC pipe as per wiring specification attached. The wiring shall be carried out with copper conductor of 1100V grade size 1.5 sq.mm - 4 sq.mm for the following point: 1) 4x5A, 5 pin socket point on separate circuit and board for Computer.₹2,766
5Supply, erection, connection, testing and commissioning of light points with casing capping/PVC pipe as per wiring specification attached. The wiring shall be carried out with copper conductor of 1100V grade size 1.5 sq.mm - 4 sq.mm for the following point: 1) 15A, 6 pin Universal type socket point on separate circuit and board with 4 sq.mm wire.₹3,126
6Supply, erection, testing & commissioning of Submain from switch board to single phase DP switch / DP one circuit meter comprising of 2x4 sq.mm. PVC insulated FRLS 1.1KV multistranded wire & one running earth of 2.5 sq.mm. copper conducting PVC insulation green colour of 1.1 KV grade on rigid PVC casing caping with all accessories.₹84,150
7Supply, erection, testing & commissioning of Submain with 2x6 sqmm FRLS copper wire inside PVC Casing caping with running earth etc complete. (1 m length of submain consists one cktmtr including all accessories & 2 wire of 6 sqmm with one wire of 2.5 sqmm for earth conn).₹31,050
8Supply, erection, testing & commissioning of Mini MCB modular type 6A-32 A.₹741
9SETC of Lighting Circuit Board, Double Door Powder coated with locking arrangement consisting 32 A 2 P RCBO as I/C and 2 Nos x upto 16 A 2P RCBO and 2 Nos x upto 25A 2P RCBO in O/G and all necessary acessories Complete.₹1,36,929
10Supply, erection, testing & commissioning of PVC Flexible pipe 1/2 Inch₹2,550
11Supply, erection, testing & commissioning of Indoor type Energy Efficient.The fitting shall be complete with 2x18 W LED luminaire with ballast (driver)etc. and connection to over head mains/junction box.₹1,04,100
12Supply of LT XLPE Armoured 4 Core 50 Sqmm Aluminium cable as per relevant IS.₹5,97,000
13Trenching & refilling of LT/HT/ Various sizes of PVC / XLPE cables- Along the Road (Size - 900mm x 300mm)₹41,400
14Digging of cable trench 300/450 mm x 1000 mm in RCC/PCC/hard soil & refilling as per specification and requirement at the site.₹2,99,200
15Transportation, Laying, Installation, terminating, testing and commissioning of LT/HT cable of sizes 10 sqmm to 400 sqmm in existing trench, pipe or on structure.₹30,000
16Erection,testing and commissioning of cables other than trench i.e.Wall/Truss including clamp, GI wire and hardware₹34,000
17Supply & laying of GI pipe Class B, ISI marked under road /Clamping with erecting pole or wall as per techincal specification & drawing for passing cable.₹10,100
18Supply,installation, testing & commissioning of HDPE Pipe 110 mm Nominal Dia as per IS-4984-1995.₹10,000
19Supply and laying of RCC half round pipe 150 mm ID & 1 mtr length.₹74,400
20Supply and laying of RCC Hume Pipe of size 6"(150mm) dia 2 mtr. Length.₹1,414
21Supply, erection of RCC Type Cable route marker with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.₹4,990
22Supply & Erection of RCC Warning Cover and refilling the cable trench in an approved manner.₹4,230
23Supply, fabrication, fixing and erection of MS Work of miscellaneous size and for cable tray etc. including painting complete.₹43,800
24Supply, erection, testing & commissioning of Maintenance free earth as per RDSO specification no. RDSO/PE/SPEC/ PS/0109-008(REV '0') with improved earthing enhancing compound and exothermic welding₹4,50,390
25Supply, fabrication, laying welding and connection of GI Flat of size 25x3 mm from earth pit with GI nut Bolt suitable size.₹30,900
26Providing & erecting Hot dipped Galvanised Perforated type cable tray manufactured from 16 SWG (1.6 mm thick) Gl sheet of 300 mm width & 100 mm height comprising all required standard accesssories.₹6,39,600
27Design, manufacture, display, erection and installation of wall / hanging / floor mounting type LED illuminated sign / direction boards etc. in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed / router cut on monomeric calendered vinyl of 70 um thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided. (The matter as per Rly requirements)₹1,40,445
28Supply, Erection, Designing, providing & fixing vinyl both way LED illuminated Signage for display of passengers utility items at Stations complete with Allu. Sheet metal powder coated sign case of size 16X72 inches & 3 inch in width. The matter of display shall be as per Railways requirement.₹89,208
29Supply of all material,excavation and casting of cement concrete foundation/concreting in ratio 1:3:6 for above work.₹36,768
30SETC of outdoor type LT panel as per IEC 61439 with double door powder coated with locking arrangements consisting 2 Nos x 250 A 4P MCCB as I/C with 250 A changeover and 4 Nos x 100 A 4P MCCB, 3 No X 2P upto 32/40A RCBO& 3 No X 2P upto 16 A RCBO for O/G With power quality analyzer, ELR with CBCT for each MCCB, multifunctionmeter, indication lamp, copper busbar, & other assocciate aceesories. All MCCB are Microprocessor based (completely wired with suitable communication cable to fetch data from each compartment functional Unit (ACB/MCCB/SFU etc) / Multifunction Meter)₹16,08,819
Total₹2,29,84,426

The total matches the advertised value.

Documents

7 files

Documents to submit

Commercial-Compliance

  • The registration of contractors working under Railway departments with ESIC is mandatory (if applicable as per current Law / Act)

    Document required
  • In case a tenderer is participating as Sole Proprietor in a tender, it is mandatory for him to submit an undertaking on suitable stamp paper to this effect clearly mentioning PAN number also along with tender document at the time of submission of tender.

    Document required
  • Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

    Document optional

Technical-Compliances

  • The contractor shall submit copy of valid Electrical ContractorLicense as per Clause No. 45 IE Rule 1956 along with the offer. The offer willbe summarily rejected in absence of valid Electrical Contractor License.

    Document required

Custom

  • The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern as per Clause 14 of GCC April 2022 i.e. 'Documents to be Submitted Along with Tender' (Para 2.0 of "Instructions to tenderers and special condition of contract" of Tender Document), and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be.

    Document required
  • The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required.

    Document required
  • In case of other than Company / Proprietary Firm, Annexure-V(A) (attached in last page of tender document) shall also be submitted by the each member of a Partnership Firm / Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. as the case may be. Non submission of above certificate(s) by the bidder shall result in summarily rejection of his/their bid

    Document required

Eligibility

Special Financial Criteria

  • The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB(available in GCC), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.

    Document required
  • Calculation of required minimum average annual contractual turnover V=Rs. 22984426 , N=6 months = 0.5 years, V/N=Rs. 22984426/0.5 =Rs. 45968852, V is less than V/N, Hence, required minimum average annual contractual turnover = Rs. 22984426

Special Technical Criteria

  • The tenderer must have successfully completed or substantially completed any one ofthe following categories of work(s) during last 07 (seven) years, ending last day of monthprevious to the one in which tender is invited:

    1. Three similar works each costing notless than the amount equal to 30% of advertised value of the tender, or
    2. Two similarworks each costing not less than the amount equal to 40% of advertised value of thetender, or
    3. One similar work costing not less than the amount equal to 60% ofadvertised value of the tender. Note: (1) Work experience certificate from privateindividual shall not be considered. However, in addition to work experience certificatesissued by any Govt. Organization, work experience certificate issued by Public listedcompany having average annual turnover of Rs 500 crore and above in last 3 financialyears excluding the current financial year, listed on National Stock Exchange or BombayStock Exchange, incorporated/registered at least 5 years prior to the date of closing oftender, shall also be considered provided the work experience certificate has beenissued by a person authorized by the Public listed company to issue such certificates. Incase tenderer submits work experience certificate issued by public listed company, thetenderer shall also submit along with work experience certificate, the relevant copy ofwork order, bill of quantities, bill wise details of payment received duly certified byChartered Accountant, TDS certificates for all payments received and copy of final/lastbill paid by company in support of above work experience certificate. Definition of Similar Nature of Works :- Electrification / Rewiring of Service or Residential building / Yard / HT / LT substation work / HT / LT cable work / street lighting / platform or building lighting management / circulating area Lighting / Electrical overhead power supply work / Electrical pump work etc.
    Document required

Partnership firm/Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.

  • Please submit a certificate in the prescribed format (please download the format from the link given below). Non submission of the certificate, or submission of certificate either not properly filled in, or in a format other than the prescribed format shall lead to summary rejection of your offer. ( Click here to download the Format of Self Certification)

Check each criterion against the tender notice before you bid.

Commercial conditions

EMD
₹459,700
Tender fee
None

Terms & conditions

2 conditions

General Instructions

  • Contractor shall ensure all precautions during digging work close to Rly signaling, telecom electrical cables etc. Penalties to be imposed for damages to any cable as per Railway board letter no. 2021/Tele/5(2)/3- Part(1)/(3425647) dtd 12.06.2023

Special Conditions

  • Contractor is to abide by the provisions of Payment of Wages act & Minimum Wages act in terms of clause 54 and 55 of Indian Railways General Condition of Contract. In order to ensure the same, an application has been developed and hosted on website 'www.shramikkalyan.indianrailways.gov.in'. Contractor shall register his firm/company etc. and upload requisite details of labour and their payment in this portal. These details shall be available in public domain. The Registration/ updation of Portal shall be done as under:

    1. Contractor shall apply for onetime registration of his company/firm etc. in the Shramikkalyan portal with requisite details subsequent to issue of Letter of Acceptance. Engineer shall approve the contractor's registration in the portal within 7 days of receipt of such request.
    2. Contractor once approved by any Engineer, can create password with login ID (PAN No.) for subsequent use of portal for all LoAs issued in his favour.
    3. The contractor once registered on the portal, shall provide details of his Letter of Acceptances (LoA) / Contract Agreements on shramikkalyan portal within 15 days of issue of any LoA for approval of concerned engineer. Engineer shall update (if required) and approve the details of LoA filled by contractor within 7 days of receipt of such request.
    4. After approval of LoA by Engineer, contractor shall fill the salient details of contract labours engaged in the contract and ensure updating of each wage payment to them on shramikkalyan portal on monthly basis.
    5. It shall be mandatory upon the contractor to ensure correct and prompt uploading of all salient details of engaged contractual labour & payments made thereof after each wage period.
Bidder declarations (13)

Undertakings

  • I/We have read the Tender document and GCC-April 2022 (along with amendments issued by Railway Board from time to time) and all terms & conditions to tender attached hereto and hereby agree to abide by the said conditions. In submitting the tender it would be deemed that the tenderer has kept himself fully Informed of the provision of the Indian Railways Standard General Conditions of Contract including all corrections and Amendments issued upto date and claim that he is not aware of any amendment or correction slip to the IRSGCC shall not be entertained.

  • Before submitting a tender, the tenderer will be deemed to have satisfied himself by actual inspection of the site and locality of the works, that all conditions liable to be encountered during the execution of the works are taken into account and that the rates he enters in the tender forms are adequate and all inclusive to accord with the provisions in Clause-37 of the Standard General Conditions of Contract for the completion of works to the entire satisfaction of the Engineer.

  • Full value of the bid security shall stand forfeited without prejudice to any other right or remedies if (I)I/We do not execute the contract documents within seven days after receipt of notice issued by the Railway that such documents are ready (ii)I/We do not commence the work within fifteen days after receipt of orders to that effect.

Certifications

  • I/we the tenderer (s) am/are signing this document after carefully reading the contents.

  • I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.

  • I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.

  • I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.

  • I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.

  • I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.

  • I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.

  • I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.

  • I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.

  • I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)

Similar open tenders

Soonest first

Search similar in the explorerFind this tender in the explorer

Tender notice (PDF)