Browse all bids
eProcureOpenWorks

Design, supply, erection testing and commissioning of 25 KV, Single Phase, AC OHE works, in connection with work of i) Extension of UP and DN loop line at Waghoda station in Bhusawal division of Cent…

Ministry of Railways

Office of the Sr.DEE/G/BSL, DRM Office Building Bhusawal

Delivers to

Bhusawal, Jalgaon, Maharashtra

Overview

23 facts from the tender

Ministry of Railways published this works tender on eProcure on 14 Oct 2026, for Bhusawal, Jalgaon, Maharashtra. The estimated value is ₹92.3 L and the EMD is ₹1.8 L. It closes on 5 Nov 2026, 3:00 pm IST. Tender ID 92545869 · Ref BSL_ELECT_TRD_54_2026.

Timeline

  1. Published14 Oct 2026 · 5:49 pm
  2. Closes5 Nov 2026 · 3:00 pm

Bidding

Bid type
Open/Advertised
Contract type
Works - General · Expenditure
Tender type
Open
Tendering section
TRD BSL
Bidding system
Single Packet System
Bidding style
Single Rate for Tender
Validity of offer
60 days
Completion period
12 Months
Tender document cost
None
JV / consortium
Not allowed
Ranking order
Lowest to Highest
Expenditure type
Capital (Works)
Pre-bid meeting
None

Buyer

Inviting authority
BHUSAWAL DIVISION-ELECTRICAL/CENTRAL RLY
Organisation type
Central Govt. Ministry/Department
Product category
Railway related Products
Location
Bhusawal, Jalgaon, Maharashtra · the inviting office's place
Portal location
Mumbai CST · as listed on eProcure
Portal
eProcure
Inviting officer
Sr.DEE/TRD/BSLBHUSAWAL DIVISION-ELECTRICAL/CENTRAL RLY

Important dates

Published
14 Oct 2026, 5:49 pm IST
Bidding starts
22 Oct 2026
Closes
5 Nov 2026, 3:00 pm IST

Declarations by the buyer

  • Complies with the Public Procurement (Make in India) Order 2017
  • The tender inviting authority confirms this tender does not violate the GFR rules on procurement through GeM
  • Bidders from a country sharing a land border with India must be registered with the competent authority

Schedule of work

112 items
ItemQuantityRailways’ estimated rateAmount
Schedule A · Extension of UP & DN loop line at Waghoda station.
1Digging, casting, grouting & muffing of foundation including cost of cement and material in other than hard soil & rock. (Foundation should be M-15 type as per IS-456, i.e ratio 1:2:4)200 cum₹7,574₹15,14,800
2Digging, casting, grouting & muffing of foundation including cost of cement and material in hard soil & rock. (Foundation should be M-15 type as per IS-456, i.e ratio 1:2:4)60 cum₹7,772₹4,66,320
3Preparation of design & drawing for overhead equipment6 Per Track KM₹18,058₹1,08,348
4Preparation, supply & fixing of sectioning diagram on foam sheet board with vinyl printing & framing50 Square Foot₹313₹15,650
5Supply of galvanized steel for structure23 MT₹1,20,000₹27,60,000
6Erection of galvanized steel for structure19 MT₹7,000₹1,33,000
7Extra charges for power block work for Erection of galvanised steel for structures19 MT₹4,000₹76,000
8Erection of Portal / TTC Boom (Manual/with Road Crane)4 MT₹10,000₹40,000
9Extra charges for power block work for Erection of Portal / TTC Boom (Manual/with Road Crane)4 MT₹5,000₹20,000
10Supply of galvanized small parts steel (SPS)3 MT₹1,20,000₹3,60,000
11Erection of galvanized small parts steel (SPS)3 MT₹7,000₹21,000
12Extra charges for power block work for Erection of galvanised small parts steel (SPS)3 MT₹5,000₹15,000
13Supply of a single bracket / cantilever assembly suitable for Coventional OHE with bracket and stay porcelain insulators.50 Numbers₹21,000₹10,50,000
14Erection of a single bracket / cantilever assembly suitable for Coventional OHE with bracket and stay porcelain insulators50 Numbers₹1,015₹50,750
15Extra charges for power block work for Erection of a single bracket / cantilever assembly suitable for Coventional OHE with bracket and stay porcelain insulators.50 Numbers₹1,015₹50,750
16Supply of hard drawn round copper for dropper wire, diameter 5 mm as per IS:282:1982.64 Kg₹1,000₹64,000
17Supply Contact wire Dropper clip (107) with locking wire as per RDSO Drawing no. RE/33/P/ 1181 Rev. G or latest.320 Numbers₹100₹32,000
18Supply 65 Sq.mm copper catenary dropper clip assembly consisting of catenary clip SS bolt M-10X30X35 mm (10/16), spring washer B-10, Split pin 2.5X20mm, as per RDSO Drawing no. ETI/OHE/P/1192 Mod. C or latest.320 Numbers₹100₹32,000
19Fabrication & erection of dropper assembly (Conventional OHE) including removal of old droppering.320 Numbers₹100₹32,000
20Extra charges for power block work for Fabrication & erection of dropper assembly (Conventional OHE) including removal of old droppering.320 Numbers₹100₹32,000
21Manual erection of overhead equipment (Conventional OHE).0.80 Kilometre₹42,471₹33,976.80
22Extra charges for power block work for Manual erection of overhead equipment (Conventional OHE).0.80 Kilometre₹25,000₹20,000
23Supply of Contact wire splice (Toothed type) complete with stainless steel stud bolt M-12, 25/20, as per RDSO drg. No. ETI/OHE/P/1080-1 Mod-'C'4 Numbers₹1,192₹4,768
24Supply of Catenary Splice (65) as per RDSO drg. No. ETI/OHE/O/1090 or latest.4 Numbers₹616₹2,464
25Splicing & extension of anchored over head equipment.8 Numbers₹2,265₹18,120
26Extra charges for power block work for Splicing & extention of anchored over head equipment.8 Numbers₹2,265₹18,120
27Supply of termination assembly for Conventional OHE (Including insulators)16 Set₹9,500₹1,52,000
28Erection of termination assembly for Conventional OHE (Including insulators)12 Set₹1,500₹18,000
29Extra charges for power block work for Erection of OHE termination assembly Conventional OHE (Including insulators)12 Set₹1,000₹12,000
30Supply of 3 pulley type ATD assembly for Conventional OHE as per 2X25 KV AT System. (Without Counter Weight )10 Set₹40,000₹4,00,000
31Erection of 3 pulley type ATD assembly for Conventional OHE as per 2X25 KV AT System.10 Set₹3,603₹36,030
32Extra charges for power block work for Erection of 3 pulley type ATD for Conventation OHE as per 2X25 KV AT System.10 Set₹2,000₹20,000
33Erection of anticreep arrangement2 Numbers₹4,000₹8,000
34Extra charges for power block work for Erection of anticreep arrangement2 Numbers₹2,000₹4,000
35Supply of guy rod assembly16 Set₹8,636₹1,38,176
36Erection of guy rod assembly16 Set₹600₹9,600
37Supply of Section Insulator assembly along with all fittings including porcelain sectioning insulator & porcelain 9 tonne insulator suitable for Conventional OHE1 Set₹42,486₹42,486
38Erection of Section Insulator assembly along with all fittings suitable for Conventional OHE1 Set₹3,386₹3,386
39Extra charges for power block work Erection of Section Insulator assembly along with all fittings suitable for Conventional OHE1 Set₹2,000₹2,000
40Supply of 25 KV 1600 A Single Pole Isolator assembly with Insulators and pad lock (03 keys)1 Set₹75,000₹75,000
41Erection of 25 KV 1600 A Single Pole Isolator assembly with Insulators1 Set₹5,000₹5,000
42Extra charges for power block work Erection of 25 KV 1600 A Single Pole Isolator assembly with Insulators1 Set₹2,000₹2,000
43Supply of Integral lock for Isolator with 02 nos key.1 Numbers₹1,656₹1,656
44Supply of 25 KV Post Insulator2 Numbers₹6,000₹12,000
45Erection of 25 KV Post Insulator2 Numbers₹800₹1,600
46Supply of single earth electrode4 Numbers₹3,911₹15,644
47Erection of single earth electrode4 Numbers₹956₹3,824
48Supply of Porcelain 9 Tonne Insulator RI 6020-I (Minimum CD 1050 mm) conforming to RDSO Specification no.T1/SPC/OHE/INS/0070 (04/2007) with A & C Slip no.1 & 2 or latest for Cut-in Insulator/Suspension.8 Numbers₹3,200₹25,600
49Supply of Contact Wire Ending Clamp (107) as per ID no.1110-2 & DRG.No ETI/OHE/1110-2. Each set comprising of 01 No. contact wiree nding clamp body part no.1118. 01 No. contact wire ending clamp wedge part no.1119 for Cut- in Insulator/Suspension.16 Set₹376₹6,016
50Supply of Catenary Wire Ending Clamp (65 Sq.mm) Part No.1121, 1092 &1094 with fasteners as per Drg NO.ETI/OHE/P/1120 Rev-B or Latest for Cut- in Insulator/Suspension16 Numbers₹564₹9,024
51Erection of cut-in Insulator assembly.8 Numbers₹712₹5,696
52Extra charges for power block work for erection of cut-in Insulator assembly.8 Numbers₹712₹5,696
53Supply of Copper Jumper wire (160 sq mm)80 Kg₹1,003₹80,240
54Supply of P.G.Clamp (1030-3) complete assembly80 Set₹297₹23,760
55Erection of any type jumper assembly such as G Jumper, AT Jumper, Isolator Jumper etc10 Set₹500₹5,000
56Extra charges for power block work for Erection of any type jumper assembly such as G Jumper, AT Jumper, Isolator Jumper etc10 Set₹100₹1,000
57Supply of 40mm X 6mm Galvanized Traction Bond300 Metre₹250₹75,000
58Fabrication & fixing of 40mm X 6mm Galvanized Traction Bond300 Metre₹80₹24,000
59Supply of Retro reflective type Location number plates.70 Numbers₹431₹30,170
60Erection of Retro reflective type Location number plates including clamps & nut bolt.70 Numbers₹86₹6,020
61Supply of 25 KV Caution Board in electrified area as per RDSO Drawing.10 Numbers₹395₹3,950
62Erection of 25 KV Caution Board in electrified area as per RDSO Drawing including clamps & nut bolts.10 Numbers₹86₹860
63Painting of "OHE Parameters" on OHE structures as per Drwaing no. BSL/TD/SK-44170 Numbers₹52₹3,640
64Painting of "Location Numbers" on backside of OHE structures as per Drawing no. BSL/TD/SK-42470 Numbers₹43₹3,010
65Painting of Counter Weight of ATD by Silver Paint & Painting of Location number on bottom 3 pieces of counter weight with similer colour of enamelled number plate.10 Numbers₹318₹3,180
66Transfer of equipment from one mast or support to another including old bracket removal.35 Numbers₹2,500₹87,500
67Extra charges for power block work for Transfer of equipment from one mast or support to another including old bracket removal.35 Numbers₹1,000₹35,000
68Dismantling of overhead equipment including SPS, DA, bracket etc but excluding structures.0.40 Kilometre₹30,000₹12,000
69Extra charges for power block work for Dismantling of overhead equipment including SPS, DA, bracket etc but excluding structures.0.40 Kilometre₹30,000₹12,000
70Dismantling of OHE termination assembly10 Numbers₹750₹7,500
71Extra charges for power block work for Dismantling of OHE termination assembly10 Numbers₹693₹6,930
72Dismantling of any type of ATD assembly9 Numbers₹2,500₹22,500
73Extra charges for power block work for Dismantling of any type of ATD assembly9 Numbers₹1,000₹9,000
74Dismantling of anticreep arrangement1 Numbers₹1,754₹1,754
75Extra charges for power block work for Dismantling of anticreep arrangement1 Numbers₹1,000₹1,000
76Dismantling of guy rod assembly12 Numbers₹500₹6,000
77Dismantling of Section Insulator assembly1 Set₹2,000₹2,000
78Extra charges for power block work for Dismantling of Section Insulator assembly1 Set₹1,000₹1,000
79Dismantling of Single Pole Isolator assembly including SPS1 Set₹2,000₹2,000
80Extra charges for power block work for Dismantling of Single Pole Isolator assembly including SPS1 Set₹1,000₹1,000
81Dismantling of cut-in Insulator assembly.4 Numbers₹500₹2,000
82Extra charges for power block work for Dismantling of cut-in Insulator assembly4 Numbers₹500₹2,000
83Dismantling OHE structures by cutting & transporting to Railway depot including loading and unloading.5 MT₹4,000₹20,000
84Dismantling of Portal / TTC Boom (Manual / with Road Crane)1 MT₹5,000₹5,000
85Extra charges for power block work for Dismantling of Portal / TTC Boom (Manual / with Road Crane)1 MT₹5,000₹5,000
86Breaking of foundation10 cum₹4,000₹40,000
87Erection of copper feeder wire (150 sq.mm.)400 Metre₹156₹62,400
88Extra charges for power block work for Erection of copper feeder wire (150 sq.mm.)400 Metre₹161₹64,400
89Supply of 150 sq.mm feeder wire termination assembly2 Numbers₹7,549₹15,098
90Erection of 150 sq.mm feeder wire termination assembly2 Numbers₹1,810₹3,620
91Extra charges for power block work for Erection of 150 sq.mm feeder wire termination assembly2 Numbers₹2,483₹4,966
92"Supply of 9 Tonne insulator & suspension assembly for feeder wire."8 Numbers₹8,113₹64,904
93Erectionof 9 Tonne insulator & suspension assembly for feeder wire.8 Numbers₹536₹4,288
94Extra charges for power block work for Erection of 9 Tonne insulator & suspension assembly for feeder wire.8 Numbers₹526₹4,208
95Dismantling of 150 Sq. mm Feeder Copper Wire / Cross Feeder wire with insulator including termination & transportation to Railway Depot.400 Metre₹40₹16,000
96Extra charges for power block work for Dismantling of 150 Sq. mm Feeder Copper Wire / Cross Feeder wire with insulator including termination & transportation to Railway Depot.400 Metre₹40₹16,000
Schedule B · Shifting of UP & Down AT supply from old panel Building to New Panel Building at Chandani station.
1Preparation of design & drawing for overhead equipment.1 Per Track KM₹18,058₹18,058
2Transportation, Trenching, and Laying of LT/HT various size of PVC/XPLE cables along the Railway track750 Metre₹318₹2,38,500
3Supply of RCC warning cover as per specification.1,500 Numbers₹59₹88,500
4Laying of RCC warning cover as per specification.1,500 Numbers₹10₹15,000
5Supply of cast iron cable marker as per drawing.30 Numbers₹293₹8,790
6Erection of cast iron cable marker as per drawing.30 Numbers₹46₹1,380
7Laying of 2 X 70 sq. mm. Al. armoured cable through provided pipe on wall / structure20 Metre₹38₹760
8Laying of 2 X 70 sq. mm. Al. armoured cable by cleating on wall.20 Metre₹49₹980
9Supply of termination box for CLS cable1 Numbers₹5,012₹5,012
10Erection of termination box for CLS cable.1 Numbers₹702₹702
11Supply of junction box with stand, aluminium busbar etc as per Drawing No. - BSL/TD/SK/2322 Numbers₹2,500₹5,000
12Erection of junction box with stand, aluminium busbar etc as per Drawing No. - BSL/TD/SK/2322 Numbers₹404₹808
13Supply of Control & distribution Panel with Auto change over switch, 63 Amp capacity (3 source type) for CLS supply, suitable for 10 KVA 'AT', as per RDSO specification latest.1 Numbers₹51,759₹51,759
14Erection, testing & commissioning of Control & distribution Panel with Auto change over switch, 63 Amp capacity (3 source type) for CLS supply, suitable for 10 KVA 'AT', as per RDSO specification latest1 Numbers₹5,547₹5,547
15Supply of single earth electrode2 Numbers₹3,911₹7,822
16Erection of single earth electrode2 Numbers₹956₹1,912
Total₹92,32,928.80

The total matches the advertised value.

Documents

9 files

Documents to submit

Commercial-Compliance

  • In case of other than Company/Proprietary firm, Annexure -V(A) shall be submitted by each member of Partnership Firm / Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. as the case may be. Non submission of above certificate(s) by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self-attested/digitally signed by which they / he is qualifying the Qualifying Criteria mentioned in the Tender Document. Format of Annexure VA is available in GCC April'2022 uploaded with the tender.(Company/Proprietary firm may upload a pdf with remark "Not applicable")

    Document required
  • Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

    Document optional

Technical-Compliances

    1. List of personal organization available on hand and proposed to be engaged for the subject work.
    2. List of Plant & Machinery available on hand (own) and proposed to be inducted (own & hired to be given separately) for the subject work.
    3. List of works completed in the last three financial year giving description of work, organization for whom executed, approximate value of contract at the time of award, date of award and date of schedule completion of work. Date of actual start, actual completion and final value of contract should also be given.
    4. List of works on hands indicating description of work, contract value, approximate value of balance work yet to be done and date of award.
    Document optional

Eligibility

Standard Financial Criteria

  • The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB(available in GCC), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (In case, the tenderer fails to submit Annexure VIB and/or Audited Balance Sheets, the offer will be summarily rejected).

    Document required

Special Technical Criteria

  • Tenderer shall have "Electrical Contractor License", which must be valid at least up to Tender closing date. Copy of valid license must be attached along with the offer. In case the validity of the License submitted has expired, the tenderer's offer will be considered only if they have applied for renewal before the expiry of the License and have submitted valid proof of the same along with their offer. Otherwise, the offer shall not be considered.

    Document required
  • In case a tenderer is participating as Sole Proprietor in a tender, it is mandatory for him to submit an undertaking on suitable stamp paper to this effect clearly mentioning PAN number also along with tender document at the time of submission of tender. (CEGE/CRly's letter no.CR.PCEE.Secy.Genl.Corresp, dated 13-10-2022.). Sole proprietor Certificate Format is uploaded herewith. (This certificate is mandatory for Proprietor firm and not required from other than Proprietor firm. Other than Proprietor firm may upload a pdf with remark "Not applicable") ( Click here to download Format)

    Document required
  • Bidder should submit the documents as prescribed in para 14 of second sheet of GCC-2022 to establish constitution of firm as well as legality of the person submitting the tender.

    Document required

Standard Technical Criteria

  • The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:

    1. Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or
    2. Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or
    3. One similar work costing not less than the amount equal to 60% of advertised value of the tender. Note: (1) Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate
    Document required
  • Defination of Similar Work Execution of any 25 KV AC OHE work. (Tenderer must submit COMPLETION CERTIFICATES in support of Sr. no. 1 & 1.1 as above, failing which, the offer will be summarily rejected). Submission of Work Completion Certificate is Mandatory. Ignore "Not Allowed" remark given in "Document Uploading" column.

Partnership firm/Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.

  • Please submit a certificate in the prescribed format (please download the format from the link given below). Non submission of the certificate, or submission of certificate either not properly filled in, or in a format other than the prescribed format shall lead to summary rejection of your offer. ( Click here to download the Format of Self Certification)

Check each criterion against the tender notice before you bid.

Commercial conditions

EMD
₹184,700
Tender fee
None

Terms & conditions

Bidder declarations (10)

Certifications

  • I/we the tenderer (s) am/are signing this document after carefully reading the contents.

  • I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.

  • I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.

  • I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.

  • I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.

  • I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.

  • I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.

  • I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.

  • I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.

  • I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)

Similar open tenders

Soonest first

Search similar in the explorerFind this tender in the explorer

Tender notice (PDF)