- Specification Name
- बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Description of Stores
- Desktop Computer with Table Mount Monitor System with Compatible Chipset as per Processor Make with Minimum 6 USB Port
- Computer Type
- Mid Level
- Processor Number
- AMD Ryzen 5 5600G, Intel Core i5 12400 Or higher
- Specification Name
- बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Expansion Slots (M Dot 2) for WiFi
- 1 Or higher
- Factory Pre-loaded Operating System by Desktop OEM
- Window 11 Home
- RAM Size (Memory Card/Module) (in GB) (Capacity to be installed in the System)
- 16, 32 Or higher
- Type of Storage Installed with the System
- NVMe-SSD
- SSD - Storage Capacity (in GB)
- 512, 1024, 2048 Or higher
- HDD - Storage Capacity (in GB)
- 0 as SSD only Installed Or higher
- Cabinet Form Factor
- SMALL FORM FACTOR (7 to 13 Liters)
- Optical Drive
- No Optical Drive
- Number of USB Ports Type C
- 1, 2 Or higher
- Availibility of Monitor
- Yes as per IS 13252 (Part 1)
- Panel Type
- In Plane Switching (IPS)
- Screen Size (in CMs)
- 58.1 - 63 (22.87" - 24.8")
- On Site OEM Warranty (in Year)
- 3, 4, 5 Or higher
- Generation
- It should be core i5 and 13 Generation
- Product Verification
- The buyer/consignee shall verify the complete product details, including configuration, through the OEM website. The buyer/consignee should be able to perform these verifications without needing to create an account on the OEM website.
- Warranty
- 1. The buyer may ensure that as soon as supplies are received, a request for a warranty certificate is made, along with logging into the OEM website/call centre to verify the certificate. 2. The product in GeM marketplace (Direct Purchase & L1 purchase) comes with a minimum standard on site warranty of one year. In case the seller has standard warranty more than one year, the same may be mentioned in the catalogue (including in the model name) and in such case higher warranty offered shall prevail/supersede the minimum one year warranty. 3. Buyer shall verify the actual number of prints completed by the printer at the time of delivery (to ensure that the product has not been in use prior to delivery to the buyer) and may be verified using the printer’s built-in print counter or an equivalent tracking system as available with OEMs. 4. Buyer may please note that warranty does not cover any consumables i.e. Cartridges/Toner/Ink/Developer and such consumables.
- OEM Website Link/Part No for product verification
- The OEM shall provide the OEM website link to the buyer at the time of delivery. The offered model details/configuration should be available on the OEM's website. A device serial number must also be provided at the time of supply, which must also be mentioned on the product supplied. The buyer/consignee must be able to verify the complete product details, including configuration, through the provided OEM website link.
- Warranty
- 1. The seller shall furnish a valid warranty Certificate/Tag in physical or digital format from the OEM to the purchaser, guaranteeing the product's coverage under the specified warranty terms. The warranty certificate should be verifiable through the OEM website/customer care centre. 2. The product in GeM marketplace (Direct Purchase & L1 purchase) comes with a standard warranty of 1 year only and additional warranty may be opted for via the bidding process. 3. The warranty period will be valid for the specified number of years or until the printer reaches the OEM-defined Minimum Number of Prints within the Warranty Period , whichever is earlier, i.e. once the printer meets either the Minimum Number of Prints within the Warranty Period or the time duration specified, the warranty coverage will end. 4. The actual number of prints completed by the printer during the warranty period may be verified using the printer’s built-in print counter or an equivalent tracking system.
- Compliance of extended producer’s responsibility
- With effect from 1st April 2023, as per the E-waste rules 2022, EPR registration is mandatory for manufacturing entities. Therefore, all OEMs shall hold valid EPR registration, and the registration number should be reflected in the catalogue parameter. OEMs shall ensure compliance with all responsibilities as per EPR registration applicable from time to time.
- Product Verification
- At the time of delivery, the Seller shall provide the Original Equipment Manufacturer website link along with the device serial number corresponding to the supplied product. The serial number shall be clearly indicated on the product. The Buyer or Consignee shall be able to verify complete product details, including configuration, through the Original Equipment Manufacturer website without the need to create a user account.
- Warranty
- 1. The Seller shall provide a valid Warranty Certificate or Warranty Tag, in physical or digital form, issued by the Original Equipment Manufacturer, at the time of supply. The warranty shall be verifiable through the Original Equipment Manufacturer official website and or authorised customer care centre. 2. The warranty shall remain valid for the specified number of years or until the printer reaches the Original Equipment Manufacturer defined minimum number of prints during the warranty period, whichever occurs earlier. Upon reaching either of these limits, the warranty coverage shall automatically cease. 3. The Buyer may verify the actual number of prints completed by the printer at the time of delivery to confirm that the product has not been previously used. Such verification may be carried out using the printer’s in-built print counter or any other Original Equipment Manufacturer approved mechanism.. 4. The warranty shall not cover consumables, including but not limited to cartridges, toner, ink, developer, and similar consumable items.
- Operating System Supportabilit y
- 1. Products offered under this category shall support at least the Latest-2 versions of the operating systems specified in the catalogue. 2. If compatibility with an operating system version earlier than Latest-2 is required, the Buyer may specify the same under the “Additional Specification Parameter” section at the time of bid creation.
- Product Verification
- A unique device serial number shall be provided by the seller at the time of supply, which is mentioned on the product. The buyer/consignee shall be able to verify the complete product details, including configuration, through the OEM website. The buyer/consignee should be able to perform these verifications without needing to create an account on the OEM website.
- Operating System
- 1. There is no requirement that the OEM of the Desktop System should be a device partner of Microsoft or hold a valid authorisation from Microsoft. 2. Microsoft OS may be sourced directly from Microsoft by OEMs holding device partner status, and those not holding device partner status may source from authorized distributors, i.e., Ingram/Reddington and their authorized channel partners. 3. Buyers may ensure that the authorisation from Microsoft shall not be made a mandatory requirement in bids. 4. If supplies are made as per brands of OEMs who are global device partners, then the serial number of the machine supplied can be used to check the details of the product from the website of the OEM. 5. In the case of local device partners of Microsoft, OS details such as the digital key number should be produced with supplies, and the buyer may verify them from Microsoft. 6. In case of other OEMs who are sourcing from authorized distributors of Microsoft, Reddington, or Ingram, a copy of the invoice which contains the relevant serial number of Windows OS shall be submitted with supplies, and the buyer/consignee can verify the same from the OS server website or by telephone, or both. 7. In respect of verification of OS, the consignee shall take necessary steps at the time of acceptance. For device partner machines, buyers can check the Computer OEM website to verify the OS by entering the PC's serial number and part code number. For entities that are not device partners and source OS from distributors' networks, they may verify the serial number through the Microsoft website or by telephone, or both. 8. In case the product offered is with a DOS or Linux operating system, such verification of OS shall not be applicable. 9. Buyer shall request for Windows Hardware Compatibility Certificate for window operating system to ensure the supplied hardware is compatible with Windows operating system
- Requirement of OEM logo
- Buyers are advised to note that incorporating a condition stipulating an OEM logo on the motherboard is restrictive and may not be incorporated into the bids.
- Processors
- Intel and AMD Processors are added as per Model Technical Specification of Desktop Computer issued by Ministry of Electronics and Information Technology (MeitY-IPHW Division) W-43/4/2020 dated 19 Aug 2024
- Scope of Installation
- Installation requirements shall be indicated in the bid by the buyer under the Installation, Commissioning and Testing in Bid (ICT) clause. In case installation is specified in the bid, it shall be the responsibility of the seller to ensure that all systems are installed and satisfactory working is shown to the consignee or authorized representative of the buyer. However, in case of Direct and L1 Purchase, installation of the computer system by the seller/OEM is mandatory. Installation does not include the supply of antivirus, MS Office, etc., which are to be separately procured by the buyer only.
- Buyer/Consign ee Obligations relating to installation
- It is necessary that the buyer/consignee provide the seller or authorized representative access to locations, areas, or rooms for the installation of equipment. The seller or authorized representative will install systems and connect them to existing power lines/networking at no additional charge. The buyer/consignee will be responsible for electrical wiring, networking, or any other work connected to the installation area. The seller shall be only responsible for ensuring the setup of the desktop systems, configuring, etc., as well as loading software etc. (to be provided by the buyer/consignee). Any other site preparation required before installation and connection of the desktop shall be the responsibility of the buyer/consignee. The buyer/consignee, if required, will provide space at the installation site for the safe storage of tools, test equipment, and other materials used for installation at no charge. In case there is a requirement of obtaining an entry pass for allowing representatives to the premises, the same shall be arranged by the consignee. Similarly, if there is a requirement of a gate pass for bringing items required for installation, the same is to be arranged by the consignee. In scenarios where multiple location installations are required, the buyer must indicate complete installation addresses in the bid document. In the case of other modes of purchase, as soon as the order is placed, complete details regarding installation may be informed to the seller. This ensures smooth coordination and delivery of products to the respective locations.
- Warranty
- The buyer may ensure that as soon as supplies are received, a request for a warranty certificate is made, along with logging into the OEM website/call centre to verify the certificate.
- OM related to MII, Local content and MeitY advice on Model technical specifications
- Buyers are requested to refer to various OMs pertaining to DPIIT and MeitY, as issued from time to time, while making procurement and follow relevant provisions as applicable.
- Check points during Acceptance of Supplies
- Before generating the Consignee Receipt and Acceptance Certificate (CRAC), the consignee may inspect the system condition and verify that it complies with the agreed specifications and configurations. In the case of a large number of units to be procured, then the buyer may opt for bidding and accordingly stipulate conditions regarding installation, inspection by consignees/inspection agency. Consignees who receive the supplies should be vigilant and should complete checking to ensure that there is no scope for the supply of refurbished products. At the time of receiving supplies, the consignee may adhere to the following to ensure that any discrepancies in supplies can be flagged, taken into account, and reflected while generating the CRAC: i. Packing should be checked properly ii. A warranty certificate from the OEM should be insisted upon and checked. iii. Instruction manuals and the OS installed should be checked. iv. The machine serial number should also be checked through settings and can be verified from the OEM website. The above points are for guidance, and the buyer/consignee may take steps considered suitable by them for checking at the consignee end before acceptance of systems. v. An escalation matrix for customer grievance redressal shall be insisted upon by the buyer from the seller at the time of delivery.
- HDD/SSD Storage Retention
- Buyer may add their requirement of retention of securely store all Hard Disk Drives (HDDs) or Solid-State Drives (SSDs) used in the desktop computer under ATC clause.
- Higher Configuration
- The buyer may permit products delivered with advanced USB standards. For example, a USB Type-A 3.2 Gen 2 port may be acceptable in place of USB Type A Port (Version 3 point 2 Gen 1)
- OEM Website Link/Part No for product verification
- The OEM shall share the OEM website link with the buyer at the time of delivery. The offered model details/configuration should be available on their website. A unique device serial number shall also be provided at the time of supply, which is also mentioned on the product. The buyer/consignee shall be able to verify the complete product details, including configuration, through the shared OEM website link.
- Changing or altering the configuration
- The seller must refrain from changing or altering the configuration of the factory pre-loaded machine. The machine should be delivered to the Consignee in its original, factory-approved configuration.
- Warranty
- The seller shall furnish a valid warranty Certificate/Tag from the OEM to the purchaser, guaranteeing the product's coverage under the specified warranty terms. The warranty certificate should be verifiable through the OEM website/customer care centre.
- Compliance of extended producer’s responsibility
- With effect from 1.4.23, as per the E-waste rules 2022, EPR registration is mandatory for manufacturing entities. Therefore, all OEMs shall hold valid EPR registration, and the registration number should be reflected in the catalog parameter. OEMs shall ensure compliance with all responsibilities as per EPR registration applicable from time to time.
- Mandatory/Statutory requirements as applicable
- OEMs shall have to ensure compliance with the mandatory/statutory requirements as per the Government of India Notifications issued from time to time for hardware and software components, as applicable.
- Operating System
- 1. It shall be the responsibility of OEMs to ensure that supplies are made with genuine operating systems. 2. Seller shall ensure to have Windows Hardware Compatibility Certificate for window operating systems
- Scope of Installation
- It shall be the responsibility of the seller to ensure that all systems are installed, and satisfactory working is shown to the consignee or authorized representative of the buyer. However, in the case of Direct and L1 Purchase, installation of Computer System by the seller/OEM is mandatory.
- Category Specification
- 1. The seller may list products with advanced USB standards. For example, a USB Type-A 3.2 Gen 2 port may be acceptable in place of USB Type A Port (Version 3 point 2 Gen 1) 2. The supply of the monitor shall be in accordance with the parameter 'Availability of Monitor'. The details mentioned under 'Description of Store' regarding the monitor are applicable only if the monitor is being Supplied.
