Browse all bids
eProcureOpenWorks

Tiruchchirappalli Division -Upgradation of PML station (NSG5) in TPJ division- Electrical General arrangements- Works Contract

Ministry of Railways

Senior Divisional Electrical Engineer Electrical Branch, Southern Railway,Tiruchchirappalli Tiruchchirappalli

Delivers to

Tiruchirappalli, Tamil Nadu

Overview

23 facts from the tender

Ministry of Railways published this works tender on eProcure on 12 Oct 2026, for Tiruchirappalli, Tamil Nadu. The estimated value is ₹12.9 L and the EMD is ₹25,800. It closes on 5 Nov 2026, 3:00 pm IST. Tender ID 92361908 · Ref TPJ-E-27-2026-2027.

Timeline

  1. Published12 Oct 2026 · 1:00 pm
  2. Closes5 Nov 2026 · 3:00 pm

Bidding

Bid type
Open/Advertised
Contract type
Works - General · Expenditure
Tender type
Open
Tendering section
ELECTRICAL
Bidding system
Single Packet System
Bidding style
Single Rate for Each Schedule Item
Validity of offer
60 days
Completion period
90 Days
Tender document cost
None
JV / consortium
Not allowed
Ranking order
Lowest to Highest
Expenditure type
Capital (Works)
Pre-bid meeting
None

Buyer

Inviting authority
TRICHCHIRAPPALLI DIVISION-ELECTRICAL/SOUTHERN RLY
Organisation type
Central Govt. Ministry/Department
Product category
Railway related Products
Location
Tiruchirappalli, Tamil Nadu · the inviting office's place
Portal location
Chennai · as listed on eProcure
Portal
eProcure
Inviting officer
Sr.DEE/G/TPJTRICHCHIRAPPALLI DIVISION-ELECTRICAL/SOUTHERN RLY

Important dates

Published
12 Oct 2026, 1:00 pm IST
Bidding starts
22 Oct 2026
Closes
5 Nov 2026, 3:00 pm IST

Declarations by the buyer

  • Complies with the Public Procurement (Make in India) Order 2017
  • The tender inviting authority confirms this tender does not violate the GFR rules on procurement through GeM

Schedule of work

61 items
ItemQuantityRailways’ estimated rateAmount
Schedule A · Schedule of the work
01Excavation of cable / pipe trench and pits of required width, length in mixed soils conditions removing obstruction if any including tools & plants, labour etc., and as per instruction of site Engineer in charge and as per drawing No: DRM/EL/TPJ/40-2016.300 cum₹438₹1,31,400
02Dismantling of tar road including necessary tools & plant labour etc., and as per instruction of site Engineer in charge10 cum₹202₹2,020
03Demolishing plain cement concrete including disposal of material within 50m lead .Mix leaner than 1:2:4 with coarse aggregate and tools & plant labour etc., and as per instruction of site Engineer in charge.10 cum₹572₹5,720
04Demolishing plain cement concrete including disposal of material within 50m lead of mix leaner than 1:2:4 with coarse aggregate and tools & plant labour etc., and as per instruction of site Engineer in charge with the utilization of pavement breaker10 cum₹1,781₹17,810
05Providing and laying of Plain Cement Concrete by mixing of 1:3:6 including supply of cement, sand etc and tools & plant labour etc., and as per instruction of site Engineer in charge for plinth and as required at site.15 cum₹4,350₹65,250
06Supply and Laying of one layer of country bricks (breadth wise) closely.200 Each₹10₹2,000
07Refilling of cable trench and pit by excavated soil.270 cum₹50₹13,500
08Laying and testing of LTUG power cable of up to and including 50 sqmm size complete with required tools & accessories. note: LTUG power cable of required size will be supplied by Railway.1,200 Metre₹24₹28,800
09Laying and testing of LTUG Power cable above 50sqmm up to and including 185 sq.mm size complete with accessories. note: LTUG cable of suitable size only will be supplied by Railways.500 Metre₹43₹21,500
10Laying of HDPE pipe of up to and including 63mm dia including supplying and fixing of necessary accessories such as straight through coupler etc. note: HDPE pipe of suitable size only will be supplied by Railway.900 Metre₹37₹33,300
11Laying of 75 mm dia HDPE pipe including supplying and fixing of necessary accessories such as straight through coupler etc. note: HDPE pipe of suitable size only will be supplied by Railways.425 Metre₹40₹17,000
12Supply of single compression flange type brass cable gland with aluminium crimping sockets and termination including connection of LTUG cable for sizes up to and including 50 sqmm . Note: One termination comprises of one number of single flange type brass cable gland and with four numbers of aluminium crimping sockets for all cores of the cable.60 Set₹394₹23,640
13Supply of single compression flange type brass cable gland with aluminium crimping sockets and termination including connection of LTUG cable for sizes above 50sqmm up to and including 185 sqmm . Note: One termination comprises of one number of single flange type brass cable gland and with four numbers of aluminium crimping sockets for all cores of the cable.8 Set₹841₹6,728
14Fabrication, supply and fixing of clamps made out of GI flats for fabrication of clamp for fixing of cover for existing power cable / enclosures made out of sheet metal given in this schedule etc. This shall be made out of GI flat of suitable size, powder coated of suitable colour as instructed by the engineer in charge and using GI bolts with nuts of suitable size for fixing. Note: This shall be made use for fixing of cover for existing power cable and new enclosures other than enclosures already covered in the schedule.100 Kg₹136₹13,600
15Fabrication, supply and fixing of clamps made out of GI flats for fabrication of clamp for fixing of cover for existing power cable / enclosures made out of sheet metal given in this schedule etc. This shall be made out of GI flat of suitable size, powder coated of suitable colour as instructed by the engineer in charge and using GI bolts with nuts of suitable size for fixing. Note: This shall be made use for fixing of cover for existing power cable and new enclosures other than enclosures already covered in the schedule.5 Sqm₹3,146₹15,730
16Supply, placing of cast iron cable route indicators, cast iron plate type including MS flat size 40mm x6mm x 350mm length concreting and coping, painting etc complete with all other accessories as per drawing No: CEE/CN/MS/11-2004.50 Set₹541₹27,050
17Supply and fixing of medium duty GI pipe of 50 mm dia, conforming to IS.1239,part 1 (2004) , for cable leading without clamp.24 Metre₹843₹20,232
18Supply and fixing of medium duty GI pipe of 65 mm dia, conforming to IS.1239, part 1 (2004), for cable leading without clamps.24 Metre₹1,044₹25,056
19Supply and provision of sealing compound for cable leading pipe for leading of power cables of upto and including 50 sqmm size.8 Each₹92₹736
20Supply and provision of sealing compound for cable leading pipe for leading of cable of size above 50sqmm up to and including 185 sqmm.4 Each₹118₹472
21Fabrication, supply and fixing of cable looping box with aluminium bus bars as per drawing No: DRM/EL/TPJ-10-20152 Each₹7,727₹15,454
22Erection of cut rail post up to and including 5.5 feet height with foundation and accessories like base plate, including supply of two coats of each Zinc chromate primer, aluminium paint as per drawing no CEE/CN/MS/20-2004. Note : Cut rail only will be supplied by Railways.2 Set₹2,056₹4,112
23Excavation, construction of earth pit, and provision of earth pipe complete with heavy duty GI pipe 50 mm dia with ISI mark complete with all other accessories as per Drawing. No EL / P / Type 1022.10 Set₹4,977₹49,770
24Supply and laying of 6 SWG GI wire, for earth continuity confirming to IS 12776 latest.1,000 Metre₹43₹43,000
25Supply, erection, testing and commissioning of GRP enclosure 600(L)X400(W)X230(D)mm having IP66 and IK 10 protection with suitable accessories consisting of 50sqmm incoming terminal block - 4 nos, space for provision of three phase energy meter, 100Amps fuse base with fuse link - 3 nos and 1 no 100Amps neutral link and provision of earthing terminal 2 nos externally for connecting earth lead.1 Set₹24,300₹24,300
26Supply and erection of 1 No of 63A, TPN switch disconnector fuse ( cubicle) with bolted fuses and sheet steel enclosure conforming to IS 60947-3 : 2012 with duty AC 23 A complete with all other accessories.2 Each₹6,953₹13,906
27Supply, fixing, testing and commissioning of Three phase (8+12)way, vertical type double door MCB Distribution Board with 1 no of Four pole RCCB 63A, 10KA, 100mA, 1 no TPN MCB 63A, 10 KA capacity C curve as incomer and 6 nos. of 2A to 5A SP MCBs and 6 nos of 6A to 32A SP MCB 10KA capacity in outgoing , including internal wiring, bus bars, earth bar, DIN Channel etc complete with all other accessories.1 Set₹21,302₹21,302
28Supply, erection, testing and commissioning of single phase double door MCB distribuition board 6 way, with one number of 25 Amps SPN-MCB C curve, one no 2P 25A, 30mA RCCB in the incoming side and 3nos. of 2A to 5A SP MCBs and 3 nos of 6A to 32A SP MCB of 10KA capacity in outgoing including internal wiring with associated bus bars, earth bar, DIN Channel etc complete with all other accessories.1 Set₹8,982₹8,982
29Supply and wiring of extension mains through PVC pipes already fixed / embedded by three runs of single core FRLS PVC insulated 1100V Grade ISI marked flexible multi stranded copper wiring cable including green colour wire for earth of 1.50 sqmm size, conforming to IS.694, 2010 as per specification. Note : 3 runs of 1.5sqmm copper cable added together shall be taken as 1m for measurement purpose.700 Metre₹87₹60,900
30Supply and wiring of extension mains through PVC pipes already fixed / embedded by three runs of single core FRLS PVC insulated 1100V Grade ISI marked flexible multi stranded copper wiring cable including green colour wire for earth of 2.50 sqmm size, conforming to IS.694, 2010 as per specification. Note : 3 runs of 2.5sqmm copper cable added together shall be taken as 1m for measurement purpose.200 Metre₹136₹27,200
31Supply and wiring of extension mains through PVC pipes already fixed / embedded by three runs of single core FRLS PVC insulated 1100V Grade ISI marked flexible multi stranded copper wiring cable including green colour wire for earth of 4.0 sqmm size, conforming to IS.694, 2010 as per specification. Note : 3 runs of 4.0sqmm copper cable added together shall be taken as 1m for measurement purpose.100 Metre₹188₹18,800
32Supply and fixing of modular type single pole one way switch of 6 A capacity, one module type, in the already fixed modular type switch board including internal wiring. This shall be similar to cat. Ref. No:675501 of Mylinc model of M/s. Legrand make or equivalent.50 Each₹122₹6,100
33Supply and provision of modular type socket 6 A capacity, 2/3 pin combined, two module type in the already fixed modular type switch board including internal wiring. This shall be similar to cat. Ref. No:675550 of Mylinc model of M/s. Legrand make or equivalent.15 Each₹240₹3,600
34Supply and provision of modular type socket of 6 A / 16 A capacity, three pin combined, two module type, in the already fixed modular type sub control board including internal wiring. This shall be similar to cat. Ref. No:675555 of Mylinc model of M/s. Legrand make or equivalent.5 Each₹389₹1,945
35Supply and provision of modular type single pole one way switch of 16 A capacity, one module type, in the already fixed modular type sub control board, including internal wiring. This shall be similar to cat. Ref. No:675511 of Mylinc model of M/s. Legrand make or equivalent.5 Each₹222₹1,110
36Fixing and testing of box type LED tube light luminaire complete with required accessories as per standard. Note : Box type fitting with lamp only will be supplied by Railways.44 Each₹116₹5,104
37Supply at site, fixing, testing and commissioning of LED 36 W Recessed Luminaire complete with all the other accessories. This includes supply at site, fixing and testing of recess mounted slim flat square panel type LED luminaire with of 36 W rating with LED driver of suitable rating etc. The housing is made of white powder coated aluminium (or CRCA sheet) provided with poly carbonate milky diffuser including fixing accessories such as buckles etc and suitable for indoor operation. The fitting shall be 2 feet X 2 feet X 0.5 inch thick (i.e. 595 mm X 595 mm size and 10 mm thick) approximate. The luminaire shall be fixed in a suitable manner as per the site requirement including making necessary cut in the false ceiling. .Warranty - 5 years from date of supply.6 Each₹2,865₹17,190
38supply and fixing of LED 12 W Recessed Luminaire complete with all the other accessories. This includes supply at site, fixing and testing of 12 W LED type, round, recessed mounted luminaire complete with LEDs, driver of suitable rating etc. The body is made of white powder coated aluminium (or CRCA sheet) with poly carbonate diffuser including fixing accessories, suitable for indoor operation. The size of the fitting shall be 7 Inches X 0.8 inches in diameter approximate (i.e. 173 mm X 20 mm diameter approximate). This shall be fixed in a suitable manner using fixing clamps supplied along with the light fitting including making necessary cut in the false ceiling. .Warranty - 5 years from date of supply.10 Each₹986₹9,860
39Fixing of ceiling fan as per standard with required accessories. note: Ceiling fan complete set only will be supplied by Railway.12 Each₹200₹2,400
40Supply, fixing and testing of exhaust fan, single phase type, 200 mm sweep including wall opening, fixing of frame and plastering complete and with all required accessories.4 Each₹2,233₹8,932
41Supply at site, fixing, testing and commissioning of 12W Bulk head fitting with lamp. This shall be similar to cat ref. LBKOVSL12 of M/s Luker make or equivalent.8 Each₹589₹4,712
42Supply and provision of Blanking plate, one module type, to close dummy ways in the modular type switch board already fixed. This shall be similar to cat. Ref. No:675590 of Mylinc model of M/s. Legrand make or equivalent.10 Each₹42₹420
43Supply and fixing of Modular type fan regulator, one module type of 100 W raring, 0-4 step type on the already fixed modular type switch board including internal wiring. This shall be similar to cat. Ref. No:675531 of Mylinc model of M/s. Legrand make or equivalent.6 Each₹600₹3,600
44Supply and fixing of 6A, 3 plate PVC ceiling rose, ISI marked, including termination of wiring.40 Each₹46₹1,840
45Supply and fixing of PVC Round block with required fixing accessories.20 Each₹16₹320
46Supply and wring to luminaires with 3 Core 0.75 sqmm, PVC insulated and sheathed flexible copper cable, 1100 V grade, conforming to IS.694 2010.40 Metre₹58₹2,320
47Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required.2 Each₹1,271₹2,542
48Supply and fixing of 63 Amps Four pole DMC connector for cable termination.2 Each₹88₹176
49Supply and fixing of SMC box of 170 mm X 170 mm X 105 mm outer dimensions size with one nmber of 16 A, 240 V rewirable fuse unit, 3 plate 6 A ceiling rose and one number of 16 A PVC strip connector including fixing with required accessories.38 Each₹829₹31,502
50Supply and provision of 20 mm OD, rigid, heavy duty, PVC wiring conduit with ISI mark, 2 mm thick, conforming to IS.9537 part 1 and 3: 1983, suitable for electric wiring by surface with necessary accessories such as PVC junction boxes of required ways, bends, coupling, elbows, Tees, couplings etc ceiling / beam and wall opened for PVC pipes, as per specification.300 Metre₹75₹22,500
51"Supply and fixing of Poly carbonate box similar to Hensel Model No. Mi 0600/0601 in the PF shelter for cable termination with the following, 1) 25x3x200mm 6Nos. of Copper Bus bar 2) 1P MCB 2A - 8Nos. Note : 1) The 2.5 Sq.mm size Flame Retardant Low Smoke & Halogen (FR- LSH) PVC insulated single core multistranded flexible copper cable with ISI mark has to be used for connecting between Copper bus bar and MCBs. 2) Out going from MCBs has to be neatly wired and covered as directed by site engineer in charge.4 Each₹23,000₹92,000
52Supplying and installaton of 150mm width x 50mm depth x 1.6mm thickness perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers MS/GI Suspenders i/c base of suitable size MS/GI angle, bolts & nuts, painting suspenders, fastener etc as required.160 Metre₹686₹1,09,760
53"Supply and fixing of Transparent Poly carbonate box of similar to model No. Mi 0300/0301 in the PF shelter for cable termination with 1 No. of 200A 4 Way Connector. Note : For 24 Hrs supply, Stall supply etc...4 Each₹9,000₹36,000
54Supply and provision of suitable foundation for the octagonal poles including excavation of pit, shuttering and erection of octagonal pole as per drawing No: DRM/EL/TPJ/37-2018.25 Each₹3,415₹85,375
55Supply and fixing of 16 amps Bakelite fuse unit, 2 Amps MCB B series 10KA capacity, 20 amps SMC connector on 5mm thick SMC sheet inside the Octagonal Poles. The price offered shall be inclusive of the cost of supply and fixing of 16A fuse unit , 2A MCB B series, 20A SMC connector in 5mm thick SMC sheet inside octagonal pole. The cost offered shall be inclusive of the cost of labour charges for terminating the incoming cable in the octagonal pole. The MCB and other accessories shall be confirming to relevant IS specifications. The cable shall be terminated with suitable cable lugs to avoid loose connection in future.25 Each₹772₹19,300
56Wiring of light points through octagonal pole with 3 core 1.5 sq.mm wire. The price offered shall be inclusive of the cost of 1.5 sq mm wire PVC insulated copper cable three numbers one for phase, one for neutral and one for earth or 3 core 1.5 sq mm PVC insulated copper cable confirming to IS 694 : 2010 for extending the power supply from the terminal box to the lamps erected on the pole. No intermediate joints will be permitted in copper cable. The price offered shall be inclusive of the cost of labour charges required for wiring the lamp post. If the pole is fitted with double arm arrangement for providing two light fittings, Two sets of cable shall be provided. Measurement will be taken as two for double arm lamp post whereas measurement for this item will be counted as one when pole is equipped with single light fitting.25 Each₹842₹21,050
57Dismantling cum removal of existing lighting poles from the site and handing over of the same as instructed by the Engineer-in-Charge.25 Each₹550₹13,750
58Fixing and testing of street light / flood light luminaires with required accessories such as GI bolts with nuts, clamps, arm brackets etc as per the instructions of Engineer-in-Charge. note: Street light type / flood light type LED luminaire only will be supplied by Railway.29 Each₹181₹5,249
59Erection, testing and commissioning of submersible pumpset including control panel complete with required accessories as per standard. note: Borewell submersible pump set and control panel only will be supplied by Railway.2 Each₹2,730₹5,460
60Fixing and testing of uPVC pipe as per standard including supply of all required accessories, straight through couplers etc including required fabrication works. Note: UPVC pipe only will be supplied by Railways.60 Each₹19₹1,140
61Supply and laying of three core submersible flat cable 2.5sqmm, conforming to IS694.100 Metre₹142₹14,200
Total₹12,88,727

Bids quote a rate in rupees for each item · The total matches the advertised value.

Documents

10 files

Documents to submit

Commercial-Compliance

  • PAYMENT OF BID SECURITY (EMD) The Bid Security shall be deposited either in cash through e-payment gateway or submitted as Bank Guarantee bond (BG) from a scheduled commercial bank of India or as mentioned in tender document. The BG shall be valid for a period of 90 days beyond the bid validity period. The BG for the value of Bid Security mentioned in tender document, shall be drawn in favour of "Senior Divisional Finance Manager, DRM office, Southern Railway, Tiruchchirappalli", on account of the contractor and the original Bank Guarantee should be delivered in person to "The Senior Divisional Electrical Engineer (Traction Distribution branch), DRM office, Southern Railway, Tiruchchirappalli", before closing date for submission of bids, excluding the last date of submission of bids. Scanned copy of Bank Guarantee submitted for Bid Security shall be uploaded. It is mandatory to upload the copy of BG if it is chosen to submit the Bid Security in the form of Bank Guarantee. Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non- Submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid.

    Document optional
  • PAN COPY Copy of PAN Card shall be uploaded.

    Document optional
  • GST REGISTRATION CERTIFICATE Copy of GST Registration Certificate shall be uploaded.

    Document optional
  • NEFT MANDATE :Bank official certified, filled-in copy of 'Electronic Fund Transfer Mandate form' (NEFT Form) containing tenderer's bank account details such as Name of the Bank, Bank Branch Code, Account Number, IFSC Code, etc., shall be uploaded.

    Document optional
  • ASSOCIATION WITH RETIRED RAILWAY EMPLOYEE The Contractor shall abide by the instructions contained in the Clause No.16 of Annexure I of Part I and Clause No. 59(9) of Part II of Indian Railways Standard General Conditions of Contract, April 2022. In this connection, the contractor shall clearly furnish the details of employment / partnership, etc., of retired Railway employees, if any. In case of no retired railway employee associated with the firm, a statement as per the sample format at Instruction to tenderer., failing which the offer will be summarily rejected.

    Document required
  • CONSTITUTION OF THE TENDERER'S FIRM The tenderer shall clearly specify whether the tender is submitted on his own (proprietary firm) or on behalf of a partnership Firm / Company / Joint Venture(JV) / Registered Society / Registered Trust / HUF / LLP etc. Based on their constitution of the firm, they must submit the mandatory documents mentioned hereunder, as applicable and if same is not submitted the offer will be summarily rejected. The tenderer(s) shall enclose the attested copies of constitution of their concern, and copy of PAN card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the Firm, Company, Association, Trust or Society, as the case may be.

    Document required
Show all 22
  • a)If the tenderer is a Sole Proprietorship Firm, they shall submit the notarized copy of an affidavit in this regard along with copy of their Pan card, failing which the offer will be summarily rejected.

    Document required
    1. If the tenderer is a Hindu Undivided Family (HUF), they shall submit a copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF.
    2. If the tenderer is a Partnership Firm, they shall submit
      1. a notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar,
      2. a notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm,
      3. an undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt, of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm / LLP in which they were / are partners / members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract, failing which the offer will be summarily rejected.
    Document required
  • d) If the tenderer is a Joint Venture (JV) - (If Applicable), they shall submit all the relevant documents as mentioned in para 17 of the Tender Form (Second Sheet) of GCC. (A tender from JV shall be considered only where permissible as per the tender conditions)

    Document optional
  • e)If the tenderer is a Company registered under Companies Act 2013, they shall submit

    1. the copies of MOA (Memorandum of Association) and AOA (Articles of Association) of the company,
    2. a copy of Certificate of Incorporation and
    3. a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company, failing which the offer will be summarily rejected.
    Document required
  • f)If the tenderer is a LLP (Limited Liability Partnership), they shall submit

    1. a copy of LLP Agreement,
    2. a copy of Certificate of Incorporation,
    3. a copy of Power of Attorney / Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP,
    4. an undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Government of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm / LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract and
    5. all other relevant documents in terms of Para 10 of the Tender Form (Second Sheet) of GCC.
    Document optional
    1. If the tenderer is a Registered Society & Registered Trust, they shall submit
    2. a copy of Certificate of Registration,
      1. a copy of Memorandum of Association of Society/Trust Deed,
      2. a copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust,
      3. a copy of Rules & Regulations of the Society and
      4. all other relevant documents in terms of Para 10 of the Tender Form (Second Sheet) of GCC.
    Document optional
  • POWER OF ATTORNEY The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association/Board resolution, failing which offer shall be summarily rejected. INSTRUCTIONS REGARDING LC - PART 1 :

    1. For all the tenders having advertised cost of Rs. 10 lakh or above, the contractor shall have the option to take payment from Railways through a letter of credit (LC) arrangement.
    2. This option of taking payment through LC arrangement has to be exercised in IREPS (Indian Railway Electronic Procurement System - the e- application on which tenders are called by Railways) by the tenderer at the time of bidding itself, and the tenderer shall affirm having read over and agreed to the terms and conditions of the LC option.
    3. The option so exercised, shall be an integral part of the bidder's offer.
    4. The above option of taking payment through LC arrangement, once exercised by tenderer at the time of bidding, shall be final and no change shall be permitted, thereafter, during execution of contract.
    5. In case tenderer opts for payment through LC, following shall be the procedure to deal release of payment through LC:
      1. The LC shall be a sight LC.
      2. The contractor shall select his Advising/Negotiating bank for LC. The incidental cost towards issue of LC and its operation thereof shall be borne by the contractor.
      3. SBI, New Delhi, Main Branch will be the nodal branch for issue of LCs based on onlinerequests received from Railway Accounts Units for tenders opened in financial year 2018-19. SBI branches where the respective Railway Accounts Office has its Account (local SBI branch) will be the issuance/reimbursing branch for LC issued under this arrangement. The Bank shall remain same for this tender till completion of contract. The incidental cost @ 0.15 % per annum of LC value, towards issue of LC and operation thereof shall be borne by the contractor and shall be recovered from his bills.
      4. The LC shall be opened initially for duration of 180 to 365 days in consultation with contractor. The LC shall be extended time to time as per the progress of the contract, on the request of the contractor. The value of LC to be opened initially as well as extended thereafter shall be finalised by the engineer in consultation with the contractor on the basis of expected progress of work.
      5. The LC terms and conditions shall inter-alia indemnify and save harmless the Railway from and against all losses, claims and demands of every nature and description brought or recovered against the Railways by reason of any act or omission of the contractor, his agents or employees, in relation to the Letter of Credit (LC). All sums payable/borne by Railways on this account shall be considered as reasonable compensation and paid by contractor. INSTRUCTIONS REGARDING LC - PART 2 :
      6. The LC terms and conditions shall inter-alia provide that Railways will issue a Document of Authorisation after passing the bill for completed work, to enable contractor to claim the authorized amount from their bank.
      7. The acceptable, agreed upon document for payments to be released under the LC shall be the Document of Authorisation.
      8. The Document of Authorisation shall be issued by Railway Accounts Office against each bill passed by Railways.
      9. On issuance of Document of Authorisation, a copy of Document of Authorisation shall be posted on IREPS for download by the contractor. A digitally signed copy of Document of Authorisation shall also be sent by Railway Accounts Office to Railway's bank (Local SBI Branch).
      10. The contractor shall take print out of the Document of Authorisation available on IREPS and present his claim to his bank (advising Bank) for necessary payments as per LC terms and conditions. The claim shall comprise of copy of Document of Authorisation, Bill of Exchange and Bill.
      11. The payment against LC shall be subject to verification from Railway's Bank (Local SBI Branch).
      12. The contractor's bank (advising bank) shall submit the documents to the Railways Bank (Local SBI Branch0.
      13. The Railway's bank (issuing bank) shall, after verifying the claim so received w.r.t. the digitally signed Document of Authorisation received from Railway Accounts Office, release the payment to contractor's bank (advising bank) for crediting the same to contractor's account.
      14. Any number of bills can be dealt within one LC, provided the sum total of payments to contractor is within the amount for which LC has been opened.
      15. The LC shall shall be closed after the release of final payment including PVC amount, if any, to the contractor.
      16. The release of performance guarantee or security deposit shall be dealt directly by Railway with the contractor i.e., not through LC.
    Document required
  • PAYMENT OF TENDER DOCUMENT COST The tenderer shall deposit the Tender Document Cost (If applicable) as stipulated in the tender document, ONLY through online modes as permitted in IREPS application.

    Document optional
  • Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

    Document optional

Technical-Compliances

  • ELECTRICAL LICENSE :The contractor should have a valid Electrical Contract License for working in HT/LT systems, having system voltage equal to or more than 650 V, from the concerned statutory authority of any States of India. It must be ensured that the validity of electrical license should be valid during the entire contract period, duly renewing at appropriate time. The tenderer should submit a copy of license along with his offer. During offer submission, in case the validity of the Electrical license is expired, the copy of the license renewal application submitted to the concerned statutory authority shall be submitted along with the copy of the expired license and it will be considered for acceptance. However, if the contractor is having experience in Railway's works (based on their submissions), his / her offer will be considered for acceptance based on a declaration stating that the license copy will be submitted before the start of the work and such declaration shall be uploaded in the required in place in IREPS. Such contractor shall avail and submit Electrical license copy before start of the work and the agreement will be signed only on receipt of copy of Electrical license. The electrical license should be in the name of the firm or in the name of any authorized person of the tenderer's firm or if the tenderer is hiring an Electrical licensee for supervising / overseeing this work, the copy of his Electrical license along with an authorization letter for supervising / overseeing this work under his license shall be submitted.

    Document optional
  • MATERIAL FROM APPROVED SOURCES All the materials / equipments / fittings / components required for the successful completion of the work shall be procured only from RDSO / CORE approved sources. If for any item, no RDSO/CORE approved sources are available, the said item conforming to relevant RDSO specification/drawing shall be procured from other sources.

    Document optional
  • All the required / supporting documents should be scanned and uploaded.

    Document optional

Custom

  • On IREPS Module, a facility has already been created for online submission of Annexure-V as per GCC correction slip. if there is no online facility for submissionAnnexure V . The bidder should submit the copy of Annexure V through IREPS module manually while uploading the tender, failing which the bid will be summarily rejected

    Document required
  • The tenderers shall submit a copy of certificate stating that all their statements/documents submitted along with bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-V. In addition to Annexure- V, in case of other than Company/Proprietary firm. Annexure -V(A) shall also be submitted by the each member of a Partnership Firm/ Joint Venture (JV) / Hindu Undivided Family (HUH / Limited Liability Partnership (LLP) etc, as the case may be. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.

    Document required
  • The firm registered as start ups in DIPP are exempted from payment of Bid security/EMD and they have to submit Annexure I in GCC April2022 for claiming,failing which the bid will be summarily rejected

    Document required
  • All the documents which are mentioned mandatory in the NIT has to be submitted by the tenderer through IREPS while participating in the tender.

    Document required

Non submission of above certificate(s)by the bidder shall result in summarily rejection of his/their bid.

Commercial conditions

EMD
₹25,800
Tender fee
None

Terms & conditions

19 conditions

Commercial-Compliance

  • RATES ARE ALL INCLUSIVE All rates quoted by the tenderer for this work tenders shall be deemed to be inclusive of all taxes, duties, royalties, octroi, cess etc. payable by the contractor to the Govt. or any public body and no additional amount / rate or claim will be entertained on this account by the Railways. Also no claim whatsoever will be accepted by Railways on account of revision of tax rates, new taxes of statutory nature by State/Central Govt, unless otherwise any specific instruction from the statutory authorities as per extant rules.

  • MUTUALLY BINDING If the tenderer's offer is accepted, until the formal agreement is executed, acceptance of this tender shall constitute a binding contract between Railways and the tenderer / contractor, subject to modifications, as may be mutually agreed to between Railways and the tenderer / contractor and it will be indicated in the letter of acceptance of the tenderer / contractor's offer for this work.

  • ABIDANCE WITH GCC & ALL CONDITIONS I / We also hereby agree to abide by the Indian Railways Standard General Conditions Of Contract, with all correction slips up-to-date and to carry out the work according to the Special Conditions of Contract and Specifications of materials and works as laid down by Railway in the annexed Special Conditions of contract , General Instructions and conditions, explanatory notes for schedule of work and all the Annexures.

  • OFFER VALIDITY I/We agree to keep this offer open for acceptance, during offer validity period as mentioned in the tender document, from the date of tender opening and in default thereof I/We will be liable for forfeiture of my/our Earnest Money. I/We offer to do the work for Railway, at the rates quoted in the attached Schedule and hereby bind myself/ourselves to complete the works in all respects.

  • RIGHTS OF RAILWAYS TO INCLUDE CONDITIONS :Railways shall have the right to incorporate any such condition quoted by tenderer, in the contract, at Railway's discretion, if contract is placed on the tenderer.

  • TENDERER TO READ ALL CONDITIONS I/We have read the various conditions attached/ referred to in this tender document, and agree to abide by the said conditions.

  • I/We hereby Confirm that the rates, rebates and/or other financial terms, if any, quoted by us in the relevant fields of the Financial Bid page will only be the ruling terms for deciding the inter-se ranking, and any such condition having financial repercussions, if quoted by us anywhere else including attached documents shall not be considered for deciding inter-se ranking

General Instructions

  • Before quoting the rates for schedule items, the Schedule shall be read in conjunction with its explanatory notes for detailed description of various items included therein.

  • Indian Railways Standard General Conditions of Contract, GCC, April 2022, including all it's correction slips, upto date is applicable for this contract.

  • Provision of the GST Act is effective across the country from 1st July, 2017. Hence, this contract would be subjected to GST Act & Rules as applicable from time to time.

Show all 19
  • I f the Tenderer (s) deliberately give(s) wrong information/incorrect documents in his/their tender o r create circumstances for the acceptance of his/their tender , the Railway reserves the right to reject such tender at any stage. The entire EMD and any other dues available with Railway against that contract will be forfeited. Action will b e taken t o suspend the business with the tenderer for a period of one year . In addition, Administration reserves the right to prosecute the tenderer under suitable law.

  • All terms and conditions in the tender documents are binding on the Tenderers.

  • Railways reserves the right t o accept o r reject any or all the tenders and to award t h e work i n whole o r i n part without assigning the reason for any such action.

  • The Tenderers are advised to visit the site of work in their own interest and acquaint themselves with the site conditions and expected quantum o f work and assess all the site specific difficulties to be experienced while executing the same and the rate shall be arrived duly considering all the facts above and quoted in the tender. Any representation at a later date specifying the site difficulties shall not be considered.

  • T h e tenderer shall go through the entire tender documents thoroughly and strictly adhere the instructions and directions given at different pages.

  • Tender Document Cost once paid is non-refundable.

  • Unreleased EMD of any tenderers, if any, held with the Railway Administration, shall not be adjusted towards the EMD to be remitted.

  • Contractors are allowed TO make payments against this tender towards tender document cost (if applicable) ONLY through ONLINE payment modes available in IREPS portal, LIKE net banking, debit card, credit card etc. MANUAL payments through Demand draft, Banker cheque, Deposit receipts, FDR etc. are NOT allowed.

Special Conditions

  • No eligibility criteria is required for works costing less than 50lakhs

Bidder declarations (2)

Undertakings

  • I/We have visited the works site and I/We am/are aware of the site conditions.

  • The tenderer / contractor shall note that the benefit of subsidy, if any, should be passed on to Railway. Hence, if subsidy is available, while quoting the rate, the same shall be taken into account and indicate the amount of subsidy considered separately. If no subsidy is available, the same may also be indicated.

Similar open tenders

Soonest first

Search similar in the explorerFind this tender in the explorer

Tender notice (PDF)