Browse all bids
eProcureOpenWorks

Electrical General service portion of work in connection with Crowd Management System at Solapur, Kalaburgi, Wadi, Latur, Osmanabad, Kurduwadi, Harangul & Pandharpur Road Railway Station of Solapur D…

Ministry of Railways

DRM OFFICE RAILWAY LINES SOLAPUR

Delivers to

Solapur, Maharashtra

Overview

23 facts from the tender

Ministry of Railways published this works tender on eProcure on 13 Oct 2026, for Solapur, Maharashtra. The estimated value is ₹4.7 Cr and the EMD is ₹9.4 L. It closes on 9 Nov 2026, 3:00 pm IST. Tender ID 91123789 · Ref SUR-L-T-2025-35R.

Timeline

  1. Published13 Oct 2026 · 6:51 pm
  2. Closes9 Nov 2026 · 3:00 pm

Bidding

Bid type
Open/Advertised
Contract type
Works - General · Expenditure
Tender type
Open
Tendering section
WORKS
Bidding system
Single Packet System
Bidding style
Single Rate for Each Schedule
Validity of offer
60 days
Completion period
12 Months
Tender document cost
None
JV / consortium
Not allowed
Ranking order
Lowest to Highest
Expenditure type
Capital (Works)
Pre-bid meeting
None

Buyer

Inviting authority
SOLAPUR DIVISION-ELECTRICAL/CENTRAL RLY
Organisation type
Central Govt. Ministry/Department
Product category
Railway related Products
Location
Solapur, Maharashtra · the inviting office's place
Portal location
Mumbai CST · as listed on eProcure
Portal
eProcure
Inviting officer
Sr.DEE/G/SURSOLAPUR DIVISION-ELECTRICAL/CENTRAL RLY

Important dates

Published
13 Oct 2026, 6:51 pm IST
Bidding starts
26 Oct 2026
Closes
9 Nov 2026, 3:00 pm IST

Declarations by the buyer

  • Complies with the Public Procurement (Make in India) Order 2017
  • The tender inviting authority confirms this tender does not violate the GFR rules on procurement through GeM
  • Bidders from a country sharing a land border with India must be registered with the competent authority

Schedule of work

105 items
ItemQuantityRailways’ estimated rateAmount
Schedule 1 · Schedule
01Provision of concealed Light point as per specification₹7,89,200
02Provision of concealed ceiling fan point wiring as per specification.₹3,45,275
03Provision of concealed 6A plug point as per specification.₹1,80,013.60
04Provision of concealed 16A plug point as per specification₹94,744
05Provision of concealed Submain 2.5 Sq.mm as per specification.₹3,32,000
06Provision of concealed Submain 4.0 Sq.mm as per specification.₹2,59,754
07Provision of concealed Submain 6.0 Sq.mm as per specification.₹18,481.40
08Provision of Light point (Casing/Capping type) as per specification₹8,68,607
09Provision of Fan Point wiring (Casing/Capping type) as per specification₹1,84,810
10Provision of PVC Casing/Capping type 6A plug point as per specification.₹29,466
11Provision of PVC Casing/Capping type 16A plug point as per specification₹20,937.60
12Provision of Submain 4.0 Sq.mm as per specification.₹1,49,397
13Provision of Submain 2.5 Sq.mm as per specification.₹1,26,600
14Provision of USB power charger for mobile as per specification.₹7,93,025.25
15Supply & fixing of exhaust fan (Sweep Size:-300mm) as per specification₹2,45,520
16Provision of Wall mounted 400 mm fan as per specification.₹1,85,302
17Provision of ELCB/RCCB (Single Phase-32A) as per specification₹3,91,452
18Supply and erection of super energy efficient ceiling fan 1400 mm (BLDC) as per specification₹42,78,833
19Supply and fixing of distribution board with 32 Amps DP MCB for incoming and 04 Nos 16 Amps SP MCB, 04 Nos 10 Amps SP MCB for outgoing as per specification₹1,72,150
20Supply and fixing of main distribution board with 32 A DPMCB as per specification.₹49,375
21SETC of 3 phase distribution board comprising of 1) 63 Amps TPN MCB - 01 Nos 2) 32 Amps TPN MCB TPN - 02 Nos, 3) 16 Amps MCB - 06 Nos as per specification₹4,11,305
22Supply & fixing of Air circulator fan 600 mm sweep as per specification₹1,98,385.50
23Provision of (18-22 W) 4 feet LED Tube lights as per specification₹1,30,170
24Provision of (9-12 W) 2 feet LED Tube lights as per specification₹13,003
25Supply, Erection, Testing and commissionning of 36-40W LED tube light as per specification.₹7,50,990
26Provision of LED street light 60 W as per specification.₹2,06,709.60
27Provision of LED street light 30-33 W as per specification.₹3,64,500
28Provision of 200W Non integral LED flood lights as per specification.₹4,91,214.40
29Supply and fixing of panel light LED recess / surface mounted (2 feet X 2 feet) as per specification.₹8,17,812
30Supply and fixing of panel light LED recess / surface mounted (1 feet X 1 feet) as per specification.₹1,84,476
31Provision of decorative wall light as per specification.₹57,732
32Provision of LED fixture warm/white light type (UP and Down light) as per specification.₹1,31,465
33"JKSSE LED Garden Light 60 Brand: JKSSE (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687722362419 dt.01/05/2024)"₹4,05,000
34SETC of Decorative Double Arm Pathway streetlight pole with LED as per specification.₹6,85,022.40
35Supply and fixing of FRP/ Metalic junction box as per specification₹21,868
36Provision of 3 core 1.5 sqmm PVC insulated flexible copper cable as per specification.₹84,420
37Provision of auto control timer switch control with MCB double pole, timer switch and magnetic contractor as per specification.₹36,624.10
38Supply, installation, testing and commissioning of 11.00 TR Aircooled Ductable Split Inverter Type unit with microprocessor based control panel, compressor and suitable for refrigerant R410a With all accessories as per specification₹11,42,285.88
39Supply and fixing of Refrigerant Piping with Hard Drawn Copper pipe/ Tube of various sizes withaccessories to connect condenser unit and cooling coil including suction and discharge line as per specification₹1,39,371.60
40Supply, fabrication and installation of ducting 22 Guage with all necessary Supports and thermal insulation as per specification₹1,88,146.40
41Supply, fabrication and installation of ducting 24 Guage with all necessary Supports and thermal insulation as per specification₹9,87,768.60
42Supply & fixing for return air aluminium powder coated special Diffuser/Grills as per specification₹24,266.40
43Supply, installation, testing and commissioning of Ancillary Copper Items like hand set valves, filter drier, relief valve, dead cap, angle valve as per specification.₹35,327.84
44Supply & fixing of water proof flexible canvas connection as per specification₹2,348.56
45Supply, erection, testing and commissioning of PVC drain pipe 2 Inch (50 mm) as per specification₹17,261.40
46Supply, installation, testing and commissioning of Control Panel for Safety interlocks for Ductable Units as per specification₹2,20,302.80
47SETC of split type AC units 2.0 Ton inverter type as per specification₹22,21,839.60
48Supply and fixing of copper tube 3/8" with insulating material.₹48,145.50
49Supply and fixing of copper tube 1/4" as per specification.₹12,725
50Provision of 1/2" PVC drain pipe as per specification.₹15,904
51Supply and fixing of PVC channel as per specification₹29,962.40
52Supply and erection of Digital timer as per specification.₹23,799.80
53Provision of voltage stabilizer suitable to 2.0 Ton inverter type AC as per specification₹1,14,904
54Supply of round cable 4 x 4 sqmm (56/0.30) PVC insulated sheathed wire copper conductor, 1100 volts grade as per specification.₹24,817.50
55Supply, erection, testing and commissioning of 16 mtrs High mast tower polygonal shape suitable for 12 luminaries for wind speed upto 180 km/hr including head frame pulley assembly winch bracket lantern carriage ring luminaries CG boxes arms resting as per specification₹14,35,022.80
56Provision of foundation of above high mast tower as per specification.₹2,38,667.44
57Provision of maintenance free earthing as per specification.₹10,82,609
58Provision of Earth pit box with cover as per specification.₹2,17,219.20
59Supply,Fabrication & Erection of Panels for fixing of microprocessor based MCCBs of various capacity with bus bar arrangement as per specification₹36,00,000
60"Providing & erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact. MCCB should have phase barriers both sides, with insulation withstand capacity 800V,no line-load bias in provided enclosure /panel as per specification"₹5,49,425.92
61Providing & erecting 4 Pole MCCB, 4 l5V, 200A, rated short-circuit breaking capacity 25 kA (lcs=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification. (Microprocessor based)₹1,88,475.30
62Supply and erection of 4 Pole MCCB, 4l5V, up to 100A, rated short-circuit breaking crtpacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, n o line-load b i a s i n provided enclosure/panel as per specification. (Microprocessor based)₹98,689.50
63Supply of 63 Amp 4 pole MCCB with breaking current capacity 16 KA (Microprocessor based)₹84,540
64Provision of Feeder Pillar (junction box) (200 A Capacity) as per specification.₹89,164.40
65Provision of Feeder Pillar (junction box) (400 A Capacity) as per specification.₹60,450.21
66Supply, installation, testing & commissioning of 40A (4+2) conductors, 3 phase 4 wire busduct trunking system with centre/ end feed unit with MCB, straight lengths, 3 meterswith 3 outlets, end covers, connectors, ceiling bracket holder, suspension clamp, nuts,bolts, wall bracket suspension hook, snap clamp etc. All suspension accessories shall beeither galvanized or powder coated.₹1,06,62,715
67Supply, installation, testing & commissioning of junction box/ plug in box/tap off box ofbus trunking system to light/ fan points with 3 core x 1.0 sq.mm FRLS PVC insulated cablein PVC conduit as required to complete the wiring connection including all materialrequired for fixing arrangement.₹1,12,110
68Supply, installation, testing & commissioning of flexible bend for 40A (4+2) conductors, 3phase 4 wire bus duct trunking system including all necessary components for connecting two ends of bus trunking.₹12,18,598.80
69Provision of XLPE insulated LT cable 4 X 16 sq mm as per specification₹1,17,030
70Provision of XLPE insulated LT cable 4 X 25 sq mm as per specification₹2,32,425
71Provision of XLPE insulated LT cable 4 X 50 sq mm as per specification₹3,92,565
72Provision of XLPE insulated LT cable 4 X 70 sq mm as per specification₹4,31,535
73Provision of XLPE insulated LT cable 4 X 95 sq mm as per specification₹4,19,660
74Provision of XLPE insulated LT cable 4 X 120 sq mm as per specification₹7,02,420
75Provision of XLPE insulated LT cable 4 X 300 sq mm as per specification₹18,91,965
76Excavation of trench and laying of cable in open yard/ circulating area/Soft Surface as per specification.₹5,63,500
77Laying of cable on wall/Truss (including clamp) structure as per specification₹73,775
78Supply and laying of DWC / HDPE (Inner Dia.100 mm and Outer Dia.120 mm) pipe for enclosing cable below ground surface.₹1,45,512
79Supply and laying of DWC / HDPE (Inner Dia 60 mm and Outer Dia.74 mm) pipe for enclosing cable below ground surface.₹78,250
80Supply and fixing of GI pipe (50 mm Dia.) Class B for encasing cable below ground surface.₹22,004
81Supply and laying Hot dipped Galvanized Perforated type 400 mm width & 75 mm height Cable tray manufactured from 16 swg (1.6 mm thick) GI sheet complete with necessary coupler plates& hardware etc. as per specification₹5,06,135
82Supply and installation of water coolers 150 ltrs capacity with fully stainless steel body as per specification₹3,97,212.96
83Supply & fabrication & fixing of safety cage for water cooler as per specification₹2,70,897.76
84Provision of voltage stabilizer suitable for water cooler as per specification.₹12,959.04
85Supply, erection, testing and commissioning of 10 HP mono submersible pumpset discharge 1000 - 400 LPM at 15 - 32 M head as per specification₹79,578.42
86Mono Submersible pump 15 HP Suitable at Open Well/GLR, 550-1750LPM Delivery, Operating on 415V, 50Hz, 3Phase AC Supply Conforming to IS:14220₹60,958.80
87Supply, erection, testing and commissioning of control gear, control panel complete with star delta starter, suitable for 5 to 15 HP, pump guard SPP and all protective devices as per specification₹36,707.68
88Provision of GI pipe 75 mm dia C class as per specification.₹11,299.20
89Provision of NRV 75 mm dia to suit existing delivery as per specification₹14,009.24
90Provision of GI bend 75 mm dia with flanges as per specification.₹2,018.94
91Provision of GI pipe 50 mm dia C class with coupling as per specification₹1,099.83
92Provision of GI bend 50 mm dia with flanges.₹1,190.58
93Provision PVC copper three core flate sheathed submersible cable ISI marrded size 2.5 sqmm as per specification.₹13,575
94Supply of Nylon rope heavy duty as per specification.₹2,462
95Provision of 3 core flat flexible copper cable submersible of size 6 sqmm as per specification.₹61,569
96Provision of 3 core flat flexible copper cable submersible of size 4 sqmm as per specification.₹20,758.50
97Removal of light, fan points including wiring and return of released material to stores₹1,158
98Hydraulic crane charges for dismantling and re-erection of High Mast at site.₹51,694.85
99Supply & fixing of danger board as per specification.₹15,091
100Supply & fabrication of SPS (Galvanized) as per specification.₹58,632
101Provision of Horizontal drilling for track crossing as per specification₹1,97,611
102Provision of Cement Concrete as per specification.₹61,617.92
103Supply, erection, testing and commissioning of 3 KVA UPS as per specification₹2,88,179.88
104Supply, fabrication, fixing, testing, commissioning and connecting of double sided LED based glow signage boards as per specification.₹3,31,102.80
105Provision of 15 Liter capacity storage type water heater/geyser along with including power point complete with copper conductor PVC insulated as per specification₹1,87,337
Total₹4,71,48,002.10

Bids quote a percentage above, below or at par with these rates · The total matches the advertised value.

Documents

6 files

Documents to submit

Commercial-Compliance

  • If Bid Security is in the form of Bank Guarantee should be in favor of Sr. Divisional Finance Manager, Central Railway, Solapur. In case, submission of Bid Security in the form of Bank Guarantee, a scanned copy of the Bank Guarantee shall be uploaded on e-Procurement Portal (IREPS) while applying to the tender. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids. Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid.

    Document optional
  • For exemption of Bid Security tenderer should submit following documents. If not submitted offer will be considered invalid.

    1. Any firm recognized by Department of Industrial Policy and Promotion (DIPP) as 'Startups' shall be exempted from payment of Bid Security.
    2. Labour Cooperative Societies shall submit only 50% of above Bid Security detailed above.
    Document optional
  • The bidder shall submit a duly filled-in and signed declaration, with date, regarding non-employment of retired Gazetted Officers of Indian Railways, as per Proforma-D of the Tender Document

    Document required
  • Affidavit for Sole Proprietor (Mandatory for Sole Proprietorship firms only)

    Document optional
  • The tenderers shall submit requisite information as per Annexure-I (First Sheet) Tender Form as per enclosed format.

    Document required

Please enter the percentage of local content in the material being offered.

Please enter 0 for fully imported items, and 100 for fully indigenous items.

The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

Technical-Compliances

  • The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be.

    Document required
Show all 9
  • The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected.

    Document optional
  • The tenderers shall submit a copy of certificate stating that all their statements/documents submitted along with bid are true and factual. Standard format of certificates to be submitted by the bidder is enclosed as Annexure-V. In addition to Annexure-V, in case of other than Company/Proprietary firm, Annexure-V(A) shall also be submitted by each member of a Partnership Firm / Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) et. as the case may be. Non submission of above certificate by the bidder shall result in summarily rejection of his/their bid.

    Document optional
  • Checklist for mandatory documents as per GCC April 2022 is included in tender form (Page no.1). Tenders without those documents will be summarily rejected.

    Document required

Eligibility

Standard Financial Criteria

  • The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB of GCC 2022, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.

    Document required

Special Technical Criteria

  • Tenderer shall possess the valid Electrical Contractor's License/Registration with CPWD department or any state.

    Document required

Standard Technical Criteria

    1. The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:
      1. Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or
      2. Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or
      3. One similar work costing not less than the amount equal to 60% of advertised value of the tender.
    2. In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:
      1. Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or
      2. Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or
      3. One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)
        1. In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b)
        2. To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
    Document required
  • Defination of Similar Work Electrification/ Rewiring of Service or Residential building/Yard/HT/LT substation work/HT/LT cable work/ Street lighting/ platform or building lighting management/ circulating area Lighting / Electrical overhead power supply work/ Electrical pump work etc.

Partnership firm/Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.

  • Please submit a certificate in the prescribed format (please download the format from the link given below). Non submission of the certificate, or submission of certificate either not properly filled in, or in a format other than the prescribed format shall lead to summary rejection of your offer. ( Click here to download the Format of Self Certification)

Check each criterion against the tender notice before you bid.

Commercial conditions

EMD
₹943,000
Tender fee
None

Terms & conditions

4 conditions

Commercial-Compliance

  • The successful bidder shall have to submit a Performance Guarantee (PG) within 21 (Twenty one) days from the date of issue of Letter of Acceptance (LOA). Extension of time for submission of PG beyond 21 (Twenty one) days and upto 60 days from the date of issue of LOA may be given by the Authority who is competent to sign the contract agreement. However, a penal interest of 12% per annum shall be charged for the delay beyond 21(Twenty one) days, i.e. from 22nd day after the date of issue of LOA. Further, if the 60th day happens to be a declared holiday in the concerned office of the Railway, submission of PG can be accepted on the next working day.

  • If a tender is accepted on the quoted rates of bidder which is below 5% the advertised tender value, an additional performance security 5% shall be submitted by the bidder after issue of LOA.

General Instructions

  • Tenderers are required to quote rates in the Financial Offer Tab provided for this purpose during submission of E-tender.

  • Tenderers are requested to visit the web site https//www.ireps.gov.in frequently till the closing date and time for any update.

Bidder declarations (20)

Undertakings

  • I have read the entire tender document including uploaded documents and quoted rates accordingly.

  • I/We have read all the CONDITION OF TENDER attached here with as Document (Conditionoftender.pdf)and will abide by the all conditions mentioned therein.

  • I/ We have visited the works site and I / We am / are aware of the site conditions.

  • Until a formal agreement is prepared and executed, acceptance of this tender shall constitute a binding contract between us subject to modifications, as may be mutually agreed to between us and indicated in the letter of acceptance of my/our offer for this work.

  • I/We shall be debarred from participating in re-tender of the above work, in case I/we fail to submit the PG as stipulated above.

  • The successful tenderer/tenderers shall be required to execute agreement with the President of India acting through the Sr.Divisional Electrical Engineer, Central Railway, Solapur for carrying out the work as per Standard General Conditions of contract as reffered in Instruction to tenderers, Special Conditions/Specification annex to the tender.

  • I/We also hereby agree to abide by the General Conditions of Contract corrected up to printed/ advance correction slip and to carry out the work according to the Special Tender Conditions of Contract relating to Site Data and Specifications.

  • I/We agree to keep this tender open for acceptance for a period of 60 Sixty days from the date fixed for opening the same, subject to the period being extended further if required, by mutual agreement from time to time.

  • Tenderer shall ensure that all the documents as mentioned in checklist (Page 1 of Tender Book) are enclosed with offer.

  • Full value of the earnest money shall stand forfeited without prejudice to any other right or remedies if (I)I/We do not execute the contract documents within seven days after receipt of notice issued by the Railway that such documents are ready (ii)I/We do not commence the work within fifteen days after receipt of orders to that effect.

Certifications

  • I/we the tenderer (s) am/are signing this document after carefully reading the contents.

  • I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.

  • I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.

  • I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.

  • I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.

  • I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.

  • I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.

  • I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.

  • I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.

  • I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)

Similar open tenders

Soonest first

Search similar in the explorerFind this tender in the explorer

Tender notice (PDF)