MTR, SC, 415VAC+ /-10% , 315M8, 750RPM, 55KW

Bidders are advised to check applicable GST on their own before quoting. Buyer will not take any responsibility in this regards. GST reimbursement will be as per actuals or as per applicable rates (whichever is lower), subject to the maximum of quoted GST %.

Data Sheet of the product(s) offered in the bid, are to be uploaded along with the bid documents. Buyers can match and verify the Data Sheet with the product specifications offered. In case of any unexplained mismatch of technical parameters, the bid is liable for rejection.

Manufacturer Authorization:Wherever Authorised Distributors/service providers are submitting the bid, Authorisation Form /Certificate with OEM/Original Service Provider details such as name, designation, address, e-mail Id and Phone No. required to be furnished along with the bid

Supplier shall ensure that the Invoice is raised in the name of Consignee with GSTIN of Consignee only.

• 1.The Seller shall not assign the Contract in whole or part without obtaining the prior written consent of buyer.
• 2.The Seller shall not sub-contract the Contract in whole or part to any entity without obtaining the prior written consent of buyer.
• 3.The Seller shall, notwithstanding the consent and assignment/sub-contract, remain jointly and severally liable and responsible to buyer together with the assignee/ sub-contractor, for and in respect of the due performance of the Contract and the Sellers obligations there under.

Without prejudice to Buyer’s right to price adjustment by way of discount or any other right or remedy available to Buyer, Buyer may terminate the Contract or any part thereof by a written notice to the Seller, if:

• i)The Seller fails to comply with any material term of the Contract. ii) The Seller informs Buyer of its inability to deliver the Material(s) or any part thereof within the stipulated Delivery Period or such inability otherwise becomes apparent. iii) The Seller fails to deliver the Material(s) or any part thereof within the stipulated Delivery Period and/or to replace/rectify any rejected or defective Material(s) promptly. iv) The Seller becomes bankrupt or goes into liquidation.
• v)The Seller makes a general assignment for the benefit of creditors. vi) A receiver is appointed for any substantial property owned by the Seller. vii) The Seller has misrepresented to Buyer, acting on which misrepresentation Buyer has placed the Purchase Order on the Seller.

While generating invoice in GeM portal, the seller must upload scanned copy of GST invoice and the screenshot of GST portal confirming payment of GST.

Scope of supply (Bid price to include all cost components) : Only supply of Goods

Nominated Inspection Agency: On behalf of the Buyer organization, any one of the following Inspection Agency would be conducting inspection of stores before acceptance: Pre-dispatch Inspection at Seller Premises (applicable only if pre-dispatch inspection clause has been selected in ATC): WAIVED Post Receipt Inspection at consignee site before acceptance of stores: AT BSL STORES AT B S CITY

Bidder's offer is liable to be rejected if they don't upload any of the certificates / documents sought in the Bid document, ATC and Corrigendum if any.

Buyer Added text based ATC clauses

• 1.The bids submitted by the Sellers to whom LTE has been issued, shall only be considered for evaluation; bids from any other Seller shall be treated as unsolicited in the instant procurement case. However, the fir m(s) interested to be registered as a Seller to SAIL, should fill up the vendor registration form, hosted on t he SAIL Tender website and complete the due process of registration with SAIL Plants/ Units.
• 2.In case of dealer or authorized distributors, Gem bid specific OEM Authorization certificate to be submitt ed. Special terms & conditions; Delivery Text : Proper packaging should be ensured to avoid any damage to the proposed motors during tr ansportation. Delivery within six months after PO Placement. Drawing for approval to be submitted within 15 days from PO placement. Material PO Text : Dimensions of the motors should be as follows
• 1.For Motor: A : 508 B/B1 : 406 / 457 E : 170 C : 216 H : 315 D : 80 (shaft dia) Pl. note all the measurements are in mm.
• 3.Unloading Responsibility: BSL
• 4.Shipping Address: DGM(Stores) Stores Department, Steel Gate, GateNo-9, Bokaro Steel Plant Bokaro Steel City, Jharkhand Pin-827001
• 5.Kindly confirm the following terms and conditions
• a)Terms of delivery – For BSL STORES.
• b)Payment Terms – 100% Against GRN
• c)Price Terms – Fixed
• d)Taxes – Please indicate clearly your “Taxes” as applicable in GST.
• e)Quantity – As per RFQ
• f)Kindly confirm your acceptance of technical specifications of our bid without any deviation. Mandatory instructions for delivery of goods by vendors to be incorporated in GeM PO:
• a.Copy of invoice duly pasted on the parcel with details like SAP PO number, Invoice no and Invoice date, material and it's quantity clearly legible on the document. Without this information, parcel shall not be acc epted.
• b.Arrangement for delivery of goods to be made by the vendor as per route card given to vendor at the ti me of gate entry.
• 6.By participating in this tender, the Suppliers/ Vendors/ Contractors are deemed to have undertaken that they shall not give or take, any financial or non-financial bribe, to or from anyone during execution of the c ontract thereafter and if they notice any such incident happening, they shall report it to SAIL Vigilance.
• 7.The supplier must replace, free of charge, any stores & spares which owing to defect in design, material or workmanship fail or show signs of failure at any time within 12 months from date of putting them in use /operation or 18 months from date of delivery, whichever is earlier.
• 8.inspection Plan No: 1 STAGE INSPECTION:: waived PREDISPATCH INSPECTION (INDIGENOUS): waived PREDISPATCH INSPECTION (IMPORT): waived FINAL RECEIPT INSPECTION: RECEIPT INSPECTION
• 1.VISUAL INSPECTION
• 2.VERIFIACTION OF DOCS QAP & DOCUMENTS TO BE SUBMITTED: Documents to be submitted: 1.GC INSPECTION TEXT:
• 1.BSL RESERVES THE RIGHT TO CONDUCT INSPECTION AT ANY STAGE PRIORTO DESPATCH OR AFTER RECEIPT INCLUDING TESTING OF MATERIALS IRRESPECTIVE OF INSPECTION CLAUSE GIVEN IN THE PO.
• 2.ALL TEST REPORTS / DOCUMENTS MENTIONED IN PO HAVE TO BE SUBMITTED IN ADDITION TO THE DOCUMENTS MENTIONED IN INSPECTION PLAN ALONG WITH THE MATERIAL OR WHENEVER ASKED FOR.
• 3.CLEAR, VISIBLE IDENTIFICATION MARK (IM) OF THE SUPPLIER / MANUFACTURER HAS TO BE GIVEN ON THE MATERIAL AND IT HAS TO BE ENCIRCLED, FAILING WHICH THE MATERIAL MAY BE REJECTED. THE DETAILS OF THE "IM" <(>&<)> ITS LOCATION ON THE MATERIAL HAS TO BE CLEARLY MENTIONED IN THE INVOICE / CHALLAN / PACKING LIST. .

Buyer uploaded ATC document Click here to view the file.