GeMOpenGoodsBid
PLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES Conforming To IS 9763, Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931, (Eमशः (ेणी 1 और (ेणी 2 के 'थान…
Indian Army
Ministry of Defence › Department of Military Affairs
Delivers to
Firozpur, Punjab
Overview
10 facts from the tenderMinistry of Defence published this goods tender on GeM on 14 Oct 2026, for Firozpur, Punjab. The estimated value is ₹14 L and the EMD is ₹42,000. It closes on 24 Oct 2026, 6:00 pm IST. Bid number GEM/2026/B/8130403.
Timeline
- Published14 Oct 2026 · 5:53 pm
- Closesin 8d 21h24 Oct 2026 · 6:00 pm
Bidding
- Bid type
- Bid
- Evaluation method
- Total value wise evaluation
- Packet type
- Two Packet Bid
- Reverse auction
- No
- Total quantity
- 1,601
Buyer
- Created by
- SBSOCWEFZR
- Location
- Firozpur · Punjab
- Portal
- GeM
Important dates
- Published
- 14 Oct 2026, 5:53 pm IST
- Closes
- 24 Oct 2026, 6:00 pm IST
Items & delivery
42 items · Address masked by GeM
Delivery location · all items
***********Firozpur
GeM masks the full address in this document.01PLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES Conforming To IS 9763Quantity104 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Conformity to IS 9763
- Yes
- Product Type
- Plastic Bib Tap
- Nominal Size (in mm)
- 15 mm (1/2")
- Hot/Cold Identification of Control Devices
- Blue Color or Letter C for Cold Water
- Material of Body of Tap/Valve
- PP Copolymer (conforming to IS 10910)
- Material of Bonnet of Tap/Valve
- PP Copolymer (conforming to IS 10910)
- Material of Spindle of Tap/Valve
- Nylon 66 (conforming to 13464)
- Material of Handle of Tap/Valve
- PBT (conforming to IS 13193)
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Material of Seal of Tap/Valve
- Rubber
- Dimensions (in mm)
- Bib Taps (As per Table 3 of IS 9763)
02PLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES Conforming To IS 9763Quantity51 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Conformity to IS 9763
- Yes
- Product Type
- Stop Valve
- Nominal Size (in mm)
- 15 mm (1/2")
- Hot/Cold Identification of Control Devices
- Blue Color or Letter C for Cold Water
- Material of Body of Tap/Valve
- PP Copolymer (conforming to IS 10910)
- Material of Bonnet of Tap/Valve
- PP Copolymer (conforming to IS 10910)
- Material of Spindle of Tap/Valve
- PP Copolymer (conforming to IS 10910)
- Material of Handle of Tap/Valve
- PP Copolymer (conforming to IS 10910)
- Material of Seal of Tap/Valve
- Rubber
- Dimensions (in mm)
- Stop Valves (As per Table 5 of IS 9763)
03Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity43 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Type 2 Bib tap
- Dimension
- As per table 4 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Material of body, body components, nozzle , bonnet and back nuts
- Brass rods
- Material of inlet tubes
- Brass tubes
- Material of flanges
- Die cast brass
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Forged brass
- Material of circlip, wire locks
- Stainless steel
- Material of 'O' ring , gasket, and seat washer
- Synthetic rubber
- Material of Knob and knob components
- Cast brass
- Aerating device fitted with tap
- No
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Flow straightening device fitted with tap
- No
- Warranty (in months)
- 12
04Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity32 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Stop valve with internal thread
- Dimension
- As per table 5 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Material of body, body components, nozzle , bonnet and back nuts
- Cast brass
- Material of inlet tubes
- Brass tubes
- Material of flanges
- Cast brass
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Extruded brass rods
- Material of circlip, wire locks
- Phosphor bronze sheet
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Material of 'O' ring , gasket, and seat washer
- Synthetic rubber
- Material of Knob and knob components
- Cast brass
- Aerating device fitted with tap
- No
- Flow straightening device fitted with tap
- No
- Warranty (in months)
- 6
05Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity25 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Type 3 Bib tap
- Dimension
- As per table 4 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Material of body, body components, nozzle , bonnet and back nuts
- Brass rods
- Material of inlet tubes
- Brass tubes
- Material of flanges
- Brass rods
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Extruded brass rods
- Material of circlip, wire locks
- Phosphor bronze wire
- Material of 'O' ring , gasket, and seat washer
- Synthetic rubber
- Material of Knob and knob components
- Zinc base alloys
- Aerating device fitted with tap
- Yes
- Flow straightening device fitted with tap
- Yes
- Warranty (in months)
- 6
06Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity40 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Pillar tap
- Dimension
- As per table 3 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Material of body, body components, nozzle , bonnet and back nuts
- Forged brass
- Material of inlet tubes
- Brass tubes
- Material of flanges
- Brass sheet
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Rolled brass rods
- Material of circlip, wire locks
- Phosphor bronze wire
- Material of 'O' ring , gasket, and seat washer
- Neoprene rubber
- Material of Knob and knob components
- Brass rods
- Aerating device fitted with tap
- Yes
- Flow straightening device fitted with tap
- Yes
- Warranty (in months)
- 12
07Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity27 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Item
- One hole pillar mounted combination tap assembly
- Dimension
- As per table 7 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Material of body, body components, nozzle , bonnet and back nuts
- Die cast brass
- Material of inlet tubes
- Brass tubes
- Material of flanges
- Brass rods
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Extruded brass rods
- Material of circlip, wire locks
- Phosphor bronze sheet
- Material of 'O' ring , gasket, and seat washer
- Neoprene rubber
- Material of Knob and knob components
- Forged brass
- Aerating device fitted with tap
- Yes
- Flow straightening device fitted with tap
- Yes
- Warranty (in months)
- 12
08Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity13 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Type 2 wall mounted combination tap assembly
- Dimension
- As per table 6 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Material of body, body components, nozzle , bonnet and back nuts
- Die cast brass
- Material of inlet tubes
- Brass tubes
- Material of flanges
- Forged brass
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Forged brass
- Material of circlip, wire locks
- Phosphor bronze sheet
- Material of 'O' ring , gasket, and seat washer
- Neoprene rubber
- Material of Knob and knob components
- Die cast brass
- Aerating device fitted with tap
- Yes
- Flow straightening device fitted with tap
- Yes
- Warranty (in months)
- 12
09(Eमशः (ेणी 1 और (ेणी 2 के 'थानीय आपूित%कता% के jप मJ अह%ता :ाk करने के िलए आवPयक/Minimum 50% and 20% LocalQuantity9Delivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Type 1 wall mounted combination tap assembly
- Dimension
- As per table 6 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Material of body, body components, nozzle , bonnet and back nuts
- Brass rods
- Material of inlet tubes
- Brass tubes
- Material of flanges
- Forged brass
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Rolled brass rods
- Material of circlip, wire locks
- Phosphor bronze wire
- Material of 'O' ring , gasket, and seat washer
- Synthetic rubber
- Material of Knob and knob components
- Forged brass
- Aerating device fitted with tap
- Yes
- Flow straightening device fitted with tap
- Yes
- Warranty (in months)
- 12
10Waste Fittings For Washbasin And Sinks As Per IS 2963Quantity41 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Material of Waste Fitting
- Leaded Tin Bronze conforming to Grade 2 of IS 318/1962
- Nominal Size
- 32 mm for washbasin
- WARANTEE PERIOD IN NUMBER OF YEARS
- 3
11Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity8 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Type 2 Bib tap
- Dimension
- As per table 4 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Material of body, body components, nozzle , bonnet and back nuts
- Cast brass
- Material of inlet tubes
- Brass tubes
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Material of flanges
- Stainless steel sheet
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Extruded brass rods
- Material of circlip, wire locks
- Phosphor bronze sheet
- Material of 'O' ring , gasket, and seat washer
- Synthetic rubber
- Material of Knob and knob components
- Cast brass
- Aerating device fitted with tap
- Yes
- Flow straightening device fitted with tap
- No
- Warranty (in months)
- 12
12Bathroom Water Shower (V2)Quantity70 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Type of shower
- Hand Shower
- Material of body/face plate
- Brass
- Finish of face plate
- Chrome plated
- Type of Water Flow
- Only Rainfall
- Specification
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement
- Name
- (Allowed Values)
- Type of Multiple flow
- NA
- Shape of Shower
- Round
- Size of Shower
- 300mm
- Overall length of Hand Shower (in mm)
- 200
- Length of Hand Shower Tube (in mt)
- 1.5
- Diameter of Hand Shower Tube (in mm)
- 8
- Material of Hand Shower Tube
- Stainless Steel
- Overall length of Shower Arm (in mm)
- NA
- Warranty (in Years)
- 1
13Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity29 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Angle stop valve
- Dimension
- As per table 5 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Material of body, body
- Forged brass
- Material of inlet tubes
- Copper tubes
- Material of flanges
- Brass rods
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Rolled brass rods
- Material of circlip, wire locks
- Stainless steel
- Material of 'O' ring , gasket, and seat washer
- Synthetic rubber
- Material of Knob and knob components
- Brass rods
- Aerating device fitted with tap
- Yes
- Flow straightening device fitted with tap
- Yes
- Warranty (in months)
- 6
14Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity5 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Item
- Single lever wall mounted sink mixture with swivel spout
- Dimension
- As per table 13 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Material of body, body components, nozzle , bonnet and back nuts
- Die cast brass
- Material of inlet tubes
- Brass tubes
- Material of flanges
- Die cast brass
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Rolled brass rods
- Material of circlip, wire locks
- Phosphor bronze wire
- Material of 'O' ring , gasket, and seat washer
- Neoprene rubber
- Material of Knob and knob components
- Die cast brass
- Aerating device fitted with tap
- Yes
- Flow straightening device fitted with tap
- Yes
- Warranty (in months)
- 12
15Bathroom Water Shower (V2)Quantity55 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Type of shower
- Overhead shower (Wall mount with shower arm)
- Material of body/face plate
- Brass
- Finish of face plate
- Chrome plated
- Type of Water Flow
- Rainfall and Multiple flow
- Type of Multiple flow
- Rainflow
- Shape of Shower
- Round
- Size of Shower
- 200mm
- Overall length of Hand Shower (in mm)
- NA
- Length of Hand Shower Tube (in mt)
- NA
- Diameter of Hand Shower Tube (in mm)
- NA
- Material of Hand Shower Tube
- NA
- Overall length of Shower Arm (in mm)
- 120
- Warranty (in Years)
- 1
16Ceramic ( Vitreous China ) Flushing Cisterns For Water Closets And Urinals Conforming To IS 774Quantity61 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Conformity to IS 774
- Yes
- Flushing Device
- Cistern
- Material for Flush Pipe
- Polypropylene Pipe
- Material for Overflow Pipe
- Polyethylene Pipe (Conformity to Is 4984)
- Cistern Discharge Capacity
- Full Flush (6 ± 0.5 liters) Reduced Flush (3 ± 0.5 liters)
17Stainless Steel Shelf RackQuantity8 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Configuration
- With 3-Shelf (including top shelf)
- Shape of support structure
- Angle post
- Ground clearance (mm)
- 25 mm
- Mode of supply
- Assembled Ready To Use
- Shelf material
- Stainless Steel Grade 304 galvanized
- Shelf material thickness
- 0.6 mm
- Support structure material
- Stainless Steel Grade 304 galvanized
- Support structure material thickness
- 0.6 mm
- Width of shelf rack ± 10 mm
- 915 mm
- Depth of shelf rack ± 10 mm
- 405 mm
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Height of shelf rack ± 10 mm
- 1220 mm
- Height of support structure ± 10 mm
- 1245 mm
- Size of support structure
- 30 mm x 35 mm
- Warranty period
- 1 - Year
- Test report to be furnished to buyer on demand
- Yes
18Towel RailQuantity8 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Rail Material
- Stainless Steel (SS 304)
- Mounting Bracket Material
- Stainless Steel (SS 304)
- Towel Rail Length (in mm) (Tolerance : ± 10 mm)
- 600 mm
- Rail Diameter/Thickness (in mm) (Tolerance : ± 10 mm)
- 19 mm
- Projection from Wall (in mm) (Tolerance : ± 10 mm)
- 60 mm
- Towel Rail Type
- Folding Rail
- Bar Shape of Rail
- Round
- Recommended Load Capacity (in kg)
- Up to 3 kg
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Fixing Hardware Included
- Yes
- Fasteners Material
- Stainless Steel
19Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity278 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Type 2 Bib tap
- Dimension
- As per table 4 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Material of body, body components, nozzle , bonnet and back nuts
- Forged brass
- Material of inlet tubes
- Copper tubes
- Material of flanges
- Brass rods
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Extruded brass rods
- Material of circlip, wire locks
- Stainless steel
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Material of 'O' ring , gasket, and seat washer
- Synthetic rubber
- Material of Knob and knob components
- Forged brass
- Aerating device fitted with tap
- No
- Flow straightening device fitted with tap
- Yes
- Warranty (in months)
- 12
20Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity9 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Concealed stop valve
- Dimension
- As per table 5 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Material of body, body components, nozzle , bonnet and back nuts
- Cast brass
- Material of inlet tubes
- Brass tubes
- Material of flanges
- Cast brass
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Extruded brass rods
- Material of circlip, wire locks
- Phosphor bronze wire
- Material of 'O' ring , gasket, and seat washer
- Synthetic rubber
- Material of Knob and knob components
- Cast brass
- Aerating device fitted with tap
- Yes
- Flow straightening device fitted with tap
- Yes
- Warranty (in months)
- 6
21Flexible Drain Hoses For Wash Basins/ SinksQuantity91 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Installation Type
- Threaded
- Hose Material
- PVC
- Reinforcement Type
- Fabric Reinforced
- Flexibility Type
- Smooth Bore
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Nominal Bore of Hose (in mm)
- 32 mm
- Hose Length in meter (Tolerance : ± 10 mm)
- 1 meter
- Wall Thickness (in mm)
- 1 mm
- Durability Grade
- Heavy Duty
- Connection Fitting Included
- Yes
- Type of Connection Fitting
- Threaded Adapter
- Fitting Material
- PVC
- Washer/Gasket Material
- Silicone
22Flexible Drain Hoses For Wash Basins/ SinksQuantity25 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Installation Type
- Threaded
- Hose Material
- PVC
- Reinforcement Type
- Fabric Reinforced
- Flexibility Type
- Smooth Bore
- Nominal Bore of Hose (in mm)
- 50 mm
- Hose Length in meter (Tolerance : ± 10 mm)
- 1 meter
- Wall Thickness (in mm)
- 1 mm
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Durability Grade
- Heavy Duty
- Connection Fitting Included
- Yes
- Type of Connection Fitting
- Threaded Adapter
- Fitting Material
- PVC
- Washer/Gasket Material
- Silicone
23Bathroom Water Shower (V2)Quantity23 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Type of shower
- Shower Panel
- Material of body/face plate
- Stainless Steel
- Finish of face plate
- Chrome plated
- Type of Water Flow
- Only Rainfall
- Type of Multiple flow
- NA
- Shape of Shower
- Oval
- Size of Shower
- 65x 95 mm
- Overall length of Hand Shower (in mm)
- NA
- Length of Hand Shower Tube (in mt)
- NA
- Diameter of Hand Shower Tube (in mm)
- NA
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Material of Hand Shower Tube
- NA
- Overall length of Shower Arm (in mm)
- NA
- Warranty (in Years)
- 1
24Connector Pipes For Washbasins/ Sinks/ GeyserQuantity61 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Inner Pipe Material
- Silicone Rubber, PVC
- Cover Material
- Nylon Braided
- Nominal Bore Size (in mm)
- 12 mm
- End Connection Size (in inch)
- ½ inch,, ¾ inch, ? inch
- Pipe Length (Tolerance: ±10 mm)
- 450 mm
- End Connection Type (Material to be supplied alonwith)
- Nut–Nut
- End Fitting Material
- Stainless Steel
- Surface Finish
- Nickel Plated
- Washer/Gasket Included
- Yes
- Maximum Working Pressure (in bar)
- Up to 10 bar
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Operating Temperature Range (in °C)
- Up to 40°C
- Durability Grade
- Medium Duty
25Connector Pipes For Washbasins/ Sinks/ GeyserQuantity55 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Inner Pipe Material
- Silicone Rubber, PVC
- Cover Material
- PVC Outer Cover
- Nominal Bore Size (in mm)
- 10 mm
- End Connection Size (in inch)
- ½ inch,, ¾ inch, ? inch
- Pipe Length (Tolerance: ±10 mm)
- 600 mm
- End Connection Type (Material to be supplied alonwith)
- Nut–Nut
- End Fitting Material
- PTMT (Polytetra Methylene Terephthalate)
- Surface Finish
- None
- Washer/Gasket Included
- Yes
- Maximum Working Pressure (in bar)
- 10–20 bar
- Operating Temperature Range (in °C)
- Up to 40°C
- Durability Grade
- Medium Duty
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
26Waste Fittings For Washbasin And Sinks As Per IS 2963Quantity69 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Material of Waste Fitting
- Leaded Tin Bronze conforming to Grade 2 of IS 318/1962
- Nominal Size
- 32 mm for washbasin
- WARANTEE PERIOD IN NUMBER OF YEARS
- 1
27Waste Fittings For Washbasin And Sinks As Per IS 2963Quantity13 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Material of Waste Fitting
- Leaded Tin Bronze conforming to Grade 2 of IS 318/1962
- Nominal Size
- 50 mm for sink
- WARANTEE PERIOD IN NUMBER OF YEARS
- 2
28Floor Drain Traps (V2)Quantity48 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Material
- Stainless Steel
- Trap Seal Depth (in mm)
- 40 mm
- Removable Grating
- No
- Anti-Insect Feature
- Yes
- Anti-Odor Feature
- Yes
- Corrosion Resistance
- Yes
- Overall Size (Length x Breadth x Height) in mm
- 125 mm x 125 mm x 100 mm
- Flow Rate Capacity
- Heavy Duty
29Floor Drain Traps (V2)Quantity36 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Material
- Stainless Steel
- Trap Seal Depth (in mm)
- 40 mm
- Removable Grating
- No
- Anti-Insect Feature
- Yes
- Anti-Odor Feature
- Yes
- Corrosion Resistance
- Yes
- Overall Size (Length x Breadth x Height) in mm
- 125 mm x 125 mm x 100 mm
- Flow Rate Capacity
- Heavy Duty
30Bathroom Or Toilet Mirror (V3)Quantity22 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Type of Mirror
- Plain Mirror
- Mirror Shape
- Rectangular
- Type of Mirror Coating
- Silver Coated
- Frame
- With
- Frame Material
- Aluminium
- Frame Color
- Silver
- Mirror Mounting/Fixing System
- Clamp Support
- Width/Diameter of Mirror (inch)
- >15 to ?20
- Height/Diameter of Mirror (inch)
- >20 to ?25
- Thickness of Mirror (mm)
- >4 to ?4.5
31Bathroom Or Toilet Mirror (V3)Quantity10 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Type of Mirror
- Decorative Mirror
- Mirror Shape
- Rectangular
- Type of Mirror Coating
- Silver Coated
- Frame
- With
- Frame Material
- Plastic
- Frame Color
- White
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Mirror Mounting/Fixing
- Wall Hanging System (Hook/Hanger)
- Width/Diameter of Mirror (inch)
- >15 to ?20
- Height/Diameter of Mirror (inch)
- >20 to ?25
- Thickness of Mirror (mm)
- >3.5 to ?4
32Bathroom Water Shower (V2)Quantity8 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Type of shower
- Overhead shower (Ceiling mount with shower arm)
- Material of body/face plate
- Brass
- Finish of face plate
- Chrome plated
- Type of Water Flow
- Only Rainfall
- Type of Multiple flow
- NA
- Shape of Shower
- Square
- Size of Shower
- 100 mm
- Overall length of Hand Shower (in mm)
- NA
- Length of Hand Shower Tube (in mt)
- NA
- Diameter of Hand Shower Tube (in mm)
- NA
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Material of Hand Shower Tube
- NA
- Overall length of Shower Arm (in mm)
- 150
- Warranty (in Years)
- 1
33Floor Drain Traps (V2)Quantity48 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Material
- Stainless Steel
- Trap Seal Depth (in mm)
- 25 mm
- Removable Grating
- No
- Anti-Insect Feature
- Yes
- Anti-Odor Feature
- Yes
- Corrosion Resistance
- Yes
- Overall Size (Length x Breadth x Height) in mm
- 100 mm x 100 mm x 100 mm
- Flow Rate Capacity
- Medium Duty
34Ceramic ( Vitreous China ) Flushing Cisterns For Water Closets And Urinals Conforming To IS 774Quantity24 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Conformity to IS 774
- Yes
- Flushing Device
- Cistern
- Material for Flush Pipe
- Polyethylene Pipe (Conformity to Is 4984)
- Material for Overflow Pipe
- Polyethylene Pipe (Conformity to Is 4984)
- Cistern Discharge Capacity
- Full Flush (6 ± 0.5 liters) Reduced Flush (3 ± 0.5 liters)
35Plastic Seats And Covers For Water - Closets As Per IS 2548Quantity25 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Materials of Seat and Covers
- Polystyrene
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Materials of Hinging Device
- Bronze or Brass with Nickle Chromium Plating
- Seat
- Grade 1
- Cover
- Grade 1
36Towel RailQuantity17 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Rail Material
- Brass
- Mounting Bracket Material
- Brass
- Towel Rail Length (in mm) (Tolerance : ± 10 mm)
- 450 mm
- Rail Diameter/Thickness (in mm) (Tolerance : ± 10 mm)
- 19 mm
- Projection from Wall (in mm) (Tolerance : ± 10 mm)
- 60 mm
- Towel Rail Type
- Single Bar
- Bar Shape of Rail
- Flat
- Recommended Load Capacity (in kg)
- 3–6 kg
- Fixing Hardware Included
- No
- Fasteners Material
- Stainless Steel
37Towel RingQuantity20 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Ring Shape
- Circular
- Ring Material
- Stainless Steel (SS 202)
- Mounting Bracket Material
- Stainless Steel (SS 202)
- Inner Diameter of Ring (in mm) (Tolerance : ± 10 mm)
- 140 mm
- Ring Rod Thickness (in mm) (Tolerance : ± 10 mm)
- 8 mm
- Projection from Wall (in mm) (Tolerance : ± 10 mm)
- 50 mm
- Mounting Plate Size (in mm)
- 40 mm
- Ring Movement Type
- Fixed Ring
- Recommended Load Capacity (in kg)
- 2–5 kg
- Fixing Hardware Included
- Yes
- Fasteners Material
- Stainless Steel
38Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming To IS 778Quantity24 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Conformity to IS 778
- Yes
- End Connection
- Screwed Ends
- Nominal Size of Valves (in mm)
- 15 mm
- Pressure Classification
- Class 2 Valve : Suitable for cold working pressure up to 1.6 MPa
- Gate Valve Type
- Solid Wedge Type
- Bonnet Type/Design
- Screwed - in bonnet integral seats
- Material of Body
- Brass (conforming to DCB 2 of IS 1264)
- Material of Bonnet/Cover Material
- Brass (conforming to DCB 2 of IS 1264)
- Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable
- Brass (conforming to DCB 2 of IS 1264)
- Material of Stem, hinge pin and plug
- Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
- Material of Gland Packing
- Asbestos (conforming to 4687)
- Minimum Length of Threaded Portion at the end (in mm)
- 9.5 mm
- Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)
- 3.7 mm
- Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)
- 11.5 mm
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)
- 8 mm
- Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)
- 26 mm
- End to End Dimensions of Screwed End Valves (in mm)
- As per Table 9 of IS 778
- Face to Face Dimensions of Flanged Valves (in mm)
- As per Table 11 of IS 778
39Towel RailQuantity19 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Rail Material
- Stainless Steel (SS 304)
- Mounting Bracket Material
- Stainless Steel (SS 304)
- Towel Rail Length (in mm) (Tolerance : ± 10 mm)
- 600 mm
- Rail Diameter/Thickness (in mm) (Tolerance : ± 10 mm)
- 19 mm
- Projection from Wall (in mm) (Tolerance : ± 10 mm)
- 60 mm
- Towel Rail Type
- Single Bar
- Bar Shape of Rail
- Round
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Recommended Load Capacity (in kg)
- Up to 3 kg
- Fixing Hardware Included
- Yes
- Fasteners Material
- Plastic
40Ceramic ( Vitreous China ) Flushing Cisterns For Water Closets And Urinals Conforming To IS 774Quantity20 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Conformity to IS 774
- Yes
- Flushing Device
- Dual - Fresh Cistern
- Material for Flush Pipe
- Polyethylene Pipe (Conformity to Is 4984)
- Material for Overflow Pipe
- Polyethylene Pipe (Conformity to Is 4984)
- Cistern Discharge Capacity
- Full Flush (4.8 ± 0.5 liters) Reduced Flush (2.8 ± 0.5 liters)
41Stainless Steel Sinks For Domestic Purposes (V3) As Per IS 13983Quantity11 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Bis Required
- Yes
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Confirmity to standard IS 13983 and ISI Marked
- Yes
- Type of Bowl
- Rectangular
- Type of Sink built in counter shall be as per clause 4 Of IS 13983
- Single bowl without drainer
- Material used stainless steel of Grade Designation used as per clause 5 of IS 13983
- SS 304 Or higher
- Sinks shall be provided, in one of the following conditions as per clause 7.5 of IS 13983
- Without tap holes
- Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove confirmity to specification
- No
- Test Report to be furnished to the buyer on demand
- No
42Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity16 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवPयक अनुमत मूXय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Type 3 Bib tap
- Dimension
- As per table 4 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Material of body, body components, nozzle , bonnet and back nuts
- Forged brass
- Material of inlet tubes
- Brass tubes
- Material of flanges
- Brass rods
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Forged brass
- Material of circlip, wire locks
- Phosphor bronze sheet
- Material of 'O' ring , gasket, and seat washer
- Neoprene rubber
- Material of Knob and knob components
- Brass rods
- Aerating device fitted with tap
- Yes
- Flow straightening device fitted with tap
- Yes
- Warranty (in months)
- 12
No matching items. Try another name, code or schedule.
Tender documents
Bid files and supporting documents, linked directly from GeM.
- Bid documentOpen
Full bid details and conditions
- GeM category specificationOpen
Applies to item 1
- GeM category specificationOpen
Applies to item 2
- GeM category specificationOpen
Applies to item 3
- GeM category specificationOpen
Applies to item 4
- GeM category specificationOpen
Applies to item 5
- GeM category specificationOpen
Applies to item 6
- GeM category specificationOpen
Applies to item 7
- GeM category specificationOpen
Applies to item 8
- GeM category specificationOpen
Applies to item 9
- GeM category specificationOpen
Applies to item 10
- GeM category specificationOpen
Applies to item 11
- GeM category specificationOpen
Applies to item 12
- GeM category specificationOpen
Applies to item 13
- GeM category specificationOpen
Applies to item 14
- GeM category specificationOpen
Applies to item 15
- GeM category specificationOpen
Applies to item 16
- GeM category specificationOpen
Applies to item 17
- GeM category specificationOpen
Applies to item 18
- GeM category specificationOpen
Applies to item 19
- GeM category specificationOpen
Applies to item 20
- GeM category specificationOpen
Applies to item 21
- GeM category specificationOpen
Applies to item 22
- GeM category specificationOpen
Applies to item 23
- GeM category specificationOpen
Applies to item 24
- GeM category specificationOpen
Applies to item 25
- GeM category specificationOpen
Applies to item 26
- GeM category specificationOpen
Applies to item 27
- GeM category specificationOpen
Applies to item 28
- GeM category specificationOpen
Applies to item 29
- GeM category specificationOpen
Applies to item 30
- GeM category specificationOpen
Applies to item 31
- GeM category specificationOpen
Applies to item 32
- GeM category specificationOpen
Applies to item 33
- GeM category specificationOpen
Applies to item 34
- GeM category specificationOpen
Applies to item 35
- GeM category specificationOpen
Applies to item 36
- GeM category specificationOpen
Applies to item 37
- GeM category specificationOpen
Applies to item 38
- GeM category specificationOpen
Applies to item 39
- GeM category specificationOpen
Applies to item 40
- GeM category specificationOpen
Applies to item 41
- GeM category specificationOpen
Applies to item 42
Policy & contract references
Documents you must submit
- Experience Criteria
- Past Performance
- Bidder Turnover
- Certificate (Requested in ATC)
- OEM Authorization Certificate
- Additional Doc 1 (Requested in ATC)
Show all 7
- Compliance of BoQ specification and supporting document
Eligibility
Experience
3 years
Min. turnover
₹7 L
a year, 3-year average
Past performance
10%
of the bid quantity
Experience & turnover exemptions
Startups
No exemptionExemption conditions
Exemptions depend on the evidence and conditions specified in the bid.
Preferences & relaxations
- MSE purchase preference
- MII preference
- Class-1/2 local suppliers
- EMD exemption: no
- Inspection required: no
Check each criterion against the tender notice before you bid.
Commercial conditions
- EMD
- ₹42,000
- Performance guarantee
- 3% for 2 months
- Offer validity
- 45 days
Buyer requirements & conditions
Buyer-added conditions from the bid document.
OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up to 25 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to increase the ordered quantity up to 25% of the contracted quantity during the currency of the contract at the contracted rates. The delivery period of quantity shall commence from the last date of original delivery order and in cases where option clause is exercised during the extended delivery period the additional time shall commence from the last date of extended delivery period. The additional delivery time shall be (Increased quantity ÷ Original quantity) × Original delivery period (in days), subject to minimum of 30 days. If the original delivery period is less than 30 days, the additional time equals the original delivery period. The Purchaser may extend this calculated delivery duration up to the original delivery period while exercising the option clause. Bidders must comply with these terms.
Buyer Added text based ATC clauses
- 1.UPLOAD DECLARATION / CERTIFICATE / UNDERTAKINGS ON IP ADDRESS, CARTEL BIDDING, S ISTER CONCERN FIRMS, M.I.I. UNDERTAKING, BIDDER FINANCIAL STANDING:- “(1) We accept all the terms & conditions of the bid.
- (2)We are not involved in any cartel bidding with other bidders if any participated.
- (3)We confirm that any of our sister concern firms have not participated in the bid.
- (4)We confirm that our firm will supply only the products having local content adhering to existing M.I.I. policies of Govt of India.
- (5)We are not under liquidation, court receivership or similar proceedings and not bankrupt.”
- 2.BIDDER SHALL UPLOAD THE FOLLOWING DOCUMENTS ALONGWITH THEIR BID FOR VENDOR CODE CREATION WHICH OTHERWISE RESULT DELAY IN PAYMENTS:-
- (a). Copy of PAN Card.
- (b). Copy of GSTIN.
- (c). Copy of Cancelled Cheque.
- (d). Copy of EFT mandate Duly Certified By Bank.
- 3.UPLOAD M.I.I. CERTIFICATE FROM OEMs OF MAKES QUOTED OUT OF THE MAKES MENTIONED, DUL Y SHOWED OF CLASS & PERCENTAGE OF LOCAL CONTENT IN THE LIGHT OF GOVERNMENT PUBLIC PROCUR EMENT (REFERENCE TO MAKE IN INDIA), ORDER DATED 2017, CONSEQUENT ORDER NO. P-45021/2/2017-P P (BE-II) DATED 04.06.2020 & 16.09.2020 AND SUBSEQUENT CLARIFICATION NO P-45021/102/2019-BE-II-P ART (1) (E-50310) DATED 04.03.2021 INCLUDING OM NO. F.1/4/2021-PPD DATED 18 MAY 2023.
- 4.THE MATERIALS SUPPLIED SHALL BE INSPECTED BY A BOARD OF OFFICERS BY THE DEPARTMENT AT CONSIGNEE END WITH RESPECT OF THE SPECIFICATIONS AND IS CODES. WHEREVER MENTIONED AS “I SI MARKED”, THE STORES SHALL BE SUPPLIED ACCORDINGLY. THE GENERAL ENGINEERING PRACTICE SH ALL BE APPLIED FOR ITEMS HAVING SHORT FALL OF SPECIFICATIONS. THE MATERIAL WILL BE REJECTED I N FULL IF SPECIFICATIONS ARE NOT CONFIRMING OR NOT AS PER CODES OR BID SPECIFICATIONS.
- 5.WARRANTY CERTIFICATES FOR SPECIFIED PERIODS AS PER THE BID ITEMS ON BIDDER LETTER HEA D, VALID TEST CERTIFICATES FROM GOVT LABS OR ANY GOVT ACCREDITED LABS AT THE DISCRETION OF OEM OR IN-HOUSE LABS ETC AS PER GEM NORMS, BIS LICENCE FOR THE QUOTED ITEMS, OUT OF MAKES MENTIONED IN ATC, TO BE SUBMITTED TO THE CONSIGNEE AS DEMANDED ALONGWITH THE MATERIALS A S APPLICABLE WHENEVER “ISI MARKED” IS SPECIFIED SO AS TO REVERT TO OEM IN CASE OF NON-COMPLI ANCE BY BIDDER OR OTHERWISE WITH DISCREPANCY ON Gem PORTAL FOR NON-SELECTABLE PARAMETE RS, IF FOUND AT PER COMMONLY WITH ALL BIDDER PARTICIPANTS, WILL BE IGNORED WHILE ASCERTAINI NG FOR QUALIFICATION CRITERION. IN SUCH CASES, IF ANY BIDDER CLAIMS / REPRESENTS, OEMS OF QUO TED PRODUCTS WILL BE APPROACHED FOR CLARIFICATION & ASSUANCE FROM OEMs FOR ENSURING PROPER PRODUCTS AS PER SPECIFICATIONS.
- 6.UPLOAD PAST PERFORMANCE AND EXPERIENCE DOCUMENTS IN THE FORM OF ANY GOVT PURCHA SE ORDERS AND RESPECTIVE GeM CRACS OR GOVT COMPLETION REPORTS OR GOVT WORK COMPLETION CERTIFICATES FOR THE PRIMARY CATEGORY GOODS AS MENTIONED IN THE BID AND ALSO IN THE SIMILAR MATERIAL CUM TECHNICAL FUNCTIONAL GOODS OF REPETITIVE CATEGORY NATURE UNDER ALL QUADRAN TS ON GeM PORTAL.
- 7.UPLOAD C.A. AUDITED ANNUAL TURNOVER OF BIDDER FOR 03 LATEST CONSECUTIVE FINANCIAL YEARS.
- 8.UPLOAD OEM AUTHORIZATION ON OEM LETTER HEAD FOR PARTICIPATION OF INSTANT BID DULY QUOTED OF PRESENT BID NUMBER SO AS TO CONTACT OEMS IN CASE OF NON-RESPONSE BY BIDDER AFT ER SUPPLY BEFORE WARRANTY PERIODS ENDS.
- 9.MAKE, MODEL & CAT PART NO OF ITEMS SHOULD BE MENTIONED IN COMPLIANCE OF BOQ .
- 10.EMD MUST REACH THIS OFFICE WITHIN 05 WORKING DAYS FROM BID OPENING DATE IN TOKEN OF UPLOADED EMD EXTRACT, FAILING WHICH BIDDER WILL BE DISQUALIFIED. THE EMD WILL BE RETURNED AS PER GTC STIPULATED TIME FRAME.
- 11.IN CASE DIFFERENT GOLDEN TECHNICAL PARAMETERS ARE ERRONEOUSLY PUBLISHED AGAINST S AME SPECIFICATION IN THE BID IN THE SAME CATALOGUE DUE TO ANY TECHNICAL REASONS/ ERRORS ON WEB PORTAL, THE HIGHER PARAMETER SHALL BE CONSIDERED FOR QUOTING.
- 12.ALL MATERIAL SHALL BE SUPPLIED AT CONSIGNEE LOCATION.
- 13.REGISTRATION CERTIFICATE OF FIRM MUST BE UPLOADED.
- 14.IN CASE ABOVE SIMILAR PROVISION MENTIONED AT ANY LOCATION OF THE BID, ABOVE PROVISION S WILL SUPERSEDE .
Similar open tenders
Soonest first- TodayclosesCopper Alloy Taps/Stop Valves (V2) Conforming To IS 8931, Ceramic ( Vitreous China ) Flus…Ministry of Defence · Closes 15 Oct 2026
- 15h 25mleftPLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES C…Ministry of Defence · Closes 16 Oct 2026
- 1 dayleftSluice Valve For Water Works Purposes (50 To 1200 Mm Size) (V2) As Per Is 14846, Copper A…Ministry of Defence · Closes 17 Oct 2026
- 1 dayleftCopper Alloy Taps/Stop Valves (V2) Conforming To IS 8931, Health Faucet, PLASTIC BIB TAPS…Ministry of Defence · Closes 17 Oct 2026
- 7 daysleftPLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES C…Ministry of Defence · Closes 23 Oct 2026
- 8 daysleftRotational Moulded Polyethylene Water Storage Tanks (V3) Conforming To IS 12701, Bathroom…Ministry of Defence · Closes 24 Oct 2026
- 10 daysleftCopper Alloy Taps/Stop Valves (V2) Conforming To IS 8931, (Mमशः (ेणी 1 और (ेणी 2 के 'थानी…Ministry of Defence · Closes 26 Oct 2026
- 18 daysleftBathroom Water Shower (V2), (Dमशः (ेणी 1 और (ेणी 2 के 'थानीय आपूित%कता% के jप मI अह%ता 9ा…Ministry of Defence · Closes 3 Nov 2026
Search similar in the explorerFind this tender in the explorer