GeMOpenGoodsReverse auction

Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming To IS 778, (Eमशः (ेणी 1 और (ेणी 2 के 'थानीय आपूित%कता% के jप मJ अह%ता CाD करने के िलए आवPयक/Minimum 50% and 20% Local, Stainless Steel S…

Indian Army

Ministry of Defence › Department of Military Affairs

Delivers to

Karnataka +1 more

Overview

11 facts from the tender

Ministry of Defence published this goods tender on GeM on 15 Oct 2026, for Karnataka +1 more. The estimated value is ₹38.8 L and the EMD is ₹1.2 L. It closes on 16 Oct 2026, 5:00 pm IST. Bid number GEM/2026/R/752686.

From the bid document

TimelineBid → reverse auction

Bid closed12 Oct 2026 · 4:00 pm
RA issued14 Oct 2026
RA started15 Oct 2026 · 5:00 pm
RA endsin 20h 9m16 Oct 2026 · 5:00 pm

Parent bid GEM/2026/B/8011389Bid document

Bidding

Bid type: Reverse auction
Evaluation method: Total value wise evaluation
Packet type: Two Packet Bid
Reverse auction: Yes, H1-Highest Priced Bid Elimination
Auction for bid: GEM/2026/B/8011389
Total quantity: 981

Buyer

Created by: sbso@e3
Location: Bangalore, Kanchipuram · Karnataka, Tamil Nadu
Portal: GeM

Important dates

Published: 15 Oct 2026, 5:00 pm IST
Closes: 16 Oct 2026, 5:00 pm IST

Bid & reverse auction

This reverse auction is the price round of bid GEM/2026/B/8011389. GeM's auction document lists only the auction, so the items, delivery, eligibility and buyer terms below come from the bid document and are marked From the bid document.

Bid document (PDF) Reverse auction document (PDF)

Items & delivery

From the bid document

23 items · Address masked by GeM

01Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming To IS 778Quantity25 piecesDelivery30 daysDetailsClose

Delivery locations · 2
Delivery location	Quantity	Delivery
***********Bangalore	15 pieces	30 days
***********Bangalore	10 pieces	30 days

Specifications & requirements

Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Conformity to IS 778: Yes
End Connection: Screwed Ends
Nominal Size of Valves (in mm): 40 mm
Pressure Classification: Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa
Gate Valve Type: Solid Wedge Type
Bonnet Type/Design: Screwed - in bonnet renewable seats
Material of Body: Brass (conforming to DCB 2 of IS 1264)
Material of Bonnet/Cover Material: Forged brass (conforming to CuZn,2Pb2 of IS 3288)
Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable: Leaded Tin Bronze (conforming to LTB 2 of IS 318)
Material of Stem, hinge pin and plug: Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
Material of Gland Packing: Hemp and Jute (conforming to IS 5414)
Minimum Length of Threaded Portion at the end (in mm): 13.5 mm
Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm): 5.0 mm
Minimum Width of ends for both Class 1 and Class 2 Valves (in mm): 15.0 mm
Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm): 12 mm
Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm): 55 mm
End to End Dimensions of Screwed End Valves (in mm): As per Table 9 of IS 778
Face to Face Dimensions of Flanged Valves (in mm): NA for Screwed Valves

View PDF · p. 6

02Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming To IS 778Quantity23 piecesDelivery30 daysDetailsClose

Delivery locations · 2
Delivery location	Quantity	Delivery
***********Bangalore	15 pieces	30 days
***********Bangalore	8 pieces	30 days

Specifications & requirements

Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Conformity to IS 778: Yes
End Connection: Screwed Ends
Nominal Size of Valves (in mm): 50 mm
Pressure Classification: Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa
Gate Valve Type: Solid Wedge Type
Bonnet Type/Design: Screwed - in bonnet integral seats
Material of Body: Brass (conforming to DCB 2 of IS 1264)
Material of Bonnet/Cover Material: Forged brass (conforming to CuZn,2Pb2 of IS 3288)
Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable: Extruded Brass Rod (conforming to Type 1 or Type 2 (Half Hard) of IS 319)
Material of Stem, hinge pin: Extruded Brass Rod (conforming to Type 2 (Half Hard)
and plug: of IS 319)
Material of Gland Packing: Hemp and Jute (conforming to IS 5414)
Minimum Length of Threaded Portion at the end (in mm): 17.0 mm
Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm): 6.0 mm
Minimum Width of ends for both Class 1 and Class 2 Valves (in mm): 20.0 mm
Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm): 12 mm
Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm): 68 mm
End to End Dimensions of Screwed End Valves (in mm): As per Table 9 of IS 778
Face to Face Dimensions of Flanged Valves (in mm): NA for Screwed Valves

View PDF · p. 7

03(Eमशः (ेणी 1 और (ेणी 2 के 'थानीय आपूित%कता% के jप मJ अह%ता CाD करने के िलए आवPयक/Minimum 50% and 20% LocalQuantity5Delivery30 daysDetailsClose

Delivery location

***********Bangalore

GeM masks the full address in this document.

Delivery: 30 days

Specifications & requirements

Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Conformity to IS 778: Yes
End Connection: Screwed Ends
Nominal Size of Valves (in mm): 80 mm
Pressure Classification: Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa
Gate Valve Type: Solid Wedge Type
Bonnet Type/Design: Screwed - in bonnet integral seats
Material of Body: Brass (conforming to DCB 2 of IS 1264)
Material of Bonnet/Cover Material: Brass (conforming to DCB 2 of IS 1264)
Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable: Brass (conforming to DCB 2 of IS 1264)
Material of Stem, hinge pin and plug: Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
Material of Gland Packing: Hemp and Jute (conforming to IS 5414)
Minimum Length of Threaded Portion at the end (in mm): 21.5 mm
Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm): 7.5 mm
Minimum Width of ends for both Class 1 and Class 2 Valves (in mm): 23.5 mm
Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm): 16 mm
Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm): 98 mm
End to End Dimensions of Screwed End Valves (in mm): As per Table 9 of IS 778
Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Face to Face Dimensions of Flanged Valves (in mm): As per Table 11 of IS 778

View PDF · p. 9

04Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming To IS 778Quantity45 piecesDelivery30 daysDetailsClose

Delivery location

***********Bangalore

GeM masks the full address in this document.

Delivery: 30 days

Specifications & requirements

Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Conformity to IS 778: Yes
End Connection: Screwed Ends
Nominal Size of Valves (in mm): 15 mm
Pressure Classification: Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa
Gate Valve Type: Solid Wedge Type
Bonnet Type/Design: Screwed - in bonnet integral seats
Material of Body: Brass (conforming to DCB 2 of IS 1264)
Material of Bonnet/Cover Material: Forged brass (conforming to CuZn,2Pb2 of IS 3288)
Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable: Extruded Brass Rod (conforming to Type 1 or Type 2 (Half Hard) of IS 319)
Material of Stem, hinge pin and plug: Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Material of Gland Packing: Hemp and Jute (conforming to IS 5414)
Minimum Length of Threaded Portion at the end (in mm): 9.5 mm
Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm): 3.7 mm
Minimum Width of ends for both Class 1 and Class 2 Valves (in mm): 11.5 mm
Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm): 8 mm
Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm): 26 mm
End to End Dimensions of Screwed End Valves (in mm): As per Table 9 of IS 778
Face to Face Dimensions of Flanged Valves (in mm): As per Table 11 of IS 778

View PDF · p. 10

05Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming To IS 778Quantity50 piecesDelivery30 daysDetailsClose

Delivery location

***********Bangalore

GeM masks the full address in this document.

Delivery: 30 days

Specifications & requirements

Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Conformity to IS 778: Yes
Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
End Connection: Screwed Ends
Nominal Size of Valves (in mm): 20 mm
Pressure Classification: Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa
Gate Valve Type: Solid Wedge Type
Bonnet Type/Design: Screwed - in bonnet integral seats
Material of Body: Brass (conforming to DCB 2 of IS 1264)
Material of Bonnet/Cover Material: Brass (conforming to DCB 2 of IS 1264)
Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable: Brass (conforming to DCB 2 of IS 1264)
Material of Stem, hinge pin and plug: Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
Material of Gland Packing: Asbestos (conforming to 4687)
Minimum Length of Threaded Portion at the end (in mm): 10.5 mm
Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm): 4.1 mm
Minimum Width of ends for both Class 1 and Class 2 Valves (in mm): 13.0 mm
Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm): 9 mm
Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm): 32 mm
End to End Dimensions of Screwed End Valves (in mm): As per Table 9 of IS 778
Face to Face Dimensions of Flanged Valves (in mm): As per Table 11 of IS 778

View PDF · p. 11

06Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming To IS 778Quantity83 piecesDelivery30 daysDetailsClose

Delivery locations · 2
Delivery location	Quantity	Delivery
***********Bangalore	50 pieces	30 days
***********Bangalore	33 pieces	30 days

Specifications & requirements

Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Conformity to IS 778: Yes
End Connection: Screwed Ends
Nominal Size of Valves (in mm): 25 mm
Pressure Classification: Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa
Gate Valve Type: Solid Wedge Type
Bonnet Type/Design: Screwed - in bonnet integral seats
Material of Body: Brass (conforming to DCB 2 of IS 1264)
Material of Bonnet/Cover Material: Brass (conforming to DCB 2 of IS 1264)
Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable: Extruded Brass Rod (conforming to Type 1 or Type 2 (Half Hard) of IS 319)
Material of Stem, hinge pin and plug: Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
Material of Gland Packing: Hemp and Jute (conforming to IS 5414)
Minimum Length of Threaded Portion at the end (in mm): 12.0 mm
Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm): 4.6 mm
Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Minimum Width of ends for both Class 1 and Class 2 Valves (in mm): 13.0 mm
Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm): 10 mm
Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm): 39 mm
End to End Dimensions of Screwed End Valves (in mm): As per Table 9 of IS 778
Face to Face Dimensions of Flanged Valves (in mm): As per Table 11 of IS 778

View PDF · p. 13

07Stainless Steel Shelf RackQuantity60 piecesDelivery30 daysDetailsClose

Delivery locations · 2
Delivery location	Quantity	Delivery
***********Bangalore	20 pieces	30 days
***********Kanchipuram	40 pieces	30 days

Specifications & requirements

Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Configuration: With 4-Shelf (including top shelf)
Shape of support structure: Round hollow type
Ground clearance (mm): 35 mm
Mode of supply: Knocked Down To Be Assembled At Consignee Site By The Seller
Shelf material: Stainless Steel Grade 202 galvanized
Shelf material thickness: 0.6 mm
Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Support structure material: Stainless Steel Grade 202 galvanized
Support structure material thickness: 0.6 mm
Width of shelf rack ± 10 mm: 915 mm
Depth of shelf rack ± 10 mm: 610 mm
Height of shelf rack ± 10 mm: 1220 mm
Height of support structure ± 10 mm: 1245 mm
Size of support structure: 30 mm x 40 mm
Warranty period: 2 - Year
Test report to be furnished to buyer on demand: No

View PDF · p. 14

08Bathroom Water Shower (V2)Quantity10 piecesDelivery30 daysDetailsClose

Delivery location

***********Bangalore

GeM masks the full address in this document.

Delivery: 30 days

Specifications & requirements

Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Type of shower: Hand Shower
Material of body/face plate: Stainless Steel
Finish of face plate: Chrome plated
Type of Water Flow: Rainfall and Multiple flow
Type of Multiple flow: Rainflow
Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Shape of Shower: Rectangular
Size of Shower: 65x 95 mm
Overall length of Hand Shower (in mm): 200
Length of Hand Shower Tube (in mt): 1.5
Diameter of Hand Shower Tube (in mm): 8
Material of Hand Shower Tube: Stainless Steel
Overall length of Shower Arm (in mm): NA
Warranty (in Years): 1

View PDF · p. 15

09Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity20 piecesDelivery30 daysDetailsClose

Delivery location

***********Bangalore

GeM masks the full address in this document.

Delivery: 30 days

Specifications & requirements

Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Governing Specification: Conforming to IS 8931
Item: Type 2 wall mounted combination tap assembly
Dimension: As per table 6 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm): 15
Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Material of body, body components, nozzle ,: Cast brass
Material of inlet tubes: Brass tubes
Material of flanges: Stainless steel sheet
Material of diverter and diverter components: NA
Material of spindle, glands, washer plate, nuts, screw and pin: Extruded brass rods
Material of circlip, wire locks: Phosphor bronze sheet
Material of 'O' ring , gasket, and seat washer: Synthetic rubber
Material of Knob and knob components: Zinc base alloys
Aerating device fitted with tap: Yes
Flow straightening device fitted with tap: Yes
Warranty (in months): 12

View PDF · p. 16

10Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity60 piecesDelivery30 daysDetailsClose

Delivery locations · 2
Delivery location	Quantity	Delivery
***********Bangalore	30 pieces	30 days
***********Bangalore	30 pieces	30 days

Specifications & requirements

Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Governing Specification: Conforming to IS 8931
Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Item: Type 1 Bib tap
Dimension: As per table 4 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm): 15
Material of body, body components, nozzle , bonnet and back nuts: Cast brass
Material of inlet tubes: Copper tubes
Material of flanges: Stainless steel sheet
Material of diverter and diverter components: NA
Material of spindle, glands, washer plate, nuts, screw and pin: Extruded brass rods
Material of circlip, wire locks: Phosphor bronze sheet
Material of 'O' ring , gasket, and seat washer: Synthetic rubber
Material of Knob and knob components: Zinc base alloys
Aerating device fitted with tap: Yes
Flow straightening device fitted with tap: No
Warranty (in months): 12

View PDF · p. 17

11Plastic Seats And Covers For Water - Closets As Per IS 2548Quantity37 piecesDelivery30 daysDetailsClose

Delivery locations · 3
Delivery location	Quantity	Delivery
***********Bangalore	7 pieces	30 days
***********Kanchipuram	20 pieces	30 days
***********Bangalore	10 pieces	30 days

Specifications & requirements

Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Materials of Seat and Covers: Polystyrene
Materials of Hinging Device: Suitable Plastic(with reinforcement)
Seat: Grade 1
Cover: Grade 1

View PDF · p. 19

12Ceramic ( Vitreous China ) Flushing Cisterns For Water Closets And Urinals Conforming To IS 774Quantity63 piecesDelivery30 daysDetailsClose

Delivery locations · 3
Delivery location	Quantity	Delivery
***********Bangalore	33 pieces	30 days
***********Kanchipuram	20 pieces	30 days
***********Bangalore	10 pieces	30 days

Specifications & requirements

Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Conformity to IS 774: Yes
Flushing Device: Cistern
Material for Flush Pipe: Polyethylene Pipe (Conformity to Is 4984)
Material for Overflow Pipe: Polyethylene Pipe (Conformity to Is 4984)
Cistern Discharge Capacity: Full Flush (6 ± 0.5 liters) Reduced Flush (3 ± 0.5 liters)

View PDF · p. 19

13Rotational Moulded Polyethylene Water Storage Tanks (V3) Conforming To IS 12701Quantity35 piecesDelivery30 daysDetailsClose

Delivery locations · 3
Delivery location	Quantity	Delivery
***********Bangalore	25 pieces	30 days
***********Kanchipuram	5 pieces	30 days
***********Bangalore	5 pieces	30 days

Specifications & requirements

Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Type (Based on Shape of Tank): Cylindrical Vertical Tank with Lid
Layer of Tank: Double Layered
Minimum Net Capacity (In Liter): 1000 Liter

View PDF · p. 20

14Rotational Moulded Polyethylene Water Storage Tanks (V3) Conforming To IS 12701Quantity48 piecesDelivery30 daysDetailsClose

Delivery locations · 3
Delivery location	Quantity	Delivery
***********Bangalore	23 pieces	30 days
***********Kanchipuram	20 pieces	30 days
***********Bangalore	5 pieces	30 days

Specifications & requirements

Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Type (Based on Shape of Tank): Cylindrical Vertical Tank with Lid
Layer of Tank: Double Layered
Minimum Net Capacity (In Liter): 500 Liter

View PDF · p. 20

15Rotational Moulded Polyethylene Water Storage Tanks (V3) Conforming To IS 12701Quantity23 piecesDelivery30 daysDetailsClose

Delivery location

***********Bangalore

GeM masks the full address in this document.

Delivery: 30 days

Specifications & requirements

Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Type (Based on Shape of Tank): Cylindrical Vertical Tank with Lid
Layer of Tank: Double Layered
Minimum Net Capacity (In Liter): 700 Liter

View PDF · p. 21

16Towel RailQuantity55 piecesDelivery30 daysDetailsClose

Delivery locations · 2
Delivery location	Quantity	Delivery
***********Bangalore	15 pieces	30 days
***********Kanchipuram	40 pieces	30 days

Specifications & requirements

Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Rail Material: Stainless Steel (SS 304)
Mounting Bracket Material: Stainless Steel (SS 304)
Towel Rail Length (in mm) (Tolerance : ± 10 mm): 600 mm
Rail Diameter/Thickness (in mm) (Tolerance : ± 10 mm): 19 mm
Projection from Wall (in mm) (Tolerance : ± 10 mm): 60 mm
Towel Rail Type: Single Bar
Bar Shape of Rail: Round
Surface Finish/Color: Chrome Plated
Recommended Load Capacity (in kg): Up to 3 kg
Fixing Hardware Included: Yes
Fasteners Material: Plastic

View PDF · p. 22

17Waste Fittings For Washbasin And Sinks As Per IS 2963Quantity25 piecesDelivery30 daysDetailsClose

Delivery location

***********Bangalore

GeM masks the full address in this document.

Delivery: 30 days

Specifications & requirements

Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Material of Waste Fitting: Brass conforming to Grade 3 of IS 292/1961
Nominal Size: 50 mm for sink
WARANTEE PERIOD IN NUMBER OF YEARS: 3

View PDF · p. 23

18Waste Fittings For Washbasin And Sinks As Per IS 2963Quantity98 piecesDelivery30 daysDetailsClose

Delivery locations · 3
Delivery location	Quantity	Delivery
***********Bangalore	33 pieces	30 days
***********Kanchipuram	50 pieces	30 days
***********Bangalore	15 pieces	30 days

Specifications & requirements

Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Material of Waste Fitting: Brass conforming to Grade 3 of IS 292/1961
Nominal Size: 32 mm for washbasin
WARANTEE PERIOD IN NUMBER OF YEARS: 1

View PDF · p. 23

19Towel RailQuantity30 piecesDelivery30 daysDetailsClose

Delivery location

***********Bangalore

GeM masks the full address in this document.

Delivery: 30 days

Specifications & requirements

Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Rail Material: Stainless Steel (SS 202)
Mounting Bracket Material: Stainless Steel (SS 202)
Towel Rail Length (in mm) (Tolerance : ± 10 mm): 300 mm
Rail Diameter/Thickness (in mm) (Tolerance : ± 10 mm): 16 mm
Projection from Wall (in mm) (Tolerance : ± 10 mm): 60 mm
Towel Rail Type: Single Bar
Bar Shape of Rail: Round
Surface Finish/Color: Chrome Plated
Recommended Load Capacity (in kg): Up to 3 kg
Fixing Hardware Included: No
Fasteners Material: Stainless Steel

View PDF · p. 24

20Stainless Steel Sinks For Domestic Purposes (V3) As Per IS 13983Quantity40 piecesDelivery30 daysDetailsClose

Delivery locations · 2
Delivery location	Quantity	Delivery
***********Bangalore	30 pieces	30 days
***********Bangalore	10 pieces	30 days

Specifications & requirements

Bis Required: Yes
Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Confirmity to standard IS 13983 and ISI Marked: Yes
Type of Bowl: Rectangular
Type of Sink built in counter shall be as per clause 4 Of IS 13983: Single bowl single drainer- right or left hand
Material used stainless steel of Grade Designation used as per clause 5 of IS 13983: SS 304 Or higher
Sinks shall be provided, in one of the following conditions as per clause 7.5 of IS 13983: Without tap holes
Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove confirmity to specification: No
Test Report to be furnished to the buyer on demand: Yes

View PDF · p. 25

21Bathroom Or Toilet Mirror (V3)Quantity78 piecesDelivery30 daysDetailsClose

Delivery locations · 3
Delivery location	Quantity	Delivery
***********Bangalore	23 pieces	30 days
***********Bangalore	20 pieces	30 days
***********Kanchipuram	35 pieces	30 days

Specifications & requirements

Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Type of Mirror: Plain Mirror
Mirror Shape: Rectangular
Type of Mirror Coating: Aluminium Coated
Frame: With
Frame Material: Plastic
Frame Color: White
Mirror Mounting/Fixing System: Wall Hanging System (Hook/Hanger)
Width/Diameter of Mirror (inch): >15 to ?20
Height/Diameter of Mirror (inch): >20 to ?25
Thickness of Mirror (mm): >5 to ?7.5

View PDF · p. 26

22Weld Mesh Febric As Per IS 4948Quantity20 piecesDelivery30 daysDetailsClose

Delivery location

***********Bangalore

GeM masks the full address in this document.

Delivery: 30 days

Specifications & requirements

Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Material: Stainless steel wire grade X 04 Cr 17 Ni 12 Mo 2 of IS 6528
Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Square Mesh Size (centre to centre distance bothways) ± 5 % (mm): NA for Oblong Mesh
Nominal Diameter of Square Mesh Wire: 1.6 mm
Oblong Mesh Size Pitch of Wire Longitudinal (± 5 %): 50 mm
Oblong Mesh Size Pitch of Wire Transverse (± 5 %): 25 mm
Nominal Diameter of Oblong Mesh Wire Longitudinal: 2.5 mm
Nominal Diameter of Oblong Mesh Wire Transverse: 2.5 mm
Width of Fabric: 1.2 m
Length of Fabric: 10(for roll only)
ISI Marked: Yes, No

View PDF · p. 26

23Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity48 piecesDelivery30 daysDetailsClose

Delivery locations · 2
Delivery location	Quantity	Delivery
***********Bangalore	23 pieces	30 days
***********Bangalore	25 pieces	30 days

Specifications & requirements

Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Governing Specification: Conforming to IS 8931
Item: Type 2 Bib tap
Dimension: As per table 4 of the governing specification
Specification Name: बड के िलए आवPयक अनुमत मूYय /Bid Requirement (Allowed Values)
Nominal Size of bore of pipe to which taps and valves are fitted(in mm): 15
Material of body, body components, nozzle , bonnet and back nuts: Cast brass
Material of inlet tubes: Brass tubes
Material of flanges: Stainless steel sheet
Material of diverter and diverter components: NA
Material of spindle, glands, washer plate, nuts, screw and pin: Extruded brass rods
Material of circlip, wire locks: Phosphor bronze sheet
Material of 'O' ring , gasket, and seat washer: Synthetic rubber
Material of Knob and knob components: Forged brass
Aerating device fitted with tap: Yes
Flow straightening device fitted with tap: Yes
Warranty (in months): 12

View PDF · p. 27

Tender documents

Bid files and supporting documents, linked directly from GeM.

Reverse auction documentOpen
Auction dates, extension rule and offer validity
Bid documentOpen
Items, delivery, eligibility and buyer terms: the auction runs on these
GeM category specificationOpen
Applies to item 1 · From the bid document
GeM category specificationOpen
Applies to item 2 · From the bid document
GeM category specificationOpen
Applies to item 3 · From the bid document
GeM category specificationOpen
Applies to item 4 · From the bid document
GeM category specificationOpen
Applies to item 5 · From the bid document
GeM category specificationOpen
Applies to item 6 · From the bid document
GeM category specificationOpen
Applies to item 7 · From the bid document
GeM category specificationOpen
Applies to item 8 · From the bid document
GeM category specificationOpen
Applies to item 9 · From the bid document
GeM category specificationOpen
Applies to item 10 · From the bid document
GeM category specificationOpen
Applies to item 11 · From the bid document
GeM category specificationOpen
Applies to item 12 · From the bid document
GeM category specificationOpen
Applies to item 13 · From the bid document
GeM category specificationOpen
Applies to item 14 · From the bid document
GeM category specificationOpen
Applies to item 15 · From the bid document
GeM category specificationOpen
Applies to item 16 · From the bid document
GeM category specificationOpen
Applies to item 17 · From the bid document
GeM category specificationOpen
Applies to item 18 · From the bid document
GeM category specificationOpen
Applies to item 19 · From the bid document
GeM category specificationOpen
Applies to item 20 · From the bid document
GeM category specificationOpen
Applies to item 21 · From the bid document
GeM category specificationOpen
Applies to item 22 · From the bid document
GeM category specificationOpen
Applies to item 23 · From the bid document
Buyer uploaded ATC documentOpen
From the bid document

Policy & contract references

General terms and conditionsOpen
From the reverse auction
Public procurement policy — concurrent applicationOpen
From the bid document
General terms and conditionsOpen
From the bid document

Documents you must submit

Experience Criteria
Past Performance
Bidder Turnover
Certificate (Requested in ATC)
OEM Authorization Certificate
OEM Annual Turnover

Eligibility

From the bid and reverse-auction documents

Experience

3 years

Min. turnover

₹19 L

a year, 3-year average

OEM turnover

₹39 L

Past performance

50%

of the bid quantity

Experience & turnover exemptions

Micro & small enterprises (MSE)

Complete exemption

From the reverse auction

Exemption conditions

Yes | Complete

View PDF · p. 1

Startups

Complete exemption

From the reverse auction

Exemption conditions

Yes | Complete

View PDF · p. 1

Exemptions depend on the evidence and conditions specified in the bid.

Preferences & relaxations

From the bid document

MSE purchase preference
MII preference
Class-1/2 local suppliers
EMD exemption: no
Inspection required: no

Check each criterion against the tender notice before you bid.

Commercial conditions

From the bid document

EMD: ₹116,433
Performance guarantee: 5% for 14 months
Offer validity: 90 days

Reverse auction extension

From the reverse auction

If any seller submits the offer price during last 15 minutes of RA end time, then RA will be automatically extended for next 15 minutes from the last participation time. There is no limit on such RA extension cycle.

View PDF · p. 1

Buyer requirements & conditions

Buyer-added conditions from the bid and the reverse-auction documents.

From the bid document

Generic

View PDF · p. 29

OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up to 25 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to increase the ordered quantity up to 25% of the contracted quantity during the currency of the contract at the contracted rates. The delivery period of quantity shall commence from the last date of original delivery order and in cases where option clause is exercised during the extended delivery period the additional time shall commence from the last date of extended delivery period. The additional delivery time shall be (Increased quantity ÷ Original quantity) × Original delivery period (in days), subject to minimum of 30 days. If the original delivery period is less than 30 days, the additional time equals the original delivery period. The Purchaser may extend this calculated delivery duration up to the original delivery period while exercising the option clause. Bidders must comply with these terms.

Forms of EMD and PBG

View PDF · p. 29

Bidders can also submit the EMD with Account Payee Demand Draft in favour of CWE(AF) North Bangalore payable at Bangalore . Bidder has to upload scanned copy / proof of the DD along with bid and has to ensure delivery of hardcopy to the Buyer within 5 days of Bid End date / Bid Opening date.

Generic

View PDF · p. 29

Experience Criteria: The Bidder or its OEM {themselves or through reseller(s)} should have regularly, manufactured and supplied same or similar Category Products to any Central / State Govt Organization / PSU for 3 years before the bid opening date. Copies of relevant contracts to be submitted along with bid in support of having supplied some quantity during each of the year. In case of bunch bids, the primary product having highest value should meet this criterion.

Generic

View PDF · p. 29

1.The Seller shall not assign the Contract in whole or part without obtaining the prior written consent of buyer.
2.The Seller shall not sub-contract the Contract in whole or part to any entity without obtaining the prior written consent of buyer.
3.The Seller shall, notwithstanding the consent and assignment/sub-contract, remain jointly and severally liable and responsible to buyer together with the assignee/ sub-contractor, for and in respect of the due performance of the Contract and the Sellers obligations there under.

Buyer Added Bid Specific ATC

View PDF · p. 29

Buyer Added text based ATC clauses The bidders to ensure during quote the bid, the following specification will be required in place of whatever specification quoted in the bid : Sr No 1 to 6 - Gate Valves should be ISI marked Sr No 13 to 15 - Tank should be Triple Layered Sr No 22- Wire mesh should be Stainless Steel .

Buyer Added Bid Specific ATC

View PDF · p. 30

Buyer uploaded ATC document Click here to view the file.

From the reverse auction

Reverse auction — offer validity

View PDF · p. 2

Participation by the bidder in RA process would be considered as their consent for extension in offer validity by 30 days by the date of RA initiation.

Similar open tenders

Soonest first

Open on GeM