Browse all bids
GeMOpenGoodsReverse auction

Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931, (Mमशः 3ेणी 1 और 3ेणी 2 के 1थानीय आपूित%कता% के mप म5 अह%ता @ाL करने के िलए आवVयक/Minimum 50% and 20% Local, Stainless Steel Sinks For Domesti…

Indian Army

Ministry of Defence › Department of Military Affairs

Delivers to

South West Delhi, Delhi

Overview

11 facts from the tender

Ministry of Defence published this goods tender on GeM on 16 Oct 2026, for South West Delhi, Delhi. The EMD is ₹1.8 L. It closes on 17 Oct 2026, 5:00 pm IST. Bid number GEM/2026/R/753426.

From the bid document

TimelineBid → reverse auction

  1. Bid published18 Sep 2026
  2. Bid closed28 Sep 2026 · 5:00 pm
  3. RA issued15 Oct 2026
  4. RA ends17 Oct 2026 · 5:00 pm

Parent bid GEM/2026/B/7998508Bid document

Bidding

Bid type
Reverse auction
Evaluation method
Total value wise evaluation
Packet type
Two Packet Bid
Reverse auction
Yes, H1-Highest Priced Bid Elimination
Auction for bid
GEM/2026/B/7998508
Total quantity
11,447

Buyer

Created by
sbsocwendldz3
Location
South West Delhi · Delhi
Portal
GeM

Important dates

Published
16 Oct 2026, 5:00 pm IST
Closes
17 Oct 2026, 5:00 pm IST

Bid & reverse auction

This reverse auction is the price round of bid GEM/2026/B/7998508. GeM's auction document lists only the auction, so the items, delivery, eligibility and buyer terms below come from the bid document and are marked From the bid document.

Bid document (PDF) Reverse auction document (PDF)

Items & delivery

From the bid document

182 items · Address masked by GeM

Showing 182 of 182
01Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity6 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Concealed stop valve
Dimension
As per table 5 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Cast brass
Material of inlet tubes
Copper tubes
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Material of flanges
Cast brass
Material of diverter and diverter components
NA
Material of spindle, glands,
Extruded brass rods
Material of circlip, wire locks
Stainless steel
Material of 'O' ring , gasket, and seat washer
Synthetic butadiene rubber (SBR)
Material of Knob and knob components
Cast brass
Aerating device fitted with tap
No
Flow straightening device fitted with tap
No
Warranty (in months)
6
View PDF · p. 23
02Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity140 piecesDelivery45 daysDetailsClose
Delivery locations · 3
Delivery locationQuantityDelivery
***********South West delhi31 pieces45 days
***********South West delhi35 pieces45 days
***********South West delhi74 pieces45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Angle stop valve
Dimension
As per table 5 of the governing specification
Specification
बड के िलए आवVयक अनुमत मू\य /Bid Requirement
Name
(Allowed Values)
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Die cast brass
Material of inlet tubes
Brass tubes
Material of flanges
Stainless steel sheet
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Extruded brass rods
Material of circlip, wire locks
Stainless steel
Material of 'O' ring , gasket, and seat washer
Neoprene rubber
Material of Knob and knob components
Die cast brass
Aerating device fitted with tap
No
Flow straightening device fitted with tap
Yes
Warranty (in months)
6
View PDF · p. 24
03Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity4 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Angle stop valve
Dimension
As per table 5 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
20
Material of body, body components, nozzle , bonnet and back nuts
Cast brass
Material of inlet tubes
Brass tubes
Material of flanges
Cast brass
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Extruded brass rods
Material of circlip, wire locks
Phosphor bronze sheet
Material of 'O' ring , gasket, and seat washer
Acrylonitrille butadiene rubber (ABR)
Material of Knob and knob components
Cast brass
Aerating device fitted with tap
No
Flow straightening device fitted with tap
No
Warranty (in months)
6
View PDF · p. 25
04(Mमशः 3ेणी 1 और 3ेणी 2 के 1थानीय आपूित%कता% के mप म5 अह%ता @ाL करने के िलए आवVयक/Minimum 50% and 20% LocalQuantity151Delivery45 daysDetailsClose
Delivery locations · 3
Delivery locationQuantityDelivery
***********South West delhi3745 days
***********South West delhi4145 days
***********South West delhi7345 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Type 1 Bib tap
Dimension
As per table 4 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Cast brass
Material of inlet tubes
Brass tubes
Material of flanges
Stainless steel sheet
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Extruded brass rods
Material of circlip, wire locks
Phosphor bronze sheet
Material of 'O' ring , gasket, and seat washer
Synthetic rubber
Material of Knob and knob components
Zinc base alloys
Aerating device fitted with tap
Yes
Flow straightening device fitted with tap
Yes
Warranty (in months)
12
View PDF · p. 27
05Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity74 piecesDelivery45 daysDetailsClose
Delivery locations · 2
Delivery locationQuantityDelivery
***********South West delhi21 pieces45 days
***********South West delhi53 pieces45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Type 1 Bib tap
Dimension
As per table 4 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Cast brass
Material of inlet tubes
Brass tubes
Material of flanges
Stainless steel sheet
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Extruded brass rods
Material of circlip, wire locks
Stainless steel
Material of 'O' ring , gasket, and seat washer
Synthetic rubber
Material of Knob and knob components
Zinc base alloys
Aerating device fitted with tap
Yes
Flow straightening device fitted with tap
Yes
Warranty (in months)
12
CP Brass Bib Cock 15 mm Long Body , IS 8931-1993
CP Brass Bib Cock 15 mm Long Body , IS 8931-1993
View PDF · p. 28
06Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity31 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Type 1 Bib tap
Dimension
As per table 4 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Die cast brass
Material of inlet tubes
Brass tubes
Material of flanges
Cast brass
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Extruded brass rods
Material of circlip, wire locks
Phosphor bronze sheet
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Material of 'O' ring , gasket, and seat washer
Synthetic butadiene rubber (SBR)
Material of Knob and knob components
Zinc base alloys
Aerating device fitted with tap
No
Flow straightening device fitted with tap
Yes
Warranty (in months)
6
CP brass Bib Taps With Nozzle 15mm
CP brass Bib Taps With Nozzle 15mm
View PDF · p. 29
07Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity117 piecesDelivery45 daysDetailsClose
Delivery locations · 2
Delivery locationQuantityDelivery
***********South West delhi65 pieces45 days
***********South West delhi52 pieces45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Angle stop valve
Dimension
As per table 5 of the governing specification
Specification
बड के िलए आवVयक अनुमत मू\य /Bid Requirement
Name
(Allowed Values)
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Cast brass
Material of inlet tubes
Brass tubes
Material of flanges
Brass sheet
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Forged brass
Material of circlip, wire locks
Phosphor bronze sheet
Material of 'O' ring , gasket, and seat washer
Synthetic rubber
Material of Knob and knob components
Zinc base alloys
Aerating device fitted with tap
Yes
Flow straightening device fitted with tap
Yes
Warranty (in months)
12
View PDF · p. 30
08Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity48 piecesDelivery45 daysDetailsClose
Delivery locations · 2
Delivery locationQuantityDelivery
***********South West delhi16 pieces45 days
***********South West delhi32 pieces45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Stop valve with external thread
Dimension
As per table 5 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Brass rods
Material of inlet tubes
Brass tubes
Material of flanges
Stainless steel sheet
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Forged brass
Material of circlip, wire locks
Stainless steel
Material of 'O' ring , gasket, and seat washer
Synthetic rubber
Material of Knob and knob components
Zinc base alloys
Aerating device fitted with tap
No
Flow straightening device fitted with tap
No
Warranty (in months)
12
View PDF · p. 31
09Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity15 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Stop valve with external thread
Dimension
As per table 5 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
20
Material of body, body components, nozzle , bonnet and back nuts
Cast brass
Material of inlet tubes
Brass tubes
Material of flanges
Cast brass
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Forged brass
Material of circlip, wire locks
Stainless steel
Material of 'O' ring , gasket, and seat washer
Synthetic rubber
Material of Knob and knob components
Forged brass
Aerating device fitted with tap
Yes
Flow straightening device fitted with tap
Yes
Warranty (in months)
24
View PDF · p. 33
10Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity35 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Pillar tap
Dimension
As per table 3 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Die cast brass
Material of inlet tubes
Brass tubes
Material of flanges
Die cast brass
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Forged brass
Material of circlip, wire locks
Stainless steel
Material of 'O' ring , gasket, and seat washer
Synthetic rubber
Material of Knob and knob components
Forged brass
Aerating device fitted with tap
Yes
Flow straightening device fitted with tap
Yes
Warranty (in months)
12
View PDF · p. 34
11Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity4 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Type 2 Bib tap
Dimension
As per table 4 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Cast brass
Material of inlet tubes
Brass tubes
Material of flanges
Cast brass
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Rolled brass rods
Material of circlip, wire locks
Stainless steel
Material of 'O' ring , gasket, and seat washer
Synthetic rubber
Material of Knob and knob components
Cast brass
Aerating device fitted with tap
No
Flow straightening device fitted with tap
No
Warranty (in months)
6
CP 2 IN 1 Bib cock 15mm bore short body
CP 2 IN 1 Bib cock 15mm bore short body.
View PDF · p. 35
12Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity42 piecesDelivery45 daysDetailsClose
Delivery locations · 3
Delivery locationQuantityDelivery
***********South West delhi8 pieces45 days
***********South West delhi3 pieces45 days
***********South West delhi31 pieces45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Single lever pillar mounted basin mixture
Dimension
As per table 12 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Cast brass
Material of inlet tubes
Brass tubes
Material of flanges
Cast brass
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Forged brass
Material of circlip, wire locks
Stainless steel
Material of 'O' ring , gasket, and seat washer
Synthetic rubber
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Material of Knob and knob components
Plastic
Aerating device fitted with tap
No
Flow straightening device fitted with tap
No
Warranty (in months)
12
CP Centre Hole Basin Mixer 15 MM ,minimum weight 900 Gm
CP Centre Hole Basin Mixer 15 MM ,minimum weight 900 Gm
View PDF · p. 36
13Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity5 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Single lever pillar mounted basin mixture
Dimension
As per table 12 of the governing specification
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Cast brass
Material of inlet tubes
Brass tubes
Material of flanges
Cast brass
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Forged brass
Material of circlip, wire locks
Stainless steel
Material of 'O' ring , gasket, and seat washer
Synthetic rubber
Material of Knob and knob components
Plastic
Aerating device fitted with tap
No
Flow straightening device fitted with tap
No
Warranty (in months)
12
Swan neck type basin mixture 15mm dia with swing spout and aerator, made of cast copper alloy, chromium plated fancy type
Swan neck type basin mixture 15mm dia with swing spout and aerator, made of cast copper alloy, chromium plated fancy type.
View PDF · p. 37
14Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity3 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Single lever pillar mounted basin mixture
Dimension
As per table 12 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Cast brass
Material of inlet tubes
Brass tubes
Material of flanges
Cast brass, Stainless steel sheet
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Extruded brass rods
Material of circlip, wire locks
Phosphor bronze sheet
Material of 'O' ring , gasket, and seat washer
Synthetic rubber
Material of Knob and knob components
Cast brass, Zinc base alloys
Aerating device fitted with tap
No, Yes
Flow straightening device fitted with tap
Yes
Warranty (in months)
6, 24
CP brass Centre hole basin mixer 15mm bore double action
CP brass Centre hole basin mixer 15mm bore double action
View PDF · p. 39
15Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity7 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Single lever wall mounted sink mixture with swivel spout
Dimension
As per table 13 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Cast brass
Material of inlet tubes
Copper tubes
Material of flanges
Stainless steel sheet
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Rolled brass rods
Material of circlip, wire locks
Phosphor bronze sheet
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Material of 'O' ring , gasket, and seat washer
Synthetic rubber
Material of Knob and knob components
Cast brass
Aerating device fitted with tap
No
Flow straightening device fitted with tap
No
Warranty (in months)
12
Swan neck sink cock 15mm dia with swing spout and aerator, made of cast copper alloy, chromium plated fancy type
Swan neck sink cock 15mm dia with swing spout and aerator, made of cast copper alloy, chromium plated fancy type.
View PDF · p. 40
16Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity6 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Type 3 wall mounted combination tap assembly
Dimension
As per table 6 of the governing specification
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Die cast brass
Material of inlet tubes
Copper tubes
Material of flanges
Brass sheet
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Rolled brass rods
Material of circlip, wire locks
Phosphor bronze wire
Material of 'O' ring , gasket, and seat washer
Synthetic rubber
Material of Knob and knob components
Zinc base alloys
Aerating device fitted with tap
Yes
Flow straightening device fitted with tap
Yes
Warranty (in months)
36
Wall mixer 15mm dia with flexible hand shower tube and hand shower, made of cast copper alloy, chromium plated fancy type
Wall mixer 15mm dia with flexible hand shower tube and hand shower, made of cast copper alloy, chromium plated fancy type.
View PDF · p. 41
17Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity4 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Type 3 wall mounted combination tap assembly
Dimension
As per table 6 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Die cast brass
Material of inlet tubes
Brass tubes
Material of flanges
Brass sheet
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Rolled brass rods
Material of circlip, wire locks
Phosphor bronze wire
Material of 'O' ring , gasket, and seat washer
Synthetic rubber
Material of Knob and knob components
Zinc base alloys
Aerating device fitted with tap
Yes
Flow straightening device fitted with tap
Yes
Warranty (in months)
36
CP brass Wall mixer telephonic 15mm with crutch & wall flange for bend set with telephonic over head shower
CP brass Wall mixer telephonic 15mm with crutch & wall flange for bend set with telephonic over head shower
View PDF · p. 43
18Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity5 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Type 3 wall mounted combination tap assembly
Dimension
As per table 6 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Forged brass
Material of inlet tubes
Copper tubes
Material of flanges
Stainless steel sheet
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Rolled brass rods
Material of circlip, wire locks
Stainless steel
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Material of 'O' ring , gasket, and seat washer
Neoprene rubber
Material of Knob and knob components
Zinc base alloys
Aerating device fitted with tap
No
Flow straightening device fitted with tap
No
Warranty (in months)
12
CP brass wall mixer "L" bend with wall flange over head Shower 15mm
CP brass wall mixer "L" bend with wall flange over head Shower 15mm
View PDF · p. 44
19Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity9 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Type 2 Bib tap
Dimension
As per table 4 of the governing specification
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Cast brass
Material of inlet tubes
Brass tubes
Material of flanges
Die cast brass
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Extruded brass rods
Material of circlip, wire locks
Stainless steel
Material of 'O' ring , gasket, and seat washer
Synthetic rubber
Material of Knob and knob components
Cast brass
Aerating device fitted with tap
Yes
Flow straightening device fitted with tap
No
Warranty (in months)
6
CP brass Two Way angle cock with Bib Tap 15 mm
CP brass Two Way angle cock with Bib Tap 15 mm
View PDF · p. 45
20Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity23 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Single lever pillar mounted basin mixture
Dimension
As per table 12 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Cast brass
Material of inlet tubes
Brass tubes
Material of flanges
Stainless steel sheet
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Extruded brass rods
Material of circlip, wire locks
Phosphor bronze sheet
Material of 'O' ring , gasket, and seat washer
Synthetic rubber
Material of Knob and knob components
Zinc base alloys
Aerating device fitted with tap
No
Flow straightening device fitted with tap
Yes
Warranty (in months)
24
CP Pillar WHB Mixture 15 MM
CP Pillar WHB Mixture 15 MM
View PDF · p. 47
21Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity23 piecesDelivery45 daysDetailsClose
Delivery locations · 2
Delivery locationQuantityDelivery
***********South West delhi4 pieces45 days
***********South West delhi19 pieces45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Single lever wall mounted sink mixture with swivel spout
Dimension
As per table 13 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Forged brass
Material of inlet tubes
Brass tubes
Material of flanges
Die cast brass
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Extruded brass rods
Material of circlip, wire locks
Stainless steel
Material of 'O' ring , gasket, and seat washer
Neoprene rubber
Material of Knob and knob components
Zinc base alloys
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Aerating device fitted with tap
Yes
Flow straightening device fitted with tap
Yes
Warranty (in months)
24
CP Sink Mixer 15 mm ,minimum weight 900 Gm
CP Sink Mixer 15 mm ,minimum weight 900 Gm
View PDF · p. 48
22Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity27 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Pillar tap
Dimension
As per table 3 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Material of body, body components, nozzle ,
Die cast brass
Material of inlet tubes
Brass tubes
Material of flanges
Die cast brass
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Forged brass
Material of circlip, wire locks
Stainless steel
Material of 'O' ring , gasket, and seat washer
Synthetic rubber
Material of Knob and knob components
Forged brass
Aerating device fitted with tap
Yes
Flow straightening device fitted with tap
Yes
Warranty (in months)
12
Pillar cock CP 15mm bore
Pillar cock CP 15mm bore .
View PDF · p. 49
23Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity10 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Pillar tap
Dimension
As per table 3 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Die cast brass
Material of inlet tubes
Copper tubes
Material of flanges
Forged brass
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Rolled brass rods
Material of circlip, wire locks
Phosphor bronze sheet
Material of 'O' ring , gasket, and seat washer
Synthetic rubber
Material of Knob and knob components
Zinc base alloys
Aerating device fitted with tap
Yes
Flow straightening device fitted with tap
Yes
Warranty (in months)
12
Pillar tap 15mm dia with swing spout, made of cast copper alloy, chromium plated fancy type
Pillar tap 15mm dia with swing spout, made of cast copper alloy, chromium plated fancy type.
View PDF · p. 51
24Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity21 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Pillar tap
Dimension
As per table 3 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Material of body, body components, nozzle , bonnet and back nuts
Cast brass
Material of inlet tubes
Copper tubes
Material of flanges
Stainless steel sheet
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Extruded brass rods
Material of circlip, wire locks
Phosphor bronze sheet
Material of 'O' ring , gasket, and seat washer
Synthetic rubber
Material of Knob and knob components
Cast brass
Aerating device fitted with tap
Yes
Flow straightening device fitted with tap
Yes
Warranty (in months)
12
CP brass Pillar Taps With Nozzle 15 mm
CP brass Pillar Taps With Nozzle 15 mm
View PDF · p. 52
25Stainless Steel Sinks For Domestic Purposes (V3) As Per IS 13983Quantity6 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Confirmity to standard IS 13983 and ISI Marked
Yes
Type of Bowl
Rectangular
Type of Sink built in counter shall be as per clause 4 Of IS 13983
Single bowl without drainer
Material used stainless steel of Grade Designation used as per clause 5 of IS 13983
SS 304 Or higher
Sinks shall be provided, in one of the following conditions as per clause 7.5 of IS 13983
Without tap holes
Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove confirmity to specification
No
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Test Report to be furnished to the buyer on demand
No
S S Kitchen Sink of Size 18"x21"x8"
S S Kitchen Sink of Size 18"x21"x8"
View PDF · p. 53
26Stainless Steel Sinks For Domestic Purposes (V3) As Per IS 13983Quantity11 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Confirmity to standard IS 13983 and ISI Marked
Yes
Type of Bowl
Rectangular
Type of Sink built in counter shall be as per clause 4 Of IS 13983
Single bowl without drainer
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Material used stainless steel of Grade Designation used as per clause 5 of IS 13983
SS 304 Or higher
Sinks shall be provided, in one of the following conditions as per clause 7.5 of IS 13983
Without tap holes
Sinks shall be provided without an overflow hole or with an overflow hole as per clause 7.6 of IS 13983
Without an overflow hole
Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove confirmity to specification
Yes
Test Report to be furnished to the buyer on demand
Yes
S S Kitchen Sink of Size 19"x16"x8"
S S Kitchen Sink of Size 19"x16"x8"
View PDF · p. 54
27Stainless Steel Sinks For Domestic Purposes (V3) As Per IS 13983Quantity4 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Confirmity to standard IS 13983 and ISI Marked
Yes
Type of Bowl
Rectangular
Type of Sink built in counter shall be as per clause 4 Of IS 13983
Single bowl without drainer
Material used stainless steel of Grade Designation used as per clause 5 of IS 13983
SS 304 Or higher
Sinks shall be provided, in one of the following conditions as per clause 7.5 of IS 13983
Without tap holes
Sinks shall be provided without an overflow hole or with an overflow hole as per clause 7.6 of IS 13983
Without an overflow hole
Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove confirmity to specification
No
Test Report to be furnished to the buyer on demand
No
SS Kitchen sink 24"x18"x09" bowel type without drainer bowl size 22"x16"x09"
SS Kitchen sink 24"x18"x09" bowel type without drainer bowl size 22"x16"x09"
View PDF · p. 55
28Stainless Steel Sinks For Domestic Purposes (V3) As Per IS 13983Quantity2 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Confirmity to standard IS 13983 and ISI Marked
Yes
Type of Bowl
Rectangular
Type of Sink built in counter shall be as per clause 4 Of IS 13983
Single bowl without drainer
Material used stainless steel of Grade Designation used as per clause 5 of IS 13983
SS 304 Or higher
Sinks shall be provided, in one of the following conditions as per clause 7.5 of IS 13983
Without tap holes
Sinks shall be provided without an overflow hole or with an overflow hole as per clause 7.6 of IS 13983
Without an overflow hole
Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove confirmity to specification
No
Test Report to be furnished to the buyer on demand
Yes
stainless steel sink, 1.00 mm thick for kitchen overall approx size 610 mm x 460 mm x200 mm with approx bowl size of 510 mm x 410mm x 200 mm etc
stainless steel sink, 1.00 mm thick for kitchen or laboratory with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc overall approx size 610 mm x 460 mm x200 mm with approx bowl size of 510 mm x 410mm x 200 mm etc.
View PDF · p. 57
29Stainless Steel Sinks For Domestic Purposes (V3) As Per IS 13983Quantity4 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Confirmity to standard IS 13983 and ISI Marked
Yes
Type of Bowl
Rectangular
Type of Sink built in counter shall be as per clause 4 Of IS 13983
Single bowl single drainer- right or left hand
Material used stainless steel of Grade Designation used as per clause 5 of IS 13983
SS 304 Or higher
Sinks shall be provided, in one of the following conditions as per clause 7.5 of IS 13983
Without tap holes
Sinks shall be provided without an overflow hole or with an overflow hole as per clause 7.6 of IS 13983
Without an overflow hole, With an overflow hole
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove confirmity to specification
Yes
Test Report to be furnished to the buyer on demand
Yes
S S Kitchen Sink With Drain Board of Size 41"x20"x8"
S S Kitchen Sink With Drain Board of Size 41"x20"x8"
View PDF · p. 58
30Stainless Steel Sinks For Domestic Purposes (V3) As Per IS 13983Quantity6 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Confirmity to standard IS 13983 and ISI Marked
Yes
Type of Bowl
Rectangular
Type of Sink built in counter shall be as per clause 4 Of IS 13983
Single bowl single drainer- right or left hand
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Material used stainless steel of Grade Designation used as per clause 5 of IS 13983
SS 304 Or higher
Sinks shall be provided, in one of the following conditions as per clause 7.5 of IS 13983
Without tap holes
Sinks shall be provided without an overflow hole or with an overflow hole as per clause 7.6 of IS 13983
Without an overflow hole
Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove confirmity to specification
No
Test Report to be furnished to the buyer on demand
Yes
Stainless steel kitchen sink single bowl with drainage board 37"X18"X09" with 01 mm thick bowl size 16"X14"X09"
Stainless steel kitchen sink single bowl with drainage board 37"X18"X09" with 01 mm thick bowl size 16"X14"X09"
View PDF · p. 59
31Stainless Steel Sinks For Domestic Purposes (V3) As Per IS 13983Quantity1 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Confirmity to standard IS 13983 and ISI Marked
Yes
Type of Bowl
Rectangular
Type of Sink built in counter shall be as per clause 4 Of IS 13983
Single bowl single drainer- right or left hand
Material used stainless steel of Grade Designation used as per clause 5 of IS 13983
SS 304 Or higher
Sinks shall be provided, in one of the following conditions as per clause 7.5 of IS 13983
Without tap holes
Sinks shall be provided without an overflow hole or with an overflow hole as per clause 7.6 of IS 13983
Without an overflow hole
Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove confirmity to specification
Yes
Test Report to be furnished to the buyer on demand
Yes
Stainless steel kitchen sink, single bowl with drainage board of overall size 940x455mm and bowl size 405x355x200mm
Stainless steel kitchen sink, single bowl with drainage board of overall size 940x455mm and bowl size 405x355x200mm.
View PDF · p. 60
32Stainless Steel Sinks For Domestic Purposes (V3) As Per IS 13983Quantity2 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Confirmity to standard IS 13983 and ISI Marked
Yes
Type of Bowl
Rectangular
Type of Sink built in counter shall be as per clause 4 Of IS 13983
Double bowl without drainer
Material used stainless steel of Grade Designation used as per clause 5 of IS 13983
SS 304 Or higher
Sinks shall be provided, in one of the following conditions as per clause 7.5 of IS 13983
With single tap hole of 35 ± 2 mm diameter
Sinks shall be provided without an overflow hole or with an overflow hole as per clause 7.6 of IS 13983
Without an overflow hole, With an overflow hole
Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove confirmity to specification
Yes
Test Report to be furnished to the buyer on demand
Yes
Stainless steel sink double bowl, 1.00 mm thick for kitchen overall approx size 915 mm x 460mm X 200 mm with approx bowl size of 410 mm x 355mm x 200 mm etc
Stainless steel sink double bowl, 1.00 mm thick for kitchen or laboratory with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc overall approx size 915 mm x 460mm X 200 mm with approx bowl size of 410 mm x 355mm x 200 mm etc.
View PDF · p. 62
33Stainless Steel Sinks For Domestic Purposes (V3) As Per IS 13983Quantity1 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Confirmity to standard IS 13983 and ISI Marked
Yes
Type of Bowl
Rectangular
Type of Sink built in counter shall be as per clause 4 Of IS 13983
Double bowl without drainer
Material used stainless steel of Grade Designation used as per clause 5 of IS 13983
SS 304 Or higher
Sinks shall be provided, in one of the following conditions as per clause 7.5 of IS 13983
Without tap holes
Sinks shall be provided without an overflow hole or with an overflow hole as per clause 7.6 of IS 13983
Without an overflow hole
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove confirmity to specification
Yes
Test Report to be furnished to the buyer on demand
Yes
SS Kitchen Sink Double Bowl Overall size 37"x18"x09" with 02mm thick bowl size 16"x14"x09"
SS Kitchen Sink Double Bowl Overall size 37"x18"x09" with 02mm thick bowl size 16"x14"x09"
View PDF · p. 63
34Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity6 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Governing Specification
Conforming to IS 8931
Item
Type 2 Bib tap
Dimension
As per table 4 of the governing specification
Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
15
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Material of body, body components, nozzle , bonnet and back nuts
Cast brass
Material of inlet tubes
Brass tubes
Material of flanges
Cast brass
Material of diverter and diverter components
NA
Material of spindle, glands, washer plate, nuts, screw and pin
Forged brass
Material of circlip, wire locks
Phosphor bronze sheet
Material of 'O' ring , gasket, and seat washer
Neoprene rubber
Material of Knob and knob components
Cast brass
Aerating device fitted with tap
No
Flow straightening device fitted with tap
No
Warranty (in months)
12
Two way bib cock, 15 mm dia with wall flange made of cast copper alloy, chromium plated
Two way bib cock, 15 mm dia with wall flange made of cast copper alloy, chromium plated.
View PDF · p. 64
35Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming To IS 778Quantity33 piecesDelivery45 daysDetailsClose
Delivery locations · 2
Delivery locationQuantityDelivery
***********South West delhi30 pieces45 days
***********South West delhi3 pieces45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Conformity to IS 778
Yes
End Connection
Screwed Ends
Nominal Size of Valves (in mm)
15 mm
Pressure Classification
Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa
Gate Valve Type
Solid Wedge Type
Bonnet Type/Design
Screwed - in bonnet integral seats
Material of Body
Brass (conforming to DCB 2 of IS 1264)
Material of Bonnet/Cover Material
Forged brass (conforming to CuZn,2Pb2 of IS 3288)
Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable
Extruded Brass Rod (conforming to Type 1 or Type 2 (Half Hard) of IS 319)
Material of Stem, hinge pin and plug
Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
Material of Gland Packing
Hemp and Jute (conforming to IS 5414)
Minimum Length of Threaded Portion at the end (in mm)
9.5 mm
Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)
3.7 mm
Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)
11.5 mm
Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)
8 mm
Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)
26 mm
End to End Dimensions of Screwed End Valves (in mm)
As per Table 9 of IS 778
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Face to Face Dimensions of Flanged Valves (in mm)
As per Table 11 of IS 778
View PDF · p. 66
36Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming To IS 778Quantity25 piecesDelivery45 daysDetailsClose
Delivery locations · 2
Delivery locationQuantityDelivery
***********South West delhi21 pieces45 days
***********South West delhi4 pieces45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Conformity to IS 778
Yes
End Connection
Screwed Ends
Nominal Size of Valves (in mm)
20 mm
Pressure Classification
Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa
Gate Valve Type
Solid Wedge Type
Bonnet Type/Design
Screwed - in bonnet integral seats
Material of Body
Brass (conforming to DCB 2 of IS 1264)
Material of Bonnet/Cover Material
Brass (conforming to DCB 2 of IS 1264)
Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable
Extruded Brass Rod (conforming to Type 1 or Type 2 (Half Hard) of IS 319)
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Material of Stem, hinge pin and plug
Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
Material of Gland Packing
Hemp and Jute (conforming to IS 5414)
Minimum Length of Threaded Portion at the end (in mm)
10.5 mm
Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)
4.1 mm
Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)
13.0 mm
Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)
9 mm
Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)
32 mm
End to End Dimensions of Screwed End Valves (in mm)
As per Table 9 of IS 778
Face to Face Dimensions of Flanged Valves (in mm)
As per Table 11 of IS 778
View PDF · p. 67
37Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming To IS 778Quantity10 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Conformity to IS 778
Yes
End Connection
Screwed Ends
Nominal Size of Valves (in mm)
15 mm
Pressure Classification
Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa
Gate Valve Type
Solid Wedge Type
Bonnet Type/Design
Screwed - in bonnet integral seats
Material of Body
Brass (conforming to DCB 2 of IS 1264)
Material of Bonnet/Cover Material
Forged brass (conforming to CuZn,2Pb2 of IS 3288)
Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable
Extruded Brass Rod (conforming to Type 1 or Type 2 (Half Hard) of IS 319)
Material of Stem, hinge pin and plug
Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
Material of Gland Packing
Hemp and Jute (conforming to IS 5414)
Minimum Length of Threaded Portion at the end (in mm)
9.5 mm
Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)
3.7 mm
Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)
11.5 mm
Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)
8 mm
Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)
26 mm
End to End Dimensions of Screwed End Valves (in mm)
As per Table 9 of IS 778
Face to Face Dimensions of Flanged Valves (in mm)
As per Table 11 of IS 778
Brass Non return valve, 15mm bore
Brass Non return valve, 15mm bore.
View PDF · p. 68
38Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming To IS 778Quantity5 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Conformity to IS 778
Yes
End Connection
Screwed Ends
Nominal Size of Valves (in mm)
20 mm
Pressure Classification
Class 2 Valve : Suitable for cold working pressure up to 1.6 MPa
Gate Valve Type
Solid Wedge Type
Bonnet Type/Design
Screwed - in bonnet integral seats
Material of Body
Brass (conforming to DCB 2 of IS 1264)
Material of Bonnet/Cover Material
Brass (conforming to DCB 2 of IS 1264)
Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable
Brass (conforming to DCB 2 of IS 1264)
Material of Stem, hinge pin and plug
Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Material of Gland Packing
Asbestos (conforming to 4687)
Minimum Length of Threaded Portion at the end (in mm)
10.5 mm
Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)
4.1 mm
Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)
13.0 mm
Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)
9 mm
Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)
32 mm
End to End Dimensions of Screwed End Valves (in mm)
As per Table 9 of IS 778
Face to Face Dimensions of Flanged Valves (in mm)
NA for Screwed Valves
Brass Non return valve, 20mm bore
Brass Non return valve, 20mm bore.
View PDF · p. 70
39Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming To IS 778Quantity13 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Conformity to IS 778
Yes
End Connection
Screwed Ends
Nominal Size of Valves (in mm)
25 mm
Pressure Classification
Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa
Gate Valve Type
Solid Wedge Type
Bonnet Type/Design
Screwed - in bonnet integral seats
Material of Body
Brass (conforming to DCB 2 of IS 1264)
Material of Bonnet/Cover Material
Brass (conforming to DCB 2 of IS 1264)
Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable
Extruded Brass Rod (conforming to Type 1 or Type 2 (Half Hard) of IS 319)
Material of Stem, hinge pin and plug
Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
Material of Gland Packing
Hemp and Jute (conforming to IS 5414)
Minimum Length of Threaded Portion at the end (in mm)
12.0 mm
Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)
4.6 mm
Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)
13.0 mm
Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)
10 mm
Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)
39 mm
End to End Dimensions of Screwed End Valves (in mm)
As per Table 9 of IS 778
Face to Face Dimensions of Flanged Valves (in mm)
As per Table 11 of IS 778
Brass Non return valve, 25mm bore
Brass Non return valve, 25mm bore.
View PDF · p. 72
40Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming To IS 778Quantity17 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Conformity to IS 778
Yes
End Connection
Screwed Ends
Nominal Size of Valves (in mm)
25 mm
Pressure Classification
Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa
Gate Valve Type
Solid Wedge Type
Bonnet Type/Design
Screwed - in bonnet integral seats
Material of Body
Brass (conforming to DCB 2 of IS 1264)
Material of Bonnet/Cover Material
Brass (conforming to DCB 2 of IS 1264)
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable
Extruded Brass Rod (conforming to Type 1 or Type 2 (Half Hard) of IS 319)
Material of Stem, hinge pin and plug
Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
Material of Gland Packing
Hemp and Jute (conforming to IS 5414)
Minimum Length of
12.0 mm
Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)
4.6 mm
Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)
13.0 mm
Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)
10 mm
Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)
39 mm
End to End Dimensions of Screwed End Valves (in mm)
As per Table 9 of IS 778
Face to Face Dimensions of Flanged Valves (in mm)
As per Table 11 of IS 778
View PDF · p. 73
41PLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES Conforming To IS 9763Quantity88 piecesDelivery45 daysDetailsClose
Delivery locations · 2
Delivery locationQuantityDelivery
***********South West delhi23 pieces45 days
***********South West delhi65 pieces45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Conformity to IS 9763
Yes
Product Type
Pillar Tap
Nominal Size (in mm)
15 mm (1/2")
Hot/Cold Identification of Control Devices
Blue Color or Letter C for Cold Water
Material of Body of Tap/Valve
PVC (conforming to 9766)
Material of Bonnet of Tap/Valve
ABS
Material of Spindle of Tap/Valve
ABS
Material of Handle of Tap/Valve
ABS
Material of Seal of Tap/Valve
Rubber
Dimensions (in mm)
Pillar Taps (As per Table 4 of IS 9763)
View PDF · p. 75
42PLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES Conforming To IS 9763Quantity33 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Conformity to IS 9763
Yes
Product Type
Angle Valve
Nominal Size (in mm)
15 mm (1/2")
Hot/Cold Identification of Control Devices
Blue Color or Letter C for Cold Water
Material of Body of Tap/Valve
Nylon 66 (conforming to 13464)
Material of Bonnet of Tap/Valve
PP Copolymer (conforming to IS 10910)
Material of Spindle of Tap/Valve
PBT (conforming to IS 13193)
Material of Handle of Tap/Valve
PP Copolymer (conforming to IS 10910)
Material of Seal of Tap/Valve
Thermoplastic Polyester based Elastomaster
Dimensions (in mm)
Angle Valves (As per Table 6 of IS 9763)
View PDF · p. 75
43PLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES Conforming To IS 9763Quantity72 piecesDelivery45 daysDetailsClose
Delivery locations · 3
Delivery locationQuantityDelivery
***********South West delhi42 pieces45 days
***********South West delhi3 pieces45 days
***********South West delhi27 pieces45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Conformity to IS 9763
Yes
Product Type
Stop Valve
Nominal Size (in mm)
15 mm (1/2")
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Hot/Cold Identification of Control Devices
Blue Color or Letter C for Cold Water
Material of Body of Tap/Valve
PBT (conforming to IS 13193)
Material of Bonnet of Tap/Valve
PBT (conforming to IS 13193)
Material of Spindle of Tap/Valve
PBT (conforming to IS 13193)
Material of Handle of Tap/Valve
PBT (conforming to IS 13193)
Material of Seal of Tap/Valve
Rubber
Dimensions (in mm)
Stop Valves (As per Table 5 of IS 9763)
View PDF · p. 76
44PLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES Conforming To IS 9763Quantity13 piecesDelivery45 daysDetailsClose
Delivery locations · 2
Delivery locationQuantityDelivery
***********South West delhi7 pieces45 days
***********South West delhi6 pieces45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Conformity to IS 9763
Yes
Product Type
Stop Valve
Nominal Size (in mm)
20 mm (3/4")
Specification
/Bid Requirement
Hot/Cold Identification of Control Devices
Blue Color or Letter C for Cold Water
Material of Body of Tap/Valve
ABS
Material of Bonnet of Tap/Valve
ABS
Material of Spindle of Tap/Valve
ABS
Material of Handle of Tap/Valve
ABS-PC Alloy
Material of Seal of Tap/Valve
Rubber
Dimensions (in mm)
Stop Valves (As per Table 5 of IS 9763)
View PDF · p. 77
45PLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES Conforming To IS 9763Quantity340 piecesDelivery45 daysDetailsClose
Delivery locations · 3
Delivery locationQuantityDelivery
***********South West delhi87 pieces45 days
***********South West delhi32 pieces45 days
***********South West delhi221 pieces45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Conformity to IS 9763
Yes
Product Type
Plastic Bib Tap
Nominal Size (in mm)
15 mm (1/2")
Hot/Cold Identification of Control Devices
Blue Color or Letter C for Cold Water
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Material of Body of Tap/Valve
PVC (conforming to 9766)
Material of Bonnet of Tap/Valve
PBT (conforming to IS 13193)
Material of Spindle of Tap/Valve
ABS
Material of Handle of Tap/Valve
ABS
Material of Seal of Tap/Valve
Rubber
Dimensions (in mm)
Bib Taps (As per Table 3 of IS 9763)
View PDF · p. 78
46PLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES Conforming To IS 9763Quantity138 piecesDelivery45 daysDetailsClose
Delivery locations · 2
Delivery locationQuantityDelivery
***********South West delhi41 pieces45 days
***********South West delhi97 pieces45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Conformity to IS 9763
Yes
Product Type
Plastic Bib Tap
Nominal Size (in mm)
15 mm (1/2")
Hot/Cold Identification of Control Devices
Blue Color or Letter C for Cold Water
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Material of Body of Tap/Valve
PVC (conforming to 9766)
Material of Bonnet of Tap/Valve
PP Copolymer (conforming to IS 10910)
Material of Spindle of Tap/Valve
PBT (conforming to IS 13193)
Material of Handle of Tap/Valve
PBT (conforming to IS 13193)
Material of Seal of Tap/Valve
Rubber
Dimensions (in mm)
Bib Taps (As per Table 3 of IS 9763)
PTMT Bib Cock 15 mm Long Body
PTMT Bib Cock 15 mm Long Body
View PDF · p. 79
47Waste Fittings For Washbasin And Sinks As Per IS 2963Quantity89 piecesDelivery45 daysDetailsClose
Delivery locations · 3
Delivery locationQuantityDelivery
***********South West delhi22 pieces45 days
***********South West delhi16 pieces45 days
***********South West delhi51 pieces45 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Material of Waste Fitting
Brass conforming to Grade 3 of IS 292/1961
Nominal Size
32 mm for washbasin
WARANTEE PERIOD IN NUMBER OF YEARS
1
View PDF · p. 80
48Waste Fittings For Washbasin And Sinks As Per IS 2963Quantity4 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Material of Waste Fitting
Brass conforming to Grade 3 of IS 292/1961
Nominal Size
50 mm for sink
WARANTEE PERIOD IN NUMBER OF YEARS
3
View PDF · p. 81
49Connector Pipes For Washbasins/ Sinks/ GeyserQuantity198 piecesDelivery45 daysDetailsClose
Delivery locations · 3
Delivery locationQuantityDelivery
***********South West delhi78 pieces45 days
***********South West delhi13 pieces45 days
***********South West delhi107 pieces45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Inner Pipe Material
Silicone Rubber, PVC
Cover Material
PVC Outer Cover
Nominal Bore Size (in mm)
12 mm
End Connection Size (in inch)
½ inch,, ¾ inch, ? inch
Pipe Length (Tolerance: ±10 mm)
450 mm
End Connection Type (Material to be supplied alonwith)
Nut–Nut
End Fitting Material
PVC (Polyvinyl Chloride)
Surface Finish
None
Washer/Gasket Included
Yes
Maximum Working Pressure (in bar)
Up to 10 bar
Operating Temperature Range (in °C)
Up to 40°C
Durability Grade
Light Duty
View PDF · p. 82
50Connector Pipes For Washbasins/ Sinks/ GeyserQuantity280 piecesDelivery45 daysDetailsClose
Delivery locations · 3
Delivery locationQuantityDelivery
***********South West delhi33 pieces45 days
***********South West delhi10 pieces45 days
***********South West delhi237 pieces45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Inner Pipe Material
Silicone Rubber, PVC
Cover Material
PVC Outer Cover
Nominal Bore Size (in mm)
12 mm
End Connection Size (in inch)
½ inch,, ¾ inch, ? inch
Pipe Length (Tolerance: ±10 mm)
600 mm
End Connection Type (Material to be supplied alonwith)
Nut–Nut
End Fitting Material
PVC (Polyvinyl Chloride)
Surface Finish
None
Washer/Gasket Included
Yes
Maximum Working Pressure (in bar)
Up to 10 bar
Operating Temperature Range (in °C)
Up to 40°C
Durability Grade
Light Duty
View PDF · p. 83
51Connector Pipes For Washbasins/ Sinks/ GeyserQuantity31 piecesDelivery45 daysDetailsClose
Delivery locations · 2
Delivery locationQuantityDelivery
***********South West delhi26 pieces45 days
***********South West delhi5 pieces45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Inner Pipe Material
Stainless Steel (Corrugated)
Cover Material
Stainless Steel Braided (SS 304)
Nominal Bore Size (in mm)
12 mm
End Connection Size (in inch)
½ inch,, ¾ inch, ? inch
Pipe Length (Tolerance: ±10 mm)
450 mm
End Connection Type (Material to be supplied alonwith)
Nut–Nut
End Fitting Material
Stainless Steel
Surface Finish
Chrome Plated
Washer/Gasket Included
No
Maximum Working Pressure (in bar)
10–20 bar
Operating Temperature Range (in °C)
40–70°C
Durability Grade
Medium Duty
View PDF · p. 83
52Connector Pipes For Washbasins/ Sinks/ GeyserQuantity14 piecesDelivery45 daysDetailsClose
Delivery locations · 2
Delivery locationQuantityDelivery
***********South West delhi13 pieces45 days
***********South West delhi1 pieces45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Inner Pipe Material
Stainless Steel (Corrugated)
Cover Material
Stainless Steel Braided (SS 304)
Nominal Bore Size (in mm)
12 mm
End Connection Size (in inch)
½ inch,, ¾ inch, ? inch
Pipe Length (Tolerance: ±10 mm)
450 mm
End Connection Type (Material to be supplied alonwith)
Nut–Nut
End Fitting Material
Brass
Surface Finish
Nickel Plated
Washer/Gasket Included
Yes
Maximum Working Pressure (in bar)
Up to 10 bar
Operating Temperature Range (in °C)
Above 70°C
Durability Grade
Medium Duty
View PDF · p. 84
53Connector Pipes For Washbasins/ Sinks/ GeyserQuantity12 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Inner Pipe Material
Stainless Steel (Corrugated)
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Cover Material
Stainless Steel Braided (SS 304)
Nominal Bore Size (in mm)
12 mm
End Connection Size (in inch)
½ inch,, ¾ inch, ? inch
Pipe Length (Tolerance: ±10 mm)
600 mm
End Connection Type (Material to be supplied alonwith)
Nut with Nipple
End Fitting Material
Brass
Surface Finish
Nickel Plated
Washer/Gasket Included
Yes
Maximum Working Pressure (in bar)
Up to 10 bar
Operating Temperature Range (in °C)
Up to 40°C
Durability Grade
Medium Duty
View PDF · p. 85
54Plastic Seats And Covers For Water - Closets As Per IS 2548Quantity158 piecesDelivery45 daysDetailsClose
Delivery locations · 3
Delivery locationQuantityDelivery
***********South West delhi29 pieces45 days
***********South West delhi6 pieces45 days
***********South West delhi123 pieces45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Materials of Seat and Covers
Polypropylene
Materials of Hinging Device
Aluminium alloy with anodic coating
Seat
Grade 1
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Cover
Grade 1
View PDF · p. 86
55Plastic Seats And Covers For Water - Closets As Per IS 2548Quantity4 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Bis Required
Yes
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Materials of Seat and Covers
Polypropylene
Materials of Hinging Device
Aluminium alloy with anodic coating
Seat
Grade 1
Cover
Grade 2
Toilet Seat Cover White Anglo Indian Type
Toilet Seat Cover White Anglo Indian Type
View PDF · p. 87
56Flexible Drain Hoses For Wash Basins/ SinksQuantity74 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Installation Type
Slip-on
Hose Material
PVC
Reinforcement Type
Unreinforced
Flexibility Type
Corrugated
Colour
White
Nominal Bore of Hose (in mm)
32 mm
Hose Length in meter (Tolerance : ± 10 mm)
1 meter
Wall Thickness (in mm)
1.5 mm
Durability Grade
Light Duty
Connection Fitting Included
Yes
Type of Connection Fitting
Coupling Nut with Washer
Fitting Material
PVC
Washer/Gasket Material
Rubber
View PDF · p. 88
57Flexible Drain Hoses For Wash Basins/ SinksQuantity77 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Installation Type
Threaded
Hose Material
PVC
Reinforcement Type
Unreinforced
Flexibility Type
Smooth Bore
Colour
White
Nominal Bore of Hose (in mm)
40 mm
Hose Length in meter (Tolerance : ± 10 mm)
1 meter
Wall Thickness (in mm)
2 mm
Durability Grade
Medium Duty
Connection Fitting Included
Yes
Type of Connection Fitting
Coupling Nut with Washer
Fitting Material
PVC
Washer/Gasket Material
Rubber
View PDF · p. 89
58Flexible Drain Hoses For Wash Basins/ SinksQuantity416 piecesDelivery45 daysDetailsClose
Delivery locations · 3
Delivery locationQuantityDelivery
***********South West delhi201 pieces45 days
***********South West delhi29 pieces45 days
***********South West delhi186 pieces45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Installation Type
Threaded
Hose Material
PVC
Reinforcement Type
Unreinforced
Flexibility Type
Corrugated
Colour
White
Nominal Bore of Hose (in mm)
32 mm
Hose Length in meter (Tolerance : ± 10 mm)
1 meter
Wall Thickness (in mm)
1 mm
Durability Grade
Medium Duty
Connection Fitting Included
Yes
Type of Connection Fitting
Threaded Adapter
Fitting Material
PVC
Washer/Gasket Material
Rubber
View PDF · p. 90
59Towel RingQuantity85 piecesDelivery45 daysDetailsClose
Delivery locations · 3
Delivery locationQuantityDelivery
***********South West delhi7 pieces45 days
***********South West delhi19 pieces45 days
***********South West delhi59 pieces45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Ring Shape
Circular
Ring Material
Brass
Mounting Bracket Material
Brass
Inner Diameter of Ring (in mm) (Tolerance : ± 10 mm)
200 mm
Ring Rod Thickness (in mm) (Tolerance : ± 10 mm)
8 mm
Projection from Wall (in mm) (Tolerance : ± 10 mm)
75 mm
Mounting Plate Size (in mm)
40 mm
Ring Movement Type
Fixed Ring
Recommended Load Capacity (in kg)
2–5 kg
Fixing Hardware Included
Yes
Fasteners Material
Stainless Steel
View PDF · p. 91
60Bathroom Water Shower (V2)Quantity51 piecesDelivery45 daysDetailsClose
Delivery locations · 2
Delivery locationQuantityDelivery
***********South West delhi14 pieces45 days
***********South West delhi37 pieces45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Type of shower
Overhead shower (Wall mount with shower arm)
Material of body/face plate
ABS
Finish of face plate
Chrome plated
Type of Water Flow
Rainfall and Multiple flow
Type of Multiple flow
Rainflow
Shape of Shower
Square
Size of Shower
150 mm
Overall length of Hand Shower (in mm)
NA
Length of Hand Shower Tube (in mt)
NA
Diameter of Hand Shower Tube (in mm)
NA
Material of Hand Shower Tube
NA
Overall length of Shower Arm (in mm)
300
Warranty (in Years)
1
View PDF · p. 91
61Bathroom Water Shower (V2)Quantity9 piecesDelivery44 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
44 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Type of shower
Overhead shower (Wall mount with shower arm)
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Material of body/face plate
Brass
Finish of face plate
Chrome plated
Type of Water Flow
Only Rainfall
Type of Multiple flow
NA
Shape of Shower
Square
Size of Shower
100 mm
Overall length of Hand Shower (in mm)
NA
Length of Hand Shower Tube (in mt)
NA
Diameter of Hand Shower Tube (in mm)
NA
Material of Hand Shower Tube
NA
Overall length of Shower Arm (in mm)
300
Warranty (in Years)
1
View PDF · p. 92
62Bathroom Water Shower (V2)Quantity10 piecesDelivery45 daysDetailsClose
Delivery locations · 2
Delivery locationQuantityDelivery
***********South West delhi6 pieces45 days
***********South West delhi4 pieces45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Type of shower
Overhead shower (Wall mount with shower arm)
Material of body/face plate
ABS
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Finish of face plate
Chrome plated
Type of Water Flow
Rainfall and Multiple flow
Type of Multiple flow
Rainflow, Rainstream
Shape of Shower
Square
Size of Shower
100 mm
Overall length of Hand Shower (in mm)
NA
Length of Hand Shower Tube (in mt)
NA
Diameter of Hand Shower Tube (in mm)
NA
Material of Hand Shower Tube
NA
Overall length of Shower Arm (in mm)
280
Warranty (in Years)
1
View PDF · p. 93
63Bathroom Water Shower (V2)Quantity15 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Type of shower
Overhead shower (Wall mount with shower arm)
Material of body/face plate
ABS
Finish of face plate
Chrome plated
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Type of Water Flow
Only Rainfall
Type of Multiple flow
NA
Shape of Shower
Round
Size of Shower
120 mm
Overall length of Hand Shower (in mm)
NA
Length of Hand Shower Tube (in mt)
NA
Diameter of Hand Shower Tube (in mm)
NA
Material of Hand Shower Tube
NA
Overall length of Shower Arm (in mm)
300
Warranty (in Years)
1
View PDF · p. 94
64Bathroom Water Shower (V2)Quantity6 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Type of shower
Hand Shower
Material of body/face plate
Brass
Finish of face plate
Chrome plated
Type of Water Flow
Only Rainfall
Type of Multiple flow
NA
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Shape of Shower
Round
Size of Shower
75 mm
Overall length of Hand Shower (in mm)
200
Length of Hand Shower Tube (in mt)
1.5
Diameter of Hand Shower Tube (in mm)
12
Material of Hand Shower Tube
Stainless Steel
Overall length of Shower Arm (in mm)
NA
Warranty (in Years)
2
View PDF · p. 95
65Bathroom Water Shower (V2)Quantity14 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Type of shower
Hand Shower
Material of body/face plate
ABS
Finish of face plate
Chrome plated
Type of Water Flow
Rainfall and Multiple flow
Type of Multiple flow
Massage, Cascade, Mist, Whirl, Monorail, Rainflow, Rainstream
Shape of Shower
Round
Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Size of Shower
100 mm
Overall length of Hand
200
Length of Hand Shower Tube (in mt)
1.5
Diameter of Hand Shower Tube (in mm)
12
Material of Hand Shower Tube
Stainless Steel
Overall length of Shower Arm (in mm)
NA
Warranty (in Years)
1
View PDF · p. 96
66Health FaucetQuantity144 piecesDelivery45 daysDetailsClose
Delivery locations · 3
Delivery locationQuantityDelivery
***********South West delhi15 pieces45 days
***********South West delhi25 pieces45 days
***********South West delhi104 pieces45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Pressure rating (Bar)
1.5
Flow Rate , Minimum (lpm)
10, 11 Or higher
Material of construction
Brass
Hose Material
Stainless Steel
Hose length ( in meters)
1.5
Handle Type
Lever
Anti bacterial coating
Yes
View PDF · p. 97
67Towel RailQuantity34 piecesDelivery45 daysDetailsClose
Delivery locations · 2
Delivery locationQuantityDelivery
***********South West delhi6 pieces45 days
***********South West delhi28 pieces45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Rail Material
Stainless Steel (SS 304)
Mounting Bracket Material
Stainless Steel (SS 304)
Towel Rail Length (in mm) (Tolerance : ± 10 mm)
600 mm
Rail Diameter/Thickness (in mm) (Tolerance : ± 10 mm)
22 mm
Projection from Wall (in mm) (Tolerance : ± 10 mm)
80 mm
Towel Rail Type
Single Bar
Bar Shape of Rail
Round
Recommended Load Capacity (in kg)
3–6 kg
Fixing Hardware Included
Yes
Fasteners Material
Stainless Steel
View PDF · p. 98
68Towel RailQuantity16 piecesDelivery45 daysDetailsClose
Delivery locations · 2
Delivery locationQuantityDelivery
***********South West delhi10 pieces45 days
***********South West delhi6 pieces45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Rail Material
Brass
Mounting Bracket Material
Brass
Towel Rail Length (in mm) (Tolerance : ± 10 mm)
600 mm
Rail Diameter/Thickness (in mm) (Tolerance : ± 10 mm)
19 mm
Projection from Wall (in mm) (Tolerance : ± 10 mm)
60 mm
Towel Rail Type
Single Bar
Bar Shape of Rail
Flat
Recommended Load Capacity (in kg)
3–6 kg
Fixing Hardware Included
Yes
Fasteners Material
Stainless Steel
View PDF · p. 99
69Towel RailQuantity15 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Rail Material
Brass
Mounting Bracket Material
Brass
Towel Rail Length (in mm) (Tolerance : ± 10 mm)
450 mm
Rail Diameter/Thickness (in mm) (Tolerance : ± 10 mm)
19 mm
Projection from Wall (in mm) (Tolerance : ± 10 mm)
60 mm
Towel Rail Type
Single Bar
Bar Shape of Rail
Flat
Recommended Load Capacity (in kg)
3–6 kg
Fixing Hardware Included
Yes
Fasteners Material
Stainless Steel
View PDF · p. 100
70Towel RailQuantity12 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Rail Material
Brass
Mounting Bracket Material
Brass
Towel Rail Length (in mm) (Tolerance : ± 10 mm)
750 mm
Rail Diameter/Thickness (in mm) (Tolerance : ± 10 mm)
19 mm
Projection from Wall (in mm) (Tolerance : ± 10 mm)
60 mm
Towel Rail Type
Single Bar
Bar Shape of Rail
Round
Recommended Load Capacity (in kg)
3–6 kg
Fixing Hardware Included
Yes
Fasteners Material
Stainless Steel
View PDF · p. 100
71Towel RailQuantity37 piecesDelivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Rail Material
PVC Plastic
Mounting Bracket Material
ABS Plastic
Towel Rail Length (in mm) (Tolerance : ± 10 mm)
600 mm
Specification
बड के िलए आवVयक अनुमत मू\य /Bid Requirement
Name
(Allowed Values)
Rail Diameter/Thickness (in mm) (Tolerance : ± 10 mm)
19 mm
Projection from Wall (in mm) (Tolerance : ± 10 mm)
60 mm
Towel Rail Type
Single Bar
Bar Shape of Rail
Round
Recommended Load Capacity (in kg)
Up to 3 kg
Fixing Hardware Included
No
Fasteners Material
Plastic
View PDF · p. 101
72Soap Dish - CaseQuantity129 piecesDelivery45 daysDetailsClose
Delivery locations · 3
Delivery locationQuantityDelivery
***********South West delhi17 pieces45 days
***********South West delhi24 pieces45 days
***********South West delhi88 pieces45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Material of the box
Stainless Steel
Type of Lid
NOT APPLICABLE
Lid type (according to fixation)
WITHOUT LID
View PDF · p. 102
73Rotational Moulded Polyethylene Water Storage Tanks (V3) Conforming To IS 12701Quantity15 piecesDelivery45 daysDetailsClose
Delivery locations · 3
Delivery locationQuantityDelivery
***********South West delhi3 pieces45 days
***********South West delhi5 pieces45 days
***********South West delhi7 pieces45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Type (Based on Shape of Tank)
Cylindrical Vertical Tank with Lid
Layer of Tank
Double Layered
Minimum Net Capacity (In Liter)
500 Liter
Rotational three layered , white colour moulded polythy water storage tank 500 Ltr
Rotational three layered , white colour moulded polythy water storage tank 500 Ltr
View PDF · p. 103
74Rotational Moulded Polyethylene Water Storage Tanks (V3) Conforming To IS 12701Quantity14 piecesDelivery45 daysDetailsClose
Delivery locations · 3
Delivery locationQuantityDelivery
***********South West delhi4 pieces45 days
***********South West delhi3 pieces45 days
***********South West delhi7 pieces45 days

Specifications & requirements

Specification Name
बड के िलए आवVयक अनुमत मू\य /Bid Requirement (Allowed Values)
Type (Based on Shape of Tank)
Cylindrical Vertical Tank with Lid
Layer of Tank
Double Layered
Minimum Net Capacity (In Liter)
1000 Liter
Rotational three layered , white colour moulded polythylen water storage tank 1000 Ltr
Rotational three layered , white colour moulded polythylen water storage tank 1000 Ltr
View PDF · p. 104
75SWR Pipe Type A Length 06 Feet 110 Mm Dia , UPVC TypeQuantity1Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 104
76SWR Pipe Type A Length 06 Feet 75 Mm Dia , UPVC TypeQuantity1Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 105
77WC Orissa Pattern Toilet SeatQuantity2Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 105
78GI Nipple 25 Mm X 125 MmQuantity3Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 106
79CP Brass Bib Cock 20 Mm Long Body Confirming To IS 8931Quantity4Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 106
80CP Brass Bib Cock 20 Mm Short Body Confirming To IS 8931-1993Quantity4Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 107
81PTMT Float Valve 25 Mm With Ball And Brass RodQuantity4Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 107
82Mortice Lock 65mm 4 Lever SSQuantity5Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 108
83Toilet Seat Orrisa Pattern White Of Size 580x440Quantity5Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 108
84PTMT Grating Jali Round 140 MmQuantity7Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 109
85Plate Rack S S Size 24 Inch X24 Inch X10 InchQuantity7Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 109
86GI Tee 25 MmQuantity7Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 110
87Piano Type Hings SS 6 FeetQuantity8Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 110
88Galvanised MS Wire Cloth 0.56mm 3 Feet X 4 Feet Wide And 15 Mtr LongQuantity9Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 111
89Plate Rack S S Size 30 Inch X36 Inch X10 InchQuantity11Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 111
90Stainless Steel Grating Round 5 Inch Without HoleQuantity11Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 112
91Mirror Cabinet 622mmX422mm With Sliding MirrorQuantity12Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 112
92Mirror Cabinet 350mmX500mm With Screw And GittiQuantity13Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 113
93Stainless Steel Butt Hinges Size 125 MmQuantity13Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 113
94GI Nipple 25 Mm X 100 MmQuantity13Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 114
95GI Nipple 25 Mm X 150 MmQuantity14Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 114
96MS End Plug 25 MmQuantity15Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 115
97European Type EWC S Type And P TrapQuantity18Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 115
98Hydraulic Door Closer Universal TypeQuantity19Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 116
99PTMT Float Valve 20 Mm With Ball And Brass RodQuantity19Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 116
100MS End Plug 20 MmQuantity20Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 117
101GI Nipple 20 Mm X 75 MmQuantity21Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 117
102GI Socket 25 MmQuantity22Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 118
103GI Elbow 25 MmQuantity23Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 118
104SS Shower Rose 15 Mm, 125 MM SquareQuantity24Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 119
105PTMT Grating Round Jali 125 Mm With HoleQuantity25Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 119
106Teflon Tape 19 MmQuantity25Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 120
107Stainless Steel Butt Hinges Size 75 MmQuantity26Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 120
108CP Brass Waste Coupling 40 MmQuantity27Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 121
109Wash Basin White 550mm X 400 MmQuantity27Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 121
110GI Union 25 MmQuantity27Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 122
111PTMT Waste Coupling 40 MmQuantity28Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 122
112GI Pipe Medium Grade 25 Mm With SocketQuantity28Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 123
113PTMT Bib Cock 20 Mm Short BodyQuantity31Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 123
114Glass Shelf 500mmX 125mm With Brass Bracket, Screw And GittiQuantity31Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 124
115M SealQuantity31Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 124
116PVC Internal Fitting For Low Level Cistern , Dual Action With Push ButtonsQuantity32Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 125
117GI Nipple 15 Mm X 100 MmQuantity32Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 125
118GI Union 20 MmQuantity32Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 126
119Sliding Door Bolt S S 250 MmQuantity33Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 126
120GI Nipple 20 Mm X 125 MmQuantity33Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 127
121GI Nipple 20 Mm X 150 MmQuantity33Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 127
122MS End Plug 15 MmQuantity34Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 128
123CP Brass Bottle Trap 32 MmQuantity35Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 128
124CP Brass Toilet Paper HolderQuantity37Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 129
125Flushing Cistern 10 Ltrs CapacityQuantity38Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 129
126GI Nipple 15 Mm X 150 MmQuantity40Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 130
127Corner Glass Shelf 300 Mm , 6 Mm Thick Toughened Glass, SS Railing And CP Brass BracketQuantity42Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 130
128Nail Off SizeQuantity42Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 131
129Glass Sheet Plane Size 1200x900x4MMQuantity44Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 131
130PVC Or HDPE Water Tank Cover For 1000 Ltr CapQuantity44Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 132
131PTMT Float Valve 15 Mm With Ball And Brass RodQuantity46Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 132
132Looking Mirror 600x450x4mm Beveled Edge , With 4 Plugs, Screw And GittiQuantity49Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 133
133GI Nipple 15 Mm X 125 MmQuantity53Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 133
134GI Nipple 20 Mm X 100 MmQuantity53Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 134
135Sliding Door Bolt Alumn 300 MmQuantity57Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 134
136GI Nipple 20 Mm X 50 MmQuantity59Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 135
137Sliding Door Bolt S S 300 MmQuantity63Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 135
138GI Nipple 15 Mm X 50 MmQuantity63Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 136
139Fevicol 1 Kg In PackQuantity64Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 136
140Sliding Door Bolt Alumn 250 MmQuantity64Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 137
141PTMT Waste Coupling 32 MmQuantity66Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 137
142Tower Bolt S S 150 MmQuantity66Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 138
143GI Pipe Medium Grade 20 Mm With SocketQuantity67Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 138
144Stainless Steel Grating Round 4 Inch Without HoleQuantity69Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 139
145CP Jet Spray With 1.00 Mtr TubeQuantity70Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 139
146GI Socket 20 MmQuantity70Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 140
147Stainless Steel Grating Round 4 Inch With HoleQuantity73Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 140
148Stainless Steel Butt Hinges Size 100 MmQuantity76Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 141
149Door Handle 200 Mm AluminumQuantity77Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 141
150Teflon Tape 12 MmQuantity77Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 142
151SS Door Handle 100 MmQuantity79Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 142
152GI Tee 20 MmQuantity80Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 143
153PTMT Bib Cock 20 Mm Long BodyQuantity81Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 143
154SS Door Handle 75 MmQuantity82Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 144
155Hasp And Staple Almn Anodised 75 MmQuantity85Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 144
156Spindle Brass For 15 Mm Bib CockQuantity88Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 145
157Spindle Brass For 20 Mm Bib CockQuantity88Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 145
158GI Nipple 15 Mm X 75 MmQuantity89Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 146
159GI Elbow 20 MmQuantity95Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 146
160Hasp And Staple Almn Anodised 100 MmQuantity96Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 147
161PVC Or HDPE Water Tank Cover For 500 Ltr Cap,Quantity97Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 147
162GI Pipe Medium Grade 15 Mm With SocketQuantity97Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 148
163Tower Bolt S S 125 MmQuantity98Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 148
164PTMT Grating Jali Round 125 MmQuantity105Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 149
165White Cement In 01 Kgs PackQuantity108Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 149
166GI Union 15 MmQuantity109Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 150
167GI Elbow 15 MmQuantity117Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 150
168Rubber Door Seal For Door Bottom 50x90cmQuantity124Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 151
169GI Socket 15 MmQuantity128Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 151
170GI Tee 15 MmQuantity148Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 152
171Door Handle 200 Mm SSQuantity151Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 152
172Curtain Rod 25mm Dia SS 3 Mm ThickQuantity152Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 153
173Door Stopper 100 Mm SSQuantity165Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 153
174M S Helical Door Spring 150mmQuantity170Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 154
175Finnel For Curtain Rod SSQuantity182Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 154
176Readymade Bituminous Path Hole PatchingQuantity208Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 155
177Bracket For Curtain Rod , SS With Screw And GittiQuantity235Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 155
178Cushion Size 21 Inch X 22 Inch X4 Inch 40 Density With Removable Chain CoverQuantity278Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 156
179Door Stopper 75 Mm AluminumQuantity289Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 156
180Ply Wood 8 Feet X 4 Feet X04 Mm Teak FaceQuantity320Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 157
181Knob 25mm , SS With Nut And ScrewQuantity599Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 157
182Glazed Oil PuttyQuantity627Delivery45 daysDetailsClose
Delivery location

***********South West delhi

GeM masks the full address in this document.
Delivery
45 days
View PDF · p. 158

Tender documents

Bid files and supporting documents, linked directly from GeM.

Policy & contract references

Documents you must submit

  • Experience Criteria
  • Past Performance
  • Bidder Turnover
  • Certificate (Requested in ATC)
  • Compliance of BoQ specification and supporting document

Eligibility

From the bid and reverse-auction documents

Experience

3 years

Min. turnover

₹30 L

a year, 3-year average

Past performance

50%

of the bid quantity

Experience & turnover exemptions

Micro & small enterprises (MSE)

Complete exemption
From the reverse auction
Exemption conditions

Yes | Complete

View PDF · p. 3

Startups

Complete exemption
From the reverse auction
Exemption conditions

Yes | Complete

View PDF · p. 3

Exemptions depend on the evidence and conditions specified in the bid.

Preferences & relaxations

From the bid document

  • MSE purchase preference
  • MII preference
  • Class-1/2 local suppliers
  • EMD exemption: no
  • Inspection required: no

Check each criterion against the tender notice before you bid.

Commercial conditions

From the bid document

EMD
₹180,000
Performance guarantee
5% for 12 months
Offer validity
90 days

Reverse auction extension

From the reverse auction

If any seller submits the offer price during last 30 minutes of RA end time, then RA will be automatically extended for next 30 minutes from the last participation time. There is no limit on such RA extension cycle.

View PDF · p. 2

Buyer requirements & conditions

Buyer-added conditions from the bid and the reverse-auction documents.

From the bid document

01

Generic

View PDF · p. 158

OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up to 25 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to increase the ordered quantity up to 25% of the contracted quantity during the currency of the contract at the contracted rates. The delivery period of quantity shall commence from the last date of original delivery order and in cases where option clause is exercised during the extended delivery period the additional time shall commence from the last date of extended delivery period. The additional delivery time shall be (Increased quantity ÷ Original quantity) × Original delivery period (in days), subject to minimum of 30 days. If the original delivery period is less than 30 days, the additional time equals the original delivery period. The Purchaser may extend this calculated delivery duration up to the original delivery period while exercising the option clause. Bidders must comply with these terms.

02

Generic

View PDF · p. 159

Manufacturer Authorization:Wherever Authorised Distributors/service providers are submitting the bid, Authorisation Form /Certificate with OEM/Original Service Provider details such as name, designation, address, e-mail Id and Phone No. required to be furnished along with the bid

03

Forms of EMD and PBG

View PDF · p. 159

Bidders can also submit the EMD with Banker’s Cheque in favour of HQ CWE New Delhi payable at Delhi Cantt . Bidder has to upload scanned copy / proof of the BC along with bid and has to ensure delivery of hardcopy to the Buyer within 5 days of Bid End date / Bid Opening date.

04

Forms of EMD and PBG

View PDF · p. 159

Successful Bidder can submit the Performance Security in the form of Account Payee Demand Draft also (besides PBG which is allowed as per GeM GTC). DD should be made in favour of GE South payable at Delhi Cantt . After award of contract, Successful Bidder can upload scanned copy of the DD in place of PBG and has to ensure delivery of hard copy to the original DD to the Buyer within 15 days of award of contract.

05

Scope of Supply

View PDF · p. 159

Scope of supply (Bid price to include all cost components) : Only supply of Goods

06

Warranty

View PDF · p. 159

Warranty period of the supplied products shall be 1 years from the date of final acceptance of goods or after completion of installation, commissioning & testing of goods (if included in the scope of supply), at consignee location. OEM Warranty certificates must be submitted by Successful Bidder at the time of delivery of Goods. The seller should guarantee the rectification of goods in case of any break down during the guarantee period. Seller should have well established Installation, Commissioning, Training, Troubleshooting and Maintenance Service group in INDIA for attending the after sales service. Details of Service Centres near consignee destinations are to be uploaded along with the bid.

07

Buyer Added Bid Specific ATC

View PDF · p. 159

Buyer Added text based ATC clauses

  • 1.Bidders are required to supply the material directly purchased from OEMs or their authorised dealers an d bidder has to submit purchase vouchers of all items at the time of delivery to the consignee.
  • 2.Bidders has to arrange inspection of all the items of supply order by OEMs or their marketing rep to the effect that items are genuine and purchased from OEMs or their authorised dealer.
  • 3.To claim the warranty of the products from the company, the L1 bidder will submit the warranty card dul y stamped by the company at the time of delivery of the goods.
  • 4.Undertaking certificate that the firm of bidder has not been blacklisted as on date in any govt departme nt.
  • 5.The bidder has to produce solvency certificate alongwith the bid for Rs 50 lakh. The certificate should be issued form a nationalized/ scheduled bank and its date of issue should not be more than 06 months old fr om the date of opening of bid. The solvency certificate should have the name, e mail address in bank dom ain name and contact Number of the issuing authority to verify the genuineness of the solvency certificate submitted.
  • 6.Prospective bidders shall quote for the makes/brands of Cera/Jaguar/Hindware/Parryware/Kohler for CP it ems, toilet seat cover , Cistern , PVC Connection, Waste pipe, Bottle trap, waste coupling, washbasin, EW C , Orrisa pan, Make for PTMT items Prayag/Shakti/Prima/Silver shine, Make for GI pipe and fittings Jindal/TA TA/Oswal/Unik, Make for door handles , tower bolt, Lock & sliding bolt Prayag/Crown/Classic, Makes for kitc hen sinks, Glass shelfs and plate racks Prayag/Shakti/Prima/Jainko/Silver shine, makes for Water storage ta nks Astral/Sintex/Supreme/Sheetal, Make for plywood Kitply/Green ply/Archid ply/Centruy ply/ Green panel and make for Glass sheet Saint Gobin/AIS/Modi guard. In case the products which are not available in these brands, other brands as approved in Group one category in any command/ADG of MES will be acceptable and bidder must upload product approval letter of aforesaid authority along with technical bid documents.
  • 7.Make and Model of each item should be mentioned in specification during participation failing which th e bidder will be rejected without any further intimation and no representation on this matter will be entert ained.
  • 8.If bidder submits any fake documents, the department will take legal action against bidder/fir m as per Government rules. If bidder fails to submitted any documents, the buyer has right to reject bids without as signing any reason there over.
  • 9.All documents should be latest and clearly mentioned bid No, date, title seal and signed on every page by bidder. Bidder is also required to upload valid ink signed copy of all documents.
  • 10.The bidder should upload acceptance of ATC on his firm letter head duly mentioned bid No and date.
  • 11.The bidder has to upload scanned copy/ proof of the EMD alogwith the bid and has to ensure delivery o f the hard copy to the buyer before bid end date failing which the bidder will be technically disqualified and no representation will be accepted.
  • 12.Non-compliance of bid terms, Non uploading of required documents, lack of clarity of the specifications , contradiction and supporting literature etc. may lead to rejection .

From the reverse auction

Reverse auction — offer validity

View PDF · p. 3

Participation by the bidder in RA process would be considered as their consent for extension in offer validity by 30 days by the date of RA initiation.

Similar open tenders

Soonest first

Search similar in the explorerFind this tender in the explorer

Open on GeM