Micro & small enterprises (MSE)
Complete exemptionExemption conditions
Yes | Complete
View PDF · p. 3GeMOpenGoodsReverse auction
Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming To IS 778, Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931, Floor Drain Traps (V2), Bathroom Water Shower (V2), Waste Fittings…
Indian Army
Ministry of Defence › Department of Military Affairs
Delivers to
Bareilly, Uttar Pradesh
Overview
11 facts from the tenderMinistry of Defence published this goods tender on GeM on 16 Oct 2026, for Bareilly, Uttar Pradesh. The EMD is ₹1 L. It closes on 17 Oct 2026, 6:00 pm IST. Bid number GEM/2026/R/753506.
From the bid document
TimelineBid → reverse auction
- Bid closed5 Oct 2026 · 1:00 pm
- RA issued15 Oct 2026
- RA startsin 14h 51m16 Oct 2026 · 6:00 pm
- RA ends17 Oct 2026 · 6:00 pm
Parent bid GEM/2026/B/8009219Bid document
Bidding
- Bid type
- Reverse auction
- Evaluation method
- Total value wise evaluation
- Packet type
- Two Packet Bid
- Reverse auction
- Yes, H1-Highest Priced Bid Elimination
- Auction for bid
- GEM/2026/B/8009219
- Total quantity
- 3,596
Buyer
- Created by
- buycon1.mes.be
- Location
- Bareilly · Uttar Pradesh
- Portal
- GeM
Important dates
- Published
- 16 Oct 2026, 6:00 pm IST
- Closes
- 17 Oct 2026, 6:00 pm IST
Bid & reverse auction
This reverse auction is the price round of bid GEM/2026/B/8009219. GeM's auction document lists only the auction, so the items, delivery, eligibility and buyer terms below come from the bid document and are marked From the bid document.
Items & delivery
From the bid document
134 items · Address masked by GeM
Delivery location · all items
***********Bareilly
GeM masks the full address in this document.01Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming To IS 778Quantity14 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवSयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Conformity to IS 778
- Yes
- End Connection
- Flanged Ends
- Nominal Size of Valves (in mm)
- 20 mm
- Pressure Classification
- Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa
- Gate Valve Type
- Solid Wedge Type
- Bonnet Type/Design
- Screwed - in bonnet renewable seats
- Specification Name
- बड के िलए आवSयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Material of Body
- Brass (conforming to DCB 2 of IS 1264)
- Material of Bonnet/Cover Material
- Leaded tin bronze (conforming to LTB 2 of IS 318)
- Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable
- Extruded Brass Rod (conforming to Type 1 or Type 2 (Half Hard) of IS 319)
- Material of Stem, hinge pin and plug
- Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
- Material of Gland Packing
- Hemp and Jute (conforming to IS 5414)
- Minimum Length of Threaded Portion at the end (in mm)
- 10.5 mm
- Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)
- 4.1 mm
- Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)
- 13.0 mm
- Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)
- 9 mm
- Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)
- 32 mm
- End to End Dimensions of Screwed End Valves (in mm)
- As per Table 9 of IS 778
- Face to Face Dimensions of Flanged Valves (in mm)
- NA for Screwed Valves
02)Quantity5Delivery29 daysDetailsClose
- Delivery
- 29 days
Specifications & requirements
- Specification Name
- बड के िलए आवSयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Conformity to IS 778
- Yes
- End Connection
- Screwed Ends
- Nominal Size of Valves (in mm)
- 25 mm
- Pressure Classification
- Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa
- Gate Valve Type
- Solid Wedge Type
- Bonnet Type/Design
- Screwed - on bonnet integral seats
- Material of Body
- Brass (conforming to DCB 2 of IS 1264)
- Material of Bonnet/Cover Material
- Brass (conforming to DCB 2 of IS 1264)
- Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable
- Leaded Tin Bronze (conforming to LTB 2 of IS 318)
- Material of Stem, hinge pin and plug
- Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
- Material of Gland Packing
- Hemp and Jute (conforming to IS 5414)
- Minimum Length of Threaded Portion at the end (in mm)
- 12.0 mm
- Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)
- 4.6 mm
- Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)
- 13.0 mm
- Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)
- 10 mm
- Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)
- 39 mm
- Specification Name
- बड के िलए आवSयक अनुमत मूYय /Bid Requirement (Allowed Values)
- End to End Dimensions of Screwed End Valves (in mm)
- As per Table 9 of IS 778
- Face to Face Dimensions of Flanged Valves (in mm)
- As per Table 11 of IS 778
03Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity110 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवSयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Angle stop valve
- Dimension
- As per table 5 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Material of body, body components, nozzle , bonnet and back nuts
- Brass rods
- Material of inlet tubes
- Copper tubes
- Material of flanges
- Die cast brass
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Forged brass
- Specification Name
- बड के िलए आवSयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Material of circlip, wire locks
- Stainless steel
- Material of 'O' ring , gasket, and seat washer
- Acrylonitrille butadiene rubber (ABR)
- Material of Knob and knob components
- Die cast brass
- Aerating device fitted with tap
- No
- Flow straightening device fitted with tap
- No
- Warranty (in months)
- 6
- The product should be chromium plated
- The product should be chromium plated.
04Floor Drain Traps (V2)Quantity15 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवSयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Material
- Stainless Steel
- Trap Seal Depth (in mm)
- 25 mm
- Removable Grating
- No
- Specification Name
- बड के िलए आवSयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Anti-Insect Feature
- Yes
- Anti-Odor Feature
- Yes
- Corrosion Resistance
- Yes
- Overall Size (Length x Breadth x Height) in mm
- 100 mm x 100 mm x 100 mm
- Flow Rate Capacity
- Medium Duty
- The product should be chromium plated
- The product should be chromium plated.
05Floor Drain Traps (V2)Quantity29 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवSयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Material
- Stainless Steel
- Trap Seal Depth (in mm)
- 50 mm
- Removable Grating
- Yes
- Anti-Insect Feature
- Yes
- Anti-Odor Feature
- Yes
- Specification Name
- बड के िलए आवSयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Corrosion Resistance
- Yes
- Overall Size (Length x Breadth x Height) in mm
- 125 mm x 125 mm x 100 mm
- Flow Rate Capacity
- Heavy Duty
- The product should be chromium plated
- The product should be chromium plated.
06Floor Drain Traps (V2)Quantity29 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवSयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Material
- Stainless Steel
- Trap Seal Depth (in mm)
- 50 mm
- Removable Grating
- Yes
- Anti-Insect Feature
- Yes
- Anti-Odor Feature
- Yes
- Corrosion Resistance
- Yes
- Overall Size (Length x Breadth x Height) in mm
- 150 mm x 150 mm x 100 mm
- Flow Rate Capacity
- Heavy Duty
- The product should be chromium plated
- The product should be chromium plated.
07Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity49 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवSयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Pillar tap
- Dimension
- As per table 3 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Material of body, body components, nozzle , bonnet and back nuts
- Forged brass
- Material of inlet tubes
- Brass tubes
- Material of flanges
- Die cast brass
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Extruded brass rods
- Specification Name
- बड के िलए आवSयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Material of circlip, wire locks
- Stainless steel
- Material of 'O' ring , gasket, and seat washer
- Synthetic butadiene rubber (SBR)
- Material of Knob and knob components
- Cast brass
- Aerating device fitted with tap
- Yes
- Flow straightening device fitted with tap
- No
- Warranty (in months)
- 12
- The product should be chromium plated
- The product should be chromium plated.
08Bathroom Water Shower (V2)Quantity14 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवSयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Type of shower
- Overhead shower (Ceiling mount with shower arm)
- Material of body/face plate
- Brass
- Finish of face plate
- Chrome plated
- Specification Name
- बड के िलए आवSयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Type of Water Flow
- Only Rainfall
- Type of Multiple flow
- NA
- Shape of Shower
- Square
- Size of Shower
- 100 mm
- Overall length of Hand Shower (in mm)
- NA
- Length of Hand Shower Tube (in mt)
- NA
- Diameter of Hand Shower Tube (in mm)
- NA
- Material of Hand Shower Tube
- NA
- Overall length of Shower Arm (in mm)
- 150
- Warranty (in Years)
- 1
- The product should be chromium plated
- The product should be chromium plated.
09Bathroom Water Shower (V2)Quantity64 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवSयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Type of shower
- Overhead shower (Wall mount with shower arm)
- Material of body/face plate
- Stainless Steel
- Finish of face plate
- Chrome plated
- Type of Water Flow
- Only Rainfall
- Type of Multiple flow
- NA
- Shape of Shower
- Square
- Size of Shower
- 150 mm
- Overall length of Hand Shower (in mm)
- NA
- Length of Hand Shower Tube (in mt)
- NA
- Diameter of Hand Shower Tube (in mm)
- NA
- Material of Hand Shower Tube
- NA
- Overall length of Shower Arm (in mm)
- 150
- Warranty (in Years)
- 1
- The product should be chromium plated
- The product should be chromium plated.
10Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity32 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवSयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Stop valve with external thread
- Dimension
- As per table 5 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Material of body, body components, nozzle , bonnet and back nuts
- Brass rods
- Material of inlet tubes
- Brass tubes
- Material of flanges
- Stainless steel sheet
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Forged brass
- Material of circlip, wire locks
- Stainless steel
- Material of 'O' ring , gasket, and seat washer
- Synthetic rubber
- Material of Knob and knob components
- Zinc base alloys
- Aerating device fitted with tap
- No
- Flow straightening device fitted with tap
- No
- Warranty (in months)
- 12
- The product should be chromium plated
- The product should be chromium plated.
11Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity22 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवSयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Stop valve with internal thread
- Dimension
- As per table 5 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Material of body, body components, nozzle , bonnet and back nuts
- Brass rods
- Material of inlet tubes
- Brass tubes
- Material of flanges
- Brass sheet
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Forged brass
- Material of circlip, wire locks
- Phosphor bronze sheet
- Material of 'O' ring , gasket, and seat washer
- Synthetic rubber
- Material of Knob and knob components
- Cast brass
- Aerating device fitted with tap
- No
- Flow straightening device fitted with tap
- No
- Warranty (in months)
- 12
- The product should be chromium plated
- The product should be chromium plated.
12Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity9 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवSयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Stop valve with external thread
- Dimension
- As per table 5 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 20
- Material of body, body components, nozzle , bonnet and back nuts
- Cast brass
- Material of inlet tubes
- Brass tubes
- Material of flanges
- Stainless steel sheet
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Extruded brass rods
- Material of circlip, wire locks
- Phosphor bronze sheet
- Material of 'O' ring , gasket, and seat washer
- Synthetic rubber
- Specification Name
- बड के िलए आवSयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Material of Knob and knob components
- Zinc base alloys
- Aerating device fitted with tap
- No
- Flow straightening device fitted with tap
- No
- Warranty (in months)
- 12
- The product should be chromium plated
- The product should be chromium plated.
13Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity7 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवSयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Stop valve with internal thread
- Dimension
- As per table 5 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 20
- Specification Name
- बड के िलए आवSयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Material of body, body
- Cast brass
- Material of inlet tubes
- Copper tubes
- Material of flanges
- Die cast brass
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Rolled brass rods
- Material of circlip, wire locks
- Phosphor bronze sheet
- Material of 'O' ring , gasket, and seat washer
- Synthetic rubber
- Material of Knob and knob components
- Cast brass
- Aerating device fitted with tap
- Yes
- Flow straightening device fitted with tap
- Yes
- Warranty (in months)
- 12
- The product should be chromium plated
- The product should be chromium plated.
14Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity5 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवSयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Concealed stop valve
- Dimension
- As per table 5 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Material of body, body components, nozzle , bonnet and back nuts
- Forged brass
- Material of inlet tubes
- Brass tubes
- Material of flanges
- Cast brass
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Extruded brass rods
- Material of circlip, wire locks
- Phosphor bronze sheet
- Material of 'O' ring , gasket, and seat washer
- Neoprene rubber
- Material of Knob and knob components
- Cast brass
- Aerating device fitted with tap
- Yes
- Flow straightening device fitted with tap
- No
- Warranty (in months)
- 12
- The product should be chromium plated
- The product should be chromium plated.
15Waste Fittings For Washbasin And Sinks As Per IS 2963Quantity42 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवSयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Material of Waste Fitting
- Leaded Tin Bronze conforming to Grade 2 of IS 318/1962
- Nominal Size
- 32 mm for washbasin
- WARANTEE PERIOD IN NUMBER OF YEARS
- 5
- The product should be chromium plated
- The product should be chromium plated.
16Bathroom Or Toilet Mirror (V3)Quantity21 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवSयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Type of Mirror
- Decorative Mirror
- Mirror Shape
- Square
- Type of Mirror Coating
- Aluminium Coated
- Frame
- With
- Frame Material
- Plastic
- Frame Color
- White
- Mirror Mounting/Fixing System
- Wall Hanging System (Hook/Hanger)
- Width/Diameter of Mirror (inch)
- >12.5 to ?15
- Height/Diameter of Mirror (inch)
- >12.5 to ?15
- Thickness of Mirror (mm)
- >7.5 to ?10
17Ceramic ( Vitreous China ) Flushing Cisterns For Water Closets And Urinals Conforming To IS 774Quantity32 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवSयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Conformity to IS 774
- Yes
- Flushing Device
- Cistern
- Material for Flush Pipe
- Polyethylene Pipe (Conformity to Is 4984)
- Specification Name
- बड के िलए आवSयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Material for Overflow Pipe
- Unplasticized Polyvinyl Chloride (PVC) Pipe (Conformity to Is 4985)
- Cistern Discharge Capacity
- Full Flush (6 ± 0.5 liters) Reduced Flush (3 ± 0.5 liters)
- Generic, Construction & Material
- For Specification Conformity to IS 774 - Yes Flushing Device-Cistern Material for Flush Pipe-Polyethylene Pipe (Conformity to Is 4984) Material for Overflow Pipe-Unplasticized Polyvinyl Chloride (PVC) Pipe (Conformity to Is 4985) Cistern Discharge Capacity-Full Flush (6 ± 0.5 liters) Reduced Flush (3 ± 0.5 liters) Read PVC Cistern fitting kit complete for low level flushing system
18Towel RailQuantity2 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवSयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Rail Material
- PVC Plastic
- Mounting Bracket Material
- PVC Plastic
- Towel Rail Length (in mm) (Tolerance : ± 10 mm)
- 450 mm
- Rail Diameter/Thickness (in mm) (Tolerance : ± 10 mm)
- 22 mm
- Specification Name
- बड के िलए आवSयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Projection from Wall (in
- 60 mm
- Towel Rail Type
- Single Bar
- Bar Shape of Rail
- Flat
- Recommended Load Capacity (in kg)
- Up to 3 kg
- Fixing Hardware Included
- Yes
- Fasteners Material
- Plastic
19Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming To IS 778Quantity37 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवSयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Conformity to IS 778
- Yes
- End Connection
- Screwed Ends
- Nominal Size of Valves (in mm)
- 15 mm
- Pressure Classification
- Class 2 Valve : Suitable for cold working pressure up to 1.6 MPa
- Gate Valve Type
- Solid Wedge Type
- Bonnet Type/Design
- Screwed - in bonnet integral seats
- Material of Body
- Brass (conforming to DCB 2 of IS 1264)
- Material of Bonnet/Cover Material
- Brass (conforming to DCB 2 of IS 1264)
- Specification Name
- बड के िलए आवSयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable
- Brass (conforming to DCB 2 of IS 1264)
- Material of Stem, hinge pin and plug
- Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
- Material of Gland Packing
- Asbestos (conforming to 4687)
- Minimum Length of Threaded Portion at the end (in mm)
- 9.5 mm
- Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)
- 3.7 mm
- Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)
- 11.5 mm
- Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)
- 8 mm
- Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)
- 26 mm
- End to End Dimensions of Screwed End Valves (in mm)
- As per Table 9 of IS 778
- Face to Face Dimensions of Flanged Valves (in mm)
- As per Table 11 of IS 778
20Copper Alloy Taps/Stop Valves (V2) Conforming To IS 8931Quantity210 piecesDelivery30 daysDetailsClose
- Delivery
- 30 days
Specifications & requirements
- Specification Name
- बड के िलए आवSयक अनुमत मूYय /Bid Requirement (Allowed Values)
- Governing Specification
- Conforming to IS 8931
- Item
- Type 1 Bib tap
- Dimension
- As per table 4 of the governing specification
- Nominal Size of bore of pipe to which taps and valves are fitted(in mm)
- 15
- Material of body, body components, nozzle , bonnet and back nuts
- Cast brass
- Material of inlet tubes
- Brass tubes
- Material of flanges
- Stainless steel sheet
- Material of diverter and diverter components
- NA
- Material of spindle, glands, washer plate, nuts, screw and pin
- Extruded brass rods
- Material of circlip, wire locks
- Phosphor bronze sheet
- Material of 'O' ring , gasket, and seat washer
- Synthetic rubber
- Material of Knob and knob components
- Zinc base alloys
- Aerating device fitted with tap
- Yes
- Flow straightening device fitted with tap
- Yes
- Warranty (in months)
- 12
- The product should be chromium plated
- The product should be chromium plated.
21Aluminium Door Handle 100mmQuantity25Delivery30 daysDetailsClose
- Delivery
- 30 days
22Aluminium Door Handle 125mmQuantity28Delivery30 daysDetailsClose
- Delivery
- 30 days
23Aluminium Door Handle 150mmQuantity5Delivery30 daysDetailsClose
- Delivery
- 30 days
24Aluminium Door Stopper Single Rod With Rubber BushQuantity24Delivery30 daysDetailsClose
- Delivery
- 30 days
25Aluminium Sliding Door Bolt Aldrop 200mm LongQuantity25Delivery30 daysDetailsClose
- Delivery
- 30 days
26Aluminium Tower Bolts 100mmQuantity36Delivery30 daysDetailsClose
- Delivery
- 30 days
27Aluminium Tower Bolts 150mmQuantity14Delivery30 daysDetailsClose
- Delivery
- 30 days
28Aluminium Tower Bolts 200mmQuantity15Delivery30 daysDetailsClose
- Delivery
- 30 days
29Brass Bib Tap 15mm External ThreadQuantity61Delivery30 daysDetailsClose
- Delivery
- 30 days
30Brass Bib Tap 15mm Internal ThreadQuantity16Delivery30 daysDetailsClose
- Delivery
- 30 days
31Brass Spindle Square Type 15mmQuantity13Delivery30 daysDetailsClose
- Delivery
- 30 days
32Brush Paint 25mmQuantity7Delivery30 daysDetailsClose
- Delivery
- 30 days
33Brush Paint 50mmQuantity6Delivery30 daysDetailsClose
- Delivery
- 30 days
34Brush Paint 75mmQuantity5Delivery30 daysDetailsClose
- Delivery
- 30 days
35CP Bib Tap 15mm Long BodyQuantity26Delivery30 daysDetailsClose
- Delivery
- 30 days
36CP Bottle TrapQuantity6Delivery30 daysDetailsClose
- Delivery
- 30 days
37CP Connection 15mm BoreQuantity12Delivery30 daysDetailsClose
- Delivery
- 30 days
38CP D Type Handle 100mmQuantity12Delivery30 daysDetailsClose
- Delivery
- 30 days
39CP D Type Handle 75mmQuantity12Delivery30 daysDetailsClose
- Delivery
- 30 days
40CP Extension Nipple 15mm 1 Inch External ThreadQuantity20Delivery30 daysDetailsClose
- Delivery
- 30 days
41CP Extension Nipple 15mm 1.5 Inch External ThreadQuantity20Delivery30 daysDetailsClose
- Delivery
- 30 days
42CP Extension Nipple 15mm 0.75 Inch External ThreadQuantity20Delivery30 daysDetailsClose
- Delivery
- 30 days
43CP Health Faucet 15mm X 1.5mtr PipeQuantity95Delivery30 daysDetailsClose
- Delivery
- 30 days
44CP Pillar Tap With Mixture For Hot And Cold 15mmQuantity18Delivery30 daysDetailsClose
- Delivery
- 30 days
45CP Towel Rail 600x20mmQuantity21Delivery30 daysDetailsClose
- Delivery
- 30 days
46CP Two Way Angle Cock 15mmQuantity4Delivery30 daysDetailsClose
- Delivery
- 30 days
47CP Wall Mixer With Telephonic Shower Arrangement Or Bend Of 15mm BoreQuantity10Delivery30 daysDetailsClose
- Delivery
- 30 days
48Curtain Rod Bracket 25mm DiaQuantity26Delivery30 daysDetailsClose
- Delivery
- 30 days
49Curtain Rod Knob 25mm DiaQuantity27Delivery30 daysDetailsClose
- Delivery
- 30 days
50Cushion For Sofa Set Size 21inch X22 Inch X4 Inch Thick With Coverd FabricQuantity34Delivery30 daysDetailsClose
- Delivery
- 30 days
51Door Closer Aluminium Body Hydraulically Regulated Of Weight 61 To 80 KgsQuantity24Delivery30 daysDetailsClose
- Delivery
- 30 days
52Foam Sheet 6 Feet X3 Feet X100mmQuantity8Delivery30 daysDetailsClose
- Delivery
- 30 days
53Foam Sheet 6 Feet X3 Feet X75mmQuantity9Delivery30 daysDetailsClose
- Delivery
- 30 days
54Galvanized MS Wire Mesh 0.50 Nominal Dia Of 1.18mm And 1.2 Mtr WideQuantity221Delivery30 daysDetailsClose
- Delivery
- 30 days
55Gl Bend Medium With One Socket Screwed 15mm DiaQuantity20Delivery30 daysDetailsClose
- Delivery
- 30 days
56Gl Elbow Medium Grade 15mm Dia ISI MarkedQuantity41Delivery30 daysDetailsClose
- Delivery
- 30 days
57Gl Elbow Medium Grade 20mm Dia ISI MarkedQuantity17Delivery30 daysDetailsClose
- Delivery
- 30 days
58Gl Elbow Reducing Medium Grade ISI Marked Size 20 X15mmQuantity3Delivery30 daysDetailsClose
- Delivery
- 30 days
59Gl Hex Nipple 15mmQuantity8Delivery30 daysDetailsClose
- Delivery
- 30 days
60Gl Nipple Medium Grade 15x100 Mm LongQuantity16Delivery30 daysDetailsClose
- Delivery
- 30 days
61Gl Nipple Medium Grade 15x150 Mm LongQuantity15Delivery30 daysDetailsClose
- Delivery
- 30 days
62Gl Nipple Medium Grade 15x200 Mm LongQuantity9Delivery30 daysDetailsClose
- Delivery
- 30 days
63Gl Nipple Medium Grade 15x300 Mm LongQuantity8Delivery30 daysDetailsClose
- Delivery
- 30 days
64Gl Nipple Medium Grade 15x75 Mm LongQuantity19Delivery30 daysDetailsClose
- Delivery
- 30 days
65Gl Nipple Medium Grade 20x100 Mm LongQuantity16Delivery30 daysDetailsClose
- Delivery
- 30 days
66Gl Nipple Medium Grade 20x150 Mm LongQuantity9Delivery30 daysDetailsClose
- Delivery
- 30 days
67Gl Nipple Medium Grade 20x75 Mm LongQuantity8Delivery30 daysDetailsClose
- Delivery
- 30 days
68Gl Nipple Medium Grade 25x100 Mm LongQuantity13Delivery30 daysDetailsClose
- Delivery
- 30 days
69Gl Socket Medium Grade ISI Marked 15mmQuantity13Delivery30 daysDetailsClose
- Delivery
- 30 days
70Gl Socket Medium Grade ISI Marked 20mmQuantity9Delivery30 daysDetailsClose
- Delivery
- 30 days
71Gl Socket Medium Grade ISI Marked 25mmQuantity6Delivery30 daysDetailsClose
- Delivery
- 30 days
72Gl Socket Reducer 20x15mmQuantity4Delivery30 daysDetailsClose
- Delivery
- 30 days
73Gl Socket Reducer 25x15mmQuantity4Delivery30 daysDetailsClose
- Delivery
- 30 days
74Gl Socket Reducer 25x20mmQuantity3Delivery30 daysDetailsClose
- Delivery
- 30 days
75Gl Tee Equal Medium Grade Screwed ISI 15mmQuantity17Delivery30 daysDetailsClose
- Delivery
- 30 days
76Gl Tee Equal Medium Grade Screwed ISI 20mmQuantity9Delivery30 daysDetailsClose
- Delivery
- 30 days
77Gl Tee Equal Medium Grade Screwed ISI 25mmQuantity2Delivery30 daysDetailsClose
- Delivery
- 30 days
78Gl Union Medium Grade Complete ISI Marked 15mmQuantity17Delivery30 daysDetailsClose
- Delivery
- 30 days
79Gl Union Medium Grade Complete ISI Marked 20mmQuantity22Delivery30 daysDetailsClose
- Delivery
- 30 days
80Handle Soft PU For Chair RevolvingQuantity2Delivery30 daysDetailsClose
- Delivery
- 30 days
81Jet Spray For Europian WCQuantity18Delivery30 daysDetailsClose
- Delivery
- 30 days
82Knob Anodoised 25mm With Screws For DrawerQuantity26Delivery30 daysDetailsClose
- Delivery
- 30 days
83Knob Anodoised 32mm With Screws For DrawerQuantity26Delivery30 daysDetailsClose
- Delivery
- 30 days
84Lock Brass For Drawer W Keys For Table SteelQuantity36Delivery30 daysDetailsClose
- Delivery
- 30 days
85Looking Mirror Of Size 450x 600x5mm Thick With 9mm Plywood BackQuantity29Delivery30 daysDetailsClose
- Delivery
- 30 days
86Looking Mirror 5mm Thick With Ply Wood Back 9mm Thick 375x1200mmQuantity16Delivery30 daysDetailsClose
- Delivery
- 30 days
87Looking Mirror 5mm Thick With Ply Wood Back 9mm Thick 375x750mmQuantity16Delivery30 daysDetailsClose
- Delivery
- 30 days
88Plywood BWR Commercial Grade Of Size 7 Feet X3 Feet X12mmQuantity18Delivery30 daysDetailsClose
- Delivery
- 30 days
89Plywood BWR Commercial Grade Of Size 8feetx4feetx12mmQuantity8Delivery30 daysDetailsClose
- Delivery
- 30 days
90Plywood BWR Commercial Grade Of Size 8feetx4feetx4mmQuantity8Delivery30 daysDetailsClose
- Delivery
- 30 days
91Plywood BWR Commercial Grade Of Size 8feetx4feetx6mmQuantity8Delivery30 daysDetailsClose
- Delivery
- 30 days
92Plywood One Side Teak Face BWR Or Commercial Grade Of Size 8feetx4feet X4mmQuantity7Delivery30 daysDetailsClose
- Delivery
- 30 days
93Plywood One Side Teak Face BWR Or Commercial Grade Of Size 8feetx4feetx6mmQuantity8Delivery30 daysDetailsClose
- Delivery
- 30 days
94Prelaminated MDF Board Size 8feetx4feetx18 Or19 Mm ThickQuantity204Delivery30 daysDetailsClose
- Delivery
- 30 days
95PTMT Angle Stop Cock 15mmQuantity76Delivery30 daysDetailsClose
- Delivery
- 30 days
96PTMT Bib Cock Long Body With Flange 15mmQuantity35Delivery30 daysDetailsClose
- Delivery
- 30 days
97PTMT Bib Tap 15mmQuantity206Delivery30 daysDetailsClose
- Delivery
- 30 days
98PTMT Connection Pipe With Check Nut 450mmQuantity77Delivery30 daysDetailsClose
- Delivery
- 30 days
99PTMT Connection Pipe With Check Nut 600mmQuantity55Delivery30 daysDetailsClose
- Delivery
- 30 days
100PTMT Down Pipe 32mm X 900mm Long Complete For Wash BasinQuantity72Delivery30 daysDetailsClose
- Delivery
- 30 days
101PTMT Flushing Pipe For Low Level Flushing Cistern 32mm DiaQuantity10Delivery30 daysDetailsClose
- Delivery
- 30 days
102PTMT Grating 100mm DiaQuantity9Delivery30 daysDetailsClose
- Delivery
- 30 days
103PTMT Grating 125mm DiaQuantity9Delivery30 daysDetailsClose
- Delivery
- 30 days
104PTMT Grating 140mm DiaQuantity9Delivery30 daysDetailsClose
- Delivery
- 30 days
105PTMT Pillar Tap 15mmQuantity54Delivery30 daysDetailsClose
- Delivery
- 30 days
106PTMT Stop Cock 15mm External ThreadQuantity52Delivery30 daysDetailsClose
- Delivery
- 30 days
107PTMT Stop Cock 15mm Intenal ThreadQuantity28Delivery30 daysDetailsClose
- Delivery
- 30 days
108PTMT Swiveling Shower Rose 15mm With Shower ArmQuantity20Delivery30 daysDetailsClose
- Delivery
- 30 days
109PVC Cistern Low Level 10 LtrsQuantity48Delivery30 daysDetailsClose
- Delivery
- 30 days
110PVC Float Valve 15mm With FittingQuantity87Delivery30 daysDetailsClose
- Delivery
- 30 days
111PVC Float Valve 20mm With FittingQuantity59Delivery30 daysDetailsClose
- Delivery
- 30 days
112PVC Seat Cover Complete With Hinges For WC White ColourQuantity15Delivery30 daysDetailsClose
- Delivery
- 30 days
113PVC Seat For Chair Dinning MAPQuantity6Delivery30 daysDetailsClose
- Delivery
- 30 days
114Red Oxide Primer 1st Quality 4 Ltr PackQuantity4Delivery30 daysDetailsClose
- Delivery
- 30 days
115S S Cotton Plumbing ThreadQuantity4Delivery30 daysDetailsClose
- Delivery
- 30 days
116SS Curtain Rod 20mm 12 Ft LongQuantity10Delivery30 daysDetailsClose
- Delivery
- 30 days
117SS Kitchen Sink Combined With Drainage Board 37 Inchx18inchx8inchQuantity5Delivery30 daysDetailsClose
- Delivery
- 30 days
118Stainless Steel Plate Rack 30inchx30inchx10inchQuantity6Delivery30 daysDetailsClose
- Delivery
- 30 days
119Synthetic Adhesive Fevicol SR 998 In One Kg PackQuantity5Delivery30 daysDetailsClose
- Delivery
- 30 days
120Synthetic Enamel Paint Black Colour 4 Ltr PackQuantity4Delivery30 daysDetailsClose
- Delivery
- 30 days
121Synthetic Enamel Paint Gray Colour 4 Ltr PackQuantity4Delivery30 daysDetailsClose
- Delivery
- 30 days
122Synthetic Enamel Paint Olive Green Colour 4 Ltr PackQuantity4Delivery30 daysDetailsClose
- Delivery
- 30 days
123Synthetic Enamel Paint Silver Colour 4 Ltr PackQuantity4Delivery30 daysDetailsClose
- Delivery
- 30 days
124Synthetic Enamel Paint White Colour 4 Ltr PackQuantity4Delivery30 daysDetailsClose
- Delivery
- 30 days
125Synthetic Enamel Paint White Primer 4 Ltr PackQuantity4Delivery30 daysDetailsClose
- Delivery
- 30 days
126Touch Wood 1 Ltr PackQuantity8Delivery30 daysDetailsClose
- Delivery
- 30 days
127Turpentine Oil 5 Ltr PackQuantity6Delivery30 daysDetailsClose
- Delivery
- 30 days
128Twin Castor Wheel For Chair Revolving Of Size 50mm Dia Set Of 05pcsQuantity2Delivery30 daysDetailsClose
- Delivery
- 30 days
129Two Holes Brass Lock For AlmirahQuantity23Delivery30 daysDetailsClose
- Delivery
- 30 days
130VarnishQuantity21Delivery30 daysDetailsClose
- Delivery
- 30 days
131Vitreous China Wash Hand Basin White 550x400mmQuantity20Delivery30 daysDetailsClose
- Delivery
- 30 days
132Water Sealing Taflon Tape 20mm 10mtr LongQuantity76Delivery30 daysDetailsClose
- Delivery
- 30 days
133Wire Gauge SS 1.2 Mtr Wide Gauge 0.5 Mm Dia Wire And Aperture 1.18mmQuantity30Delivery30 daysDetailsClose
- Delivery
- 30 days
134Door Closer Aluminium Body Hydraulically Regulated Of Weight 61 To 80 KgsQuantity34Delivery30 daysDetailsClose
- Delivery
- 30 days
No matching items. Try another name, code or schedule.
Tender documents
Bid files and supporting documents, linked directly from GeM.
- Reverse auction documentOpen
Auction dates, extension rule and offer validity
- Bid documentOpen
Items, delivery, eligibility and buyer terms: the auction runs on these
- GeM category specificationOpen
Applies to item 1 · From the bid document
- GeM category specificationOpen
Applies to item 2 · From the bid document
- GeM category specificationOpen
Applies to item 3 · From the bid document
- GeM category specificationOpen
Applies to item 4 · From the bid document
- GeM category specificationOpen
Applies to item 5 · From the bid document
- GeM category specificationOpen
Applies to item 6 · From the bid document
- GeM category specificationOpen
Applies to item 7 · From the bid document
- GeM category specificationOpen
Applies to item 8 · From the bid document
- GeM category specificationOpen
Applies to item 9 · From the bid document
- GeM category specificationOpen
Applies to item 10 · From the bid document
- GeM category specificationOpen
Applies to item 11 · From the bid document
- GeM category specificationOpen
Applies to item 12 · From the bid document
- GeM category specificationOpen
Applies to item 13 · From the bid document
- GeM category specificationOpen
Applies to item 14 · From the bid document
- GeM category specificationOpen
Applies to item 15 · From the bid document
- GeM category specificationOpen
Applies to item 16 · From the bid document
- GeM category specificationOpen
Applies to item 17 · From the bid document
- GeM category specificationOpen
Applies to item 18 · From the bid document
- GeM category specificationOpen
Applies to item 19 · From the bid document
- GeM category specificationOpen
Applies to item 20 · From the bid document
- Specification DocumentOpen
Applies to items 21–134 · From the bid document
- BOQ Detail DocumentOpen
Applies to items 21–134 · From the bid document
Policy & contract references
- General terms and conditionsOpen
From the reverse auction
- Public procurement policy — concurrent applicationOpen
From the bid document
- General terms and conditionsOpen
From the bid document
Documents you must submit
- Experience Criteria
- Additional Doc 1 (Requested in ATC)
Eligibility
From the bid document
Experience
2 years
Experience & turnover exemptions
From the reverse auction
Startups
Complete exemptionExemption conditions
Yes | Complete
View PDF · p. 3Exemptions depend on the evidence and conditions specified in the bid.
Preferences & relaxations
From the bid document
- MSE purchase preference
- MII preference
- Class-1/2 local suppliers
- EMD exemption: no
- Inspection required: no
Check each criterion against the tender notice before you bid.
Commercial conditions
From the bid document
- EMD
- ₹100,000
- Performance guarantee
- Not required
- Offer validity
- 90 days
Reverse auction extension
From the reverse auctionIf any seller submits the offer price during last 30 minutes of RA end time, then RA will be automatically extended for next 30 minutes from the last participation time. There is no limit on such RA extension cycle.
Buyer requirements & conditions
Buyer-added conditions from the bid and the reverse-auction documents.
From the bid document
Scope of supply (Bid price to include all cost components) : Only supply of Goods
Buyer Added text based ATC clauses
- (a)The Bidder must provide authorization certificate provided by OEM for the particular Bid number along with date & reference number with validity for primary category products.
- (b)Bid security to be furnished in the form of account payee demand draft . Non- exempted bi dders as per Para 4 XIII (m) (i) to (vii) of GeM T&C to upload scanned copy of demand draft . Origi nal/physical copy of demand draft must reach to office of the HQ CWE Bareilly,U.P.-243001 office within 5 days of bid opening date, failing which the bid may be treated as incomplete & may lead t o rejection of the bid by buyer without making any reference to the seller. No interest will be paid to bidder by any one for whatsoever reasons i.e. EMD/bid security.
- (c)All Item of subject bid should be mandatory ISI/BIS Marked of any reputed make.The bidder sh ould upload the detail of ISI mark with offered make duly signed and stamped by bidder.
- (d)Price detail with make offered in subject bid duly stamped and signed should be attached while participating in the bid otherwise your bid will be rejected. Items Srl no 3 to 15 & 20 of subje ct bid should be chromium plated.
- (e)The items under subject bid shall be layout by the supplier / seller or by Rep during office h ours to the consignee location for the checking of consignment by the BOO. Payment/CRAC action shall be done after receipt of 100% items to the consignee.
- (f)Either OEM or any firm/vendor has not been blacklisted or cancelled order on gem due to bidder’s fault.
- (g)Buyer is liable to be rejecting the bid, if any participant’s/vendor doesn’t upload any of the certificates/documents sought as per BID ATC and Corrigendum if any. The bid must adhere strictl y to the parameters laid out in the bid documentation. Any deviation, however minor, will result in the disqualification of the submission. .
From the reverse auction
Reverse auction — offer validity
View PDF · p. 3Participation by the bidder in RA process would be considered as their consent for extension in offer validity by 30 days by the date of RA initiation.
Similar open tenders
Soonest first- TodayclosesPLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES C…Ministry of Defence · Closes 16 Oct 2026
- TodayclosesCopper Alloy Gate Valve For Waterworks Purpose (V2) Conforming To IS 778, (Eमशः (ेणी 1 और…Ministry of Defence · Closes 16 Oct 2026
- 1 dayleftCopper Alloy Taps/Stop Valves (V2) Conforming To IS 8931, Health Faucet, PLASTIC BIB TAPS…Ministry of Defence · Closes 17 Oct 2026
- 1 dayleftCopper Alloy Taps/Stop Valves (V2) Conforming To IS 8931, (Mमशः 3ेणी 1 और 3ेणी 2 के 1थानी…Ministry of Defence · Closes 17 Oct 2026
- 3 daysleftBR ITEMSMinistry of Defence · Closes 19 Oct 2026
- 3 daysleftCopper Alloy Taps/Stop Valves (V2) Conforming To IS 8931, Waste Fittings For Washbasin An…Ministry of Defence · Closes 19 Oct 2026
- 8 daysleftRotational Moulded Polyethylene Water Storage Tanks (V3) Conforming To IS 12701, Bathroom…Ministry of Defence · Closes 24 Oct 2026
- 8 daysleftPLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES C…Ministry of Defence · Closes 24 Oct 2026
Search similar in the explorerFind this tender in the explorer